[APM] Add shared version of APM emulation
Ralf Baechle [Fri, 9 Feb 2007 17:08:57 +0000 (17:08 +0000)]
Currently ARM and MIPS both have nearly identical copies of the APM
emulation code in their arch code.  Add yet another copy of it to
drivers char and make it selectable through SYS_SUPPORTS_APM_EMULATION.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

drivers/char/Makefile
drivers/char/apm-emulation.c [new file with mode: 0644]
include/linux/apm-emulation.h [new file with mode: 0644]
kernel/power/Kconfig

index 0326ca1..ae8567c 100644 (file)
@@ -60,6 +60,8 @@ obj-$(CONFIG_BRIQ_PANEL)      += briq_panel.o
 obj-$(CONFIG_PRINTER)          += lp.o
 obj-$(CONFIG_TIPAR)            += tipar.o
 
+obj-$(CONFIG_APM_EMULATION)    += apm-emulation.o
+
 obj-$(CONFIG_DTLK)             += dtlk.o
 obj-$(CONFIG_R3964)            += n_r3964.o
 obj-$(CONFIG_APPLICOM)         += applicom.o
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
new file mode 100644 (file)
index 0000000..179c7a3
--- /dev/null
@@ -0,0 +1,672 @@
+/*
+ * bios-less APM driver for ARM Linux
+ *  Jamey Hicks <jamey@crl.dec.com>
+ *  adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
+ *
+ * APM 1.2 Reference:
+ *   Intel Corporation, Microsoft Corporation. Advanced Power Management
+ *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/apm-emulation.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV  134
+
+/*
+ * See Documentation/Config.help for the configuration options.
+ *
+ * Various options can be changed at boot time as follows:
+ * (We allow underscores for compatibility with the modules code)
+ *     apm=on/off                      enable/disable APM
+ */
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS         16
+
+struct apm_queue {
+       unsigned int            event_head;
+       unsigned int            event_tail;
+       apm_event_t             events[APM_MAX_EVENTS];
+};
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+       struct list_head        list;
+
+       unsigned int            suser: 1;
+       unsigned int            writer: 1;
+       unsigned int            reader: 1;
+
+       int                     suspend_result;
+       unsigned int            suspend_state;
+#define SUSPEND_NONE   0               /* no suspend pending */
+#define SUSPEND_PENDING        1               /* suspend pending read */
+#define SUSPEND_READ   2               /* suspend read, pending ack */
+#define SUSPEND_ACKED  3               /* suspend acked */
+#define SUSPEND_WAIT   4               /* waiting for suspend */
+#define SUSPEND_DONE   5               /* suspend completed */
+
+       struct apm_queue        queue;
+};
+
+/*
+ * Local variables
+ */
+static int suspends_pending;
+static int apm_disabled;
+static struct task_struct *kapmd_tsk;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+
+/*
+ * This is a list of everyone who has opened /dev/apm_bios
+ */
+static DECLARE_RWSEM(user_list_lock);
+static LIST_HEAD(apm_user_list);
+
+/*
+ * kapmd info.  kapmd provides us a process context to handle
+ * "APM" events within - specifically necessary if we're going
+ * to be suspending the system.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
+static DEFINE_SPINLOCK(kapmd_queue_lock);
+static struct apm_queue kapmd_queue;
+
+static DEFINE_MUTEX(state_lock);
+
+static const char driver_version[] = "1.13";   /* no spaces */
+
+
+
+/*
+ * Compatibility cruft until the IPAQ people move over to the new
+ * interface.
+ */
+static void __apm_get_power_status(struct apm_power_info *info)
+{
+}
+
+/*
+ * This allows machines to provide their own "apm get power status" function.
+ */
+void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
+EXPORT_SYMBOL(apm_get_power_status);
+
+
+/*
+ * APM event queue management.
+ */
+static inline int queue_empty(struct apm_queue *q)
+{
+       return q->event_head == q->event_tail;
+}
+
+static inline apm_event_t queue_get_event(struct apm_queue *q)
+{
+       q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+       return q->events[q->event_tail];
+}
+
+static void queue_add_event(struct apm_queue *q, apm_event_t event)
+{
+       q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
+       if (q->event_head == q->event_tail) {
+               static int notified;
+
+               if (notified++ == 0)
+                   printk(KERN_ERR "apm: an event queue overflowed\n");
+               q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+       }
+       q->events[q->event_head] = event;
+}
+
+static void queue_event(apm_event_t event)
+{
+       struct apm_user *as;
+
+       down_read(&user_list_lock);
+       list_for_each_entry(as, &apm_user_list, list) {
+               if (as->reader)
+                       queue_add_event(&as->queue, event);
+       }
+       up_read(&user_list_lock);
+       wake_up_interruptible(&apm_waitqueue);
+}
+
+/*
+ * queue_suspend_event - queue an APM suspend event.
+ *
+ * Check that we're in a state where we can suspend.  If not,
+ * return -EBUSY.  Otherwise, queue an event to all "writer"
+ * users.  If there are no "writer" users, return '1' to
+ * indicate that we can immediately suspend.
+ */
+static int queue_suspend_event(apm_event_t event, struct apm_user *sender)
+{
+       struct apm_user *as;
+       int ret = 1;
+
+       mutex_lock(&state_lock);
+       down_read(&user_list_lock);
+
+       /*
+        * If a thread is still processing, we can't suspend, so reject
+        * the request.
+        */
+       list_for_each_entry(as, &apm_user_list, list) {
+               if (as != sender && as->reader && as->writer && as->suser &&
+                   as->suspend_state != SUSPEND_NONE) {
+                       ret = -EBUSY;
+                       goto out;
+               }
+       }
+
+       list_for_each_entry(as, &apm_user_list, list) {
+               if (as != sender && as->reader && as->writer && as->suser) {
+                       as->suspend_state = SUSPEND_PENDING;
+                       suspends_pending++;
+                       queue_add_event(&as->queue, event);
+                       ret = 0;
+               }
+       }
+ out:
+       up_read(&user_list_lock);
+       mutex_unlock(&state_lock);
+       wake_up_interruptible(&apm_waitqueue);
+       return ret;
+}
+
+static void apm_suspend(void)
+{
+       struct apm_user *as;
+       int err = pm_suspend(PM_SUSPEND_MEM);
+
+       /*
+        * Anyone on the APM queues will think we're still suspended.
+        * Send a message so everyone knows we're now awake again.
+        */
+       queue_event(APM_NORMAL_RESUME);
+
+       /*
+        * Finally, wake up anyone who is sleeping on the suspend.
+        */
+       mutex_lock(&state_lock);
+       down_read(&user_list_lock);
+       list_for_each_entry(as, &apm_user_list, list) {
+               if (as->suspend_state == SUSPEND_WAIT ||
+                   as->suspend_state == SUSPEND_ACKED) {
+                       as->suspend_result = err;
+                       as->suspend_state = SUSPEND_DONE;
+               }
+       }
+       up_read(&user_list_lock);
+       mutex_unlock(&state_lock);
+
+       wake_up(&apm_suspend_waitqueue);
+}
+
+static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
+{
+       struct apm_user *as = fp->private_data;
+       apm_event_t event;
+       int i = count, ret = 0;
+
+       if (count < sizeof(apm_event_t))
+               return -EINVAL;
+
+       if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
+               return -EAGAIN;
+
+       wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
+
+       while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
+               event = queue_get_event(&as->queue);
+
+               ret = -EFAULT;
+               if (copy_to_user(buf, &event, sizeof(event)))
+                       break;
+
+               mutex_lock(&state_lock);
+               if (as->suspend_state == SUSPEND_PENDING &&
+                   (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND))
+                       as->suspend_state = SUSPEND_READ;
+               mutex_unlock(&state_lock);
+
+               buf += sizeof(event);
+               i -= sizeof(event);
+       }
+
+       if (i < count)
+               ret = count - i;
+
+       return ret;
+}
+
+static unsigned int apm_poll(struct file *fp, poll_table * wait)
+{
+       struct apm_user *as = fp->private_data;
+
+       poll_wait(fp, &apm_waitqueue, wait);
+       return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
+}
+
+/*
+ * apm_ioctl - handle APM ioctl
+ *
+ * APM_IOC_SUSPEND
+ *   This IOCTL is overloaded, and performs two functions.  It is used to:
+ *     - initiate a suspend
+ *     - acknowledge a suspend read from /dev/apm_bios.
+ *   Only when everyone who has opened /dev/apm_bios with write permission
+ *   has acknowledge does the actual suspend happen.
+ */
+static int
+apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
+{
+       struct apm_user *as = filp->private_data;
+       unsigned long flags;
+       int err = -EINVAL;
+
+       if (!as->suser || !as->writer)
+               return -EPERM;
+
+       switch (cmd) {
+       case APM_IOC_SUSPEND:
+               mutex_lock(&state_lock);
+
+               as->suspend_result = -EINTR;
+
+               if (as->suspend_state == SUSPEND_READ) {
+                       int pending;
+
+                       /*
+                        * If we read a suspend command from /dev/apm_bios,
+                        * then the corresponding APM_IOC_SUSPEND ioctl is
+                        * interpreted as an acknowledge.
+                        */
+                       as->suspend_state = SUSPEND_ACKED;
+                       suspends_pending--;
+                       pending = suspends_pending == 0;
+                       mutex_unlock(&state_lock);
+
+                       /*
+                        * If there are no further acknowledges required,
+                        * suspend the system.
+                        */
+                       if (pending)
+                               apm_suspend();
+
+                       /*
+                        * Wait for the suspend/resume to complete.  If there
+                        * are pending acknowledges, we wait here for them.
+                        *
+                        * Note: we need to ensure that the PM subsystem does
+                        * not kick us out of the wait when it suspends the
+                        * threads.
+                        */
+                       flags = current->flags;
+                       current->flags |= PF_NOFREEZE;
+
+                       wait_event(apm_suspend_waitqueue,
+                                  as->suspend_state == SUSPEND_DONE);
+               } else {
+                       as->suspend_state = SUSPEND_WAIT;
+                       mutex_unlock(&state_lock);
+
+                       /*
+                        * Otherwise it is a request to suspend the system.
+                        * Queue an event for all readers, and expect an
+                        * acknowledge from all writers who haven't already
+                        * acknowledged.
+                        */
+                       err = queue_suspend_event(APM_USER_SUSPEND, as);
+                       if (err < 0) {
+                               /*
+                                * Avoid taking the lock here - this
+                                * should be fine.
+                                */
+                               as->suspend_state = SUSPEND_NONE;
+                               break;
+                       }
+
+                       if (err > 0)
+                               apm_suspend();
+
+                       /*
+                        * Wait for the suspend/resume to complete.  If there
+                        * are pending acknowledges, we wait here for them.
+                        *
+                        * Note: we need to ensure that the PM subsystem does
+                        * not kick us out of the wait when it suspends the
+                        * threads.
+                        */
+                       flags = current->flags;
+                       current->flags |= PF_NOFREEZE;
+
+                       wait_event_interruptible(apm_suspend_waitqueue,
+                                        as->suspend_state == SUSPEND_DONE);
+               }
+
+               current->flags = flags;
+
+               mutex_lock(&state_lock);
+               err = as->suspend_result;
+               as->suspend_state = SUSPEND_NONE;
+               mutex_unlock(&state_lock);
+               break;
+       }
+
+       return err;
+}
+
+static int apm_release(struct inode * inode, struct file * filp)
+{
+       struct apm_user *as = filp->private_data;
+       int pending = 0;
+
+       filp->private_data = NULL;
+
+       down_write(&user_list_lock);
+       list_del(&as->list);
+       up_write(&user_list_lock);
+
+       /*
+        * We are now unhooked from the chain.  As far as new
+        * events are concerned, we no longer exist.  However, we
+        * need to balance suspends_pending, which means the
+        * possibility of sleeping.
+        */
+       mutex_lock(&state_lock);
+       if (as->suspend_state != SUSPEND_NONE) {
+               suspends_pending -= 1;
+               pending = suspends_pending == 0;
+       }
+       mutex_unlock(&state_lock);
+       if (pending)
+               apm_suspend();
+
+       kfree(as);
+       return 0;
+}
+
+static int apm_open(struct inode * inode, struct file * filp)
+{
+       struct apm_user *as;
+
+       as = kzalloc(sizeof(*as), GFP_KERNEL);
+       if (as) {
+               /*
+                * XXX - this is a tiny bit broken, when we consider BSD
+                * process accounting. If the device is opened by root, we
+                * instantly flag that we used superuser privs. Who knows,
+                * we might close the device immediately without doing a
+                * privileged operation -- cevans
+                */
+               as->suser = capable(CAP_SYS_ADMIN);
+               as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+               as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+
+               down_write(&user_list_lock);
+               list_add(&as->list, &apm_user_list);
+               up_write(&user_list_lock);
+
+               filp->private_data = as;
+       }
+
+       return as ? 0 : -ENOMEM;
+}
+
+static struct file_operations apm_bios_fops = {
+       .owner          = THIS_MODULE,
+       .read           = apm_read,
+       .poll           = apm_poll,
+       .ioctl          = apm_ioctl,
+       .open           = apm_open,
+       .release        = apm_release,
+};
+
+static struct miscdevice apm_device = {
+       .minor          = APM_MINOR_DEV,
+       .name           = "apm_bios",
+       .fops           = &apm_bios_fops
+};
+
+
+#ifdef CONFIG_PROC_FS
+/*
+ * Arguments, with symbols from linux/apm_bios.h.
+ *
+ *   0) Linux driver version (this will change if format changes)
+ *   1) APM BIOS Version.  Usually 1.0, 1.1 or 1.2.
+ *   2) APM flags from APM Installation Check (0x00):
+ *     bit 0: APM_16_BIT_SUPPORT
+ *     bit 1: APM_32_BIT_SUPPORT
+ *     bit 2: APM_IDLE_SLOWS_CLOCK
+ *     bit 3: APM_BIOS_DISABLED
+ *     bit 4: APM_BIOS_DISENGAGED
+ *   3) AC line status
+ *     0x00: Off-line
+ *     0x01: On-line
+ *     0x02: On backup power (BIOS >= 1.1 only)
+ *     0xff: Unknown
+ *   4) Battery status
+ *     0x00: High
+ *     0x01: Low
+ *     0x02: Critical
+ *     0x03: Charging
+ *     0x04: Selected battery not present (BIOS >= 1.2 only)
+ *     0xff: Unknown
+ *   5) Battery flag
+ *     bit 0: High
+ *     bit 1: Low
+ *     bit 2: Critical
+ *     bit 3: Charging
+ *     bit 7: No system battery
+ *     0xff: Unknown
+ *   6) Remaining battery life (percentage of charge):
+ *     0-100: valid
+ *     -1: Unknown
+ *   7) Remaining battery life (time units):
+ *     Number of remaining minutes or seconds
+ *     -1: Unknown
+ *   8) min = minutes; sec = seconds
+ */
+static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+       struct apm_power_info info;
+       char *units;
+       int ret;
+
+       info.ac_line_status = 0xff;
+       info.battery_status = 0xff;
+       info.battery_flag   = 0xff;
+       info.battery_life   = -1;
+       info.time           = -1;
+       info.units          = -1;
+
+       if (apm_get_power_status)
+               apm_get_power_status(&info);
+
+       switch (info.units) {
+       default:        units = "?";    break;
+       case 0:         units = "min";  break;
+       case 1:         units = "sec";  break;
+       }
+
+       ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+                    driver_version, APM_32_BIT_SUPPORT,
+                    info.ac_line_status, info.battery_status,
+                    info.battery_flag, info.battery_life,
+                    info.time, units);
+
+       return ret;
+}
+#endif
+
+static int kapmd(void *arg)
+{
+       do {
+               apm_event_t event;
+               int ret;
+
+               wait_event_interruptible(kapmd_wait,
+                               !queue_empty(&kapmd_queue) || kthread_should_stop());
+
+               if (kthread_should_stop())
+                       break;
+
+               spin_lock_irq(&kapmd_queue_lock);
+               event = 0;
+               if (!queue_empty(&kapmd_queue))
+                       event = queue_get_event(&kapmd_queue);
+               spin_unlock_irq(&kapmd_queue_lock);
+
+               switch (event) {
+               case 0:
+                       break;
+
+               case APM_LOW_BATTERY:
+               case APM_POWER_STATUS_CHANGE:
+                       queue_event(event);
+                       break;
+
+               case APM_USER_SUSPEND:
+               case APM_SYS_SUSPEND:
+                       ret = queue_suspend_event(event, NULL);
+                       if (ret < 0) {
+                               /*
+                                * We were busy.  Try again in 50ms.
+                                */
+                               queue_add_event(&kapmd_queue, event);
+                               msleep(50);
+                       }
+                       if (ret > 0)
+                               apm_suspend();
+                       break;
+
+               case APM_CRITICAL_SUSPEND:
+                       apm_suspend();
+                       break;
+               }
+       } while (1);
+
+       return 0;
+}
+
+static int __init apm_init(void)
+{
+       int ret;
+
+       if (apm_disabled) {
+               printk(KERN_NOTICE "apm: disabled on user request.\n");
+               return -ENODEV;
+       }
+
+       kapmd_tsk = kthread_create(kapmd, NULL, "kapmd");
+       if (IS_ERR(kapmd_tsk)) {
+               ret = PTR_ERR(kapmd_tsk);
+               kapmd_tsk = NULL;
+               return ret;
+       }
+       kapmd_tsk->flags |= PF_NOFREEZE;
+       wake_up_process(kapmd_tsk);
+
+#ifdef CONFIG_PROC_FS
+       create_proc_info_entry("apm", 0, NULL, apm_get_info);
+#endif
+
+       ret = misc_register(&apm_device);
+       if (ret != 0) {
+               remove_proc_entry("apm", NULL);
+               kthread_stop(kapmd_tsk);
+       }
+
+       return ret;
+}
+
+static void __exit apm_exit(void)
+{
+       misc_deregister(&apm_device);
+       remove_proc_entry("apm", NULL);
+
+       kthread_stop(kapmd_tsk);
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
+
+#ifndef MODULE
+static int __init apm_setup(char *str)
+{
+       while ((str != NULL) && (*str != '\0')) {
+               if (strncmp(str, "off", 3) == 0)
+                       apm_disabled = 1;
+               if (strncmp(str, "on", 2) == 0)
+                       apm_disabled = 0;
+               str = strchr(str, ',');
+               if (str != NULL)
+                       str += strspn(str, ", \t");
+       }
+       return 1;
+}
+
+__setup("apm=", apm_setup);
+#endif
+
+/**
+ * apm_queue_event - queue an APM event for kapmd
+ * @event: APM event
+ *
+ * Queue an APM event for kapmd to process and ultimately take the
+ * appropriate action.  Only a subset of events are handled:
+ *   %APM_LOW_BATTERY
+ *   %APM_POWER_STATUS_CHANGE
+ *   %APM_USER_SUSPEND
+ *   %APM_SYS_SUSPEND
+ *   %APM_CRITICAL_SUSPEND
+ */
+void apm_queue_event(apm_event_t event)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&kapmd_queue_lock, flags);
+       queue_add_event(&kapmd_queue, event);
+       spin_unlock_irqrestore(&kapmd_queue_lock, flags);
+
+       wake_up_interruptible(&kapmd_wait);
+}
+EXPORT_SYMBOL(apm_queue_event);
diff --git a/include/linux/apm-emulation.h b/include/linux/apm-emulation.h
new file mode 100644 (file)
index 0000000..e6d8003
--- /dev/null
@@ -0,0 +1,62 @@
+/* -*- linux-c -*-
+ *
+ * (C) 2003 zecke@handhelds.org
+ *
+ * GPL version 2
+ *
+ * based on arch/arm/kernel/apm.c
+ * factor out the information needed by architectures to provide
+ * apm status
+ */
+#ifndef __LINUX_APM_EMULATION_H
+#define __LINUX_APM_EMULATION_H
+
+#include <linux/apm_bios.h>
+
+/*
+ * This structure gets filled in by the machine specific 'get_power_status'
+ * implementation.  Any fields which are not set default to a safe value.
+ */
+struct apm_power_info {
+       unsigned char   ac_line_status;
+#define APM_AC_OFFLINE                 0
+#define APM_AC_ONLINE                  1
+#define APM_AC_BACKUP                  2
+#define APM_AC_UNKNOWN                 0xff
+
+       unsigned char   battery_status;
+#define APM_BATTERY_STATUS_HIGH                0
+#define APM_BATTERY_STATUS_LOW         1
+#define APM_BATTERY_STATUS_CRITICAL    2
+#define APM_BATTERY_STATUS_CHARGING    3
+#define APM_BATTERY_STATUS_NOT_PRESENT 4
+#define APM_BATTERY_STATUS_UNKNOWN     0xff
+
+       unsigned char   battery_flag;
+#define APM_BATTERY_FLAG_HIGH          (1 << 0)
+#define APM_BATTERY_FLAG_LOW           (1 << 1)
+#define APM_BATTERY_FLAG_CRITICAL      (1 << 2)
+#define APM_BATTERY_FLAG_CHARGING      (1 << 3)
+#define APM_BATTERY_FLAG_NOT_PRESENT   (1 << 7)
+#define APM_BATTERY_FLAG_UNKNOWN       0xff
+
+       int             battery_life;
+       int             time;
+       int             units;
+#define APM_UNITS_MINS                 0
+#define APM_UNITS_SECS                 1
+#define APM_UNITS_UNKNOWN              -1
+
+};
+
+/*
+ * This allows machines to provide their own "apm get power status" function.
+ */
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+/*
+ * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
+ */
+void apm_queue_event(apm_event_t event);
+
+#endif /* __LINUX_APM_EMULATION_H */
index ed29622..95f6657 100644 (file)
@@ -131,3 +131,29 @@ config SUSPEND_SMP
        bool
        depends on HOTPLUG_CPU && X86 && PM
        default y
+
+config APM_EMULATION
+       tristate "Advanced Power Management Emulation"
+       depends on PM && SYS_SUPPORTS_APM_EMULATION
+       help
+         APM is a BIOS specification for saving power using several different
+         techniques. This is mostly useful for battery powered laptops with
+         APM compliant BIOSes. If you say Y here, the system time will be
+         reset after a RESUME operation, the /proc/apm device will provide
+         battery status information, and user-space programs will receive
+         notification of APM "events" (e.g. battery status change).
+
+         In order to use APM, you will need supporting software. For location
+         and more information, read <file:Documentation/pm.txt> and the
+         Battery Powered Linux mini-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         This driver does not spin down disk drives (see the hdparm(8)
+         manpage ("man 8 hdparm") for that), and it doesn't turn off
+         VESA-compliant "green" monitors.
+
+         Generally, if you don't have a battery in your machine, there isn't
+         much point in using this driver and you should say N. If you get
+         random kernel OOPSes or reboots that don't seem to be related to
+         anything, try disabling/enabling this option (or disabling/enabling
+         APM in your BIOS).