[netdrvr] atlx: code movement: move atl1 parameter parsing
Chris Snook [Sat, 19 Apr 2008 01:51:53 +0000 (21:51 -0400)]
Move some code from atlx.c to atl1.c to prevent build conflict with
the upcoming atl2 code.  No changes, just movement.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/net/atlx/atl1.c
drivers/net/atlx/atlx.c

index 5586fc6..0afe522 100644 (file)
 #include "atlx.c"
 
 /*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/*
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ */
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer;
+module_param_array_named(int_mod_timer, int_mod_timer, int,
+       &num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+#define DEFAULT_INT_MOD_CNT    100     /* 200us */
+#define MAX_INT_MOD_CNT                65000
+#define MIN_INT_MOD_CNT                50
+
+struct atl1_option {
+       enum { enable_option, range_option, list_option } type;
+       char *name;
+       char *err;
+       int def;
+       union {
+               struct {        /* range_option info */
+                       int min;
+                       int max;
+               } r;
+               struct {        /* list_option info */
+                       int nr;
+                       struct atl1_opt_list {
+                               int i;
+                               char *str;
+                       } *p;
+               } l;
+       } arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
+       struct pci_dev *pdev)
+{
+       if (*value == OPTION_UNSET) {
+               *value = opt->def;
+               return 0;
+       }
+
+       switch (opt->type) {
+       case enable_option:
+               switch (*value) {
+               case OPTION_ENABLED:
+                       dev_info(&pdev->dev, "%s enabled\n", opt->name);
+                       return 0;
+               case OPTION_DISABLED:
+                       dev_info(&pdev->dev, "%s disabled\n", opt->name);
+                       return 0;
+               }
+               break;
+       case range_option:
+               if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+                       dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+                               *value);
+                       return 0;
+               }
+               break;
+       case list_option:{
+                       int i;
+                       struct atl1_opt_list *ent;
+
+                       for (i = 0; i < opt->arg.l.nr; i++) {
+                               ent = &opt->arg.l.p[i];
+                               if (*value == ent->i) {
+                                       if (ent->str[0] != '\0')
+                                               dev_info(&pdev->dev, "%s\n",
+                                                       ent->str);
+                                       return 0;
+                               }
+                       }
+               }
+               break;
+
+       default:
+               break;
+       }
+
+       dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+               opt->name, *value, opt->err);
+       *value = opt->def;
+       return -1;
+}
+
+/*
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+       struct pci_dev *pdev = adapter->pdev;
+       int bd = adapter->bd_number;
+       if (bd >= ATL1_MAX_NIC) {
+               dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+               dev_notice(&pdev->dev, "using defaults for all values\n");
+       }
+       {                       /* Interrupt Moderate Timer */
+               struct atl1_option opt = {
+                       .type = range_option,
+                       .name = "Interrupt Moderator Timer",
+                       .err = "using default of "
+                               __MODULE_STRING(DEFAULT_INT_MOD_CNT),
+                       .def = DEFAULT_INT_MOD_CNT,
+                       .arg = {.r = {.min = MIN_INT_MOD_CNT,
+                                       .max = MAX_INT_MOD_CNT} }
+               };
+               int val;
+               if (num_int_mod_timer > bd) {
+                       val = int_mod_timer[bd];
+                       atl1_validate_option(&val, &opt, pdev);
+                       adapter->imt = (u16) val;
+               } else
+                       adapter->imt = (u16) (opt.def);
+       }
+}
+
+/*
  * atl1_pci_tbl - PCI Device ID Table
  */
 static const struct pci_device_id atl1_pci_tbl[] = {
index b7bf70e..f06b854 100644 (file)
@@ -253,142 +253,4 @@ static void atlx_restore_vlan(struct atlx_adapter *adapter)
        atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
 }
 
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-#define ATL1_MAX_NIC 4
-
-#define OPTION_UNSET    -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED  1
-
-#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
-
-/*
- * Interrupt Moderate Timer in units of 2 us
- *
- * Valid Range: 10-65535
- *
- * Default Value: 100 (200us)
- */
-static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_int_mod_timer;
-module_param_array_named(int_mod_timer, int_mod_timer, int,
-       &num_int_mod_timer, 0);
-MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
-
-#define DEFAULT_INT_MOD_CNT    100     /* 200us */
-#define MAX_INT_MOD_CNT                65000
-#define MIN_INT_MOD_CNT                50
-
-struct atl1_option {
-       enum { enable_option, range_option, list_option } type;
-       char *name;
-       char *err;
-       int def;
-       union {
-               struct {        /* range_option info */
-                       int min;
-                       int max;
-               } r;
-               struct {        /* list_option info */
-                       int nr;
-                       struct atl1_opt_list {
-                               int i;
-                               char *str;
-                       } *p;
-               } l;
-       } arg;
-};
-
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
-       struct pci_dev *pdev)
-{
-       if (*value == OPTION_UNSET) {
-               *value = opt->def;
-               return 0;
-       }
-
-       switch (opt->type) {
-       case enable_option:
-               switch (*value) {
-               case OPTION_ENABLED:
-                       dev_info(&pdev->dev, "%s enabled\n", opt->name);
-                       return 0;
-               case OPTION_DISABLED:
-                       dev_info(&pdev->dev, "%s disabled\n", opt->name);
-                       return 0;
-               }
-               break;
-       case range_option:
-               if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-                       dev_info(&pdev->dev, "%s set to %i\n", opt->name,
-                               *value);
-                       return 0;
-               }
-               break;
-       case list_option:{
-                       int i;
-                       struct atl1_opt_list *ent;
-
-                       for (i = 0; i < opt->arg.l.nr; i++) {
-                               ent = &opt->arg.l.p[i];
-                               if (*value == ent->i) {
-                                       if (ent->str[0] != '\0')
-                                               dev_info(&pdev->dev, "%s\n",
-                                                       ent->str);
-                                       return 0;
-                               }
-                       }
-               }
-               break;
-
-       default:
-               break;
-       }
-
-       dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
-               opt->name, *value, opt->err);
-       *value = opt->def;
-       return -1;
-}
-
-/*
- * atl1_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input.  If an invalid value is given, or if no user specified
- * value exists, a default value is used.  The final value is stored
- * in a variable in the adapter structure.
- */
-void __devinit atl1_check_options(struct atl1_adapter *adapter)
-{
-       struct pci_dev *pdev = adapter->pdev;
-       int bd = adapter->bd_number;
-       if (bd >= ATL1_MAX_NIC) {
-               dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
-               dev_notice(&pdev->dev, "using defaults for all values\n");
-       }
-       {                       /* Interrupt Moderate Timer */
-               struct atl1_option opt = {
-                       .type = range_option,
-                       .name = "Interrupt Moderator Timer",
-                       .err = "using default of "
-                               __MODULE_STRING(DEFAULT_INT_MOD_CNT),
-                       .def = DEFAULT_INT_MOD_CNT,
-                       .arg = {.r = {.min = MIN_INT_MOD_CNT,
-                                       .max = MAX_INT_MOD_CNT} }
-               };
-               int val;
-               if (num_int_mod_timer > bd) {
-                       val = int_mod_timer[bd];
-                       atl1_validate_option(&val, &opt, pdev);
-                       adapter->imt = (u16) val;
-               } else
-                       adapter->imt = (u16) (opt.def);
-       }
-}
-
 #endif /* ATLX_C */