omap3: rx51: Add wl1251 wlan driver support
Kalle Valo [Thu, 19 Nov 2009 02:41:06 +0000 (18:41 -0800)]
wl1251 is connected to the SPI bus in rx51, add support for this.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-rx51-peripherals.c

index fb5988c..15ce651 100644 (file)
@@ -14,6 +14,7 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/clk.h>
 #define SYSTEM_REV_B_USES_VAUX3        0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
+#define RX51_WL1251_POWER_GPIO         87
+#define RX51_WL1251_IRQ_GPIO           42
+
+/* list all spi devices here */
+enum {
+       RX51_SPI_WL1251,
+};
+
+static struct wl12xx_platform_data wl1251_pdata;
+
+static struct omap2_mcspi_device_config wl1251_mcspi_config = {
+       .turbo_mode     = 0,
+       .single_channel = 1,
+};
+
+static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
+       [RX51_SPI_WL1251] = {
+               .modalias               = "wl1251",
+               .bus_num                = 4,
+               .chip_select            = 0,
+               .max_speed_hz           = 48000000,
+               .mode                   = SPI_MODE_2,
+               .controller_data        = &wl1251_mcspi_config,
+               .platform_data          = &wl1251_pdata,
+       },
+};
+
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 
 #define RX51_GPIO_CAMERA_LENS_COVER    110
@@ -617,11 +645,64 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void rx51_wl1251_set_power(bool enable)
+{
+       gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
+}
+
+static void __init rx51_init_wl1251(void)
+{
+       int irq, ret;
+
+       ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
+       if (ret < 0)
+               goto error;
+
+       ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
+       if (ret < 0)
+               goto err_power;
+
+       ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
+       if (ret < 0)
+               goto err_power;
+
+       ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
+       if (ret < 0)
+               goto err_irq;
+
+       irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
+       if (irq < 0)
+               goto err_irq;
+
+       wl1251_pdata.set_power = rx51_wl1251_set_power;
+       rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
+
+       return;
+
+err_irq:
+       gpio_free(RX51_WL1251_IRQ_GPIO);
+
+err_power:
+       gpio_free(RX51_WL1251_POWER_GPIO);
+
+error:
+       printk(KERN_ERR "wl1251 board initialisation failed\n");
+       wl1251_pdata.set_power = NULL;
+
+       /*
+        * Now rx51_peripherals_spi_board_info[1].irq is zero and
+        * set_power is null, and wl1251_probe() will fail.
+        */
+}
+
 void __init rx51_peripherals_init(void)
 {
        rx51_i2c_init();
        board_onenand_init();
        board_smc91x_init();
        rx51_add_gpio_keys();
+       rx51_init_wl1251();
+       spi_register_board_info(rx51_peripherals_spi_board_info,
+                               ARRAY_SIZE(rx51_peripherals_spi_board_info));
 }