The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
*
* Copyright (c) 2007 Ben Dooks
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
- * S3C24XX PWM device core
+ * S3C series PWM device core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/pwm.h>
#include <mach/irqs.h>
+#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o