[MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users
Atsushi Nemoto [Thu, 7 Dec 2006 16:55:07 +0000 (01:55 +0900)]
Now that i8259A_chip uses new irq flow handler select
GENERIC_HARDIRQS_NO__DO_IRQ on some more platforms.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
arch/mips/vr41xx/Kconfig
arch/mips/vr41xx/nec-cmbvr4133/irq.c

index 7078bf4..e58928a 100644 (file)
@@ -165,6 +165,7 @@ config MIPS_COBALT
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
        select SYS_SUPPORTS_LITTLE_ENDIAN
+       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config MACH_DECSTATION
        bool "DECstations"
@@ -225,6 +226,7 @@ config MACH_JAZZ
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
        select SYS_SUPPORTS_100HZ
+       select GENERIC_HARDIRQS_NO__DO_IRQ
        help
         This a family of machines based on the MIPS R4030 chipset which was
         used by several vendors to build RISC/os and Windows NT workstations.
@@ -482,6 +484,7 @@ config MACH_VR41XX
        select SYS_HAS_CPU_VR41XX
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PMC_YOSEMITE
        bool "PMC-Sierra Yosemite eval board"
@@ -515,6 +518,7 @@ config QEMU
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select ARCH_SPARSEMEM_ENABLE
+       select GENERIC_HARDIRQS_NO__DO_IRQ
        help
          Qemu is a software emulator which among other architectures also
          can simulate a MIPS32 4Kc system.  This patch adds support for the
@@ -754,6 +758,7 @@ config TOSHIBA_RBTX4927
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
        select TOSHIBA_BOARDS
+       select GENERIC_HARDIRQS_NO__DO_IRQ
        help
          This Toshiba board is based on the TX4927 processor. Say Y here to
          support this machine type
@@ -773,6 +778,7 @@ config TOSHIBA_RBTX4938
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_BIG_ENDIAN
        select TOSHIBA_BOARDS
+       select GENERIC_HARDIRQS_NO__DO_IRQ
        help
          This Toshiba board is based on the TX4938 processor. Say Y here to
          support this machine type
index 5a5ea6c..b54b529 100644 (file)
@@ -158,7 +158,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
 #define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE    ( 1 << 23 )
 #define TOSHIBA_RBTX4927_IRQ_ISA_DISABLE   ( 1 << 24 )
 #define TOSHIBA_RBTX4927_IRQ_ISA_MASK      ( 1 << 25 )
-#define TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ    ( 1 << 26 )
 
 #define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
 #endif
@@ -175,7 +174,6 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
 //                                                 | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
 //                                                 | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
 //                                                 | TOSHIBA_RBTX4927_IRQ_ISA_MASK
-//                                                 | TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ
     );
 #endif
 
@@ -226,7 +224,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
 static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq);
 static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq);
 static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq);
-static void toshiba_rbtx4927_irq_isa_end(unsigned int irq);
 #endif
 
 #define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
@@ -249,7 +246,6 @@ static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
        .mask = toshiba_rbtx4927_irq_isa_disable,
        .mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
        .unmask = toshiba_rbtx4927_irq_isa_enable,
-       .end = toshiba_rbtx4927_irq_isa_end,
 };
 #endif
 
@@ -402,7 +398,8 @@ static void __init toshiba_rbtx4927_irq_isa_init(void)
 
        for (i = TOSHIBA_RBTX4927_IRQ_ISA_BEG;
             i <= TOSHIBA_RBTX4927_IRQ_ISA_END; i++)
-               set_irq_chip(i, &toshiba_rbtx4927_irq_isa_type);
+               set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_isa_type,
+                                        handle_level_irq);
 
        setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC,
                  &toshiba_rbtx4927_irq_isa_master);
@@ -470,26 +467,6 @@ static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq)
 #endif
 
 
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_end(unsigned int irq)
-{
-       TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ,
-                                    "irq=%d\n", irq);
-
-       if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
-           || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
-               TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-                                            "bad irq=%d\n", irq);
-               panic("\n");
-       }
-
-       if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-               toshiba_rbtx4927_irq_isa_enable(irq);
-       }
-}
-#endif
-
-
 void __init arch_init_irq(void)
 {
        extern void tx4927_irq_init(void);
index c8dfd80..92f41f6 100644 (file)
@@ -6,7 +6,6 @@ config CASIO_E55
        select ISA
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config IBM_WORKPAD
        bool "Support for IBM WorkPad z50"
@@ -16,7 +15,6 @@ config IBM_WORKPAD
        select ISA
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config NEC_CMBVR4133
        bool "Support for NEC CMB-VR4133"
@@ -41,7 +39,6 @@ config TANBAC_TB022X
        select IRQ_CPU
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
        help
          The TANBAC VR4131 multichip module(TB0225) and
          the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
@@ -74,7 +71,6 @@ config VICTOR_MPC30X
        select IRQ_CPU
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config ZAO_CAPCELLA
        bool "Support for ZAO Networks Capcella"
@@ -84,7 +80,6 @@ config ZAO_CAPCELLA
        select IRQ_CPU
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PCI_VR41XX
        bool "Add PCI control unit support of NEC VR4100 series"
index a039bb7..128ed8d 100644 (file)
@@ -45,19 +45,12 @@ static void ack_i8259_irq(unsigned int irq)
        mask_and_ack_8259A(irq - I8259_IRQ_BASE);
 }
 
-static void end_i8259_irq(unsigned int irq)
-{
-       if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-               enable_8259A_irq(irq - I8259_IRQ_BASE);
-}
-
 static struct irq_chip i8259_irq_type = {
        .typename       = "XT-PIC",
        .ack            = ack_i8259_irq,
        .mask           = disable_i8259_irq,
        .mask_ack       = ack_i8259_irq,
        .unmask         = enable_i8259_irq,
-       .end            = end_i8259_irq,
 };
 
 static int i8259_get_irq_number(int irq)
@@ -92,7 +85,7 @@ void __init rockhopper_init_irq(void)
        }
 
        for (i = I8259_IRQ_BASE; i <= I8259_IRQ_LAST; i++)
-               set_irq_chip(i, &i8259_irq_type);
+               set_irq_chip_and_handler(i, &i8259_irq_type, handle_level_irq);
 
        setup_irq(I8259_SLAVE_IRQ, &i8259_slave_cascade);