spi: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:14:19 +0000 (02:14 -0700)]
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/spi/omap_uwire.c
drivers/spi/spi_bitbang.c
drivers/spi/spi_mpc83xx.c
drivers/spi/spi_s3c24xx.c
drivers/spi/xilinx_spi.c

index 5f00bd6..d9ae111 100644 (file)
@@ -151,7 +151,7 @@ static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch)
                if (time_after(jiffies, max_jiffies)) {
                        printk(KERN_ERR "%s: timeout. reg=%#06x "
                                        "mask=%#06x val=%#06x\n",
-                              __FUNCTION__, w, mask, val);
+                              __func__, w, mask, val);
                        return -1;
                }
                c++;
@@ -437,7 +437,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
        }
        omap_uwire_configure_mode(spi->chip_select, flags);
        pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n",
-                       __FUNCTION__, flags,
+                       __func__, flags,
                        clk_get_rate(uwire->ck) / 1000,
                        rate / 1000);
        status = 0;
index 71e8814..96cc39e 100644 (file)
@@ -214,7 +214,7 @@ int spi_bitbang_setup(struct spi_device *spi)
                return retval;
 
        dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-                       __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+                       __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
                        spi->bits_per_word, 2 * cs->nsecs);
 
        /* NOTE we _need_ to call chipselect() early, ideally with adapter
index be15a62..189f706 100644 (file)
@@ -310,7 +310,7 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
                return retval;
 
        dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
-               __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+               __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
                spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
 
        /* NOTE we _need_ to call chipselect() early, ideally with adapter
index b7476b8..34bfb7d 100644 (file)
@@ -169,7 +169,7 @@ static int s3c24xx_spi_setup(struct spi_device *spi)
        }
 
        dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
-               __FUNCTION__, spi->mode, spi->bits_per_word,
+               __func__, spi->mode, spi->bits_per_word,
                spi->max_speed_hz);
 
        return 0;
index cf6aef3..113a046 100644 (file)
@@ -151,13 +151,13 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
        hz = (t) ? t->speed_hz : spi->max_speed_hz;
        if (bits_per_word != 8) {
                dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-                       __FUNCTION__, bits_per_word);
+                       __func__, bits_per_word);
                return -EINVAL;
        }
 
        if (hz && xspi->speed_hz > hz) {
                dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
-                       __FUNCTION__, hz);
+                       __func__, hz);
                return -EINVAL;
        }
 
@@ -181,7 +181,7 @@ static int xilinx_spi_setup(struct spi_device *spi)
 
        if (spi->mode & ~MODEBITS) {
                dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-                       __FUNCTION__, spi->mode & ~MODEBITS);
+                       __func__, spi->mode & ~MODEBITS);
                return -EINVAL;
        }
 
@@ -190,7 +190,7 @@ static int xilinx_spi_setup(struct spi_device *spi)
                return retval;
 
        dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-               __FUNCTION__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+               __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
 
        return 0;
 }