Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Tue, 2 Mar 2010 15:55:08 +0000 (07:55 -0800)]
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits)
  virtio_net: remove forgotten assignment
  be2net: fix tx completion polling
  sis190: fix cable detect via link status poll
  net: fix protocol sk_buff field
  bridge: Fix build error when IGMP_SNOOPING is not enabled
  bnx2x: Tx barriers and locks
  scm: Only support SCM_RIGHTS on unix domain sockets.
  vhost-net: restart tx poll on sk_sndbuf full
  vhost: fix get_user_pages_fast error handling
  vhost: initialize log eventfd context pointer
  vhost: logging thinko fix
  wireless: convert to use netdev_for_each_mc_addr
  ethtool: do not set some flags, if others failed
  ipoib: returned back addrlen check for mc addresses
  netlink: Adding inode field to /proc/net/netlink
  axnet_cs: add new id
  bridge: Make IGMP snooping depend upon BRIDGE.
  bridge: Add multicast count/interval sysfs entries
  bridge: Add hash elasticity/max sysfs entries
  bridge: Add multicast_snooping sysfs toggle
  ...

Trivial conflicts in Documentation/feature-removal-schedule.txt

1034 files changed:
Documentation/ABI/testing/sysfs-block
Documentation/arm/memory.txt
Documentation/block/queue-sysfs.txt
Documentation/cachetlb.txt
Documentation/feature-removal-schedule.txt
Documentation/input/sentelic.txt
Documentation/sound/alsa/ALSA-Configuration.txt
Documentation/sound/alsa/HD-Audio-Models.txt
Documentation/sound/alsa/HD-Audio.txt
arch/alpha/include/asm/pgtable.h
arch/arm/Kconfig
arch/arm/Makefile
arch/arm/boot/compressed/Makefile
arch/arm/boot/compressed/decompress.c [new file with mode: 0644]
arch/arm/boot/compressed/head.S
arch/arm/boot/compressed/misc.c
arch/arm/boot/compressed/vmlinux.lds.in
arch/arm/common/clkdev.c
arch/arm/common/dmabounce.c
arch/arm/common/vic.c
arch/arm/configs/at572d940hfek_defconfig [new file with mode: 0644]
arch/arm/configs/omap_4430sdp_defconfig
arch/arm/include/asm/atomic.h
arch/arm/include/asm/cacheflush.h
arch/arm/include/asm/clkdev.h
arch/arm/include/asm/dma-mapping.h
arch/arm/include/asm/io.h
arch/arm/include/asm/mach/time.h
arch/arm/include/asm/memory.h
arch/arm/include/asm/mmu.h
arch/arm/include/asm/mmu_context.h
arch/arm/include/asm/page.h
arch/arm/include/asm/perf_event.h [new file with mode: 0644]
arch/arm/include/asm/pgtable-nommu.h
arch/arm/include/asm/pmu.h [new file with mode: 0644]
arch/arm/include/asm/setup.h
arch/arm/include/asm/smp_plat.h
arch/arm/include/asm/spinlock.h
arch/arm/include/asm/system.h
arch/arm/include/asm/thread_info.h
arch/arm/include/asm/tlbflush.h
arch/arm/kernel/Makefile
arch/arm/kernel/asm-offsets.c
arch/arm/kernel/debug.S
arch/arm/kernel/leds.c [new file with mode: 0644]
arch/arm/kernel/perf_event.c [new file with mode: 0644]
arch/arm/kernel/pmu.c [new file with mode: 0644]
arch/arm/kernel/ptrace.c
arch/arm/kernel/setup.c
arch/arm/kernel/time.c
arch/arm/kernel/traps.c
arch/arm/kernel/vmlinux.lds.S
arch/arm/mach-aaec2000/include/mach/debug-macro.S
arch/arm/mach-at91/Kconfig
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/at572d940hf.c [new file with mode: 0644]
arch/arm/mach-at91/at572d940hf_devices.c [new file with mode: 0644]
arch/arm/mach-at91/board-at572d940hf_ek.c [new file with mode: 0644]
arch/arm/mach-at91/clock.c
arch/arm/mach-at91/clock.h
arch/arm/mach-at91/generic.h
arch/arm/mach-at91/include/mach/at572d940hf.h [new file with mode: 0644]
arch/arm/mach-at91/include/mach/at572d940hf_matrix.h [new file with mode: 0644]
arch/arm/mach-at91/include/mach/at91_pmc.h
arch/arm/mach-at91/include/mach/board.h
arch/arm/mach-at91/include/mach/cpu.h
arch/arm/mach-at91/include/mach/debug-macro.S
arch/arm/mach-at91/include/mach/hardware.h
arch/arm/mach-at91/include/mach/timex.h
arch/arm/mach-bcmring/core.c
arch/arm/mach-clps711x/include/mach/debug-macro.S
arch/arm/mach-davinci/Kconfig
arch/arm/mach-davinci/Makefile
arch/arm/mach-davinci/board-da830-evm.c
arch/arm/mach-davinci/board-da850-evm.c
arch/arm/mach-davinci/board-dm355-evm.c
arch/arm/mach-davinci/board-dm365-evm.c
arch/arm/mach-davinci/board-dm644x-evm.c
arch/arm/mach-davinci/board-dm646x-evm.c
arch/arm/mach-davinci/cdce949.c [new file with mode: 0644]
arch/arm/mach-davinci/clock.c
arch/arm/mach-davinci/clock.h
arch/arm/mach-davinci/common.c
arch/arm/mach-davinci/cpuidle.c
arch/arm/mach-davinci/da830.c
arch/arm/mach-davinci/da850.c
arch/arm/mach-davinci/devices-da8xx.c
arch/arm/mach-davinci/dm355.c
arch/arm/mach-davinci/dm365.c
arch/arm/mach-davinci/dm644x.c
arch/arm/mach-davinci/dm646x.c
arch/arm/mach-davinci/dma.c
arch/arm/mach-davinci/include/mach/cdce949.h [new file with mode: 0644]
arch/arm/mach-davinci/include/mach/common.h
arch/arm/mach-davinci/include/mach/cpuidle.h
arch/arm/mach-davinci/include/mach/da8xx.h
arch/arm/mach-davinci/include/mach/debug-macro.S
arch/arm/mach-davinci/include/mach/dm365.h
arch/arm/mach-davinci/include/mach/dm644x.h
arch/arm/mach-davinci/include/mach/dm646x.h
arch/arm/mach-davinci/include/mach/edma.h
arch/arm/mach-davinci/include/mach/hardware.h
arch/arm/mach-davinci/include/mach/i2c.h
arch/arm/mach-davinci/include/mach/memory.h
arch/arm/mach-davinci/include/mach/mux.h
arch/arm/mach-davinci/include/mach/pm.h [new file with mode: 0644]
arch/arm/mach-davinci/include/mach/psc.h
arch/arm/mach-davinci/include/mach/spi.h [new file with mode: 0644]
arch/arm/mach-davinci/include/mach/timex.h
arch/arm/mach-davinci/io.c
arch/arm/mach-davinci/pm.c [new file with mode: 0644]
arch/arm/mach-davinci/psc.c
arch/arm/mach-davinci/sleep.S [new file with mode: 0644]
arch/arm/mach-dove/include/mach/debug-macro.S
arch/arm/mach-dove/include/mach/vmalloc.h
arch/arm/mach-ebsa110/include/mach/debug-macro.S
arch/arm/mach-ep93xx/Kconfig
arch/arm/mach-ep93xx/Makefile
arch/arm/mach-ep93xx/clock.c
arch/arm/mach-ep93xx/core.c
arch/arm/mach-ep93xx/dma-m2p.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gpio.c
arch/arm/mach-ep93xx/include/mach/debug-macro.S
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
arch/arm/mach-ep93xx/include/mach/vmalloc.h
arch/arm/mach-ep93xx/simone.c [new file with mode: 0644]
arch/arm/mach-ep93xx/snappercl15.c [new file with mode: 0644]
arch/arm/mach-footbridge/common.c
arch/arm/mach-footbridge/include/mach/debug-macro.S
arch/arm/mach-gemini/include/mach/debug-macro.S
arch/arm/mach-gemini/include/mach/vmalloc.h
arch/arm/mach-h720x/include/mach/debug-macro.S
arch/arm/mach-integrator/core.c
arch/arm/mach-integrator/include/mach/debug-macro.S
arch/arm/mach-integrator/integrator_cp.c
arch/arm/mach-iop13xx/include/mach/debug-macro.S
arch/arm/mach-iop13xx/io.c
arch/arm/mach-iop32x/include/mach/debug-macro.S
arch/arm/mach-iop32x/include/mach/vmalloc.h
arch/arm/mach-iop33x/include/mach/debug-macro.S
arch/arm/mach-iop33x/include/mach/vmalloc.h
arch/arm/mach-ixp2000/include/mach/debug-macro.S
arch/arm/mach-ixp2000/include/mach/vmalloc.h
arch/arm/mach-ixp23xx/include/mach/debug-macro.S
arch/arm/mach-ixp23xx/include/mach/vmalloc.h
arch/arm/mach-ixp4xx/common.c
arch/arm/mach-ixp4xx/include/mach/debug-macro.S
arch/arm/mach-ixp4xx/include/mach/vmalloc.h
arch/arm/mach-kirkwood/include/mach/debug-macro.S
arch/arm/mach-kirkwood/include/mach/vmalloc.h
arch/arm/mach-ks8695/include/mach/debug-macro.S
arch/arm/mach-l7200/include/mach/debug-macro.S
arch/arm/mach-lh7a40x/include/mach/debug-macro.S
arch/arm/mach-lh7a40x/include/mach/vmalloc.h
arch/arm/mach-loki/include/mach/debug-macro.S
arch/arm/mach-loki/include/mach/vmalloc.h
arch/arm/mach-mmp/clock.c
arch/arm/mach-mmp/clock.h
arch/arm/mach-mmp/include/mach/debug-macro.S
arch/arm/mach-mmp/include/mach/vmalloc.h
arch/arm/mach-mmp/pxa168.c
arch/arm/mach-mmp/pxa910.c
arch/arm/mach-msm/include/mach/debug-macro.S
arch/arm/mach-msm/io.c
arch/arm/mach-mv78xx0/include/mach/debug-macro.S
arch/arm/mach-mv78xx0/include/mach/vmalloc.h
arch/arm/mach-mx1/clock.c
arch/arm/mach-mx2/clock_imx21.c
arch/arm/mach-mx2/clock_imx27.c
arch/arm/mach-mx25/clock.c
arch/arm/mach-mx3/clock-imx35.c
arch/arm/mach-mx3/clock.c
arch/arm/mach-mxc91231/clock.c
arch/arm/mach-netx/include/mach/debug-macro.S
arch/arm/mach-nomadik/include/mach/debug-macro.S
arch/arm/mach-nomadik/include/mach/vmalloc.h
arch/arm/mach-ns9xxx/include/mach/debug-macro.S
arch/arm/mach-ns9xxx/include/mach/vmalloc.h
arch/arm/mach-nuc93x/Kconfig [new file with mode: 0644]
arch/arm/mach-nuc93x/Makefile [new file with mode: 0644]
arch/arm/mach-nuc93x/Makefile.boot [new file with mode: 0644]
arch/arm/mach-nuc93x/clock.c [new file with mode: 0644]
arch/arm/mach-nuc93x/clock.h [new file with mode: 0644]
arch/arm/mach-nuc93x/cpu.c [new file with mode: 0644]
arch/arm/mach-nuc93x/cpu.h [new file with mode: 0644]
arch/arm/mach-nuc93x/dev.c [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/clkdev.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/entry-macro.S [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/hardware.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/io.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/irqs.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/map.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/memory.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/regs-clock.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/regs-ebi.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/regs-irq.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/regs-serial.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/regs-timer.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/system.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/timex.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/uncompress.h [new file with mode: 0644]
arch/arm/mach-nuc93x/include/mach/vmalloc.h [new file with mode: 0644]
arch/arm/mach-nuc93x/irq.c [new file with mode: 0644]
arch/arm/mach-nuc93x/mach-nuc932evb.c [new file with mode: 0644]
arch/arm/mach-nuc93x/nuc932.c [new file with mode: 0644]
arch/arm/mach-nuc93x/nuc932.h [new file with mode: 0644]
arch/arm/mach-nuc93x/time.c [new file with mode: 0644]
arch/arm/mach-omap1/include/mach/debug-macro.S
arch/arm/mach-omap2/board-4430sdp.c
arch/arm/mach-omap2/include/mach/debug-macro.S
arch/arm/mach-orion5x/include/mach/debug-macro.S
arch/arm/mach-orion5x/include/mach/vmalloc.h
arch/arm/mach-pnx4008/clock.c
arch/arm/mach-pnx4008/clock.h
arch/arm/mach-pnx4008/i2c.c
arch/arm/mach-pnx4008/include/mach/clkdev.h [new file with mode: 0644]
arch/arm/mach-pnx4008/include/mach/debug-macro.S
arch/arm/mach-pnx4008/include/mach/timex.h
arch/arm/mach-pnx4008/pm.c
arch/arm/mach-pnx4008/time.c
arch/arm/mach-pnx4008/time.h [new file with mode: 0644]
arch/arm/mach-pxa/clock.c
arch/arm/mach-pxa/clock.h
arch/arm/mach-pxa/eseries.c
arch/arm/mach-pxa/include/mach/debug-macro.S
arch/arm/mach-pxa/include/mach/vmalloc.h
arch/arm/mach-pxa/pxa25x.c
arch/arm/mach-pxa/pxa27x.c
arch/arm/mach-pxa/pxa300.c
arch/arm/mach-pxa/pxa320.c
arch/arm/mach-pxa/pxa3xx.c
arch/arm/mach-realview/core.c
arch/arm/mach-realview/include/mach/debug-macro.S
arch/arm/mach-realview/include/mach/vmalloc.h
arch/arm/mach-rpc/include/mach/debug-macro.S
arch/arm/mach-s3c2410/include/mach/debug-macro.S
arch/arm/mach-s3c24a0/include/mach/debug-macro.S
arch/arm/mach-s3c24a0/include/mach/vmalloc.h
arch/arm/mach-s3c6400/include/mach/debug-macro.S
arch/arm/mach-s5pc100/include/mach/debug-macro.S
arch/arm/mach-sa1100/include/mach/debug-macro.S
arch/arm/mach-sa1100/include/mach/vmalloc.h
arch/arm/mach-shark/include/mach/debug-macro.S
arch/arm/mach-u300/clock.c
arch/arm/mach-u300/core.c
arch/arm/mach-u300/gpio.c
arch/arm/mach-u300/include/mach/debug-macro.S
arch/arm/mach-u300/include/mach/dma_channels.h [new file with mode: 0644]
arch/arm/mach-u300/include/mach/vmalloc.h
arch/arm/mach-ux500/board-mop500.c
arch/arm/mach-ux500/clock.c
arch/arm/mach-ux500/cpu-u8500.c
arch/arm/mach-ux500/include/mach/debug-macro.S
arch/arm/mach-ux500/include/mach/vmalloc.h
arch/arm/mach-versatile/core.c
arch/arm/mach-versatile/include/mach/debug-macro.S
arch/arm/mach-w90x900/clock.c
arch/arm/mach-w90x900/clock.h
arch/arm/mach-w90x900/cpu.c
arch/arm/mach-w90x900/include/mach/vmalloc.h
arch/arm/mm/Kconfig
arch/arm/mm/alignment.c
arch/arm/mm/cache-fa.S
arch/arm/mm/cache-l2x0.c
arch/arm/mm/cache-v3.S
arch/arm/mm/cache-v4.S
arch/arm/mm/cache-v4wb.S
arch/arm/mm/cache-v4wt.S
arch/arm/mm/cache-v6.S
arch/arm/mm/cache-v7.S
arch/arm/mm/context.c
arch/arm/mm/copypage-feroceon.c
arch/arm/mm/copypage-v3.c
arch/arm/mm/copypage-v4mc.c
arch/arm/mm/copypage-v4wb.c
arch/arm/mm/copypage-v4wt.c
arch/arm/mm/copypage-v6.c
arch/arm/mm/copypage-xsc3.c
arch/arm/mm/copypage-xscale.c
arch/arm/mm/dma-mapping.c
arch/arm/mm/fault-armv.c
arch/arm/mm/fault.c
arch/arm/mm/flush.c
arch/arm/mm/init.c
arch/arm/mm/ioremap.c
arch/arm/mm/mmu.c
arch/arm/mm/nommu.c
arch/arm/mm/proc-arm1020.S
arch/arm/mm/proc-arm1020e.S
arch/arm/mm/proc-arm1022.S
arch/arm/mm/proc-arm1026.S
arch/arm/mm/proc-arm920.S
arch/arm/mm/proc-arm922.S
arch/arm/mm/proc-arm925.S
arch/arm/mm/proc-arm926.S
arch/arm/mm/proc-arm940.S
arch/arm/mm/proc-arm946.S
arch/arm/mm/proc-feroceon.S
arch/arm/mm/proc-mohawk.S
arch/arm/mm/proc-xsc3.S
arch/arm/mm/proc-xscale.S
arch/arm/oprofile/op_model_arm11_core.c
arch/arm/oprofile/op_model_arm11_core.h
arch/arm/oprofile/op_model_mpcore.c
arch/arm/oprofile/op_model_v6.c
arch/arm/oprofile/op_model_v7.c
arch/arm/oprofile/op_model_v7.h
arch/arm/oprofile/op_model_xscale.c
arch/arm/plat-iop/io.c
arch/arm/plat-mxc/Makefile
arch/arm/plat-mxc/include/mach/debug-macro.S
arch/arm/plat-mxc/include/mach/vmalloc.h
arch/arm/plat-mxc/ssi-fiq-ksym.c [new file with mode: 0644]
arch/arm/plat-mxc/ssi-fiq.S [new file with mode: 0644]
arch/arm/plat-nomadik/include/plat/i2c.h [new file with mode: 0644]
arch/arm/plat-omap/Kconfig
arch/arm/plat-omap/include/plat/omap44xx.h
arch/arm/plat-omap/io.c
arch/arm/plat-s3c/include/mach/vmalloc.h
arch/arm/plat-stmp3xxx/clock.c
arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
arch/arm/vfp/vfpmodule.c
arch/avr32/include/asm/pgtable.h
arch/avr32/mm/tlb.c
arch/cris/arch-v10/kernel/irq.c
arch/cris/arch-v32/kernel/irq.c
arch/cris/arch-v32/kernel/pinmux.c
arch/cris/arch-v32/mach-a3/pinmux.c
arch/cris/arch-v32/mach-fs/pinmux.c
arch/cris/include/asm/pgtable.h
arch/cris/kernel/irq.c
arch/frv/include/asm/pgtable.h
arch/ia64/Kconfig
arch/ia64/Makefile
arch/ia64/configs/bigsur_defconfig
arch/ia64/configs/generic_defconfig
arch/ia64/configs/gensparse_defconfig
arch/ia64/configs/sim_defconfig
arch/ia64/configs/tiger_defconfig
arch/ia64/configs/xen_domu_defconfig
arch/ia64/configs/zx1_defconfig
arch/ia64/hp/common/aml_nfw.c
arch/ia64/ia32/Makefile [deleted file]
arch/ia64/ia32/audit.c [deleted file]
arch/ia64/ia32/binfmt_elf32.c [deleted file]
arch/ia64/ia32/elfcore32.h [deleted file]
arch/ia64/ia32/ia32_entry.S [deleted file]
arch/ia64/ia32/ia32_ldt.c [deleted file]
arch/ia64/ia32/ia32_signal.c [deleted file]
arch/ia64/ia32/ia32_support.c [deleted file]
arch/ia64/ia32/ia32_traps.c [deleted file]
arch/ia64/ia32/ia32priv.h [deleted file]
arch/ia64/ia32/sys_ia32.c [deleted file]
arch/ia64/include/asm/acpi.h
arch/ia64/include/asm/ia32.h [deleted file]
arch/ia64/include/asm/pgtable.h
arch/ia64/include/asm/processor.h
arch/ia64/include/asm/scatterlist.h
arch/ia64/include/asm/syscall.h
arch/ia64/include/asm/system.h
arch/ia64/include/asm/unistd.h
arch/ia64/kernel/Makefile
arch/ia64/kernel/acpi.c
arch/ia64/kernel/audit.c
arch/ia64/kernel/entry.S
arch/ia64/kernel/ivt.S
arch/ia64/kernel/perfmon.c
arch/ia64/kernel/process.c
arch/ia64/kernel/ptrace.c
arch/ia64/kernel/setup.c
arch/ia64/kernel/signal.c
arch/ia64/kernel/smpboot.c
arch/ia64/kernel/time.c
arch/ia64/kernel/traps.c
arch/ia64/mm/init.c
arch/ia64/uv/kernel/setup.c
arch/ia64/xen/hypercall.S
arch/ia64/xen/xen_pv_ops.c
arch/m32r/include/asm/tlbflush.h
arch/m32r/mm/fault-nommu.c
arch/m32r/mm/fault.c
arch/m68k/include/asm/pgtable_mm.h
arch/microblaze/include/asm/tlbflush.h
arch/mips/include/asm/pgtable.h
arch/mn10300/include/asm/pgtable.h
arch/mn10300/mm/mmu-context.c
arch/parisc/include/asm/pgtable.h
arch/parisc/kernel/cache.c
arch/powerpc/include/asm/pgtable.h
arch/powerpc/mm/mem.c
arch/s390/include/asm/pgtable.h
arch/score/include/asm/pgtable.h
arch/sh/include/asm/pgtable.h
arch/sh/include/asm/siu.h [new file with mode: 0644]
arch/sh/mm/fault_32.c
arch/sparc/include/asm/pgtable_32.h
arch/sparc/include/asm/pgtable_64.h
arch/sparc/mm/fault_32.c
arch/sparc/mm/init_64.c
arch/sparc/mm/nosun4c.c
arch/sparc/mm/srmmu.c
arch/sparc/mm/sun4c.c
arch/um/drivers/ubd_kern.c
arch/um/include/asm/pgtable.h
arch/x86/include/asm/pgtable_32.h
arch/x86/include/asm/pgtable_64.h
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/hpet.c
arch/x86/kernel/tsc.c
arch/xtensa/include/asm/pgtable.h
arch/xtensa/mm/cache.c
block/blk-cgroup.c
block/blk-cgroup.h
block/blk-core.c
block/blk-ioc.c
block/blk-merge.c
block/blk-settings.c
block/blk-sysfs.c
block/cfq-iosched.c
block/elevator.c
drivers/acpi/acpica/accommon.h
drivers/acpi/acpica/acconfig.h
drivers/acpi/acpica/acdebug.h
drivers/acpi/acpica/acdispat.h
drivers/acpi/acpica/acevents.h
drivers/acpi/acpica/acglobal.h
drivers/acpi/acpica/achware.h
drivers/acpi/acpica/acinterp.h
drivers/acpi/acpica/aclocal.h
drivers/acpi/acpica/acmacros.h
drivers/acpi/acpica/acnamesp.h
drivers/acpi/acpica/acobject.h
drivers/acpi/acpica/acopcode.h
drivers/acpi/acpica/acparser.h
drivers/acpi/acpica/acpredef.h
drivers/acpi/acpica/acresrc.h
drivers/acpi/acpica/acstruct.h
drivers/acpi/acpica/actables.h
drivers/acpi/acpica/acutils.h
drivers/acpi/acpica/amlcode.h
drivers/acpi/acpica/amlresrc.h
drivers/acpi/acpica/dsfield.c
drivers/acpi/acpica/dsinit.c
drivers/acpi/acpica/dsmethod.c
drivers/acpi/acpica/dsmthdat.c
drivers/acpi/acpica/dsobject.c
drivers/acpi/acpica/dsopcode.c
drivers/acpi/acpica/dsutils.c
drivers/acpi/acpica/dswexec.c
drivers/acpi/acpica/dswload.c
drivers/acpi/acpica/dswscope.c
drivers/acpi/acpica/dswstate.c
drivers/acpi/acpica/evevent.c
drivers/acpi/acpica/evgpe.c
drivers/acpi/acpica/evgpeblk.c
drivers/acpi/acpica/evmisc.c
drivers/acpi/acpica/evregion.c
drivers/acpi/acpica/evrgnini.c
drivers/acpi/acpica/evsci.c
drivers/acpi/acpica/evxface.c
drivers/acpi/acpica/evxfevnt.c
drivers/acpi/acpica/evxfregn.c
drivers/acpi/acpica/exconfig.c
drivers/acpi/acpica/exconvrt.c
drivers/acpi/acpica/excreate.c
drivers/acpi/acpica/exdump.c
drivers/acpi/acpica/exfield.c
drivers/acpi/acpica/exfldio.c
drivers/acpi/acpica/exmisc.c
drivers/acpi/acpica/exmutex.c
drivers/acpi/acpica/exnames.c
drivers/acpi/acpica/exoparg1.c
drivers/acpi/acpica/exoparg2.c
drivers/acpi/acpica/exoparg3.c
drivers/acpi/acpica/exoparg6.c
drivers/acpi/acpica/exprep.c
drivers/acpi/acpica/exregion.c
drivers/acpi/acpica/exresnte.c
drivers/acpi/acpica/exresolv.c
drivers/acpi/acpica/exresop.c
drivers/acpi/acpica/exstore.c
drivers/acpi/acpica/exstoren.c
drivers/acpi/acpica/exstorob.c
drivers/acpi/acpica/exsystem.c
drivers/acpi/acpica/exutils.c
drivers/acpi/acpica/hwacpi.c
drivers/acpi/acpica/hwgpe.c
drivers/acpi/acpica/hwregs.c
drivers/acpi/acpica/hwsleep.c
drivers/acpi/acpica/hwtimer.c
drivers/acpi/acpica/hwvalid.c
drivers/acpi/acpica/hwxface.c
drivers/acpi/acpica/nsaccess.c
drivers/acpi/acpica/nsalloc.c
drivers/acpi/acpica/nsdump.c
drivers/acpi/acpica/nsdumpdv.c
drivers/acpi/acpica/nseval.c
drivers/acpi/acpica/nsinit.c
drivers/acpi/acpica/nsload.c
drivers/acpi/acpica/nsnames.c
drivers/acpi/acpica/nsobject.c
drivers/acpi/acpica/nsparse.c
drivers/acpi/acpica/nspredef.c
drivers/acpi/acpica/nsrepair.c
drivers/acpi/acpica/nsrepair2.c
drivers/acpi/acpica/nssearch.c
drivers/acpi/acpica/nsutils.c
drivers/acpi/acpica/nswalk.c
drivers/acpi/acpica/nsxfeval.c
drivers/acpi/acpica/nsxfname.c
drivers/acpi/acpica/nsxfobj.c
drivers/acpi/acpica/psargs.c
drivers/acpi/acpica/psloop.c
drivers/acpi/acpica/psopcode.c
drivers/acpi/acpica/psparse.c
drivers/acpi/acpica/psscope.c
drivers/acpi/acpica/pstree.c
drivers/acpi/acpica/psutils.c
drivers/acpi/acpica/pswalk.c
drivers/acpi/acpica/psxface.c
drivers/acpi/acpica/rsaddr.c
drivers/acpi/acpica/rscalc.c
drivers/acpi/acpica/rscreate.c
drivers/acpi/acpica/rsdump.c
drivers/acpi/acpica/rsinfo.c
drivers/acpi/acpica/rsio.c
drivers/acpi/acpica/rsirq.c
drivers/acpi/acpica/rslist.c
drivers/acpi/acpica/rsmemory.c
drivers/acpi/acpica/rsmisc.c
drivers/acpi/acpica/rsutils.c
drivers/acpi/acpica/rsxface.c
drivers/acpi/acpica/tbfadt.c
drivers/acpi/acpica/tbfind.c
drivers/acpi/acpica/tbinstal.c
drivers/acpi/acpica/tbutils.c
drivers/acpi/acpica/tbxface.c
drivers/acpi/acpica/tbxfroot.c
drivers/acpi/acpica/utalloc.c
drivers/acpi/acpica/utcopy.c
drivers/acpi/acpica/utdebug.c
drivers/acpi/acpica/utdelete.c
drivers/acpi/acpica/uteval.c
drivers/acpi/acpica/utglobal.c
drivers/acpi/acpica/utids.c
drivers/acpi/acpica/utinit.c
drivers/acpi/acpica/utlock.c
drivers/acpi/acpica/utmath.c
drivers/acpi/acpica/utmisc.c
drivers/acpi/acpica/utmutex.c
drivers/acpi/acpica/utobject.c
drivers/acpi/acpica/utresrc.c
drivers/acpi/acpica/utstate.c
drivers/acpi/acpica/utxface.c
drivers/acpi/battery.c
drivers/acpi/ec.c
drivers/acpi/glue.c
drivers/acpi/osl.c
drivers/acpi/power_meter.c
drivers/acpi/processor_idle.c
drivers/acpi/processor_throttling.c
drivers/acpi/utils.c
drivers/acpi/video.c
drivers/ata/Kconfig
drivers/ata/ahci.c
drivers/ata/ata_generic.c
drivers/ata/ata_piix.c
drivers/ata/libata-acpi.c
drivers/ata/libata-core.c
drivers/ata/libata-scsi.c
drivers/ata/libata-sff.c
drivers/ata/pata_acpi.c
drivers/ata/pata_ali.c
drivers/ata/pata_amd.c
drivers/ata/pata_artop.c
drivers/ata/pata_at91.c
drivers/ata/pata_atiixp.c
drivers/ata/pata_cmd640.c
drivers/ata/pata_cmd64x.c
drivers/ata/pata_cs5530.c
drivers/ata/pata_cs5535.c
drivers/ata/pata_cs5536.c
drivers/ata/pata_cypress.c
drivers/ata/pata_efar.c
drivers/ata/pata_hpt366.c
drivers/ata/pata_hpt37x.c
drivers/ata/pata_hpt3x2n.c
drivers/ata/pata_it8213.c
drivers/ata/pata_it821x.c
drivers/ata/pata_jmicron.c
drivers/ata/pata_marvell.c
drivers/ata/pata_netcell.c
drivers/ata/pata_ns87410.c
drivers/ata/pata_ns87415.c
drivers/ata/pata_oldpiix.c
drivers/ata/pata_opti.c
drivers/ata/pata_optidma.c
drivers/ata/pata_pcmcia.c
drivers/ata/pata_pdc202xx_old.c
drivers/ata/pata_piccolo.c
drivers/ata/pata_radisys.c
drivers/ata/pata_rz1000.c
drivers/ata/pata_sc1200.c
drivers/ata/pata_serverworks.c
drivers/ata/pata_sil680.c
drivers/ata/pata_sis.c
drivers/ata/pata_sl82c105.c
drivers/ata/pata_triflex.c
drivers/ata/pata_via.c
drivers/ata/sata_nv.c
drivers/ata/sata_via.c
drivers/block/DAC960.c
drivers/block/brd.c
drivers/block/cciss.c
drivers/block/cciss.h
drivers/block/cciss_cmd.h
drivers/block/cciss_scsi.c
drivers/block/cciss_scsi.h
drivers/block/cpqarray.c
drivers/block/drbd/drbd_nl.c
drivers/block/floppy.c
drivers/block/hd.c
drivers/block/mg_disk.c
drivers/block/paride/pd.c
drivers/block/paride/pf.c
drivers/block/pktcdvd.c
drivers/block/ps3disk.c
drivers/block/ps3vram.c
drivers/block/sunvdc.c
drivers/block/sx8.c
drivers/block/ub.c
drivers/block/viodasd.c
drivers/block/virtio_blk.c
drivers/block/xd.c
drivers/block/xen-blkfront.c
drivers/block/xsysace.c
drivers/cdrom/gdrom.c
drivers/cdrom/viocd.c
drivers/char/keyboard.c
drivers/char/nvram.c
drivers/clocksource/sh_cmt.c
drivers/firewire/sbp2.c
drivers/i2c/busses/i2c-pnx.c
drivers/ide/ide-acpi.c
drivers/ide/ide-disk.c
drivers/ide/ide-floppy.c
drivers/ide/ide-probe.c
drivers/ieee1394/sbp2.c
drivers/input/evdev.c
drivers/input/gameport/emu10k1-gp.c
drivers/input/gameport/fm801-gp.c
drivers/input/gameport/gameport.c
drivers/input/gameport/ns558.c
drivers/input/input-compat.h
drivers/input/input.c
drivers/input/joydev.c
drivers/input/joystick/Kconfig
drivers/input/joystick/gamecon.c
drivers/input/joystick/xpad.c
drivers/input/keyboard/Kconfig
drivers/input/keyboard/Makefile
drivers/input/keyboard/adp5588-keys.c
drivers/input/keyboard/atkbd.c
drivers/input/keyboard/ep93xx_keypad.c
drivers/input/keyboard/gpio_keys.c
drivers/input/keyboard/imx_keypad.c [new file with mode: 0644]
drivers/input/keyboard/qt2160.c
drivers/input/keyboard/sh_keysc.c
drivers/input/misc/apanel.c
drivers/input/misc/atlas_btns.c
drivers/input/misc/rotary_encoder.c
drivers/input/misc/uinput.c
drivers/input/misc/winbond-cir.c
drivers/input/mouse/hgpk.c
drivers/input/serio/pcips2.c
drivers/input/serio/serio.c
drivers/input/serio/xilinx_ps2.c
drivers/input/tablet/gtco.c
drivers/input/tablet/wacom.h
drivers/input/tablet/wacom_sys.c
drivers/input/tablet/wacom_wac.c
drivers/input/tablet/wacom_wac.h
drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/ads7846.c
drivers/input/touchscreen/elo.c
drivers/input/touchscreen/mainstone-wm97xx.c
drivers/input/touchscreen/s3c2410_ts.c
drivers/input/touchscreen/tsc2007.c
drivers/input/touchscreen/usbtouchscreen.c
drivers/input/touchscreen/zylonite-wm97xx.c
drivers/input/xen-kbdfront.c
drivers/macintosh/Kconfig
drivers/macintosh/mac_hid.c
drivers/md/linear.c
drivers/md/multipath.c
drivers/md/raid0.c
drivers/md/raid1.c
drivers/md/raid10.c
drivers/md/raid5.c
drivers/memstick/core/mspro_block.c
drivers/message/i2o/i2o_block.c
drivers/mfd/twl-core.c
drivers/mmc/card/queue.c
drivers/mmc/host/mmci.c
drivers/net/Kconfig
drivers/net/davinci_emac.c
drivers/pci/pci-acpi.c
drivers/pci/setup-bus.c
drivers/platform/x86/toshiba_bluetooth.c
drivers/platform/x86/wmi.c
drivers/rtc/rtc-pl031.c
drivers/s390/block/dasd.c
drivers/s390/char/tape_block.c
drivers/scsi/ibmvscsi/ibmvfc.c
drivers/scsi/ipr.c
drivers/scsi/pmcraid.c
drivers/scsi/scsi.c
drivers/scsi/scsi_lib.c
drivers/scsi/scsi_scan.c
drivers/scsi/sg.c
drivers/scsi/st.c
drivers/serial/amba-pl011.c
drivers/spi/amba-pl022.c
drivers/staging/hv/blkvsc_drv.c
drivers/staging/phison/phison.c
drivers/usb/gadget/f_audio.c
drivers/usb/gadget/gmidi.c
drivers/usb/storage/scsiglue.c
drivers/virtio/virtio_pci.c
drivers/watchdog/pnx4008_wdt.c
fs/bio.c
fs/partitions/check.c
include/acpi/acexcep.h
include/acpi/acnames.h
include/acpi/acoutput.h
include/acpi/acpi.h
include/acpi/acpi_bus.h
include/acpi/acpiosxf.h
include/acpi/acpixf.h
include/acpi/acrestyp.h
include/acpi/actbl.h
include/acpi/actbl1.h
include/acpi/actbl2.h
include/acpi/actypes.h
include/acpi/platform/acenv.h
include/acpi/platform/acgcc.h
include/acpi/platform/aclinux.h
include/acpi/processor.h
include/linux/Kbuild
include/linux/ata.h
include/linux/blkdev.h
include/linux/cciss_defs.h [new file with mode: 0644]
include/linux/cciss_ioctl.h
include/linux/clocksource.h
include/linux/davinci_emac.h [moved from arch/arm/mach-davinci/include/mach/emac.h with 83% similarity]
include/linux/gameport.h
include/linux/gpio_keys.h
include/linux/i2c-pnx.h
include/linux/i2c/twl.h
include/linux/i2o.h
include/linux/input.h
include/linux/input/sh_keysc.h
include/linux/iocontext.h
include/linux/irq.h
include/linux/kbd_kern.h
include/linux/libata.h
include/linux/pktcdvd.h
include/linux/sched.h
include/linux/serio.h
include/linux/timex.h
include/linux/usb/audio.h
include/sound/core.h
include/sound/cs46xx_dsp_spos.h
include/sound/pcm.h
include/sound/pcm_oss.h
include/sound/sb.h
include/sound/soc-dai.h
include/sound/soc-dapm.h
include/sound/soc.h
include/sound/tlv320dac33-plat.h
include/sound/tpa6130a2-plat.h
include/sound/version.h
include/sound/wm2000.h [new file with mode: 0644]
include/sound/wm8904.h [new file with mode: 0644]
include/sound/wm8955.h [new file with mode: 0644]
kernel/futex_compat.c
kernel/posix-timers.c
kernel/time/clocksource.c
kernel/time/ntp.c
kernel/time/timekeeping.c
kernel/trace/blktrace.c
mm/hugetlb.c
mm/memory.c
mm/migrate.c
sound/core/control.c
sound/core/misc.c
sound/core/oss/pcm_oss.c
sound/core/pcm.c
sound/core/pcm_lib.c
sound/core/pcm_memory.c
sound/core/pcm_native.c
sound/core/seq/seq_clientmgr.c
sound/core/seq/seq_timer.c
sound/drivers/dummy.c
sound/drivers/vx/vx_pcm.c
sound/isa/Kconfig
sound/isa/Makefile
sound/isa/als100.c
sound/isa/dt019x.c [deleted file]
sound/isa/opti9xx/opti92x-ad1848.c
sound/isa/sb/Makefile
sound/isa/sb/jazz16.c [new file with mode: 0644]
sound/isa/sb/sb8_main.c
sound/isa/sb/sb_common.c
sound/isa/sb/sb_mixer.c
sound/isa/wss/wss_lib.c
sound/mips/sgio2audio.c
sound/oss/kahlua.c
sound/oss/soundcard.c
sound/pci/Kconfig
sound/pci/ac97/ac97_patch.c
sound/pci/ad1889.c
sound/pci/ali5451/ali5451.c
sound/pci/als300.c
sound/pci/als4000.c
sound/pci/atiixp.c
sound/pci/atiixp_modem.c
sound/pci/au88x0/au8810.c
sound/pci/au88x0/au8820.c
sound/pci/au88x0/au8830.c
sound/pci/aw2/aw2-alsa.c
sound/pci/azt3328.c
sound/pci/bt87x.c
sound/pci/ca0106/ca0106_main.c
sound/pci/cmipci.c
sound/pci/cs4281.c
sound/pci/cs46xx/cs46xx.c
sound/pci/cs46xx/cs46xx_lib.c
sound/pci/cs46xx/dsp_spos.c
sound/pci/cs46xx/dsp_spos.h
sound/pci/cs46xx/dsp_spos_scb_lib.c
sound/pci/cs5530.c
sound/pci/cs5535audio/cs5535audio.c
sound/pci/ctxfi/ctatc.c
sound/pci/ctxfi/ctatc.h
sound/pci/ctxfi/xfi.c
sound/pci/echoaudio/darla20.c
sound/pci/echoaudio/darla20_dsp.c
sound/pci/echoaudio/darla24.c
sound/pci/echoaudio/darla24_dsp.c
sound/pci/echoaudio/echo3g.c
sound/pci/echoaudio/echo3g_dsp.c
sound/pci/echoaudio/echoaudio.c
sound/pci/echoaudio/echoaudio.h
sound/pci/echoaudio/echoaudio_3g.c
sound/pci/echoaudio/echoaudio_dsp.c
sound/pci/echoaudio/gina20.c
sound/pci/echoaudio/gina20_dsp.c
sound/pci/echoaudio/gina24.c
sound/pci/echoaudio/gina24_dsp.c
sound/pci/echoaudio/indigo.c
sound/pci/echoaudio/indigo_dsp.c
sound/pci/echoaudio/indigo_express_dsp.c
sound/pci/echoaudio/indigodj.c
sound/pci/echoaudio/indigodj_dsp.c
sound/pci/echoaudio/indigodjx.c
sound/pci/echoaudio/indigodjx_dsp.c
sound/pci/echoaudio/indigoio.c
sound/pci/echoaudio/indigoio_dsp.c
sound/pci/echoaudio/indigoiox.c
sound/pci/echoaudio/indigoiox_dsp.c
sound/pci/echoaudio/layla20.c
sound/pci/echoaudio/layla20_dsp.c
sound/pci/echoaudio/layla24.c
sound/pci/echoaudio/layla24_dsp.c
sound/pci/echoaudio/mia.c
sound/pci/echoaudio/mia_dsp.c
sound/pci/echoaudio/mona.c
sound/pci/echoaudio/mona_dsp.c
sound/pci/emu10k1/emu10k1.c
sound/pci/emu10k1/emu10k1x.c
sound/pci/ens1370.c
sound/pci/es1938.c
sound/pci/es1968.c
sound/pci/fm801.c
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_codec.h
sound/pci/hda/hda_generic.c
sound/pci/hda/hda_hwdep.c
sound/pci/hda/hda_intel.c
sound/pci/hda/hda_local.h
sound/pci/hda/hda_proc.c
sound/pci/hda/patch_analog.c
sound/pci/hda/patch_cirrus.c
sound/pci/hda/patch_cmedia.c
sound/pci/hda/patch_conexant.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_si3054.c
sound/pci/hda/patch_sigmatel.c
sound/pci/hda/patch_via.c
sound/pci/ice1712/ice1712.c
sound/pci/ice1712/ice1724.c
sound/pci/intel8x0.c
sound/pci/intel8x0m.c
sound/pci/korg1212/korg1212.c
sound/pci/lx6464es/lx6464es.c
sound/pci/maestro3.c
sound/pci/mixart/mixart.c
sound/pci/nm256/nm256.c
sound/pci/oxygen/Makefile
sound/pci/oxygen/hifier.c
sound/pci/oxygen/oxygen.c
sound/pci/oxygen/virtuoso.c
sound/pci/oxygen/wm8766.h [new file with mode: 0644]
sound/pci/oxygen/wm8776.h [new file with mode: 0644]
sound/pci/oxygen/xonar.h
sound/pci/oxygen/xonar_wm87x6.c [new file with mode: 0644]
sound/pci/pcxhr/pcxhr.c
sound/pci/riptide/riptide.c
sound/pci/rme32.c
sound/pci/rme96.c
sound/pci/rme9652/hdsp.c
sound/pci/rme9652/hdspm.c
sound/pci/rme9652/rme9652.c
sound/pci/sis7019.c
sound/pci/sonicvibes.c
sound/pci/trident/trident.c
sound/pci/via82xx.c
sound/pci/via82xx_modem.c
sound/pci/vx222/vx222.c
sound/pci/ymfpci/ymfpci.c
sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
sound/soc/blackfin/bf5xx-ac97-pcm.c
sound/soc/blackfin/bf5xx-i2s-pcm.c
sound/soc/blackfin/bf5xx-tdm-pcm.c
sound/soc/codecs/Kconfig
sound/soc/codecs/Makefile
sound/soc/codecs/ad1836.c
sound/soc/codecs/ad1836.h
sound/soc/codecs/ad1938.c
sound/soc/codecs/ak4104.c
sound/soc/codecs/cs4270.c
sound/soc/codecs/da7210.c [new file with mode: 0644]
sound/soc/codecs/da7210.h [new file with mode: 0644]
sound/soc/codecs/tlv320aic3x.c
sound/soc/codecs/tlv320dac33.c
sound/soc/codecs/tpa6130a2.c
sound/soc/codecs/twl4030.c
sound/soc/codecs/twl4030.h
sound/soc/codecs/wm2000.c [new file with mode: 0644]
sound/soc/codecs/wm2000.h [new file with mode: 0644]
sound/soc/codecs/wm8727.c
sound/soc/codecs/wm8731.c
sound/soc/codecs/wm8753.c
sound/soc/codecs/wm8776.c
sound/soc/codecs/wm8904.c [new file with mode: 0644]
sound/soc/codecs/wm8904.h [new file with mode: 0644]
sound/soc/codecs/wm8955.c [new file with mode: 0644]
sound/soc/codecs/wm8955.h [new file with mode: 0644]
sound/soc/codecs/wm8961.c
sound/soc/codecs/wm8974.c
sound/soc/codecs/wm8974.h
sound/soc/codecs/wm8978.c [new file with mode: 0644]
sound/soc/codecs/wm8978.h [new file with mode: 0644]
sound/soc/codecs/wm8990.c
sound/soc/codecs/wm8993.c
sound/soc/codecs/wm8994.c [new file with mode: 0644]
sound/soc/codecs/wm8994.h [new file with mode: 0644]
sound/soc/codecs/wm9713.c
sound/soc/codecs/wm_hubs.c
sound/soc/codecs/wm_hubs.h
sound/soc/davinci/davinci-mcasp.c
sound/soc/davinci/davinci-mcasp.h
sound/soc/davinci/davinci-pcm.c
sound/soc/imx/Kconfig
sound/soc/imx/Makefile
sound/soc/imx/imx-pcm-dma-mx2.c [new file with mode: 0644]
sound/soc/imx/imx-pcm-fiq.c [new file with mode: 0644]
sound/soc/imx/imx-ssi.c [new file with mode: 0644]
sound/soc/imx/imx-ssi.h [new file with mode: 0644]
sound/soc/imx/mx1_mx2-pcm.c [deleted file]
sound/soc/imx/mx1_mx2-pcm.h [deleted file]
sound/soc/imx/mx27vis_wm8974.c [deleted file]
sound/soc/imx/mxc-ssi.c [deleted file]
sound/soc/imx/mxc-ssi.h [deleted file]
sound/soc/imx/phycore-ac97.c [new file with mode: 0644]
sound/soc/omap/Kconfig
sound/soc/omap/Makefile
sound/soc/omap/mcpdm.c [new file with mode: 0644]
sound/soc/omap/mcpdm.h [new file with mode: 0644]
sound/soc/omap/omap-mcbsp.c
sound/soc/omap/omap-mcpdm.c [new file with mode: 0644]
sound/soc/omap/omap-mcpdm.h [new file with mode: 0644]
sound/soc/omap/omap-pcm.c
sound/soc/omap/omap-pcm.h
sound/soc/omap/omap3beagle.c
sound/soc/omap/omap3pandora.c
sound/soc/pxa/pxa-ssp.c
sound/soc/pxa/raumfeld.c
sound/soc/s3c24xx/Kconfig
sound/soc/s3c24xx/Makefile
sound/soc/s3c24xx/ln2440sbc_alc650.c
sound/soc/s3c24xx/s3c-ac97.c [new file with mode: 0644]
sound/soc/s3c24xx/s3c-ac97.h [new file with mode: 0644]
sound/soc/s3c24xx/s3c-pcm.c
sound/soc/s3c24xx/s3c2443-ac97.c [deleted file]
sound/soc/s3c24xx/s3c24xx-ac97.h [deleted file]
sound/soc/s3c24xx/s3c64xx-i2s.c
sound/soc/s3c24xx/smdk2443_wm9710.c
sound/soc/s3c24xx/smdk_wm9713.c [new file with mode: 0644]
sound/soc/sh/Kconfig
sound/soc/sh/Makefile
sound/soc/sh/fsi-da7210.c [new file with mode: 0644]
sound/soc/sh/fsi.c
sound/soc/sh/migor.c [new file with mode: 0644]
sound/soc/sh/siu.h [new file with mode: 0644]
sound/soc/sh/siu_dai.c [new file with mode: 0644]
sound/soc/sh/siu_pcm.c [new file with mode: 0644]
sound/soc/soc-cache.c
sound/soc/soc-core.c
sound/soc/soc-dapm.c
sound/usb/Kconfig
sound/usb/Makefile
sound/usb/ua101.c [new file with mode: 0644]
sound/usb/usbaudio.c
sound/usb/usbaudio.h
sound/usb/usbmidi.c
sound/usb/usbmixer.c
sound/usb/usbmixer_maps.c
sound/usb/usbquirks.h
sound/usb/usx2y/us122l.c

index d2f9033..4873c75 100644 (file)
@@ -128,3 +128,17 @@ Description:
                preferred request size for workloads where sustained
                throughput is desired.  If no optimal I/O size is
                reported this file contains 0.
+
+What:          /sys/block/<disk>/queue/nomerges
+Date:          January 2010
+Contact:
+Description:
+               Standard I/O elevator operations include attempts to
+               merge contiguous I/Os. For known random I/O loads these
+               attempts will always fail and result in extra cycles
+               being spent in the kernel. This allows one to turn off
+               this behavior on one of two ways: When set to 1, complex
+               merge checks are disabled, but the simple one-shot merges
+               with the previous I/O request are enabled. When set to 2,
+               all merge tries are disabled. The default value is 0 -
+               which enables all types of merge tries.
index 9d58c7c..eb0fae1 100644 (file)
@@ -59,7 +59,11 @@ PAGE_OFFSET  high_memory-1   Kernel direct-mapped RAM region.
                                This maps the platforms RAM, and typically
                                maps all platform RAM in a 1:1 relationship.
 
-TASK_SIZE      PAGE_OFFSET-1   Kernel module space
+PKMAP_BASE     PAGE_OFFSET-1   Permanent kernel mappings
+                               One way of mapping HIGHMEM pages into kernel
+                               space.
+
+MODULES_VADDR  MODULES_END-1   Kernel module space
                                Kernel modules inserted via insmod are
                                placed here using dynamic mappings.
 
index e164403..f652740 100644 (file)
@@ -25,11 +25,11 @@ size allowed by the hardware.
 
 nomerges (RW)
 -------------
-This enables the user to disable the lookup logic involved with IO merging
-requests in the block layer. Merging may still occur through a direct
-1-hit cache, since that comes for (almost) free. The IO scheduler will not
-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
-to 0, enabling all merges.
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
 
 nr_requests (RW)
 ----------------
index b231414..2b5f823 100644 (file)
@@ -88,12 +88,12 @@ changes occur:
        This is used primarily during fault processing.
 
 5) void update_mmu_cache(struct vm_area_struct *vma,
-                        unsigned long address, pte_t pte)
+                        unsigned long address, pte_t *ptep)
 
        At the end of every page fault, this routine is invoked to
        tell the architecture specific code that a translation
-       described by "pte" now exists at virtual address "address"
-       for address space "vma->vm_mm", in the software page tables.
+       now exists at virtual address "address" for address space
+       "vma->vm_mm", in the software page tables.
 
        A port may use this information in any way it so chooses.
        For example, it could use this event to pre-load TLB
index a0a4fd4..73ef30d 100644 (file)
@@ -520,6 +520,29 @@ Who:       Hans de Goede <hdegoede@redhat.com>
 
 ----------------------------
 
+What:  corgikbd, spitzkbd, tosakbd driver
+When:  2.6.35
+Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
+Why:   We now have a generic GPIO based matrix keyboard driver that
+       are fully capable of handling all the keys on these devices.
+       The original drivers manipulate the GPIO registers directly
+       and so are difficult to maintain.
+Who:   Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
+What:  corgi_ssp and corgi_ts driver
+When:  2.6.35
+Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c
+Why:   The corgi touchscreen is now deprecated in favour of the generic
+       ads7846.c driver. The noise reduction technique used in corgi_ts.c,
+       that's to wait till vsync before ADC sampling, is also integrated into
+       ads7846 driver now. Provided that the original driver is not generic
+       and is difficult to maintain, it will be removed later.
+Who:   Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
 What:  capifs
 When:  February 2011
 Files: drivers/isdn/capi/capifs.*
index f7160a2..b35affd 100644 (file)
@@ -1,5 +1,5 @@
-Copyright (C) 2002-2008 Sentelic Corporation.
-Last update: Oct-31-2008
+Copyright (C) 2002-2010 Sentelic Corporation.
+Last update: Jan-13-2010
 
 ==============================================================================
 * Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -44,7 +44,7 @@ B) MSID 6: Horizontal and Vertical scrolling.
 Packet 1
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
 BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
-  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|l|r|u|d|
+  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|r|l|u|d|
       |---------------|     |---------------|    |---------------|    |---------------|
 
 Byte 1: Bit7 => Y overflow
@@ -59,15 +59,15 @@ Byte 2: X Movement(9-bit 2's complement integers)
 Byte 3: Y Movement(9-bit 2's complement integers)
 Byte 4: Bit0 => the Vertical scrolling movement downward.
        Bit1 => the Vertical scrolling movement upward.
-       Bit2 => the Vertical scrolling movement rightward.
-       Bit3 => the Vertical scrolling movement leftward.
+       Bit2 => the Horizontal scrolling movement leftward.
+       Bit3 => the Horizontal scrolling movement rightward.
         Bit4 => 1 = 4th mouse button is pressed, Forward one page.
                 0 = 4th mouse button is not pressed.
         Bit5 => 1 = 5th mouse button is pressed, Backward one page.
                 0 = 5th mouse button is not pressed.
 
 C) MSID 7:
-# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
+# FSP uses 2 packets (8 Bytes) to represent Absolute Position.
   so we have PACKET NUMBER to identify packets.
   If PACKET NUMBER is 0, the packet is Packet 1.
   If PACKET NUMBER is 1, the packet is Packet 2.
@@ -129,7 +129,7 @@ Byte 3: Message Type => 0x00 (Disabled)
 Byte 4: Bit7~Bit0 => Don't Care
 
 ==============================================================================
-* Absolute position for STL3888-A0.
+* Absolute position for STL3888-Ax.
 ==============================================================================
 Packet 1 (ABSOLUTE POSITION)
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
@@ -179,14 +179,14 @@ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
         Bit5~Bit4 => y2_g
         Bit7~Bit6 => x2_g
 
-Notify Packet for STL3888-A0
+Notify Packet for STL3888-Ax
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
 BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
   1   |1|0|1|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|d|u|0|0|0|0|
       |---------------|     |---------------|    |---------------|    |---------------|
 
 Byte 1: Bit7~Bit6 => 00, Normal data packet
-                  => 01, Absolute coordination packet
+                  => 01, Absolute coordinates packet
                   => 10, Notify packet
         Bit5 => 1
         Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
@@ -205,15 +205,106 @@ Byte 4: Bit7 => scroll right button
         Bit6 => scroll left button
         Bit5 => scroll down button
         Bit4 => scroll up button
-            * Note that if gesture and additional button (Bit4~Bit7)
-             happen at the same time, the button information will not
-             be sent.
+            * Note that if gesture and additional buttoni (Bit4~Bit7)
+              happen at the same time, the button information will not
+              be sent.
+        Bit3~Bit0 => Reserved
+
+Sample sequence of Multi-finger, Multi-coordinate mode:
+
+       notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
+       abs pkt 2, ..., notify packet (valid bit == 0)
+
+==============================================================================
+* Absolute position for STL3888-B0.
+==============================================================================
+Packet 1(ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|F|1|0|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|u|d|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordinates packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => finger up/down information. 1: finger down, 0: finger up.
+        Bit3 => 1
+        Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit4 => scroll down button
+        Bit5 => scroll up button
+        Bit6 => scroll left button
+        Bit7 => scroll right button
+
+Packet 2 (ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|F|1|1|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|u|d|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => finger up/down information. 1: finger down, 0: finger up.
+        Bit3 => 1
+        Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit4 => scroll down button
+        Bit5 => scroll up button
+        Bit6 => scroll left button
+        Bit7 => scroll right button
+
+Notify Packet for STL3888-B0
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |1|0|1|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|u|d|0|0|0|0|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => 1
+        Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+                0: left button is generated by the on-pad command
+                1: left button is generated by the external button
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+Byte 3: Bit7~Bit6 => Don't care
+        Bit5~Bit4 => Number of fingers
+        Bit3~Bit1 => Reserved
+        Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+Byte 4: Bit7 => scroll right button
+        Bit6 => scroll left button
+        Bit5 => scroll up button
+        Bit4 => scroll down button
+            * Note that if gesture and additional button(Bit4~Bit7)
+              happen at the same time, the button information will not
+              be sent.
         Bit3~Bit0 => Reserved
 
 Sample sequence of Multi-finger, Multi-coordinate mode:
 
        notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
-       abs pkt 2, ..., notify packet(valid bit == 0)
+       abs pkt 2, ..., notify packet (valid bit == 0)
 
 ==============================================================================
 * FSP Enable/Disable packet
@@ -409,7 +500,8 @@ offset      width           default r/w     name
                                        0: read only, 1: read/write enable
        (Note that following registers does not require clock gating being
        enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
-       40 41 42 43.)
+       40 41 42 43.  In addition to that, this bit must be 1 when gesture
+       mode is enabled)
 
 0x31                           RW      on-pad command detection
        bit7            0       RW      on-pad command left button down tag
@@ -463,6 +555,10 @@ offset     width           default r/w     name
        absolute coordinates; otherwise, host only receives packets with
        relative coordinate.)
 
+       bit7            0       RW      EN_PS2_F2: PS/2 gesture mode 2nd
+                                       finger packet enable
+                                       0: disable, 1: enable
+
 0x43                           RW      on-pad control
        bit0            0       RW      on-pad control enable
                                        0: disable, 1: enable
index 8923597..33df82e 100644 (file)
@@ -482,6 +482,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     reference_rate     - reference sample rate, 44100 or 48000 (default)
     multiple           - multiple to ref. sample rate, 1 or 2 (default)
+    subsystem          - override the PCI SSID for probing; the value
+                         consists of SSVID << 16 | SSDID.  The default is
+                         zero, which means no override.
 
     This module supports multiple cards.
 
@@ -1123,6 +1126,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards, autoprobe and ISA PnP.
 
+  Module snd-jazz16
+  -------------------
+
+    Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+    MVD1216 + MVA416 + MVA514.
+
+    port       - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+    irq                - IRQ # for SB DSP chip (3,5,7,9,10,15)
+    dma8       - DMA # for SB DSP chip (1,3)
+    dma16      - DMA # for SB DSP chip (5,7)
+    mpu_port   - MPU-401 port # (0x300,0x310,0x320,0x330)
+    mpu_irq    - MPU-401 irq # (2,3,5,7)
+
+    This module supports multiple cards.
+
   Module snd-korg1212
   -------------------
 
@@ -1791,6 +1809,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-ua101
+  ----------------
+
+    Module for the Edirol UA-101 audio/MIDI interface.
+
+    This module supports multiple devices, autoprobe and hotplugging.
+
   Module snd-usb-audio
   --------------------
 
@@ -1923,7 +1948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
     (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
index e72cee9..1d38b0d 100644 (file)
@@ -124,6 +124,8 @@ ALC882/883/885/888/889
   asus-a7m     ASUS A7M
   macpro       MacPro support
   mb5          Macbook 5,1
+  macmini3     Macmini 3,1
+  mba21                Macbook Air 2,1
   mbp3         Macbook Pro rev3
   imac24       iMac 24'' with jack detection
   imac91       iMac 9,1
@@ -279,13 +281,16 @@ Conexant 5051
   laptop       Basic Laptop config (default)
   hp           HP Spartan laptop
   hp-dv6736    HP dv6736
+  hp-f700      HP Compaq Presario F700
   lenovo-x200  Lenovo X200 laptop
+  toshiba      Toshiba Satellite M300
 
 Conexant 5066
 =============
   laptop       Basic Laptop config (default)
   dell-laptop  Dell laptops
   olpc-xo-1_5  OLPC XO 1.5
+  ideapad       Lenovo IdeaPad U150
 
 STAC9200
 ========
index 6325bec..f4dd3bf 100644 (file)
@@ -452,6 +452,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs`
 sysfs entries, and the lines after `[hint]` are parsed as `hints`
 sysfs entries, respectively.
 
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [vendor_id]
+  0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [subsystem_id]
+  0xffff1111
+
+  [revision_id]
+  0x10
+
+  [chip_name]
+  My-own NEWS-0002
+------------------------------------------------------------------------
+
 The hd-audio driver reads the file via request_firmware().  Thus,
 a patch file has to be located on the appropriate firmware path,
 typically, /lib/firmware.  For example, when you pass the option
index 3f0c59f..71a2432 100644 (file)
@@ -329,7 +329,7 @@ extern pgd_t swapper_pg_dir[1024];
  * tables contain all the necessary information.
  */
 extern inline void update_mmu_cache(struct vm_area_struct * vma,
-       unsigned long address, pte_t pte)
+       unsigned long address, pte_t *ptep)
 {
 }
 
index 184a6bd..3b18128 100644 (file)
@@ -12,6 +12,7 @@ config ARM
        select HAVE_IDE
        select RTC_LIB
        select SYS_SUPPORTS_APM_EMULATION
+       select GENERIC_ATOMIC64 if (!CPU_32v6K)
        select HAVE_OPROFILE
        select HAVE_ARCH_KGDB
        select HAVE_KPROBES if (!XIP_KERNEL)
@@ -20,6 +21,8 @@ config ARM
        select HAVE_GENERIC_DMA_COHERENT
        select HAVE_KERNEL_GZIP
        select HAVE_KERNEL_LZO
+       select HAVE_PERF_EVENTS
+       select PERF_USE_VMALLOC
        help
          The ARM series is a line of low-power-consumption RISC chip designs
          licensed by ARM Ltd and targeted at embedded applications and
@@ -52,6 +55,9 @@ config HAVE_TCM
        bool
        select GENERIC_ALLOCATOR
 
+config HAVE_PROC_CPU
+       bool
+
 config NO_IOPORT
        bool
 
@@ -161,6 +167,11 @@ config ARCH_MTD_XIP
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
 
+config ARM_L1_CACHE_SHIFT_6
+       bool
+       help
+         Setting ARM L1 cache line size to 64 Bytes.
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -550,10 +561,20 @@ config ARCH_W90X900
          <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
                ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
+config ARCH_NUC93X
+       bool "Nuvoton NUC93X CPU"
+       select CPU_ARM926T
+       select HAVE_CLK
+       select COMMON_CLKDEV
+       help
+         Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+         low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
        select CPU_ARM926T
        select HAVE_CLK
+       select COMMON_CLKDEV
        help
          This enables support for Philips PNX4008 mobile platform.
 
@@ -638,6 +659,7 @@ config ARCH_S5PC1XX
        select GENERIC_GPIO
        select HAVE_CLK
        select CPU_V7
+       select ARM_L1_CACHE_SHIFT_6
        help
          Samsung S5PC1XX series based systems
 
@@ -785,6 +807,8 @@ source "arch/arm/plat-nomadik/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
 
+source "arch/arm/mach-nuc93x/Kconfig"
+
 source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
@@ -867,6 +891,11 @@ config XSCALE_PMU
        depends on CPU_XSCALE && !XSCALE_PMU_TIMER
        default y
 
+config CPU_HAS_PMU
+       depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+       default y
+       bool
+
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -921,6 +950,19 @@ config ARM_ERRATA_460075
          ACTLR register. Note that setting specific bits in the ACTLR register
          may not be available in non-secure mode.
 
+config PL310_ERRATA_588369
+       bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+       depends on CACHE_L2X0 && ARCH_OMAP4
+       help
+          The PL310 L2 cache controller implements three types of Clean &
+          Invalidate maintenance operations: by Physical Address
+          (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+          They are architecturally defined to behave as the execution of a
+          clean operation followed immediately by an invalidate operation,
+          both performing to the same memory location. This functionality
+          is not correctly implemented in PL310 as clean lines are not
+          invalidated as a result of these operations. Note that this errata
+          uses Texas Instrument's secure monitor api.
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1171,6 +1213,14 @@ config HIGHPTE
        depends on HIGHMEM
        depends on !OUTER_CACHE
 
+config HW_PERF_EVENTS
+       bool "Enable hardware performance counter support for perf events"
+       depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+       default y
+       help
+         Enable hardware performance counter support for perf events. If
+         disabled, perf events will use software events only.
+
 source "mm/Kconfig"
 
 config LEDS
@@ -1230,6 +1280,7 @@ config ALIGNMENT_TRAP
        bool
        depends on CPU_CP15_MMU
        default y if !ARCH_EBSA110
+       select HAVE_PROC_CPU if PROC_FS
        help
          ARM processors cannot fetch/store information which is not
          naturally aligned on the bus, i.e., a 4 byte fetch must start at an
index 356d702..81f54ca 100644 (file)
@@ -171,6 +171,7 @@ machine-$(CONFIG_ARCH_U300)         := u300
 machine-$(CONFIG_ARCH_U8500)           := ux500
 machine-$(CONFIG_ARCH_VERSATILE)       := versatile
 machine-$(CONFIG_ARCH_W90X900)         := w90x900
+machine-$(CONFIG_ARCH_NUC93X)          := nuc93x
 machine-$(CONFIG_FOOTBRIDGE)           := footbridge
 
 # Platform directory name.  This list is sorted alphanumerically
index 2d4d88b..97c89e7 100644 (file)
@@ -5,7 +5,7 @@
 #
 
 HEAD   = head.o
-OBJS   = misc.o
+OBJS   = misc.o decompress.o
 FONTC  = $(srctree)/drivers/video/console/font_acorn_8x8.c
 
 #
@@ -106,10 +106,6 @@ lib1funcs = $(obj)/lib1funcs.o
 $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
        $(call cmd,shipped)
 
-# Don't allow any static data in misc.o, which
-# would otherwise mess up our GOT table
-CFLAGS_misc.o := -Dstatic=
-
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
                $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
        $(call if_changed,ld)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
new file mode 100644 (file)
index 0000000..0da382f
--- /dev/null
@@ -0,0 +1,45 @@
+#define _LINUX_STRING_H_
+
+#include <linux/compiler.h>    /* for inline */
+#include <linux/types.h>       /* for size_t */
+#include <linux/stddef.h>      /* for NULL */
+#include <linux/linkage.h>
+#include <asm/string.h>
+
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+extern void error(char *);
+
+#define STATIC static
+
+#define ARCH_HAS_DECOMP_WDOG
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+{
+       decompress(input, len, NULL, NULL, output, NULL, error);
+}
index 4fddc50..99b75aa 100644 (file)
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #ifdef CONFIG_CPU_V6
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c0, c5, 0
                .endm
 #elif defined(CONFIG_CPU_V7)
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
 wait:          mrc     p14, 0, pc, c0, c1, 0
@@ -36,13 +36,13 @@ wait:               mrc     p14, 0, pc, c0, c1, 0
                mcr     p14, 0, \ch, c0, c5, 0
                .endm
 #elif defined(CONFIG_CPU_XSCALE)
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c8, c0, 0
                .endm
 #else
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c1, c0, 0
@@ -58,7 +58,7 @@ wait:         mrc     p14, 0, pc, c0, c1, 0
                .endm
 
 #if defined(CONFIG_ARCH_SA1100)
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                mov     \rb, #0x80000000        @ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
                add     \rb, \rb, #0x00050000   @ Ser3
@@ -67,13 +67,13 @@ wait:               mrc     p14, 0, pc, c0, c1, 0
 #endif
                .endm
 #elif defined(CONFIG_ARCH_S3C2410)
-               .macro loadsp, rb
+               .macro loadsp, rb, tmp
                mov     \rb, #0x50000000
                add     \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
                .endm
 #else
-               .macro  loadsp, rb
-               addruart \rb
+               .macro  loadsp, rb, tmp
+               addruart \rb, \tmp
                .endm
 #endif
 #endif
@@ -1025,7 +1025,7 @@ phex:             adr     r3, phexbuf
                strb    r2, [r3, r1]
                b       1b
 
-puts:          loadsp  r3
+puts:          loadsp  r3, r1
 1:             ldrb    r2, [r0], #1
                teq     r2, #0
                moveq   pc, lr
@@ -1042,7 +1042,7 @@ puts:             loadsp  r3
 putc:
                mov     r2, r0
                mov     r0, #0
-               loadsp  r3
+               loadsp  r3, r1
                b       2b
 
 memdump:       mov     r12, r0
index 56a0d11..d32bc71 100644 (file)
@@ -23,8 +23,8 @@ unsigned int __machine_arch_type;
 #include <linux/compiler.h>    /* for inline */
 #include <linux/types.h>       /* for size_t */
 #include <linux/stddef.h>      /* for NULL */
-#include <asm/string.h>
 #include <linux/linkage.h>
+#include <asm/string.h>
 
 #include <asm/unaligned.h>
 
@@ -117,57 +117,7 @@ static void putstr(const char *ptr)
 
 #endif
 
-#define __ptr_t void *
-
-#define memzero(s,n) __memzero(s,n)
-
-/*
- * Optimised C version of memzero for the ARM.
- */
-void __memzero (__ptr_t s, size_t n)
-{
-       union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
-       int i;
-
-       u.vp = s;
-
-       for (i = n >> 5; i > 0; i--) {
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-       }
-
-       if (n & 1 << 4) {
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-       }
-
-       if (n & 1 << 3) {
-               *u.ulp++ = 0;
-               *u.ulp++ = 0;
-       }
-
-       if (n & 1 << 2)
-               *u.ulp++ = 0;
-
-       if (n & 1 << 1) {
-               *u.ucp++ = 0;
-               *u.ucp++ = 0;
-       }
-
-       if (n & 1)
-               *u.ucp++ = 0;
-}
-
-static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
-                           size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
        int i = 0;
        unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
@@ -204,59 +154,20 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
 /*
  * gzip delarations
  */
-#define STATIC static
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static void error(char *m);
-
 extern char input_data[];
 extern char input_data_end[];
 
-static unsigned char *output_data;
-static unsigned long output_ptr;
-
-static void error(char *m);
+unsigned char *output_data;
+unsigned long output_ptr;
 
-static void putstr(const char *);
-
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef STANDALONE_DEBUG
-#define NO_INFLATE_MALLOC
-#endif
-
-#define ARCH_HAS_DECOMP_WDOG
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
 
 #ifndef arch_error
 #define arch_error(x)
 #endif
 
-static void error(char *x)
+void error(char *x)
 {
        arch_error(x);
 
@@ -272,6 +183,8 @@ asmlinkage void __div0(void)
        error("Attempting division by 0!");
 }
 
+extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
 #ifndef STANDALONE_DEBUG
 
 unsigned long
@@ -292,8 +205,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
        output_ptr = get_unaligned_le32(tmp);
 
        putstr("Uncompressing Linux...");
-       decompress(input_data, input_data_end - input_data,
-                       NULL, NULL, output_data, NULL, error);
+       do_decompress(input_data, input_data_end - input_data,
+                       output_data, error);
        putstr(" done, booting the kernel.\n");
        return output_ptr;
 }
index a5924b9..7ca9ecf 100644 (file)
@@ -14,6 +14,13 @@ SECTIONS
   /DISCARD/ : {
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    /*
+     * Discard any r/w data - this produces a link error if we have any,
+     * which is required for PIC decompression.  Local data generates
+     * GOTOFF relocations, which prevents it being relocated independently
+     * of the text/got segments.
+     */
+    *(.data)
   }
 
   . = TEXT_START;
@@ -40,7 +47,6 @@ SECTIONS
   .got                 : { *(.got) }
   _got_end = .;
   .got.plt             : { *(.got.plt) }
-  .data                        : { *(.data) }
   _edata = .;
 
   . = BSS_START;
index aae5bc0..446b696 100644 (file)
@@ -99,6 +99,16 @@ void clkdev_add(struct clk_lookup *cl)
 }
 EXPORT_SYMBOL(clkdev_add);
 
+void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
+{
+       mutex_lock(&clocks_mutex);
+       while (num--) {
+               list_add_tail(&cl->node, &clocks);
+               cl++;
+       }
+       mutex_unlock(&clocks_mutex);
+}
+
 #define MAX_DEV_ID     20
 #define MAX_CON_ID     16
 
index cc32c1e..cc0a932 100644 (file)
@@ -277,7 +277,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
                 * We don't need to sync the DMA buffer since
                 * it was allocated via the coherent allocators.
                 */
-               dma_cache_maint(ptr, size, dir);
+               __dma_single_cpu_to_dev(ptr, size, dir);
        }
 
        return dma_addr;
@@ -315,6 +315,8 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
                        __cpuc_flush_dcache_area(ptr, size);
                }
                free_safe_buffer(dev->archdata.dmabounce, buf);
+       } else {
+               __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
        }
 }
 
index f232941..1cf999a 100644 (file)
@@ -18,6 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-static void vic_ack_irq(unsigned int irq)
-{
-       void __iomem *base = get_irq_chip_data(irq);
-       irq &= 31;
-       writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-       /* moreover, clear the soft-triggered, in case it was the reason */
-       writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
-       void __iomem *base = get_irq_chip_data(irq);
-       irq &= 31;
-       writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
-       void __iomem *base = get_irq_chip_data(irq);
-       irq &= 31;
-       writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
-       int i;
-
-       for (i = 0; i < 16; i++) {
-               void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-               writel(VIC_VECT_CNTL_ENABLE | i, reg);
-       }
-
-       writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
 #if defined(CONFIG_PM)
 /**
  * struct vic_device - VIC PM device
@@ -99,13 +58,34 @@ struct vic_device {
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
+static int vic_id;
+
 static inline struct vic_device *to_vic(struct sys_device *sys)
 {
        return container_of(sys, struct vic_device, sysdev);
 }
+#endif /* CONFIG_PM */
 
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+       int i;
+
+       for (i = 0; i < 16; i++) {
+               void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+               writel(VIC_VECT_CNTL_ENABLE | i, reg);
+       }
+
+       writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
 
+#if defined(CONFIG_PM)
 static int vic_class_resume(struct sys_device *dev)
 {
        struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@ struct sysdev_class vic_class = {
 };
 
 /**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
-       struct vic_device *v;
-
-       if (vic_id >= ARRAY_SIZE(vic_devices))
-               printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-       else {
-               v = &vic_devices[vic_id];
-               v->base = base;
-               v->resume_sources = resume_sources;
-               v->irq = irq;
-               vic_id++;
-       }
-}
-
-/**
  * vic_pm_init - initicall to register VIC pm
  *
  * This is called via late_initcall() to register
@@ -219,9 +174,60 @@ static int __init vic_pm_init(void)
 
        return 0;
 }
-
 late_initcall(vic_pm_init);
 
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+       struct vic_device *v;
+
+       if (vic_id >= ARRAY_SIZE(vic_devices))
+               printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+       else {
+               v = &vic_devices[vic_id];
+               v->base = base;
+               v->resume_sources = resume_sources;
+               v->irq = irq;
+               vic_id++;
+       }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+       void __iomem *base = get_irq_chip_data(irq);
+       irq &= 31;
+       writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+       /* moreover, clear the soft-triggered, in case it was the reason */
+       writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+       void __iomem *base = get_irq_chip_data(irq);
+       irq &= 31;
+       writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+       void __iomem *base = get_irq_chip_data(irq);
+       irq &= 31;
+       writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
 static struct vic_device *vic_from_irq(unsigned int irq)
 {
         struct vic_device *v = vic_devices;
@@ -255,10 +261,7 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
 
        return 0;
 }
-
 #else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
 #define vic_set_wake NULL
 #endif /* CONFIG_PM */
 
@@ -270,9 +273,62 @@ static struct irq_chip vic_chip = {
        .set_wake = vic_set_wake,
 };
 
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
-                        u32 vic_sources);
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
+                               u32 vic_sources)
+{
+       unsigned int i;
+       int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+       /* Disable all interrupts initially. */
+
+       writel(0, base + VIC_INT_SELECT);
+       writel(0, base + VIC_INT_ENABLE);
+       writel(~0, base + VIC_INT_ENABLE_CLEAR);
+       writel(0, base + VIC_IRQ_STATUS);
+       writel(0, base + VIC_ITCR);
+       writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+       /*
+        * Make sure we clear all existing interrupts. The vector registers
+        * in this cell are after the second block of general registers,
+        * so we can address them using standard offsets, but only from
+        * the second base address, which is 0x20 in the page
+        */
+       if (vic_2nd_block) {
+               writel(0, base + VIC_PL190_VECT_ADDR);
+               for (i = 0; i < 19; i++) {
+                       unsigned int value;
+
+                       value = readl(base + VIC_PL190_VECT_ADDR);
+                       writel(value, base + VIC_PL190_VECT_ADDR);
+               }
+               /* ST has 16 vectors as well, but we don't enable them by now */
+               for (i = 0; i < 16; i++) {
+                       void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+                       writel(0, reg);
+               }
+
+               writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+       }
+
+       for (i = 0; i < 32; i++) {
+               if (vic_sources & (1 << i)) {
+                       unsigned int irq = irq_start + i;
+
+                       set_irq_chip(irq, &vic_chip);
+                       set_irq_chip_data(irq, base);
+                       set_irq_handler(irq, handle_level_irq);
+                       set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+               }
+       }
+}
 
 /**
  * vic_init - initialise a vectored interrupt controller
@@ -299,7 +355,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
        switch(vendor) {
        case AMBA_VENDOR_ST:
-               vik_init_st(base, irq_start, vic_sources);
+               vic_init_st(base, irq_start, vic_sources);
                return;
        default:
                printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
@@ -343,60 +399,3 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
        vic_pm_register(base, irq_start, resume_sources);
 }
-
-/*
- * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
- * The original cell has 32 interrupts, while the modified one has 64,
- * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
- * the probe function is called twice, with base set to offset 000
- *  and 020 within the page. We call this "second block".
- */
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
-                               u32 vic_sources)
-{
-       unsigned int i;
-       int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
-
-       /* Disable all interrupts initially. */
-
-       writel(0, base + VIC_INT_SELECT);
-       writel(0, base + VIC_INT_ENABLE);
-       writel(~0, base + VIC_INT_ENABLE_CLEAR);
-       writel(0, base + VIC_IRQ_STATUS);
-       writel(0, base + VIC_ITCR);
-       writel(~0, base + VIC_INT_SOFT_CLEAR);
-
-       /*
-        * Make sure we clear all existing interrupts. The vector registers
-        * in this cell are after the second block of general registers,
-        * so we can address them using standard offsets, but only from
-        * the second base address, which is 0x20 in the page
-        */
-       if (vic_2nd_block) {
-               writel(0, base + VIC_PL190_VECT_ADDR);
-               for (i = 0; i < 19; i++) {
-                       unsigned int value;
-
-                       value = readl(base + VIC_PL190_VECT_ADDR);
-                       writel(value, base + VIC_PL190_VECT_ADDR);
-               }
-               /* ST has 16 vectors as well, but we don't enable them by now */
-               for (i = 0; i < 16; i++) {
-                       void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-                       writel(0, reg);
-               }
-
-               writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-       }
-
-       for (i = 0; i < 32; i++) {
-               if (vic_sources & (1 << i)) {
-                       unsigned int irq = irq_start + i;
-
-                       set_irq_chip(irq, &vic_chip);
-                       set_irq_chip_data(irq, base);
-                       set_irq_handler(irq, handle_level_irq);
-                       set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-               }
-       }
-}
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
new file mode 100644 (file)
index 0000000..76d724b
--- /dev/null
@@ -0,0 +1,1640 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc7
+# Fri Dec  5 10:58:47 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+# CONFIG_TASK_DELAY_ACCT is not set
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT572D940HF Board Type
+#
+CONFIG_MACH_AT572D940HFEB=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_NUM_SERIAL=3
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+CONFIG_SPECIALIX=m
+CONFIG_RIO=m
+# CONFIG_RIO_OLDPCI is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=m
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_AT73C213 is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=m
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+CONFIG_RTC_DRV_DS1305=y
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+# CONFIG_UBIFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
index 3de640a..c48d7b8 100644 (file)
@@ -242,10 +242,13 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_PL310_ERRATA_588369=y
 CONFIG_ARM_GIC=y
 
 #
index d0daeab..e8ddec2 100644 (file)
@@ -235,6 +235,234 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()    smp_mb()
 #define smp_mb__after_atomic_inc()     smp_mb()
 
+#ifndef CONFIG_GENERIC_ATOMIC64
+typedef struct {
+       u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline u64 atomic64_read(atomic64_t *v)
+{
+       u64 result;
+
+       __asm__ __volatile__("@ atomic64_read\n"
+"      ldrexd  %0, %H0, [%1]"
+       : "=&r" (result)
+       : "r" (&v->counter)
+       );
+
+       return result;
+}
+
+static inline void atomic64_set(atomic64_t *v, u64 i)
+{
+       u64 tmp;
+
+       __asm__ __volatile__("@ atomic64_set\n"
+"1:    ldrexd  %0, %H0, [%1]\n"
+"      strexd  %0, %2, %H2, [%1]\n"
+"      teq     %0, #0\n"
+"      bne     1b"
+       : "=&r" (tmp)
+       : "r" (&v->counter), "r" (i)
+       : "cc");
+}
+
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+       u64 result;
+       unsigned long tmp;
+
+       __asm__ __volatile__("@ atomic64_add\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      adds    %0, %0, %3\n"
+"      adc     %H0, %H0, %H3\n"
+"      strexd  %1, %0, %H0, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&v->counter), "r" (i)
+       : "cc");
+}
+
+static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+{
+       u64 result;
+       unsigned long tmp;
+
+       smp_mb();
+
+       __asm__ __volatile__("@ atomic64_add_return\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      adds    %0, %0, %3\n"
+"      adc     %H0, %H0, %H3\n"
+"      strexd  %1, %0, %H0, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&v->counter), "r" (i)
+       : "cc");
+
+       smp_mb();
+
+       return result;
+}
+
+static inline void atomic64_sub(u64 i, atomic64_t *v)
+{
+       u64 result;
+       unsigned long tmp;
+
+       __asm__ __volatile__("@ atomic64_sub\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      subs    %0, %0, %3\n"
+"      sbc     %H0, %H0, %H3\n"
+"      strexd  %1, %0, %H0, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&v->counter), "r" (i)
+       : "cc");
+}
+
+static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+{
+       u64 result;
+       unsigned long tmp;
+
+       smp_mb();
+
+       __asm__ __volatile__("@ atomic64_sub_return\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      subs    %0, %0, %3\n"
+"      sbc     %H0, %H0, %H3\n"
+"      strexd  %1, %0, %H0, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&v->counter), "r" (i)
+       : "cc");
+
+       smp_mb();
+
+       return result;
+}
+
+static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+{
+       u64 oldval;
+       unsigned long res;
+
+       smp_mb();
+
+       do {
+               __asm__ __volatile__("@ atomic64_cmpxchg\n"
+               "ldrexd         %1, %H1, [%2]\n"
+               "mov            %0, #0\n"
+               "teq            %1, %3\n"
+               "teqeq          %H1, %H3\n"
+               "strexdeq       %0, %4, %H4, [%2]"
+               : "=&r" (res), "=&r" (oldval)
+               : "r" (&ptr->counter), "r" (old), "r" (new)
+               : "cc");
+       } while (res);
+
+       smp_mb();
+
+       return oldval;
+}
+
+static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+{
+       u64 result;
+       unsigned long tmp;
+
+       smp_mb();
+
+       __asm__ __volatile__("@ atomic64_xchg\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      strexd  %1, %3, %H3, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&ptr->counter), "r" (new)
+       : "cc");
+
+       smp_mb();
+
+       return result;
+}
+
+static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+{
+       u64 result;
+       unsigned long tmp;
+
+       smp_mb();
+
+       __asm__ __volatile__("@ atomic64_dec_if_positive\n"
+"1:    ldrexd  %0, %H0, [%2]\n"
+"      subs    %0, %0, #1\n"
+"      sbc     %H0, %H0, #0\n"
+"      teq     %H0, #0\n"
+"      bmi     2f\n"
+"      strexd  %1, %0, %H0, [%2]\n"
+"      teq     %1, #0\n"
+"      bne     1b\n"
+"2:"
+       : "=&r" (result), "=&r" (tmp)
+       : "r" (&v->counter)
+       : "cc");
+
+       smp_mb();
+
+       return result;
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+       u64 val;
+       unsigned long tmp;
+       int ret = 1;
+
+       smp_mb();
+
+       __asm__ __volatile__("@ atomic64_add_unless\n"
+"1:    ldrexd  %0, %H0, [%3]\n"
+"      teq     %0, %4\n"
+"      teqeq   %H0, %H4\n"
+"      moveq   %1, #0\n"
+"      beq     2f\n"
+"      adds    %0, %0, %5\n"
+"      adc     %H0, %H0, %H5\n"
+"      strexd  %2, %0, %H0, [%3]\n"
+"      teq     %2, #0\n"
+"      bne     1b\n"
+"2:"
+       : "=&r" (val), "=&r" (ret), "=&r" (tmp)
+       : "r" (&v->counter), "r" (u), "r" (a)
+       : "cc");
+
+       if (ret)
+               smp_mb();
+
+       return ret;
+}
+
+#define atomic64_add_negative(a, v)    (atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)                        atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)         atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v)       (atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)    (atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)                        atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)         atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)       (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v)       atomic64_add_unless((v), 1LL, 0LL)
+
+#else /* !CONFIG_GENERIC_ATOMIC64 */
+#include <asm-generic/atomic64.h>
+#endif
 #include <asm-generic/atomic-long.h>
 #endif
 #endif
index 5fe4a2a..72da7e0 100644 (file)
  *     DMA Cache Coherency
  *     ===================
  *
- *     dma_inv_range(start, end)
- *
- *             Invalidate (discard) the specified virtual address range.
- *             May not write back any entries.  If 'start' or 'end'
- *             are not cache line aligned, those lines must be written
- *             back.
- *             - start  - virtual start address
- *             - end    - virtual end address
- *
- *     dma_clean_range(start, end)
- *
- *             Clean (write back) the specified virtual address range.
- *             - start  - virtual start address
- *             - end    - virtual end address
- *
  *     dma_flush_range(start, end)
  *
  *             Clean and invalidate the specified virtual address range.
@@ -228,8 +213,9 @@ struct cpu_cache_fns {
        void (*coherent_user_range)(unsigned long, unsigned long);
        void (*flush_kern_dcache_area)(void *, size_t);
 
-       void (*dma_inv_range)(const void *, const void *);
-       void (*dma_clean_range)(const void *, const void *);
+       void (*dma_map_area)(const void *, size_t, int);
+       void (*dma_unmap_area)(const void *, size_t, int);
+
        void (*dma_flush_range)(const void *, const void *);
 };
 
@@ -259,8 +245,8 @@ extern struct cpu_cache_fns cpu_cache;
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_inv_range                 cpu_cache.dma_inv_range
-#define dmac_clean_range               cpu_cache.dma_clean_range
+#define dmac_map_area                  cpu_cache.dma_map_area
+#define dmac_unmap_area                cpu_cache.dma_unmap_area
 #define dmac_flush_range               cpu_cache.dma_flush_range
 
 #else
@@ -285,12 +271,12 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_inv_range                 __glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range               __glue(_CACHE,_dma_clean_range)
+#define dmac_map_area                  __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area                __glue(_CACHE,_dma_unmap_area)
 #define dmac_flush_range               __glue(_CACHE,_dma_flush_range)
 
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
 extern void dmac_flush_range(const void *, const void *);
 
 #endif
@@ -331,12 +317,8 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
  * processes address space.  Really, we want to allow our "user
  * space" model to handle this.
  */
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-       do {                                                    \
-               memcpy(dst, src, len);                          \
-               flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
-       } while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+       unsigned long, void *, const void *, unsigned long);
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
                memcpy(dst, src, len);                          \
@@ -370,17 +352,6 @@ vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
        }
 }
 
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-                        unsigned long uaddr, void *kaddr,
-                        unsigned long len, int write)
-{
-       if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-               unsigned long addr = (unsigned long)kaddr;
-               __cpuc_coherent_kern_range(addr, addr + len);
-       }
-}
-
 #ifndef CONFIG_CPU_CACHE_VIPT
 #define flush_cache_mm(mm) \
                vivt_flush_cache_mm(mm)
@@ -388,15 +359,10 @@ vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                vivt_flush_cache_range(vma,start,end)
 #define flush_cache_page(vma,addr,pfn) \
                vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
-               vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-                               unsigned long uaddr, void *kaddr,
-                               unsigned long len, int write);
 #endif
 
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
index b6ec7c6..7a0690d 100644 (file)
@@ -27,4 +27,7 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 void clkdev_add(struct clk_lookup *cl);
 void clkdev_drop(struct clk_lookup *cl);
 
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
 #endif
index a96300b..256ee1c 100644 (file)
@@ -57,18 +57,58 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 #endif
 
 /*
- * DMA-consistent mapping functions.  These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices.  This is the "generic" version.  The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership".  A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device.  These helper functions
+ * represent the transitions between these two ownership states.
  *
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches.  We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change.  Drivers must not use these.
  */
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
-                                size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+       enum dma_data_direction dir)
+{
+       extern void ___dma_single_cpu_to_dev(const void *, size_t,
+               enum dma_data_direction);
+
+       if (!arch_is_coherent())
+               ___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+       enum dma_data_direction dir)
+{
+       extern void ___dma_single_dev_to_cpu(const void *, size_t,
+               enum dma_data_direction);
+
+       if (!arch_is_coherent())
+               ___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+       size_t size, enum dma_data_direction dir)
+{
+       extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+               size_t, enum dma_data_direction);
+
+       if (!arch_is_coherent())
+               ___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+       size_t size, enum dma_data_direction dir)
+{
+       extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+               size_t, enum dma_data_direction);
+
+       if (!arch_is_coherent())
+               ___dma_page_dev_to_cpu(page, off, size, dir);
+}
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -304,8 +344,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 {
        BUG_ON(!valid_dma_direction(dir));
 
-       if (!arch_is_coherent())
-               dma_cache_maint(cpu_addr, size, dir);
+       __dma_single_cpu_to_dev(cpu_addr, size, dir);
 
        return virt_to_dma(dev, cpu_addr);
 }
@@ -329,8 +368,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 {
        BUG_ON(!valid_dma_direction(dir));
 
-       if (!arch_is_coherent())
-               dma_cache_maint_page(page, offset, size, dir);
+       __dma_page_cpu_to_dev(page, offset, size, dir);
 
        return page_to_dma(dev, page) + offset;
 }
@@ -352,7 +390,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
                size_t size, enum dma_data_direction dir)
 {
-       /* nothing to do */
+       __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
 }
 
 /**
@@ -372,7 +410,8 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
                size_t size, enum dma_data_direction dir)
 {
-       /* nothing to do */
+       __dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+               size, dir);
 }
 #endif /* CONFIG_DMABOUNCE */
 
@@ -400,7 +439,10 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 {
        BUG_ON(!valid_dma_direction(dir));
 
-       dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+       if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+               return;
+
+       __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
 }
 
 static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -412,8 +454,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
        if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
                return;
 
-       if (!arch_is_coherent())
-               dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+       __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
 }
 
 static inline void dma_sync_single_for_cpu(struct device *dev,
index d2a59cf..c980156 100644 (file)
@@ -69,9 +69,16 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 /*
  * __arm_ioremap takes CPU physical address.
  * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ * The _caller variety takes a __builtin_return_address(0) value for
+ * /proc/vmalloc to use - and should only be used in non-inline functions.
  */
-extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
+       size_t, unsigned int, void *);
+extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
+       void *);
+
+extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
 extern void __iounmap(volatile void __iomem *addr);
 
 /*
index b2cc1fc..8bffc3f 100644 (file)
@@ -46,12 +46,4 @@ struct sys_timer {
 extern struct sys_timer *system_timer;
 extern void timer_tick(void);
 
-/*
- * Kernel time keeping support.
- */
-struct timespec;
-extern int (*set_rtc)(void);
-extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
-extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
-
 #endif
index 5421d82..4312ee5 100644 (file)
  */
 #define IOREMAP_MAX_ORDER      24
 
+/*
+ * Size of DMA-consistent memory region.  Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE    SZ_2M
+#endif
+
+#define CONSISTENT_END         (0xffe00000UL)
+#define CONSISTENT_BASE                (CONSISTENT_END - CONSISTENT_DMA_SIZE)
+
 #else /* CONFIG_MMU */
 
 /*
 #endif
 
 #ifndef PHYS_OFFSET
-#define PHYS_OFFSET            (CONFIG_DRAM_BASE)
+#define PHYS_OFFSET            UL(CONFIG_DRAM_BASE)
 #endif
 
 #ifndef END_MEM
-#define END_MEM                (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#define END_MEM                (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
 #ifndef PAGE_OFFSET
 #endif /* !CONFIG_MMU */
 
 /*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
-/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
index b561584..68870c7 100644 (file)
@@ -6,6 +6,7 @@
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
        unsigned int id;
+       spinlock_t id_lock;
 #endif
        unsigned int kvm_seq;
 } mm_context_t;
index de6cefb..a0b3cac 100644 (file)
@@ -43,12 +43,23 @@ void __check_kvm_seq(struct mm_struct *mm);
 #define ASID_FIRST_VERSION     (1 << ASID_BITS)
 
 extern unsigned int cpu_last_asid;
+#ifdef CONFIG_SMP
+DECLARE_PER_CPU(struct mm_struct *, current_mm);
+#endif
 
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void __new_context(struct mm_struct *mm);
 
 static inline void check_context(struct mm_struct *mm)
 {
+       /*
+        * This code is executed with interrupts enabled. Therefore,
+        * mm->context.id cannot be updated to the latest ASID version
+        * on a different CPU (and condition below not triggered)
+        * without first getting an IPI to reset the context. The
+        * alternative is to take a read_lock on mm->context.id_lock
+        * (after changing its type to rwlock_t).
+        */
        if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
                __new_context(mm);
 
@@ -108,6 +119,10 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
                __flush_icache_all();
 #endif
        if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
+#ifdef CONFIG_SMP
+               struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
+               *crt_mm = next;
+#endif
                check_context(next);
                cpu_switch_mm(next->pgd, next);
                if (cache_is_vivt())
index 3a32af4..a485ac3 100644 (file)
 #endif
 
 struct page;
+struct vm_area_struct;
 
 struct cpu_user_fns {
        void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
        void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
-                       unsigned long vaddr);
+                       unsigned long vaddr, struct vm_area_struct *vma);
 };
 
 #ifdef MULTI_USER
@@ -137,7 +138,7 @@ extern struct cpu_user_fns cpu_user;
 
 extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
 extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
-                       unsigned long vaddr);
+                       unsigned long vaddr, struct vm_area_struct *vma);
 #endif
 
 #define clear_user_highpage(page,vaddr)                \
@@ -145,7 +146,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
 #define copy_user_highpage(to,from,vaddr,vma)  \
-       __cpu_copy_user_highpage(to, from, vaddr)
+       __cpu_copy_user_highpage(to, from, vaddr, vma)
 
 #define clear_page(page)       memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
new file mode 100644 (file)
index 0000000..49e3049
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ *  linux/arch/arm/include/asm/perf_event.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PERF_EVENT_H__
+#define __ARM_PERF_EVENT_H__
+
+/*
+ * NOP: on *most* (read: all supported) ARM platforms, the performance
+ * counter interrupts are regular interrupts and not an NMI. This
+ * means that when we receive the interrupt we can call
+ * perf_event_do_pending() that handles all of the work with
+ * interrupts enabled.
+ */
+static inline void
+set_perf_event_pending(void)
+{
+}
+
+/* ARM performance counters start from 1 (in the cp15 accesses) so use the
+ * same indexes here for consistency. */
+#define PERF_EVENT_INDEX_OFFSET 1
+
+#endif /* __ARM_PERF_EVENT_H__ */
index b011f2e..013cfcd 100644 (file)
@@ -86,8 +86,8 @@ extern unsigned int kobjsize(const void *objp);
  * All 32bit addresses are effectively valid for vmalloc...
  * Sort of meaningless for non-VM targets.
  */
-#define        VMALLOC_START   0
-#define        VMALLOC_END     0xffffffff
+#define        VMALLOC_START   0UL
+#define        VMALLOC_END     0xffffffffUL
 
 #define FIRST_USER_ADDRESS      (0)
 
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
new file mode 100644 (file)
index 0000000..2829b9f
--- /dev/null
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/include/asm/pmu.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PMU_H__
+#define __ARM_PMU_H__
+
+#ifdef CONFIG_CPU_HAS_PMU
+
+struct pmu_irqs {
+       const int   *irqs;
+       int         num_irqs;
+};
+
+/**
+ * reserve_pmu() - reserve the hardware performance counters
+ *
+ * Reserve the hardware performance counters in the system for exclusive use.
+ * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
+ * encoded error on failure.
+ */
+extern const struct pmu_irqs *
+reserve_pmu(void);
+
+/**
+ * release_pmu() - Relinquish control of the performance counters
+ *
+ * Release the performance counters and allow someone else to use them.
+ * Callers must have disabled the counters and released IRQs before calling
+ * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
+ * a cookie.
+ */
+extern int
+release_pmu(const struct pmu_irqs *irqs);
+
+/**
+ * init_pmu() - Initialise the PMU.
+ *
+ * Initialise the system ready for PMU enabling. This should typically set the
+ * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
+ * the actual hardware initialisation.
+ */
+extern int
+init_pmu(void);
+
+#else /* CONFIG_CPU_HAS_PMU */
+
+static inline const struct pmu_irqs *
+reserve_pmu(void)
+{
+       return ERR_PTR(-ENODEV);
+}
+
+static inline int
+release_pmu(const struct pmu_irqs *irqs)
+{
+       return -ENODEV;
+}
+
+static inline int
+init_pmu(void)
+{
+       return -ENODEV;
+}
+
+#endif /* CONFIG_CPU_HAS_PMU */
+
+#endif /* __ARM_PMU_H__ */
index 5ccce0a..f392fb4 100644 (file)
@@ -223,18 +223,6 @@ extern struct meminfo meminfo;
 #define bank_phys_end(bank)    ((bank)->start + (bank)->size)
 #define bank_phys_size(bank)   (bank)->size
 
-/*
- * Early command line parameters.
- */
-struct early_params {
-       const char *arg;
-       void (*fn)(char **p);
-};
-
-#define __early_param(name,fn)                                 \
-static struct early_params __early_##fn __used                 \
-__attribute__((__section__(".early_param.init"))) = { name, fn }
-
 #endif  /*  __KERNEL__  */
 
 #endif
index 59303e2..e621530 100644 (file)
@@ -13,4 +13,9 @@ static inline int tlb_ops_need_broadcast(void)
        return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
 }
 
+static inline int cache_ops_need_broadcast(void)
+{
+       return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
 #endif
index c91c64c..17eb355 100644 (file)
@@ -5,6 +5,22 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
+static inline void dsb_sev(void)
+{
+#if __LINUX_ARM_ARCH__ >= 7
+       __asm__ __volatile__ (
+               "dsb\n"
+               "sev"
+       );
+#elif defined(CONFIG_CPU_32v6K)
+       __asm__ __volatile__ (
+               "mcr p15, 0, %0, c7, c10, 4\n"
+               "sev"
+               : : "r" (0)
+       );
+#endif
+}
+
 /*
  * ARMv6 Spin-locking.
  *
@@ -69,13 +85,11 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 
        __asm__ __volatile__(
 "      str     %1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"      mcr     p15, 0, %1, c7, c10, 4\n" /* DSB */
-"      sev"
-#endif
        :
        : "r" (&lock->lock), "r" (0)
        : "cc");
+
+       dsb_sev();
 }
 
 /*
@@ -132,13 +146,11 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 
        __asm__ __volatile__(
        "str    %1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"      mcr     p15, 0, %1, c7, c10, 4\n" /* DSB */
-"      sev\n"
-#endif
        :
        : "r" (&rw->lock), "r" (0)
        : "cc");
+
+       dsb_sev();
 }
 
 /* write_can_lock - would write_trylock() succeed? */
@@ -188,14 +200,12 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 "      strex   %1, %0, [%2]\n"
 "      teq     %1, #0\n"
 "      bne     1b"
-#ifdef CONFIG_CPU_32v6K
-"\n    cmp     %0, #0\n"
-"      mcreq   p15, 0, %0, c7, c10, 4\n"
-"      seveq"
-#endif
        : "=&r" (tmp), "=&r" (tmp2)
        : "r" (&rw->lock)
        : "cc");
+
+       if (tmp == 0)
+               dsb_sev();
 }
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
index 058e7e9..ca88e6a 100644 (file)
@@ -73,8 +73,7 @@ extern unsigned int mem_fclk_21285;
 
 struct pt_regs;
 
-void die(const char *msg, struct pt_regs *regs, int err)
-               __attribute__((noreturn));
+void die(const char *msg, struct pt_regs *regs, int err);
 
 struct siginfo;
 void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
index 2dfb7d7..b74970e 100644 (file)
@@ -115,7 +115,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
-extern void vfp_sync_state(struct thread_info *thread);
+extern void vfp_sync_hwsta