[PATCH] pcmcia: remove unneeded Vcc pseudo setting
Dominik Brodowski [Sun, 15 Jan 2006 11:43:16 +0000 (12:43 +0100)]
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

46 files changed:
drivers/bluetooth/bluecard_cs.c
drivers/bluetooth/bt3c_cs.c
drivers/bluetooth/btuart_cs.c
drivers/bluetooth/dtl1_cs.c
drivers/char/pcmcia/cm4000_cs.c
drivers/char/pcmcia/cm4040_cs.c
drivers/char/pcmcia/synclink_cs.c
drivers/ide/legacy/ide-cs.c
drivers/isdn/hardware/avm/avm_cs.c
drivers/isdn/hisax/avma1_cs.c
drivers/isdn/hisax/elsa_cs.c
drivers/isdn/hisax/sedlbauer_cs.c
drivers/isdn/hisax/teles_cs.c
drivers/mtd/maps/pcmciamtd.c
drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c589_cs.c
drivers/net/pcmcia/axnet_cs.c
drivers/net/pcmcia/com20020_cs.c
drivers/net/pcmcia/fmvj18x_cs.c
drivers/net/pcmcia/ibmtr_cs.c
drivers/net/pcmcia/nmclan_cs.c
drivers/net/pcmcia/pcnet_cs.c
drivers/net/pcmcia/smc91c92_cs.c
drivers/net/pcmcia/xirc2ps_cs.c
drivers/net/wireless/airo_cs.c
drivers/net/wireless/atmel_cs.c
drivers/net/wireless/hostap/hostap_cs.c
drivers/net/wireless/netwave_cs.c
drivers/net/wireless/orinoco_cs.c
drivers/net/wireless/ray_cs.c
drivers/net/wireless/spectrum_cs.c
drivers/net/wireless/wavelan_cs.c
drivers/net/wireless/wl3501_cs.c
drivers/parport/parport_cs.c
drivers/pcmcia/pcmcia_resource.c
drivers/scsi/pcmcia/aha152x_stub.c
drivers/scsi/pcmcia/fdomain_stub.c
drivers/scsi/pcmcia/nsp_cs.c
drivers/scsi/pcmcia/qlogic_stub.c
drivers/scsi/pcmcia/sym53c500_cs.c
drivers/serial/serial_cs.c
drivers/telephony/ixj_pcmcia.c
drivers/usb/host/sl811_cs.c
include/pcmcia/cs.h
sound/pcmcia/pdaudiocf/pdaudiocf.c
sound/pcmcia/vx/vxpocket.c

index bb833b2..8e23f9a 100644 (file)
@@ -878,7 +878,6 @@ static int bluecard_attach(struct pcmcia_device *p_dev)
        link->irq.Instance = info;
 
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
@@ -925,7 +924,6 @@ static void bluecard_config(dev_link_t *link)
        tuple_t tuple;
        u_short buf[256];
        cisparse_t parse;
-       config_info_t config;
        int i, n, last_ret, last_fn;
 
        tuple.TupleData = (cisdata_t *)buf;
@@ -945,8 +943,6 @@ static void bluecard_config(dev_link_t *link)
 
        /* Configure card */
        link->state |= DEV_CONFIG;
-       i = pcmcia_get_configuration_info(handle, &config);
-       link->conf.Vcc = config.Vcc;
 
        link->conf.ConfigIndex = 0x20;
        link->io.NumPorts1 = 64;
index 7b0f4f0..0b84805 100644 (file)
@@ -670,7 +670,6 @@ static int bt3c_attach(struct pcmcia_device *p_dev)
        link->irq.Instance = info;
 
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
@@ -728,7 +727,6 @@ static void bt3c_config(dev_link_t *link)
        u_short buf[256];
        cisparse_t parse;
        cistpl_cftable_entry_t *cf = &parse.cftable_entry;
-       config_info_t config;
        int i, j, try, last_ret, last_fn;
 
        tuple.TupleData = (cisdata_t *)buf;
@@ -748,8 +746,6 @@ static void bt3c_config(dev_link_t *link)
 
        /* Configure card */
        link->state |= DEV_CONFIG;
-       i = pcmcia_get_configuration_info(handle, &config);
-       link->conf.Vcc = config.Vcc;
 
        /* First pass: look for a config entry that looks normal. */
        tuple.TupleData = (cisdata_t *)buf;
@@ -764,7 +760,7 @@ static void bt3c_config(dev_link_t *link)
                        if (i != CS_SUCCESS)
                                goto next_entry;
                        if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                               link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+                               link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                        if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
                                link->conf.ConfigIndex = cf->index;
                                link->io.BasePort1 = cf->io.win[0].base;
index 9a507bd..ec19a57 100644 (file)
@@ -598,7 +598,6 @@ static int btuart_attach(struct pcmcia_device *p_dev)
        link->irq.Instance = info;
 
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
@@ -656,7 +655,6 @@ static void btuart_config(dev_link_t *link)
        u_short buf[256];
        cisparse_t parse;
        cistpl_cftable_entry_t *cf = &parse.cftable_entry;
-       config_info_t config;
        int i, j, try, last_ret, last_fn;
 
        tuple.TupleData = (cisdata_t *)buf;
@@ -676,8 +674,6 @@ static void btuart_config(dev_link_t *link)
 
        /* Configure card */
        link->state |= DEV_CONFIG;
-       i = pcmcia_get_configuration_info(handle, &config);
-       link->conf.Vcc = config.Vcc;
 
        /* First pass: look for a config entry that looks normal. */
        tuple.TupleData = (cisdata_t *) buf;
@@ -692,7 +688,7 @@ static void btuart_config(dev_link_t *link)
                        if (i != CS_SUCCESS)
                                goto next_entry;
                        if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                               link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+                               link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                        if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
                                link->conf.ConfigIndex = cf->index;
                                link->io.BasePort1 = cf->io.win[0].base;
index 39dbe73..86617ee 100644 (file)
@@ -577,7 +577,6 @@ static int dtl1_attach(struct pcmcia_device *p_dev)
        link->irq.Instance = info;
 
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
@@ -634,7 +633,6 @@ static void dtl1_config(dev_link_t *link)
        u_short buf[256];
        cisparse_t parse;
        cistpl_cftable_entry_t *cf = &parse.cftable_entry;
-       config_info_t config;
        int i, last_ret, last_fn;
 
        tuple.TupleData = (cisdata_t *)buf;
@@ -654,8 +652,6 @@ static void dtl1_config(dev_link_t *link)
 
        /* Configure card */
        link->state |= DEV_CONFIG;
-       i = pcmcia_get_configuration_info(handle, &config);
-       link->conf.Vcc = config.Vcc;
 
        tuple.TupleData = (cisdata_t *)buf;
        tuple.TupleOffset = 0;
index 870decb..c996ae1 100644 (file)
@@ -1765,7 +1765,6 @@ static void cm4000_config(dev_link_t * link, int devno)
        struct cm4000_dev *dev;
        tuple_t tuple;
        cisparse_t parse;
-       config_info_t conf;
        u_char buf[64];
        int fail_fn, fail_rc;
        int rc;
@@ -1790,16 +1789,10 @@ static void cm4000_config(dev_link_t * link, int devno)
                fail_fn = ParseTuple;
                goto cs_failed;
        }
-       if ((fail_rc =
-            pcmcia_get_configuration_info(handle, &conf)) != CS_SUCCESS) {
-               fail_fn = GetConfigurationInfo;
-               goto cs_failed;
-       }
 
        link->state |= DEV_CONFIG;
        link->conf.ConfigBase = parse.config.base;
        link->conf.Present = parse.config.rmask[0];
-       link->conf.Vcc = conf.Vcc;
 
        link->io.BasePort2 = 0;
        link->io.NumPorts2 = 0;
index 47f10c8..94ecd03 100644 (file)
@@ -520,7 +520,6 @@ static void reader_config(dev_link_t *link, int devno)
        struct reader_dev *dev;
        tuple_t tuple;
        cisparse_t parse;
-       config_info_t conf;
        u_char buf[64];
        int fail_fn, fail_rc;
        int rc;
@@ -546,16 +545,10 @@ static void reader_config(dev_link_t *link, int devno)
                fail_fn = ParseTuple;
                goto cs_failed;
        }
-       if ((fail_rc = pcmcia_get_configuration_info(handle, &conf))
-                                                       != CS_SUCCESS) {
-               fail_fn = GetConfigurationInfo;
-               goto cs_failed;
-       }
 
        link->state |= DEV_CONFIG;
        link->conf.ConfigBase = parse.config.base;
        link->conf.Present = parse.config.rmask[0];
-       link->conf.Vcc = conf.Vcc;
 
        link->io.BasePort2 = 0;
        link->io.NumPorts2 = 0;
index d3ea53a..a6cbd32 100644 (file)
@@ -576,7 +576,6 @@ static int mgslpc_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = NULL;
     
     link->conf.Attributes = 0;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -604,7 +603,6 @@ static void mgslpc_config(dev_link_t *link)
     cisparse_t parse;
     int last_fn, last_ret;
     u_char buf[64];
-    config_info_t conf;
     cistpl_cftable_entry_t dflt = { 0 };
     cistpl_cftable_entry_t *cfg;
     
@@ -626,10 +624,6 @@ static void mgslpc_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up the current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
-
     /* get CIS configuration entry */
 
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -662,7 +656,6 @@ static void mgslpc_config(dev_link_t *link)
     }
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 8;
     link->conf.Present = PRESENT_OPTION;
index 7ad8a95..3b5b55f 100644 (file)
@@ -122,7 +122,6 @@ static int ide_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -222,7 +221,6 @@ static void ide_config(dev_link_t *link)
 
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));
-    link->conf.Vcc = stk->conf.Vcc;
 
     pass = io_base = ctl_base = 0;
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -244,10 +242,10 @@ static void ide_config(dev_link_t *link)
        }
 
        if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-           link->conf.Vpp1 = link->conf.Vpp2 =
+           link->conf.Vpp =
                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
        else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-           link->conf.Vpp1 = link->conf.Vpp2 =
+           link->conf.Vpp =
                stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
        if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
@@ -329,9 +327,8 @@ static void ide_config(dev_link_t *link)
     info->node.minor = 0;
     info->hd = hd;
     link->dev = &info->node;
-    printk(KERN_INFO "ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",
-          info->node.dev_name, link->conf.Vcc / 10, link->conf.Vcc % 10,
-          link->conf.Vpp1 / 10, link->conf.Vpp1 % 10);
+    printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
+          info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
 
     link->state &= ~DEV_CONFIG_PENDING;
     kfree(stk);
index ae70247..0c504dc 100644 (file)
@@ -123,7 +123,6 @@ static int avmcs_attach(struct pcmcia_device *p_dev)
     
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index 5e847cf..8d23e5a 100644 (file)
@@ -153,7 +153,6 @@ static int avma1cs_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index b76b303..00835d5 100644 (file)
@@ -170,7 +170,6 @@ static int elsa_cs_attach(struct pcmcia_device *p_dev)
     link->io.IOAddrLines = 3;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -324,11 +323,8 @@ static void elsa_cs_config(dev_link_t *link)
     link->dev = &dev->node;
 
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-           dev->node.dev_name, link->conf.ConfigIndex,
-           link->conf.Vcc/10, link->conf.Vcc%10);
-    if (link->conf.Vpp1)
-        printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+    printk(KERN_INFO "%s: index 0x%02x: ",
+           dev->node.dev_name, link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
         printk(", irq %d", link->irq.AssignedIRQ);
     if (link->io.NumPorts1)
index 5745eb1..a3cd1c5 100644 (file)
@@ -184,7 +184,6 @@ static int sedlbauer_attach(struct pcmcia_device *p_dev)
 
 
     link->conf.Attributes = 0;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -263,9 +262,7 @@ static void sedlbauer_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
 
     /*
       In this loop, we scan the CIS for configuration table entries,
@@ -309,10 +306,10 @@ static void sedlbauer_config(dev_link_t *link)
        }
            
        if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-           link->conf.Vpp1 = link->conf.Vpp2 =
+           link->conf.Vpp =
                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
        else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-           link->conf.Vpp1 = link->conf.Vpp2 =
+           link->conf.Vpp =
                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
        
        /* Do we need to allocate an interrupt? */
@@ -403,11 +400,10 @@ static void sedlbauer_config(dev_link_t *link)
     link->dev = &dev->node;
 
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-          dev->node.dev_name, link->conf.ConfigIndex,
-          link->conf.Vcc/10, link->conf.Vcc%10);
-    if (link->conf.Vpp1)
-       printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+    printk(KERN_INFO "%s: index 0x%02x:",
+          dev->node.dev_name, link->conf.ConfigIndex);
+    if (link->conf.Vpp)
+       printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
        printk(", irq %d", link->irq.AssignedIRQ);
     if (link->io.NumPorts1)
index 929507e..040f098 100644 (file)
@@ -161,7 +161,6 @@ static int teles_attach(struct pcmcia_device *p_dev)
     link->io.IOAddrLines = 5;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -315,11 +314,8 @@ static void teles_cs_config(dev_link_t *link)
     link->dev = &dev->node;
 
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-           dev->node.dev_name, link->conf.ConfigIndex,
-           link->conf.Vcc/10, link->conf.Vcc%10);
-    if (link->conf.Vpp1)
-        printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+    printk(KERN_INFO "%s: index 0x%02x:",
+           dev->node.dev_name, link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
         printk(", irq %d", link->irq.AssignedIRQ);
     if (link->io.NumPorts1)
index f45ff25..0026460 100644 (file)
@@ -587,13 +587,10 @@ static void pcmciamtd_config(dev_link_t *link)
        DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
        dev->vpp = (vpp) ? vpp : t.Vpp1;
        link->conf.Attributes = 0;
-       link->conf.Vcc = t.Vcc;
        if(setvpp == 2) {
-               link->conf.Vpp1 = dev->vpp;
-               link->conf.Vpp2 = dev->vpp;
+               link->conf.Vpp = dev->vpp;
        } else {
-               link->conf.Vpp1 = 0;
-               link->conf.Vpp2 = 0;
+               link->conf.Vpp = 0;
        }
 
        link->conf.IntType = INT_MEMORY;
index 8dfa30b..179c9b7 100644 (file)
@@ -280,7 +280,6 @@ static int tc574_attach(struct pcmcia_device *p_dev)
        link->irq.Handler = &el3_interrupt;
        link->irq.Instance = dev;
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->conf.ConfigIndex = 1;
        link->conf.Present = PRESENT_OPTION;
index b15066b..7e8036f 100644 (file)
@@ -194,7 +194,6 @@ static int tc589_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &el3_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index c34547c..5ca0d57 100644 (file)
@@ -302,7 +302,6 @@ static void axnet_config(dev_link_t *link)
     cisparse_t parse;
     int i, j, last_ret, last_fn;
     u_short buf[64];
-    config_info_t conf;
 
     DEBUG(0, "axnet_config(0x%p)\n", link);
 
@@ -321,10 +320,6 @@ static void axnet_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
-
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
index 0748c3d..e14d3d1 100644 (file)
@@ -178,7 +178,6 @@ static int com20020_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
index 62efbc7..34bf963 100644 (file)
@@ -257,7 +257,6 @@ static int fmvj18x_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The FMVJ18x specific entries in the device structure. */
@@ -396,12 +395,7 @@ static void fmvj18x_config(dev_link_t *link)
        switch (le16_to_cpu(buf[0])) {
        case MANFID_TDK:
            cardtype = TDK;
-           if (le16_to_cpu(buf[1]) == PRODID_TDK_CF010) {
-               cs_status_t status;
-               pcmcia_get_status(handle, &status);
-               if (status.CardState & CS_EVENT_3VCARD)
-                   link->conf.Vcc = 33; /* inserted in 3.3V slot */
-           } else if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
+           if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
                        || le16_to_cpu(buf[1]) == PRODID_TDK_NP9610
                        || le16_to_cpu(buf[1]) == PRODID_TDK_MN3200) {
                /* MultiFunction Card */
index 6d7f8f5..904c5cb 100644 (file)
@@ -167,7 +167,6 @@ static int ibmtr_attach(struct pcmcia_device *p_dev)
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &tok_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
index cf2a50c..c25d945 100644 (file)
@@ -469,7 +469,6 @@ static int nmclan_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &mace_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index 3a2b731..5a7e58a 100644 (file)
@@ -531,7 +531,6 @@ static void pcnet_config(dev_link_t *link)
     int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
     int manfid = 0, prodid = 0, has_shmem = 0;
     u_short buf[64];
-    config_info_t conf;
     hw_info_t *hw_info;
 
     DEBUG(0, "pcnet_config(0x%p)\n", link);
@@ -550,10 +549,6 @@ static void pcnet_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
-
     tuple.DesiredTuple = CISTPL_MANFID;
     tuple.Attributes = TUPLE_RETURN_COMMON;
     if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) &&
index 86942c0..b46b7e1 100644 (file)
@@ -334,7 +334,6 @@ static int smc91c92_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &smc_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The SMC91c92-specific entries in the device structure. */
index 19347bc..f5fa86d 100644 (file)
@@ -571,7 +571,6 @@ xirc2ps_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index adb90b6..2216c04 100644 (file)
@@ -168,7 +168,6 @@ static int airo_attach(struct pcmcia_device *p_dev)
          device, and can be hard-wired here.
        */
        link->conf.Attributes = 0;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        
        /* Allocate space for private device-specific data */
@@ -294,16 +293,11 @@ static void airo_config(dev_link_t *link)
                
                /* Use power settings for Vcc and Vpp if present */
                /*  Note that the CIS values need to be rescaled */
-               if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
-               else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-               
                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
                
                /* Do we need to allocate an interrupt? */
@@ -391,11 +385,10 @@ static void airo_config(dev_link_t *link)
        link->dev = &dev->node;
        
        /* Finally, report what we've done */
-       printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-              dev->node.dev_name, link->conf.ConfigIndex,
-              link->conf.Vcc/10, link->conf.Vcc%10);
-       if (link->conf.Vpp1)
-               printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+       printk(KERN_INFO "%s: index 0x%02x: ",
+              dev->node.dev_name, link->conf.ConfigIndex);
+       if (link->conf.Vpp)
+               printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
        if (link->conf.Attributes & CONF_ENABLE_IRQ)
                printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
index 89dbc78..53fdaa2 100644 (file)
@@ -179,7 +179,6 @@ static int atmel_attach(struct pcmcia_device *p_dev)
          device, and can be hard-wired here.
        */
        link->conf.Attributes = 0;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        /* Allocate space for private device-specific data */
@@ -314,16 +313,11 @@ static void atmel_config(dev_link_t *link)
                
                /* Use power settings for Vcc and Vpp if present */
                /*  Note that the CIS values need to be rescaled */
-               if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
-               else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-               
                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
                
                /* Do we need to allocate an interrupt? */
index 0fb6251..69024bf 100644 (file)
@@ -512,7 +512,6 @@ static int prism2_attach(struct pcmcia_device *p_dev)
        memset(link, 0, sizeof(dev_link_t));
 
        PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-       link->conf.Vcc = 33;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
@@ -603,9 +602,6 @@ static int prism2_config(dev_link_t *link)
 
        CS_CHECK(GetConfigurationInfo,
                 pcmcia_get_configuration_info(link->handle, &conf));
-       PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info,
-              ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc);
-       link->conf.Vcc = conf.Vcc;
 
        /* Look for an appropriate configuration table entry in the CIS */
        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -650,10 +646,10 @@ static int prism2_config(dev_link_t *link)
                }
 
                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
                /* Do we need to allocate an interrupt? */
@@ -745,12 +741,11 @@ static int prism2_config(dev_link_t *link)
        dev->base_addr = link->io.BasePort1;
 
        /* Finally, report what we've done */
-       printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-              dev_info, link->conf.ConfigIndex,
-              link->conf.Vcc / 10, link->conf.Vcc % 10);
-       if (link->conf.Vpp1)
-               printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-                      link->conf.Vpp1 % 10);
+       printk(KERN_INFO "%s: index 0x%02x: ",
+              dev_info, link->conf.ConfigIndex);
+       if (link->conf.Vpp)
+               printk(", Vpp %d.%d", link->conf.Vpp / 10,
+                      link->conf.Vpp % 10);
        if (link->conf.Attributes & CONF_ENABLE_IRQ)
                printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
index 545717b..23d6b33 100644 (file)
@@ -406,7 +406,6 @@ static int netwave_attach(struct pcmcia_device *p_dev)
     
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index 89e16cd..75981d8 100644 (file)
@@ -218,8 +218,7 @@ orinoco_cs_config(dev_link_t *link)
 
        /* Look up the current Vcc */
        CS_CHECK(GetConfigurationInfo,
-                pcmcia_get_configuration_info(handle, &conf));
-       link->conf.Vcc = conf.Vcc;
+                pcmcia_get_configuration_info(link->handle, &conf));
 
        /*
         * In this loop, we scan the CIS for configuration table
@@ -274,10 +273,10 @@ orinoco_cs_config(dev_link_t *link)
                }
 
                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                            cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
                
                /* Do we need to allocate an interrupt? */
@@ -373,12 +372,11 @@ orinoco_cs_config(dev_link_t *link)
        link->state &= ~DEV_CONFIG_PENDING;
 
        /* Finally, report what we've done */
-       printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
-              dev->name, link->conf.ConfigIndex,
-              link->conf.Vcc / 10, link->conf.Vcc % 10);
-       if (link->conf.Vpp1)
-               printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-                      link->conf.Vpp1 % 10);
+       printk(KERN_DEBUG "%s: index 0x%02x: ",
+              dev->name, link->conf.ConfigIndex);
+       if (link->conf.Vpp)
+               printk(", Vpp %d.%d", link->conf.Vpp / 10,
+                      link->conf.Vpp % 10);
        printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
                printk(", io 0x%04x-0x%04x", link->io.BasePort1,
index ed4bf50..7d95587 100644 (file)
@@ -342,7 +342,6 @@ static int ray_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
index 0429f1d..7a4a80b 100644 (file)
@@ -692,7 +692,6 @@ spectrum_cs_config(dev_link_t *link)
        /* Look up the current Vcc */
        CS_CHECK(GetConfigurationInfo,
                 pcmcia_get_configuration_info(handle, &conf));
-       link->conf.Vcc = conf.Vcc;
 
        /*
         * In this loop, we scan the CIS for configuration table
@@ -747,10 +746,10 @@ spectrum_cs_config(dev_link_t *link)
                }
 
                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                            cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
                
                /* Do we need to allocate an interrupt? */
@@ -851,12 +850,11 @@ spectrum_cs_config(dev_link_t *link)
        link->state &= ~DEV_CONFIG_PENDING;
 
        /* Finally, report what we've done */
-       printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
-              dev->name, link->conf.ConfigIndex,
-              link->conf.Vcc / 10, link->conf.Vcc % 10);
-       if (link->conf.Vpp1)
-               printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-                      link->conf.Vpp1 % 10);
+       printk(KERN_DEBUG "%s: index 0x%02x: ",
+              dev->name, link->conf.ConfigIndex);
+       if (link->conf.Vpp)
+               printk(", Vpp %d.%d", link->conf.Vpp / 10,
+                      link->conf.Vpp % 10);
        printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
                printk(", io 0x%04x-0x%04x", link->io.BasePort1,
index 8cabcfe..daa17dc 100644 (file)
@@ -4607,7 +4607,6 @@ wavelan_attach(struct pcmcia_device *p_dev)
 
   /* General socket configuration */
   link->conf.Attributes = CONF_ENABLE_IRQ;
-  link->conf.Vcc = 50;
   link->conf.IntType = INT_MEMORY_AND_IO;
 
   /* Chain drivers */
index 3a93a8b..393b5cb 100644 (file)
@@ -1976,7 +1976,6 @@ static int wl3501_attach(struct pcmcia_device *p_dev)
 
        /* General socket configuration */
        link->conf.Attributes   = CONF_ENABLE_IRQ;
-       link->conf.Vcc          = 50;
        link->conf.IntType      = INT_MEMORY_AND_IO;
        link->conf.ConfigIndex  = 1;
        link->conf.Present      = PRESENT_OPTION;
index 5e12ed2..8d60146 100644 (file)
@@ -117,7 +117,6 @@ static int parport_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     link->handle = p_dev;
@@ -168,7 +167,6 @@ void parport_config(dev_link_t *link)
     tuple_t tuple;
     u_short buf[128];
     cisparse_t parse;
-    config_info_t conf;
     cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
     cistpl_cftable_entry_t dflt = { 0 };
     struct parport *p;
@@ -189,9 +187,6 @@ void parport_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Not sure if this is right... look up the current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
index 16504f8..17e2fbf 100644 (file)
@@ -618,11 +618,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
                return CS_CONFIGURATION_LOCKED;
 
        /* Do power control.  We don't allow changes in Vcc. */
-       if (s->socket.Vcc != req->Vcc)
-               return CS_BAD_VCC;
-       if (req->Vpp1 != req->Vpp2)
-               return CS_BAD_VPP;
-       s->socket.Vpp = req->Vpp1;
+       s->socket.Vpp = req->Vpp;
        if (s->ops->set_socket(s, &s->socket))
                return CS_BAD_VPP;
 
index 7fbef1e..12ec94d 100644 (file)
@@ -119,7 +119,6 @@ static int aha152x_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
index 20b9b27..b3cd206 100644 (file)
@@ -101,7 +101,6 @@ static int fdomain_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
index e313b40..e41e1fe 100644 (file)
@@ -1627,7 +1627,6 @@ static int nsp_cs_attach(struct pcmcia_device *p_dev)
 
        /* General socket configuration */
        link->conf.Attributes    = CONF_ENABLE_IRQ;
-       link->conf.Vcc           = 50;
        link->conf.IntType       = INT_MEMORY_AND_IO;
        link->conf.Present       = PRESENT_OPTION;
 
@@ -1709,7 +1708,6 @@ static void nsp_cs_config(dev_link_t *link)
 
        /* Look up the current Vcc */
        CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-       link->conf.Vcc = conf.Vcc;
 
        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
@@ -1743,10 +1741,10 @@ static void nsp_cs_config(dev_link_t *link)
                }
 
                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
                }
 
@@ -1905,11 +1903,10 @@ static void nsp_cs_config(dev_link_t *link)
 #endif
 
        /* Finally, report what we've done */
-       printk(KERN_INFO "nsp_cs: index 0x%02x: Vcc %d.%d",
-              link->conf.ConfigIndex,
-              link->conf.Vcc/10, link->conf.Vcc%10);
-       if (link->conf.Vpp1) {
-               printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+       printk(KERN_INFO "nsp_cs: index 0x%02x: ",
+              link->conf.ConfigIndex);
+       if (link->conf.Vpp) {
+               printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
        }
        if (link->conf.Attributes & CONF_ENABLE_IRQ) {
                printk(", irq %d", link->irq.AssignedIRQ);
index 5a8da51..4f28589 100644 (file)
@@ -176,7 +176,6 @@ static int qlogic_attach(struct pcmcia_device *p_dev)
        link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->conf.Present = PRESENT_OPTION;
 
index 4a69885..2bce7b0 100644 (file)
@@ -916,7 +916,6 @@ SYM53C500_attach(struct pcmcia_device *p_dev)
        link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->conf.Present = PRESENT_OPTION;
 
index b6b460f..1e6889f 100644 (file)
@@ -358,7 +358,6 @@ static int simple_config(dev_link_t *link)
                        return setup_serial(handle, info, port, config.AssignedIRQ);
                }
        }
-       link->conf.Vcc = config.Vcc;
 
        /* First pass: look for a config entry that looks normal. */
        tuple->TupleData = (cisdata_t *) buf;
@@ -374,7 +373,7 @@ static int simple_config(dev_link_t *link)
                                if (i != CS_SUCCESS)
                                        goto next_entry;
                                if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                                       link->conf.Vpp1 = link->conf.Vpp2 =
+                                       link->conf.Vpp =
                                            cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                                if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
                                            (cf->io.win[0].base != 0)) {
@@ -445,7 +444,6 @@ static int multi_config(dev_link_t * link)
        u_char *buf;
        cisparse_t *parse;
        cistpl_cftable_entry_t *cf;
-       config_info_t config;
        int i, rc, base2 = 0;
 
        cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
@@ -456,14 +454,6 @@ static int multi_config(dev_link_t * link)
        cf = &parse->cftable_entry;
        buf = cfg_mem->buf;
 
-       i = pcmcia_get_configuration_info(handle, &config);
-       if (i != CS_SUCCESS) {
-               cs_error(handle, GetConfigurationInfo, i);
-               rc = -1;
-               goto free_cfg_mem;
-       }
-       link->conf.Vcc = config.Vcc;
-
        tuple->TupleData = (cisdata_t *) buf;
        tuple->TupleOffset = 0;
        tuple->TupleDataMax = 255;
index 5094655..de794b2 100644 (file)
@@ -51,7 +51,6 @@ static int ixj_attach(struct pcmcia_device *p_dev)
        link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
        link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
        link->io.IOAddrLines = 3;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->priv = kmalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
        if (!link->priv) {
@@ -157,7 +156,6 @@ static void ixj_config(dev_link_t * link)
        tuple_t tuple;
        u_short buf[128];
        cisparse_t parse;
-       config_info_t conf;
        cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
        cistpl_cftable_entry_t dflt =
        {
@@ -178,7 +176,6 @@ static void ixj_config(dev_link_t * link)
        link->conf.ConfigBase = parse.config.base;
        link->conf.Present = parse.config.rmask[0];
        link->state |= DEV_CONFIG;
-       CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
        tuple.Attributes = 0;
        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
index ca3fc33..c6f1baf 100644 (file)
@@ -191,7 +191,6 @@ static void sl811_cs_config(dev_link_t *link)
        /* Look up the current Vcc */
        CS_CHECK(GetConfigurationInfo,
                        pcmcia_get_configuration_info(handle, &conf));
-       link->conf.Vcc = conf.Vcc;
 
        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
@@ -225,10 +224,10 @@ static void sl811_cs_config(dev_link_t *link)
                }
 
                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-                       link->conf.Vpp1 = link->conf.Vpp2 =
+                       link->conf.Vpp =
                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
 
                /* we need an interrupt */
@@ -271,11 +270,10 @@ next_entry:
        dev->node.major = dev->node.minor = 0;
        link->dev = &dev->node;
 
-       printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-              dev->node.dev_name, link->conf.ConfigIndex,
-              link->conf.Vcc/10, link->conf.Vcc%10);
-       if (link->conf.Vpp1)
-               printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+       printk(KERN_INFO "%s: index 0x%02x: ",
+              dev->node.dev_name, link->conf.ConfigIndex);
+       if (link->conf.Vpp)
+               printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
        printk(", irq %d", link->irq.AssignedIRQ);
        printk(", io 0x%04x-0x%04x", link->io.BasePort1,
               link->io.BasePort1+link->io.NumPorts1-1);
@@ -311,7 +309,6 @@ static int sl811_cs_attach(struct pcmcia_device *p_dev)
        link->irq.Handler = NULL;
 
        link->conf.Attributes = 0;
-       link->conf.Vcc = 33;
        link->conf.IntType = INT_MEMORY_AND_IO;
 
        link->handle = p_dev;
index 087b3bc..e0835d6 100644 (file)
@@ -125,7 +125,7 @@ typedef struct modconf_t {
 /* For RequestConfiguration */
 typedef struct config_req_t {
     u_int      Attributes;
-    u_int      Vcc, Vpp1, Vpp2;
+    u_int      Vpp; /* both Vpp1 and Vpp2 */
     u_int      IntType;
     u_int      ConfigBase;
     u_char     Status, Pin, Copy, ExtStatus;
index 31f4bdc..7c4091a 100644 (file)
@@ -230,7 +230,6 @@ static void pdacf_config(dev_link_t *link)
        struct snd_pdacf *pdacf = link->priv;
        tuple_t tuple;
        cisparse_t *parse = NULL;
-       config_info_t conf;
        u_short buf[32];
        int last_fn, last_ret;
 
@@ -253,9 +252,6 @@ static void pdacf_config(dev_link_t *link)
        link->conf.ConfigIndex = 0x5;
        kfree(parse);
 
-       CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-       link->conf.Vcc = conf.Vcc;
-
        /* Configure card */
        link->state |= DEV_CONFIG;
 
index e101e05..ff2f927 100644 (file)
@@ -161,7 +161,6 @@ static struct snd_vxpocket *snd_vxpocket_new(struct snd_card *card, int ibl)
        link->irq.Instance = chip;
 
        link->conf.Attributes = CONF_ENABLE_IRQ;
-       link->conf.Vcc = 50;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->conf.ConfigIndex = 1;
        link->conf.Present = PRESENT_OPTION;