hwmon: (it87) Prevent power-off on Shuttle SN68PT
Jean Delvare [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/hwmon/it87.c

index f113308..d793cc0 100644 (file)
@@ -46,6 +46,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
 #include <asm/io.h>
 
 #define DRVNAME "it87"
@@ -236,6 +238,8 @@ struct it87_sio_data {
        /* Values read from Super-I/O config space */
        u8 revision;
        u8 vid_value;
+       /* Values set based on DMI strings */
+       u8 skip_pwm;
 };
 
 /* For each registered chip, we need to keep some data in memory.
@@ -964,6 +968,7 @@ static int __init it87_find(unsigned short *address,
 {
        int err = -ENODEV;
        u16 chip_type;
+       const char *board_vendor, *board_name;
 
        superio_enter();
        chip_type = force_id ? force_id : superio_inw(DEVID);
@@ -1022,6 +1027,24 @@ static int __init it87_find(unsigned short *address,
                        pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
        }
 
+       /* Disable specific features based on DMI strings */
+       board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+       board_name = dmi_get_system_info(DMI_BOARD_NAME);
+       if (board_vendor && board_name) {
+               if (strcmp(board_vendor, "nVIDIA") == 0
+                && strcmp(board_name, "FN68PT") == 0) {
+                       /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+                          connected to a fan, but to something else. One user
+                          has reported instant system power-off when changing
+                          the PWM2 duty cycle, so we disable it.
+                          I use the board name string as the trigger in case
+                          the same board is ever used in other systems. */
+                       pr_info("it87: Disabling pwm2 due to "
+                               "hardware constraints\n");
+                       sio_data->skip_pwm = (1 << 1);
+               }
+       }
+
 exit:
        superio_exit();
        return err;
@@ -1168,25 +1191,33 @@ static int __devinit it87_probe(struct platform_device *pdev)
        }
 
        if (enable_pwm_interface) {
-               if ((err = device_create_file(dev,
-                    &sensor_dev_attr_pwm1_enable.dev_attr))
-                || (err = device_create_file(dev,
-                    &sensor_dev_attr_pwm2_enable.dev_attr))
-                || (err = device_create_file(dev,
-                    &sensor_dev_attr_pwm3_enable.dev_attr))
-                || (err = device_create_file(dev,
-                    &sensor_dev_attr_pwm1.dev_attr))
-                || (err = device_create_file(dev,
-                    &sensor_dev_attr_pwm2.dev_attr))
-                || (err = device_create_file(dev,
-                    &sensor_dev_attr_pwm3.dev_attr))
-                || (err = device_create_file(dev,
-                    &dev_attr_pwm1_freq))
-                || (err = device_create_file(dev,
-                    &dev_attr_pwm2_freq))
-                || (err = device_create_file(dev,
-                    &dev_attr_pwm3_freq)))
-                       goto ERROR4;
+               if (!(sio_data->skip_pwm & (1 << 0))) {
+                       if ((err = device_create_file(dev,
+                            &sensor_dev_attr_pwm1_enable.dev_attr))
+                        || (err = device_create_file(dev,
+                            &sensor_dev_attr_pwm1.dev_attr))
+                        || (err = device_create_file(dev,
+                            &dev_attr_pwm1_freq)))
+                               goto ERROR4;
+               }
+               if (!(sio_data->skip_pwm & (1 << 1))) {
+                       if ((err = device_create_file(dev,
+                            &sensor_dev_attr_pwm2_enable.dev_attr))
+                        || (err = device_create_file(dev,
+                            &sensor_dev_attr_pwm2.dev_attr))
+                        || (err = device_create_file(dev,
+                            &dev_attr_pwm2_freq)))
+                               goto ERROR4;
+               }
+               if (!(sio_data->skip_pwm & (1 << 2))) {
+                       if ((err = device_create_file(dev,
+                            &sensor_dev_attr_pwm3_enable.dev_attr))
+                        || (err = device_create_file(dev,
+                            &sensor_dev_attr_pwm3.dev_attr))
+                        || (err = device_create_file(dev,
+                            &dev_attr_pwm3_freq)))
+                               goto ERROR4;
+               }
        }
 
        if (data->type == it8712 || data->type == it8716
@@ -1546,6 +1577,7 @@ static int __init sm_it87_init(void)
        unsigned short isa_address=0;
        struct it87_sio_data sio_data;
 
+       memset(&sio_data, 0, sizeof(struct it87_sio_data));
        err = it87_find(&isa_address, &sio_data);
        if (err)
                return err;