kbuild: full dependency check on asm-offsets.h
Sam Ravnborg [Fri, 9 Sep 2005 17:28:28 +0000 (19:28 +0200)]
Building asm-offsets.h has been moved to a seperate Kbuild file
located in the top-level directory. This allow us to share the
functionality across the architectures.

The old rules in architecture specific Makefiles will die
in subsequent patches.

Furhtermore the usual kbuild dependency tracking is now used
when deciding to rebuild asm-offsets.s. So we no longer risk
to fail a rebuild caused by asm-offsets.c dependencies being touched.

With this common rule-set we now force the same name across
all architectures. Following patches will fix the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Kbuild [new file with mode: 0644]
Makefile
arch/i386/Makefile
arch/i386/kernel/head.S
arch/i386/kernel/vsyscall-sigreturn.S
arch/i386/kernel/vsyscall.lds.S
arch/i386/power/swsusp.S
include/asm-i386/thread_info.h

diff --git a/Kbuild b/Kbuild
new file mode 100644 (file)
index 0000000..197ece8
--- /dev/null
+++ b/Kbuild
@@ -0,0 +1,41 @@
+#
+# Kbuild for top-level directory of the kernel
+# This file takes care of the following:
+# 1) Generate asm-offsets.h
+
+#####
+# 1) Generate asm-offsets.h 
+#
+
+offsets-file := include/asm-$(ARCH)/asm-offsets.h
+
+always  := $(offsets-file)
+targets := $(offsets-file)
+targets += arch/$(ARCH)/kernel/asm-offsets.s
+
+quiet_cmd_offsets = GEN     $@
+define cmd_offsets
+       cat $< | \
+       (set -e; \
+        echo "#ifndef __ASM_OFFSETS_H__"; \
+        echo "#define __ASM_OFFSETS_H__"; \
+        echo "/*"; \
+        echo " * DO NOT MODIFY."; \
+        echo " *"; \
+        echo " * This file was generated by $(srctree)/Kbuild"; \
+        echo " *"; \
+        echo " */"; \
+        echo ""; \
+        sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
+        echo ""; \
+        echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(ARCH)/kernel/asm-offsets.s: arch/$(ARCH)/kernel/asm-offsets.c FORCE
+       $(Q)mkdir -p $(dir $@)
+       $(call if_changed_dep,cc_s_c)
+
+$(srctree)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild
+       $(call cmd,offsets)
+
index 63e5c9f..2402430 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -776,14 +776,14 @@ $(vmlinux-dirs): prepare-all scripts
 # A multi level approach is used. prepare1 is updated first, then prepare0.
 # prepare-all is the collection point for the prepare targets.
 
-.PHONY: prepare-all prepare prepare0 prepare1 prepare2
+.PHONY: prepare-all prepare prepare0 prepare1 prepare2 prepare3
 
-# prepare2 is used to check if we are building in a separate output directory,
+# prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
 # 1) Check that make has not been executed in the kernel src $(srctree)
 # 2) Create the include2 directory, used for the second asm symlink
 
-prepare2:
+prepare3:
 ifneq ($(KBUILD_SRC),)
        @echo '  Using $(srctree) as source for kernel'
        $(Q)if [ -f $(srctree)/.config ]; then \
@@ -795,18 +795,21 @@ ifneq ($(KBUILD_SRC),)
        $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
 endif
 
-# prepare1 creates a makefile if using a separate output directory
-prepare1: prepare2 outputmakefile
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile
 
-prepare0: prepare1 include/linux/version.h include/asm \
+prepare1: prepare2 include/linux/version.h include/asm \
                    include/config/MARKER
 ifneq ($(KBUILD_MODULES),)
        $(Q)rm -rf $(MODVERDIR)
        $(Q)mkdir -p $(MODVERDIR)
 endif
 
+prepare0: prepare prepare1 FORCE
+       $(Q)$(MAKE) $(build)=$(srctree)
+
 # All the preparing..
-prepare-all: prepare0 prepare
+prepare-all: prepare0
 
 #      Leave this as default for preprocessing vmlinux.lds.S, which is now
 #      done in arch/$(ARCH)/kernel/Makefile
@@ -949,26 +952,6 @@ modules modules_install: FORCE
 
 endif # CONFIG_MODULES
 
-# Generate asm-offsets.h 
-# ---------------------------------------------------------------------------
-
-define filechk_gen-asm-offsets
-       (set -e; \
-        echo "#ifndef __ASM_OFFSETS_H__"; \
-        echo "#define __ASM_OFFSETS_H__"; \
-        echo "/*"; \
-        echo " * DO NOT MODIFY."; \
-        echo " *"; \
-        echo " * This file was generated by arch/$(ARCH)/Makefile"; \
-        echo " *"; \
-        echo " */"; \
-        echo ""; \
-        sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
-        echo ""; \
-        echo "#endif" )
-endef
-
-
 ###
 # Cleaning is done on three levels.
 # make clean     Delete most generated files
@@ -991,7 +974,7 @@ MRPROPER_FILES += .config .config.old include/asm .version \
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
 
 .PHONY: $(clean-dirs) clean archclean
 $(clean-dirs):
index bf7c9ba..0995199 100644 (file)
@@ -156,15 +156,6 @@ install: vmlinux
 install kernel_install:
        $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
-prepare: include/asm-$(ARCH)/asm_offsets.h
-CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
-
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
-                                  include/config/MARKER
-
-include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
-       $(call filechk,gen-asm-offsets)
-
 archclean:
        $(Q)$(MAKE) $(clean)=arch/i386/boot
 
index 0480ca9..e437fb3 100644 (file)
@@ -17,7 +17,7 @@
 #include <asm/desc.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
 #include <asm/setup.h>
 
 /*
index 68afa50..fadb5bc 100644 (file)
@@ -7,7 +7,7 @@
  */
 
 #include <asm/unistd.h>
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
 
 
 /* XXX
index a797770..98699ca 100644 (file)
@@ -3,7 +3,7 @@
  * object prelinked to its virtual address, and with only one read-only
  * segment (that fits in one page).  This script controls its layout.
  */
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
 
 SECTIONS
 {
index c410528..c893b89 100644 (file)
@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page.h>
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
 
        .text
 
index e2cb9fa..8fbf791 100644 (file)
@@ -48,7 +48,7 @@ struct thread_info {
 
 #else /* !__ASSEMBLY__ */
 
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
 
 #endif