mfd: Add db8500-pcmu watchdog accessor functions for watchdog
Jonas Aberg [Fri, 12 Aug 2011 08:28:33 +0000 (10:28 +0200)]
This implements the watchdog accessor functions for the DB8500
PRCMU, making it possible to implement the watchdog driver.

Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/db8500-prcmu.c

index 28a6090..95498f8 100644 (file)
@@ -1543,6 +1543,78 @@ int prcmu_stop_temp_sense(void)
        return config_hot_period(0xFFFF);
 }
 
+static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
+{
+
+       mutex_lock(&mb4_transfer.lock);
+
+       while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+               cpu_relax();
+
+       writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
+       writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
+       writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
+       writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
+
+       writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+       writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
+       wait_for_completion(&mb4_transfer.work);
+
+       mutex_unlock(&mb4_transfer.lock);
+
+       return 0;
+
+}
+
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+       BUG_ON(num == 0 || num > 0xf);
+       return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
+                           sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
+                           A9WDOG_AUTO_OFF_DIS);
+}
+
+int prcmu_enable_a9wdog(u8 id)
+{
+       return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
+}
+
+int prcmu_disable_a9wdog(u8 id)
+{
+       return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
+}
+
+int prcmu_kick_a9wdog(u8 id)
+{
+       return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
+}
+
+/*
+ * timeout is 28 bit, in ms.
+ */
+#define MAX_WATCHDOG_TIMEOUT 131000
+int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+       if (timeout > MAX_WATCHDOG_TIMEOUT)
+               /*
+                * Due to calculation bug in prcmu fw, timeouts
+                * can't be bigger than 131 seconds.
+                */
+               return -EINVAL;
+
+       return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
+                           (id & A9WDOG_ID_MASK) |
+                           /*
+                            * Put the lowest 28 bits of timeout at
+                            * offset 4. Four first bits are used for id.
+                            */
+                           (u8)((timeout << 4) & 0xf0),
+                           (u8)((timeout >> 4) & 0xff),
+                           (u8)((timeout >> 12) & 0xff),
+                           (u8)((timeout >> 20) & 0xff));
+}
+
 /**
  * prcmu_set_clock_divider() - Configure the clock divider.
  * @clock:     The clock for which the request is made.