w1: ds2760_battery: add support for sleep mode feature
Daniel Mack [Tue, 28 Apr 2009 08:55:02 +0000 (10:55 +0200)]
This adds support for ds2760's sleep mode feature. With this feature
enabled, the chip enters a deep sleep mode and disconnects from the
battery when the w1 line is held down for more than 2 seconds.

This new behaviour can be switched on and off using a new module
parameter.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>

drivers/power/ds2760_battery.c
drivers/w1/slaves/w1_ds2760.h

index 9331009..520b5c4 100644 (file)
@@ -62,6 +62,10 @@ static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
 
+static unsigned int pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
 static int rated_capacities[] = {
@@ -259,6 +263,17 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)
                power_supply_changed(&di->bat);
 }
 
+static void ds2760_battery_write_status(struct ds2760_device_info *di,
+                                       char status)
+{
+       if (status == di->raw[DS2760_STATUS_REG])
+               return;
+
+       w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
+       w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+       w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+}
+
 static void ds2760_battery_work(struct work_struct *work)
 {
        struct ds2760_device_info *di = container_of(work,
@@ -342,6 +357,7 @@ static enum power_supply_property ds2760_battery_props[] = {
 
 static int ds2760_battery_probe(struct platform_device *pdev)
 {
+       char status;
        int retval = 0;
        struct ds2760_device_info *di;
 
@@ -371,6 +387,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
                goto batt_failed;
        }
 
+       /* enable sleep mode feature */
+       ds2760_battery_read_status(di);
+       status = di->raw[DS2760_STATUS_REG];
+       if (pmod_enabled)
+               status |= DS2760_STATUS_PMOD;
+       else
+               status &= ~DS2760_STATUS_PMOD;
+
+       ds2760_battery_write_status(di, status);
+
        INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
        di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
        if (!di->monitor_wqueue) {
index ea39419..58e7741 100644 (file)
 
 #define DS2760_PROTECTION_REG          0x00
 #define DS2760_STATUS_REG              0x01
+       #define DS2760_STATUS_IE        (1 << 2)
+       #define DS2760_STATUS_SWEN      (1 << 3)
+       #define DS2760_STATUS_RNAOP     (1 << 4)
+       #define DS2760_STATUS_PMOD      (1 << 5)
 #define DS2760_EEPROM_REG              0x07
 #define DS2760_SPECIAL_FEATURE_REG     0x08
 #define DS2760_VOLTAGE_MSB             0x0c
@@ -38,6 +42,7 @@
 #define DS2760_EEPROM_BLOCK0           0x20
 #define DS2760_ACTIVE_FULL             0x20
 #define DS2760_EEPROM_BLOCK1           0x30
+#define DS2760_STATUS_WRITE_REG                0x31
 #define DS2760_RATED_CAPACITY          0x32
 #define DS2760_CURRENT_OFFSET_BIAS     0x33
 #define DS2760_ACTIVE_EMPTY            0x3b