b43: Convert to use of the new SPROM structure
Larry Finger [Fri, 9 Nov 2007 22:57:18 +0000 (16:57 -0600)]
The b43 driver is modified to use the new SPROM structure.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/leds.c
drivers/net/wireless/b43/lo.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/phy.c
drivers/net/wireless/b43/wa.c
drivers/net/wireless/b43/xmit.c

index e04eba1..4b590d8 100644 (file)
@@ -190,10 +190,10 @@ void b43_leds_init(struct b43_wldev *dev)
        enum b43_led_behaviour behaviour;
        bool activelow;
 
-       sprom[0] = bus->sprom.r1.gpio0;
-       sprom[1] = bus->sprom.r1.gpio1;
-       sprom[2] = bus->sprom.r1.gpio2;
-       sprom[3] = bus->sprom.r1.gpio3;
+       sprom[0] = bus->sprom.gpio0;
+       sprom[1] = bus->sprom.gpio1;
+       sprom[2] = bus->sprom.gpio2;
+       sprom[3] = bus->sprom.gpio3;
 
        for (i = 0; i < 4; i++) {
                if (sprom[i] == 0xFF) {
index 0a50fd5..88f35e6 100644 (file)
@@ -264,8 +264,8 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
                rfover |= pga;
                rfover |= lna;
                rfover |= trsw_rx;
-               if ((dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
-                   phy->rev > 6)
+               if ((dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
+                   && phy->rev > 6)
                        rfover |= B43_PHY_RFOVERVAL_EXTLNA;
 
                b43_phy_write(dev, B43_PHY_PGACTL, 0xE300);
@@ -634,7 +634,7 @@ static void lo_measure_setup(struct b43_wldev *dev,
                              & 0xFFFC);
                if (phy->type == B43_PHYTYPE_G) {
                        if ((phy->rev >= 7) &&
-                           (sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                           (sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                                b43_phy_write(dev, B43_PHY_RFOVER, 0x933);
                        } else {
                                b43_phy_write(dev, B43_PHY_RFOVER, 0x133);
index 72321d8..16b413d 100644 (file)
@@ -1924,7 +1924,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
                mask |= 0x0180;
                set |= 0x0180;
        }
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
                b43_write16(dev, B43_MMIO_GPIO_MASK,
                            b43_read16(dev, B43_MMIO_GPIO_MASK)
                            | 0x0200);
@@ -2289,7 +2289,7 @@ static void b43_periodic_every60sec(struct b43_wldev *dev)
 
        if (!b43_has_hardware_pctl(phy))
                b43_lo_g_ctl_mark_all_unused(dev);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                b43_mac_suspend(dev);
                b43_calc_nrssi_slope(dev);
                if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
@@ -3208,13 +3208,13 @@ static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
        struct ssb_sprom *sprom = &dev->dev->bus->sprom;
        u32 hf;
 
-       if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST))
+       if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
                return;
        if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
                return;
 
        hf = b43_hf_read(dev);
-       if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD)
+       if (sprom->boardflags_lo & B43_BFL_BTCMOD)
                hf |= B43_HF_BTCOEXALT;
        else
                hf |= B43_HF_BTCOEX;
@@ -3345,7 +3345,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
                hf |= B43_HF_SYMW;
                if (phy->rev == 1)
                        hf |= B43_HF_GDCW;
-               if (sprom->r1.boardflags_lo & B43_BFL_PACTRL)
+               if (sprom->boardflags_lo & B43_BFL_PACTRL)
                        hf |= B43_HF_OFDMPABOOST;
        } else if (phy->type == B43_PHYTYPE_B) {
                hf |= B43_HF_SYMW;
@@ -3862,20 +3862,20 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
        /* boardflags workarounds */
        if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
            bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
-               bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST;
+               bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
        if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
            bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
-               bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL;
+               bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
 
        /* Handle case when gain is not set in sprom */
-       if (bus->sprom.r1.antenna_gain_a == 0xFF)
-               bus->sprom.r1.antenna_gain_a = 2;
-       if (bus->sprom.r1.antenna_gain_bg == 0xFF)
-               bus->sprom.r1.antenna_gain_bg = 2;
+       if (bus->sprom.antenna_gain_a == 0xFF)
+               bus->sprom.antenna_gain_a = 2;
+       if (bus->sprom.antenna_gain_bg == 0xFF)
+               bus->sprom.antenna_gain_bg = 2;
 
        /* Convert Antennagain values to Q5.2 */
-       bus->sprom.r1.antenna_gain_a <<= 2;
-       bus->sprom.r1.antenna_gain_bg <<= 2;
+       bus->sprom.antenna_gain_a <<= 2;
+       bus->sprom.antenna_gain_bg <<= 2;
 }
 
 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
@@ -3908,10 +3908,10 @@ static int b43_wireless_init(struct ssb_device *dev)
        hw->max_noise = -110;
        hw->queues = 1;         /* FIXME: hardware has more queues */
        SET_IEEE80211_DEV(hw, dev->dev);
-       if (is_valid_ether_addr(sprom->r1.et1mac))
-               SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+       if (is_valid_ether_addr(sprom->et1mac))
+               SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
        else
-               SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+               SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
        /* Get and initialize struct b43_wl */
        wl = hw_to_b43_wl(hw);
index 7eb71d7..facc01c 100644 (file)
@@ -903,7 +903,7 @@ static void b43_phy_inita(struct b43_wldev *dev)
        }
 
        if ((phy->type == B43_PHYTYPE_G) &&
-           (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)) {
+           (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
                b43_phy_write(dev, B43_PHY_OFDM(0x6E),
                                  (b43_phy_read(dev, B43_PHY_OFDM(0x6E))
                                   & 0xE000) | 0x3CF);
@@ -1006,7 +1006,7 @@ static void b43_phy_initb4(struct b43_wldev *dev)
        if (phy->radio_ver == 0x2050)
                b43_phy_write(dev, 0x002A, 0x88C2);
        b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                b43_calc_nrssi_slope(dev);
                b43_calc_nrssi_threshold(dev);
        }
@@ -1153,7 +1153,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                b43_radio_write16(dev, 0x5A, 0x88);
                b43_radio_write16(dev, 0x5B, 0x6B);
                b43_radio_write16(dev, 0x5C, 0x0F);
-               if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_ALTIQ) {
+               if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
                        b43_radio_write16(dev, 0x5D, 0xFA);
                        b43_radio_write16(dev, 0x5E, 0xD8);
                } else {
@@ -1245,7 +1245,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                b43_phy_write(dev, 0x0062, 0x0007);
                b43_radio_init2050(dev);
                b43_lo_g_measure(dev);
-               if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+               if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                        b43_calc_nrssi_slope(dev);
                        b43_calc_nrssi_threshold(dev);
                }
@@ -1365,7 +1365,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev)
        b43_phy_write(dev, B43_PHY_RFOVERVAL,
                      b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF);
 
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
                if (phy->rev >= 7) {
                        b43_phy_write(dev, B43_PHY_RFOVER,
                                      b43_phy_read(dev, B43_PHY_RFOVER)
@@ -1532,7 +1532,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                                       & 0x0FFF) | (phy->lo_control->
                                                    tx_bias << 12));
                }
-               if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)
+               if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
                        b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x8075);
                else
                        b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x807F);
@@ -1546,7 +1546,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
        }
 
-       if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+       if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
                /* The specs state to update the NRSSI LT with
                 * the value 0x7FFFFFFF here. I think that is some weird
                 * compiler optimization in the original driver.
@@ -1756,16 +1756,15 @@ void b43_phy_xmitpower(struct b43_wldev *dev)
                        estimated_pwr =
                            b43_phy_estimate_power_out(dev, average);
 
-                       max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
-                       if ((dev->dev->bus->sprom.r1.
-                            boardflags_lo & B43_BFL_PACTRL)
-                           && (phy->type == B43_PHYTYPE_G))
+                       max_pwr = dev->dev->bus->sprom.maxpwr_bg;
+                       if ((dev->dev->bus->sprom.boardflags_lo
+                           & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
                                max_pwr -= 0x3;
                        if (unlikely(max_pwr <= 0)) {
                                b43warn(dev->wl,
                                        "Invalid max-TX-power value in SPROM.\n");
                                max_pwr = 60;   /* fake it */
-                               dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+                               dev->dev->bus->sprom.maxpwr_bg = max_pwr;
                        }
 
                        /*TODO:
@@ -1823,7 +1822,7 @@ void b43_phy_xmitpower(struct b43_wldev *dev)
                                                    B43_TXCTL_TXMIX;
                                                rfatt += 2;
                                                bbatt += 2;
-                                       } else if (dev->dev->bus->sprom.r1.
+                                       } else if (dev->dev->bus->sprom.
                                                   boardflags_lo &
                                                   B43_BFL_PACTRL) {
                                                bbatt += 4 * (rfatt - 2);
@@ -1899,13 +1898,13 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
        s8 *dyn_tssi2dbm;
 
        if (phy->type == B43_PHYTYPE_A) {
-               pab0 = (s16) (dev->dev->bus->sprom.r1.pa1b0);
-               pab1 = (s16) (dev->dev->bus->sprom.r1.pa1b1);
-               pab2 = (s16) (dev->dev->bus->sprom.r1.pa1b2);
+               pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
+               pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
+               pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
        } else {
-               pab0 = (s16) (dev->dev->bus->sprom.r1.pa0b0);
-               pab1 = (s16) (dev->dev->bus->sprom.r1.pa0b1);
-               pab2 = (s16) (dev->dev->bus->sprom.r1.pa0b2);
+               pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
+               pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
+               pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
        }
 
        if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
@@ -1918,17 +1917,17 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
            pab0 != -1 && pab1 != -1 && pab2 != -1) {
                /* The pabX values are set in SPROM. Use them. */
                if (phy->type == B43_PHYTYPE_A) {
-                       if ((s8) dev->dev->bus->sprom.r1.itssi_a != 0 &&
-                           (s8) dev->dev->bus->sprom.r1.itssi_a != -1)
+                       if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
+                           (s8) dev->dev->bus->sprom.itssi_a != -1)
                                phy->tgt_idle_tssi =
-                                   (s8) (dev->dev->bus->sprom.r1.itssi_a);
+                                   (s8) (dev->dev->bus->sprom.itssi_a);
                        else
                                phy->tgt_idle_tssi = 62;
                } else {
-                       if ((s8) dev->dev->bus->sprom.r1.itssi_bg != 0 &&
-                           (s8) dev->dev->bus->sprom.r1.itssi_bg != -1)
+                       if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
+                           (s8) dev->dev->bus->sprom.itssi_bg != -1)
                                phy->tgt_idle_tssi =
-                                   (s8) (dev->dev->bus->sprom.r1.itssi_bg);
+                                   (s8) (dev->dev->bus->sprom.itssi_bg);
                        else
                                phy->tgt_idle_tssi = 62;
                }
@@ -2834,7 +2833,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev)
                        if (phy->radio_ver != 0x2050)
                                return;
                        if (!
-                           (dev->dev->bus->sprom.r1.
+                           (dev->dev->bus->sprom.
                             boardflags_lo & B43_BFL_RSSI))
                                return;
 
@@ -2865,7 +2864,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev)
                }
        case B43_PHYTYPE_G:
                if (!phy->gmode ||
-                   !(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+                   !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
                        tmp16 = b43_nrssi_hw_read(dev, 0x20);
                        if (tmp16 >= 0x20)
                                tmp16 -= 0x40;
@@ -3387,7 +3386,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
                }
 
                if ((phy->rev < 7) ||
-                   !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                   !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                        if (phy_register == B43_PHY_RFOVER) {
                                return 0x1B3;
                        } else if (phy_register == B43_PHY_RFOVERVAL) {
@@ -3427,7 +3426,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
                }
        } else {
                if ((phy->rev < 7) ||
-                   !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                   !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                        if (phy_register == B43_PHY_RFOVER) {
                                return 0x1B3;
                        } else if (phy_register == B43_PHY_RFOVERVAL) {
@@ -3906,7 +3905,7 @@ int b43_radio_selectchannel(struct b43_wldev *dev,
                b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
 
                if (channel == 14) {
-                       if (dev->dev->bus->sprom.r1.country_code ==
+                       if (dev->dev->bus->sprom.country_code ==
                            SSB_SPROM1CCODE_JAPAN)
                                b43_hf_write(dev,
                                             b43_hf_read(dev) & ~B43_HF_ACPR);
index b70992a..b3df1ba 100644 (file)
@@ -527,7 +527,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                } else {
                        b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002);
                        b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001);
-                       if ((bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
+                       if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
                            (phy->rev >= 7)) {
                                b43_phy_write(dev, B43_PHY_EXTG(0x11),
                                        b43_phy_read(dev, B43_PHY_EXTG(0x11)) & 0xF7FF);
@@ -540,7 +540,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                        }
                }
        }
-       if (bus->sprom.r1.boardflags_lo & B43_BFL_FEM) {
+       if (bus->sprom.boardflags_lo & B43_BFL_FEM) {
                b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120);
                b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480);
        }
index d36603d..557abe1 100644 (file)
@@ -385,7 +385,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
                        else
                                tmp -= 3;
                } else {
-                       if (dev->dev->bus->sprom.r1.
+                       if (dev->dev->bus->sprom.
                            boardflags_lo & B43_BFL_RSSI) {
                                if (in_rssi > 63)
                                        in_rssi = 63;