can: sja1000: fix define conflict on SH
Marc Kleine-Budde [Wed, 27 Mar 2013 10:36:42 +0000 (11:36 +0100)]
commit f901b6bc404b67d96eca739857c097e022727b71 upstream.

Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:

    drivers/net/can/sja1000/sja1000.h:59:0: warning:
        "REG_SR" redefined [enabled by default]
    arch/sh/include/asm/ptrace_32.h:25:0: note:
         this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/can/sja1000/plx_pci.c
drivers/net/can/sja1000/sja1000.c
drivers/net/can/sja1000/sja1000.h

index a227586..ee280b2 100644 (file)
@@ -329,7 +329,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
         */
        if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
            REG_CR_BASICCAN_INITIAL &&
-           (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+           (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
            (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
                flag = 1;
 
@@ -341,7 +341,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
         * See states on p. 23 of the Datasheet.
         */
        if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
-           priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+           priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
            priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
                return flag;
 
index 5e10472..c2309ec 100644 (file)
@@ -91,7 +91,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
         */
        spin_lock_irqsave(&priv->cmdreg_lock, flags);
        priv->write_reg(priv, REG_CMR, val);
-       priv->read_reg(priv, REG_SR);
+       priv->read_reg(priv, SJA1000_REG_SR);
        spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
@@ -496,7 +496,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 
        while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
                n++;
-               status = priv->read_reg(priv, REG_SR);
+               status = priv->read_reg(priv, SJA1000_REG_SR);
                /* check for absent controller due to hw unplug */
                if (status == 0xFF && sja1000_is_absent(priv))
                        return IRQ_NONE;
@@ -515,7 +515,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
                        /* receive interrupt */
                        while (status & SR_RBS) {
                                sja1000_rx(dev);
-                               status = priv->read_reg(priv, REG_SR);
+                               status = priv->read_reg(priv, SJA1000_REG_SR);
                                /* check for absent controller */
                                if (status == 0xFF && sja1000_is_absent(priv))
                                        return IRQ_NONE;
index 23fff06..2a79543 100644 (file)
@@ -56,7 +56,7 @@
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
 #define REG_MOD                0x00
 #define REG_CMR                0x01
-#define REG_SR         0x02
+#define SJA1000_REG_SR         0x02
 #define REG_IR         0x03
 #define REG_IER                0x04
 #define REG_ALC                0x0B