viafb: make module parameters visible in sysfs
Harald Welte [Tue, 22 Sep 2009 23:47:32 +0000 (16:47 -0700)]
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/via/viafbdev.c

index 8e43759..94ade1f 100644 (file)
@@ -21,6 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/seq_file.h>
+#include <linux/stat.h>
 #define _MASTER_FILE
 
 #include "global.h"
@@ -2191,79 +2192,79 @@ module_init(viafb_init);
 module_exit(viafb_exit);
 
 #ifdef MODULE
-module_param(viafb_memsize, int, 0);
+module_param(viafb_memsize, int, S_IRUSR);
 
-module_param(viafb_mode, charp, 0);
+module_param(viafb_mode, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
 
-module_param(viafb_mode1, charp, 0);
+module_param(viafb_mode1, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode1, "Set resolution (default=640x480)");
 
-module_param(viafb_bpp, int, 0);
+module_param(viafb_bpp, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bpp, "Set color depth (default=32bpp)");
 
-module_param(viafb_bpp1, int, 0);
+module_param(viafb_bpp1, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bpp1, "Set color depth (default=32bpp)");
 
-module_param(viafb_refresh, int, 0);
+module_param(viafb_refresh, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_refresh,
        "Set CRT viafb_refresh rate (default = 60)");
 
-module_param(viafb_refresh1, int, 0);
+module_param(viafb_refresh1, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_refresh1,
        "Set CRT refresh rate (default = 60)");
 
-module_param(viafb_lcd_panel_id, int, 0);
+module_param(viafb_lcd_panel_id, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_panel_id,
        "Set Flat Panel type(Default=1024x768)");
 
-module_param(viafb_lcd_dsp_method, int, 0);
+module_param(viafb_lcd_dsp_method, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_dsp_method,
        "Set Flat Panel display scaling method.(Default=Expandsion)");
 
-module_param(viafb_SAMM_ON, int, 0);
+module_param(viafb_SAMM_ON, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_SAMM_ON,
        "Turn on/off flag of SAMM(Default=OFF)");
 
-module_param(viafb_accel, int, 0);
+module_param(viafb_accel, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_accel,
        "Set 2D Hardware Acceleration: 0 = OFF, 1 = ON (default)");
 
-module_param(viafb_active_dev, charp, 0);
+module_param(viafb_active_dev, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_active_dev, "Specify active devices.");
 
-module_param(viafb_display_hardware_layout, int, 0);
+module_param(viafb_display_hardware_layout, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_display_hardware_layout,
        "Display Hardware Layout (LCD Only, DVI Only...,etc)");
 
-module_param(viafb_second_size, int, 0);
+module_param(viafb_second_size, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_second_size,
        "Set secondary device memory size");
 
-module_param(viafb_dual_fb, int, 0);
+module_param(viafb_dual_fb, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_dual_fb,
        "Turn on/off flag of dual framebuffer devices.(Default = OFF)");
 
-module_param(viafb_platform_epia_dvi, int, 0);
+module_param(viafb_platform_epia_dvi, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_platform_epia_dvi,
        "Turn on/off flag of DVI devices on EPIA board.(Default = OFF)");
 
-module_param(viafb_device_lcd_dualedge, int, 0);
+module_param(viafb_device_lcd_dualedge, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_device_lcd_dualedge,
        "Turn on/off flag of dual edge panel.(Default = OFF)");
 
-module_param(viafb_bus_width, int, 0);
+module_param(viafb_bus_width, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bus_width,
        "Set bus width of panel.(Default = 12)");
 
-module_param(viafb_lcd_mode, int, 0);
+module_param(viafb_lcd_mode, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_mode,
        "Set Flat Panel mode(Default=OPENLDI)");
 
-module_param(viafb_lcd_port, charp, 0);
+module_param(viafb_lcd_port, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_port, "Specify LCD output port.");
 
-module_param(viafb_dvi_port, charp, 0);
+module_param(viafb_dvi_port, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_dvi_port, "Specify DVI output port.");
 
 MODULE_LICENSE("GPL");