V4L/DVB: saa5246a/saa5249: Remove obsolete teletext drivers
Hans Verkuil [Fri, 6 Aug 2010 14:08:54 +0000 (11:08 -0300)]
These old i2c teletext drivers are not supported by any hardware and cannot be
tested anymore.

Note that while the mxb board seemingly used the saa5246a driver, in reality
this teletext driver never worked.

These drivers are removed as part of the vtx feature removal, originally
scheduled for 2.6.35.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/Kconfig
drivers/media/video/Makefile
drivers/media/video/mxb.c
drivers/media/video/saa5246a.c [deleted file]
drivers/media/video/saa5249.c [deleted file]

index f6e4d04..2c0a8f7 100644 (file)
@@ -641,26 +641,6 @@ config VIDEO_CPIA_USB
 
 source "drivers/media/video/cpia2/Kconfig"
 
-config VIDEO_SAA5246A
-       tristate "SAA5246A, SAA5281 Teletext processor"
-       depends on I2C && VIDEO_V4L2
-       help
-         Support for I2C bus based teletext using the SAA5246A or SAA5281
-         chip. Useful only if you live in Europe.
-
-         To compile this driver as a module, choose M here: the
-         module will be called saa5246a.
-
-config VIDEO_SAA5249
-       tristate "SAA5249 Teletext processor"
-       depends on I2C && VIDEO_V4L2
-       help
-         Support for I2C bus based teletext using the SAA5249 chip. At the
-         moment this is only useful on some European WinTV cards.
-
-         To compile this driver as a module, choose M here: the
-         module will be called saa5249.
-
 config VIDEO_VINO
        tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
        depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
index 40f98fb..a8f8989 100644 (file)
@@ -33,8 +33,6 @@ obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
 obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
-obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o
-obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
 obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
 obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
index ef0c817..da07d14 100644 (file)
@@ -32,7 +32,6 @@
 #include "tea6415c.h"
 #include "tea6420.h"
 
-#define        I2C_SAA5246A  0x11
 #define I2C_SAA7111A  0x24
 #define        I2C_TDA9840   0x42
 #define        I2C_TEA6415C  0x43
@@ -197,10 +196,6 @@ static int mxb_probe(struct saa7146_dev *dev)
                        "tda9840", "tda9840", I2C_TDA9840, NULL);
        mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
                        "tuner", "tuner", I2C_TUNER, NULL);
-       if (v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-                       "saa5246a", "saa5246a", I2C_SAA5246A, NULL)) {
-               printk(KERN_INFO "mxb: found teletext decoder\n");
-       }
 
        /* check if all devices are present */
        if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
deleted file mode 100644 (file)
index 6b3b09e..0000000
+++ /dev/null
@@ -1,1123 +0,0 @@
-/*
- * Driver for the SAA5246A or SAA5281 Teletext (=Videotext) decoder chips from
- * Philips.
- *
- * Only capturing of Teletext pages is tested. The videotext chips also have a
- * TV output but my hardware doesn't use it. For this reason this driver does
- * not support changing any TV display settings.
- *
- * Copyright (C) 2004 Michael Geng <linux@MichaelGeng.de>
- *
- * Derived from
- *
- * saa5249 driver
- * Copyright (C) 1998 Richard Guenther
- * <richard.guenther@student.uni-tuebingen.de>
- *
- * with changes by
- * Alan Cox <alan@lxorguk.ukuu.org.uk>
- *
- * and
- *
- * vtx.c
- * Copyright (C) 1994-97 Martin Buck  <martin-2.buck@student.uni-ulm.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/videotext.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-i2c-drv.h>
-
-MODULE_AUTHOR("Michael Geng <linux@MichaelGeng.de>");
-MODULE_DESCRIPTION("Philips SAA5246A, SAA5281 Teletext decoder driver");
-MODULE_LICENSE("GPL");
-
-#define MAJOR_VERSION 1                /* driver major version number */
-#define MINOR_VERSION 8                /* driver minor version number */
-
-/* Number of DAUs = number of pages that can be searched at the same time. */
-#define NUM_DAUS 4
-
-#define NUM_ROWS_PER_PAGE 40
-
-/* first column is 0 (not 1) */
-#define POS_TIME_START 32
-#define POS_TIME_END 39
-
-#define POS_HEADER_START 7
-#define POS_HEADER_END 31
-
-/* Returns 'true' if the part of the videotext page described with req contains
-   (at least parts of) the time field */
-#define REQ_CONTAINS_TIME(p_req) \
-       ((p_req)->start <= POS_TIME_END && \
-        (p_req)->end   >= POS_TIME_START)
-
-/* Returns 'true' if the part of the videotext page described with req contains
-   (at least parts of) the page header */
-#define REQ_CONTAINS_HEADER(p_req) \
-       ((p_req)->start <= POS_HEADER_END && \
-        (p_req)->end   >= POS_HEADER_START)
-
-/*****************************************************************************/
-/* Mode register numbers of the SAA5246A                                    */
-/*****************************************************************************/
-#define SAA5246A_REGISTER_R0    0
-#define SAA5246A_REGISTER_R1    1
-#define SAA5246A_REGISTER_R2    2
-#define SAA5246A_REGISTER_R3    3
-#define SAA5246A_REGISTER_R4    4
-#define SAA5246A_REGISTER_R5    5
-#define SAA5246A_REGISTER_R6    6
-#define SAA5246A_REGISTER_R7    7
-#define SAA5246A_REGISTER_R8    8
-#define SAA5246A_REGISTER_R9    9
-#define SAA5246A_REGISTER_R10  10
-#define SAA5246A_REGISTER_R11  11
-#define SAA5246A_REGISTER_R11B 11
-
-/* SAA5246A mode registers often autoincrement to the next register.
-   Therefore we use variable argument lists. The following macro indicates
-   the end of a command list. */
-#define COMMAND_END (-1)
-
-/*****************************************************************************/
-/* Contents of the mode registers of the SAA5246A                           */
-/*****************************************************************************/
-/* Register R0 (Advanced Control) */
-#define R0_SELECT_R11                                     0x00
-#define R0_SELECT_R11B                                    0x01
-
-#define R0_PLL_TIME_CONSTANT_LONG                         0x00
-#define R0_PLL_TIME_CONSTANT_SHORT                        0x02
-
-#define R0_ENABLE_nODD_EVEN_OUTPUT                        0x00
-#define R0_DISABLE_nODD_EVEN_OUTPUT                       0x04
-
-#define R0_ENABLE_HDR_POLL                                0x00
-#define R0_DISABLE_HDR_POLL                               0x10
-
-#define R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x00
-#define R0_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED       0x20
-
-#define R0_NO_FREE_RUN_PLL                                0x00
-#define R0_FREE_RUN_PLL                                           0x40
-
-#define R0_NO_AUTOMATIC_FASTEXT_PROMPT                    0x00
-#define R0_AUTOMATIC_FASTEXT_PROMPT                       0x80
-
-/* Register R1 (Mode) */
-#define R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES     0x00
-#define R1_NON_INTERLACED_312_313_LINES                           0x01
-#define R1_NON_INTERLACED_312_312_LINES                           0x02
-#define R1_FFB_LEADING_EDGE_IN_FIRST_BROAD_PULSE          0x03
-#define R1_FFB_LEADING_EDGE_IN_SECOND_BROAD_PULSE         0x07
-
-#define R1_DEW                                            0x00
-#define R1_FULL_FIELD                                     0x08
-
-#define R1_EXTENDED_PACKET_DISABLE                        0x00
-#define R1_EXTENDED_PACKET_ENABLE                         0x10
-
-#define R1_DAUS_ALL_ON                                    0x00
-#define R1_DAUS_ALL_OFF                                           0x20
-
-#define R1_7_BITS_PLUS_PARITY                             0x00
-#define R1_8_BITS_NO_PARITY                               0x40
-
-#define R1_VCS_TO_SCS                                     0x00
-#define R1_NO_VCS_TO_SCS                                  0x80
-
-/* Register R2 (Page request address) */
-#define R2_IN_R3_SELECT_PAGE_HUNDREDS                     0x00
-#define R2_IN_R3_SELECT_PAGE_TENS                         0x01
-#define R2_IN_R3_SELECT_PAGE_UNITS                        0x02
-#define R2_IN_R3_SELECT_HOURS_TENS                        0x03
-#define R2_IN_R3_SELECT_HOURS_UNITS                       0x04
-#define R2_IN_R3_SELECT_MINUTES_TENS                      0x05
-#define R2_IN_R3_SELECT_MINUTES_UNITS                     0x06
-
-#define R2_DAU_0                                          0x00
-#define R2_DAU_1                                          0x10
-#define R2_DAU_2                                          0x20
-#define R2_DAU_3                                          0x30
-
-#define R2_BANK_0                                         0x00
-#define R2_BANK 1                                         0x40
-
-#define R2_HAMMING_CHECK_ON                               0x80
-#define R2_HAMMING_CHECK_OFF                              0x00
-
-/* Register R3 (Page request data) */
-#define R3_PAGE_HUNDREDS_0                                0x00
-#define R3_PAGE_HUNDREDS_1                                0x01
-#define R3_PAGE_HUNDREDS_2                                0x02
-#define R3_PAGE_HUNDREDS_3                                0x03
-#define R3_PAGE_HUNDREDS_4                                0x04
-#define R3_PAGE_HUNDREDS_5                                0x05
-#define R3_PAGE_HUNDREDS_6                                0x06
-#define R3_PAGE_HUNDREDS_7                                0x07
-
-#define R3_HOLD_PAGE                                      0x00
-#define R3_UPDATE_PAGE                                    0x08
-
-#define R3_PAGE_HUNDREDS_DO_NOT_CARE                      0x00
-#define R3_PAGE_HUNDREDS_DO_CARE                          0x10
-
-#define R3_PAGE_TENS_DO_NOT_CARE                          0x00
-#define R3_PAGE_TENS_DO_CARE                              0x10
-
-#define R3_PAGE_UNITS_DO_NOT_CARE                         0x00
-#define R3_PAGE_UNITS_DO_CARE                             0x10
-
-#define R3_HOURS_TENS_DO_NOT_CARE                         0x00
-#define R3_HOURS_TENS_DO_CARE                             0x10
-
-#define R3_HOURS_UNITS_DO_NOT_CARE                        0x00
-#define R3_HOURS_UNITS_DO_CARE                            0x10
-
-#define R3_MINUTES_TENS_DO_NOT_CARE                       0x00
-#define R3_MINUTES_TENS_DO_CARE                                   0x10
-
-#define R3_MINUTES_UNITS_DO_NOT_CARE                      0x00
-#define R3_MINUTES_UNITS_DO_CARE                          0x10
-
-/* Register R4 (Display chapter) */
-#define R4_DISPLAY_PAGE_0                                 0x00
-#define R4_DISPLAY_PAGE_1                                 0x01
-#define R4_DISPLAY_PAGE_2                                 0x02
-#define R4_DISPLAY_PAGE_3                                 0x03
-#define R4_DISPLAY_PAGE_4                                 0x04
-#define R4_DISPLAY_PAGE_5                                 0x05
-#define R4_DISPLAY_PAGE_6                                 0x06
-#define R4_DISPLAY_PAGE_7                                 0x07
-
-/* Register R5 (Normal display control) */
-#define R5_PICTURE_INSIDE_BOXING_OFF                      0x00
-#define R5_PICTURE_INSIDE_BOXING_ON                       0x01
-
-#define R5_PICTURE_OUTSIDE_BOXING_OFF                     0x00
-#define R5_PICTURE_OUTSIDE_BOXING_ON                      0x02
-
-#define R5_TEXT_INSIDE_BOXING_OFF                         0x00
-#define R5_TEXT_INSIDE_BOXING_ON                          0x04
-
-#define R5_TEXT_OUTSIDE_BOXING_OFF                        0x00
-#define R5_TEXT_OUTSIDE_BOXING_ON                         0x08
-
-#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_OFF                   0x00
-#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_ON            0x10
-
-#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF          0x00
-#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON                   0x20
-
-#define R5_BACKGROUND_COLOR_INSIDE_BOXING_OFF             0x00
-#define R5_BACKGROUND_COLOR_INSIDE_BOXING_ON              0x40
-
-#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF            0x00
-#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_ON             0x80
-
-/* Register R6 (Newsflash display) */
-#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_OFF            0x00
-#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_ON             0x01
-
-#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_OFF                   0x00
-#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_ON            0x02
-
-#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_OFF               0x00
-#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_ON                0x04
-
-#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_OFF              0x00
-#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_ON               0x08
-
-#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_OFF  0x00
-#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_ON   0x10
-
-#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00
-#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON  0x20
-
-#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_OFF    0x00
-#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_ON    0x40
-
-#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF   0x00
-#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_ON    0x80
-
-/* Register R7 (Display mode) */
-#define R7_BOX_OFF_ROW_0                                  0x00
-#define R7_BOX_ON_ROW_0                                           0x01
-
-#define R7_BOX_OFF_ROW_1_TO_23                            0x00
-#define R7_BOX_ON_ROW_1_TO_23                             0x02
-
-#define R7_BOX_OFF_ROW_24                                 0x00
-#define R7_BOX_ON_ROW_24                                  0x04
-
-#define R7_SINGLE_HEIGHT                                  0x00
-#define R7_DOUBLE_HEIGHT                                  0x08
-
-#define R7_TOP_HALF                                       0x00
-#define R7_BOTTOM_HALF                                    0x10
-
-#define R7_REVEAL_OFF                                     0x00
-#define R7_REVEAL_ON                                      0x20
-
-#define R7_CURSER_OFF                                     0x00
-#define R7_CURSER_ON                                      0x40
-
-#define R7_STATUS_BOTTOM                                  0x00
-#define R7_STATUS_TOP                                     0x80
-
-/* Register R8 (Active chapter) */
-#define R8_ACTIVE_CHAPTER_0                               0x00
-#define R8_ACTIVE_CHAPTER_1                               0x01
-#define R8_ACTIVE_CHAPTER_2                               0x02
-#define R8_ACTIVE_CHAPTER_3                               0x03
-#define R8_ACTIVE_CHAPTER_4                               0x04
-#define R8_ACTIVE_CHAPTER_5                               0x05
-#define R8_ACTIVE_CHAPTER_6                               0x06
-#define R8_ACTIVE_CHAPTER_7                               0x07
-
-#define R8_CLEAR_MEMORY                                           0x08
-#define R8_DO_NOT_CLEAR_MEMORY                            0x00
-
-/* Register R9 (Curser row) */
-#define R9_CURSER_ROW_0                                           0x00
-#define R9_CURSER_ROW_1                                           0x01
-#define R9_CURSER_ROW_2                                           0x02
-#define R9_CURSER_ROW_25                                  0x19
-
-/* Register R10 (Curser column) */
-#define R10_CURSER_COLUMN_0                               0x00
-#define R10_CURSER_COLUMN_6                               0x06
-#define R10_CURSER_COLUMN_8                               0x08
-
-/*****************************************************************************/
-/* Row 25 control data in column 0 to 9                                             */
-/*****************************************************************************/
-#define ROW25_COLUMN0_PAGE_UNITS                          0x0F
-
-#define ROW25_COLUMN1_PAGE_TENS                                   0x0F
-
-#define ROW25_COLUMN2_MINUTES_UNITS                       0x0F
-
-#define ROW25_COLUMN3_MINUTES_TENS                        0x07
-#define ROW25_COLUMN3_DELETE_PAGE                         0x08
-
-#define ROW25_COLUMN4_HOUR_UNITS                          0x0F
-
-#define ROW25_COLUMN5_HOUR_TENS                                   0x03
-#define ROW25_COLUMN5_INSERT_HEADLINE                     0x04
-#define ROW25_COLUMN5_INSERT_SUBTITLE                     0x08
-
-#define ROW25_COLUMN6_SUPPRESS_HEADER                     0x01
-#define ROW25_COLUMN6_UPDATE_PAGE                         0x02
-#define ROW25_COLUMN6_INTERRUPTED_SEQUENCE                0x04
-#define ROW25_COLUMN6_SUPPRESS_DISPLAY                    0x08
-
-#define ROW25_COLUMN7_SERIAL_MODE                         0x01
-#define ROW25_COLUMN7_CHARACTER_SET                       0x0E
-
-#define ROW25_COLUMN8_PAGE_HUNDREDS                       0x07
-#define ROW25_COLUMN8_PAGE_NOT_FOUND                      0x10
-
-#define ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR               0x20
-
-#define ROW25_COLUMN0_TO_7_HAMMING_ERROR                  0x10
-
-/*****************************************************************************/
-/* Helper macros for extracting page, hour and minute digits                */
-/*****************************************************************************/
-/* BYTE_POS  0 is at row 0, column 0,
-   BYTE_POS  1 is at row 0, column 1,
-   BYTE_POS 40 is at row 1, column 0, (with NUM_ROWS_PER_PAGE = 40)
-   BYTE_POS 41 is at row 1, column 1, (with NUM_ROWS_PER_PAGE = 40),
-   ... */
-#define ROW(BYTE_POS)    (BYTE_POS / NUM_ROWS_PER_PAGE)
-#define COLUMN(BYTE_POS) (BYTE_POS % NUM_ROWS_PER_PAGE)
-
-/*****************************************************************************/
-/* Helper macros for extracting page, hour and minute digits                */
-/*****************************************************************************/
-/* Macros for extracting hundreds, tens and units of a page number which
-   must be in the range 0 ... 0x799.
-   Note that page is coded in hexadecimal, i.e. 0x123 means page 123.
-   page 0x.. means page 8.. */
-#define HUNDREDS_OF_PAGE(page) (((page) / 0x100) & 0x7)
-#define TENS_OF_PAGE(page)     (((page) / 0x10)  & 0xF)
-#define UNITS_OF_PAGE(page)     ((page) & 0xF)
-
-/* Macros for extracting tens and units of a hour information which
-   must be in the range 0 ... 0x24.
-   Note that hour is coded in hexadecimal, i.e. 0x12 means 12 hours */
-#define TENS_OF_HOUR(hour)  ((hour) / 0x10)
-#define UNITS_OF_HOUR(hour) ((hour) & 0xF)
-
-/* Macros for extracting tens and units of a minute information which
-   must be in the range 0 ... 0x59.
-   Note that minute is coded in hexadecimal, i.e. 0x12 means 12 minutes */
-#define TENS_OF_MINUTE(minute)  ((minute) / 0x10)
-#define UNITS_OF_MINUTE(minute) ((minute) & 0xF)
-
-#define HOUR_MAX   0x23
-#define MINUTE_MAX 0x59
-#define PAGE_MAX   0x8FF
-
-
-struct saa5246a_device
-{
-       struct v4l2_subdev sd;
-       struct video_device *vdev;
-       u8     pgbuf[NUM_DAUS][VTX_VIRTUALSIZE];
-       int    is_searching[NUM_DAUS];
-       unsigned long in_use;
-       struct mutex lock;
-};
-
-static inline struct saa5246a_device *to_dev(struct v4l2_subdev *sd)
-{
-       return container_of(sd, struct saa5246a_device, sd);
-}
-
-static struct video_device saa_template;       /* Declared near bottom */
-
-/*
- *     I2C interfaces
- */
-
-static int i2c_sendbuf(struct saa5246a_device *t, int reg, int count, u8 *data)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
-       char buf[64];
-
-       buf[0] = reg;
-       memcpy(buf+1, data, count);
-
-       if (i2c_master_send(client, buf, count + 1) == count + 1)
-               return 0;
-       return -1;
-}
-
-static int i2c_senddata(struct saa5246a_device *t, ...)
-{
-       unsigned char buf[64];
-       int v;
-       int ct = 0;
-       va_list argp;
-       va_start(argp, t);
-
-       while ((v = va_arg(argp, int)) != -1)
-               buf[ct++] = v;
-
-       va_end(argp);
-       return i2c_sendbuf(t, buf[0], ct-1, buf+1);
-}
-
-/* Get count number of bytes from I²C-device at address adr, store them in buf.
- * Start & stop handshaking is done by this routine, ack will be sent after the
- * last byte to inhibit further sending of data. If uaccess is 'true', data is
- * written to user-space with put_user. Returns -1 if I²C-device didn't send
- * acknowledge, 0 otherwise
- */
-static int i2c_getdata(struct saa5246a_device *t, int count, u8 *buf)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
-
-       if (i2c_master_recv(client, buf, count) != count)
-               return -1;
-       return 0;
-}
-
-/* When a page is found then the not FOUND bit in one of the status registers
- * of the SAA5264A chip is cleared. Unfortunately this bit is not set
- * automatically when a new page is requested. Instead this function must be
- * called after a page has been requested.
- *
- * Return value: 0 if successful
- */
-static int saa5246a_clear_found_bit(struct saa5246a_device *t,
-       unsigned char dau_no)
-{
-       unsigned char row_25_column_8;
-
-       if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-
-               dau_no |
-               R8_DO_NOT_CLEAR_MEMORY,
-
-               R9_CURSER_ROW_25,
-
-               R10_CURSER_COLUMN_8,
-
-               COMMAND_END) ||
-               i2c_getdata(t, 1, &row_25_column_8))
-       {
-               return -EIO;
-       }
-       row_25_column_8 |= ROW25_COLUMN8_PAGE_NOT_FOUND;
-       if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-
-               dau_no |
-               R8_DO_NOT_CLEAR_MEMORY,
-
-               R9_CURSER_ROW_25,
-
-               R10_CURSER_COLUMN_8,
-
-               row_25_column_8,
-
-               COMMAND_END))
-       {
-               return -EIO;
-       }
-
-       return 0;
-}
-
-/* Requests one videotext page as described in req. The fields of req are
- * checked and an error is returned if something is invalid.
- *
- * Return value: 0 if successful
- */
-static int saa5246a_request_page(struct saa5246a_device *t,
-    vtx_pagereq_t *req)
-{
-       if (req->pagemask < 0 || req->pagemask >= PGMASK_MAX)
-               return -EINVAL;
-       if (req->pagemask & PGMASK_PAGE)
-               if (req->page < 0 || req->page > PAGE_MAX)
-                       return -EINVAL;
-       if (req->pagemask & PGMASK_HOUR)
-               if (req->hour < 0 || req->hour > HOUR_MAX)
-                       return -EINVAL;
-       if (req->pagemask & PGMASK_MINUTE)
-               if (req->minute < 0 || req->minute > MINUTE_MAX)
-                       return -EINVAL;
-       if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-               return -EINVAL;
-
-       if (i2c_senddata(t, SAA5246A_REGISTER_R2,
-
-               R2_IN_R3_SELECT_PAGE_HUNDREDS |
-               req->pgbuf << 4 |
-               R2_BANK_0 |
-               R2_HAMMING_CHECK_OFF,
-
-               HUNDREDS_OF_PAGE(req->page) |
-               R3_HOLD_PAGE |
-               (req->pagemask & PG_HUND ?
-                       R3_PAGE_HUNDREDS_DO_CARE :
-                       R3_PAGE_HUNDREDS_DO_NOT_CARE),
-
-               TENS_OF_PAGE(req->page) |
-               (req->pagemask & PG_TEN ?
-                       R3_PAGE_TENS_DO_CARE :
-                       R3_PAGE_TENS_DO_NOT_CARE),
-
-               UNITS_OF_PAGE(req->page) |
-               (req->pagemask & PG_UNIT ?
-                       R3_PAGE_UNITS_DO_CARE :
-                       R3_PAGE_UNITS_DO_NOT_CARE),
-
-               TENS_OF_HOUR(req->hour) |
-               (req->pagemask & HR_TEN ?
-                       R3_HOURS_TENS_DO_CARE :
-                       R3_HOURS_TENS_DO_NOT_CARE),
-
-               UNITS_OF_HOUR(req->hour) |
-               (req->pagemask & HR_UNIT ?
-                       R3_HOURS_UNITS_DO_CARE :
-                       R3_HOURS_UNITS_DO_NOT_CARE),
-
-               TENS_OF_MINUTE(req->minute) |
-               (req->pagemask & MIN_TEN ?
-                       R3_MINUTES_TENS_DO_CARE :
-                       R3_MINUTES_TENS_DO_NOT_CARE),
-
-               UNITS_OF_MINUTE(req->minute) |
-               (req->pagemask & MIN_UNIT ?
-                       R3_MINUTES_UNITS_DO_CARE :
-                       R3_MINUTES_UNITS_DO_NOT_CARE),
-
-               COMMAND_END) || i2c_senddata(t, SAA5246A_REGISTER_R2,
-
-               R2_IN_R3_SELECT_PAGE_HUNDREDS |
-               req->pgbuf << 4 |
-               R2_BANK_0 |
-               R2_HAMMING_CHECK_OFF,
-
-               HUNDREDS_OF_PAGE(req->page) |
-               R3_UPDATE_PAGE |
-               (req->pagemask & PG_HUND ?
-                       R3_PAGE_HUNDREDS_DO_CARE :
-                       R3_PAGE_HUNDREDS_DO_NOT_CARE),
-
-               COMMAND_END))
-       {
-               return -EIO;
-       }
-
-       t->is_searching[req->pgbuf] = true;
-       return 0;
-}
-
-/* This routine decodes the page number from the infobits contained in line 25.
- *
- * Parameters:
- * infobits: must be bits 0 to 9 of column 25
- *
- * Return value: page number coded in hexadecimal, i. e. page 123 is coded 0x123
- */
-static inline int saa5246a_extract_pagenum_from_infobits(
-    unsigned char infobits[10])
-{
-       int page_hundreds, page_tens, page_units;
-
-       page_units    = infobits[0] & ROW25_COLUMN0_PAGE_UNITS;
-       page_tens     = infobits[1] & ROW25_COLUMN1_PAGE_TENS;
-       page_hundreds = infobits[8] & ROW25_COLUMN8_PAGE_HUNDREDS;
-
-       /* page 0x.. means page 8.. */
-       if (page_hundreds == 0)
-               page_hundreds = 8;
-
-       return((page_hundreds << 8) | (page_tens << 4) | page_units);
-}
-
-/* Decodes the hour from the infobits contained in line 25.
- *
- * Parameters:
- * infobits: must be bits 0 to 9 of column 25
- *
- * Return: hour coded in hexadecimal, i. e. 12h is coded 0x12
- */
-static inline int saa5246a_extract_hour_from_infobits(
-    unsigned char infobits[10])
-{
-       int hour_tens, hour_units;
-
-       hour_units = infobits[4] & ROW25_COLUMN4_HOUR_UNITS;
-       hour_tens  = infobits[5] & ROW25_COLUMN5_HOUR_TENS;
-
-       return((hour_tens << 4) | hour_units);
-}
-
-/* Decodes the minutes from the infobits contained in line 25.
- *
- * Parameters:
- * infobits: must be bits 0 to 9 of column 25
- *
- * Return: minutes coded in hexadecimal, i. e. 10min is coded 0x10
- */
-static inline int saa5246a_extract_minutes_from_infobits(
-    unsigned char infobits[10])
-{
-       int minutes_tens, minutes_units;
-
-       minutes_units = infobits[2] & ROW25_COLUMN2_MINUTES_UNITS;
-       minutes_tens  = infobits[3] & ROW25_COLUMN3_MINUTES_TENS;
-
-       return((minutes_tens << 4) | minutes_units);
-}
-
-/* Reads the status bits contained in the first 10 columns of the first line
- * and extracts the information into info.
- *
- * Return value: 0 if successful
- */
-static inline int saa5246a_get_status(struct saa5246a_device *t,
-    vtx_pageinfo_t *info, unsigned char dau_no)
-{
-       unsigned char infobits[10];
-       int column;
-
-       if (dau_no >= NUM_DAUS)
-               return -EINVAL;
-
-       if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-
-               dau_no |
-               R8_DO_NOT_CLEAR_MEMORY,
-
-               R9_CURSER_ROW_25,
-
-               R10_CURSER_COLUMN_0,
-
-               COMMAND_END) ||
-               i2c_getdata(t, 10, infobits))
-       {
-               return -EIO;
-       }
-
-       info->pagenum = saa5246a_extract_pagenum_from_infobits(infobits);
-       info->hour    = saa5246a_extract_hour_from_infobits(infobits);
-       info->minute  = saa5246a_extract_minutes_from_infobits(infobits);
-       info->charset = ((infobits[7] & ROW25_COLUMN7_CHARACTER_SET) >> 1);
-       info->delete = !!(infobits[3] & ROW25_COLUMN3_DELETE_PAGE);
-       info->headline = !!(infobits[5] & ROW25_COLUMN5_INSERT_HEADLINE);
-       info->subtitle = !!(infobits[5] & ROW25_COLUMN5_INSERT_SUBTITLE);
-       info->supp_header = !!(infobits[6] & ROW25_COLUMN6_SUPPRESS_HEADER);
-       info->update = !!(infobits[6] & ROW25_COLUMN6_UPDATE_PAGE);
-       info->inter_seq = !!(infobits[6] & ROW25_COLUMN6_INTERRUPTED_SEQUENCE);
-       info->dis_disp = !!(infobits[6] & ROW25_COLUMN6_SUPPRESS_DISPLAY);
-       info->serial = !!(infobits[7] & ROW25_COLUMN7_SERIAL_MODE);
-       info->notfound = !!(infobits[8] & ROW25_COLUMN8_PAGE_NOT_FOUND);
-       info->pblf = !!(infobits[9] & ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR);
-       info->hamming = 0;
-       for (column = 0; column <= 7; column++) {
-               if (infobits[column] & ROW25_COLUMN0_TO_7_HAMMING_ERROR) {
-                       info->hamming = 1;
-                       break;
-               }
-       }
-       if (!info->hamming && !info->notfound)
-               t->is_searching[dau_no] = false;
-       return 0;
-}
-
-/* Reads 1 videotext page buffer of the SAA5246A.
- *
- * req is used both as input and as output. It contains information which part
- * must be read. The videotext page is copied into req->buffer.
- *
- * Return value: 0 if successful
- */
-static inline int saa5246a_get_page(struct saa5246a_device *t,
-       vtx_pagereq_t *req)
-{
-       int start, end, size;
-       char *buf;
-       int err;
-
-       if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS ||
-           req->start < 0 || req->start > req->end || req->end >= VTX_PAGESIZE)
-               return -EINVAL;
-
-       buf = kmalloc(VTX_PAGESIZE, GFP_KERNEL);
-       if (!buf)
-               return -ENOMEM;
-
-       /* Read "normal" part of page */
-       err = -EIO;
-
-       end = min(req->end, VTX_PAGESIZE - 1);
-       if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-                       req->pgbuf | R8_DO_NOT_CLEAR_MEMORY,
-                       ROW(req->start), COLUMN(req->start), COMMAND_END))
-               goto out;
-       if (i2c_getdata(t, end - req->start + 1, buf))
-               goto out;
-       err = -EFAULT;
-       if (copy_to_user(req->buffer, buf, end - req->start + 1))
-               goto out;
-
-       /* Always get the time from buffer 4, since this stupid SAA5246A only
-        * updates the currently displayed buffer...
-        */
-       if (REQ_CONTAINS_TIME(req)) {
-               start = max(req->start, POS_TIME_START);
-               end   = min(req->end,   POS_TIME_END);
-               size = end - start + 1;
-               err = -EINVAL;
-               if (size < 0)
-                       goto out;
-               err = -EIO;
-               if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-                               R8_ACTIVE_CHAPTER_4 | R8_DO_NOT_CLEAR_MEMORY,
-                               R9_CURSER_ROW_0, start, COMMAND_END))
-                       goto out;
-               if (i2c_getdata(t, size, buf))
-                       goto out;
-               err = -EFAULT;
-               if (copy_to_user(req->buffer + start - req->start, buf, size))
-                       goto out;
-       }
-       /* Insert the header from buffer 4 only, if acquisition circuit is still searching for a page */
-       if (REQ_CONTAINS_HEADER(req) && t->is_searching[req->pgbuf]) {
-               start = max(req->start, POS_HEADER_START);
-               end   = min(req->end,   POS_HEADER_END);
-               size = end - start + 1;
-               err = -EINVAL;
-               if (size < 0)
-                       goto out;
-               err = -EIO;
-               if (i2c_senddata(t, SAA5246A_REGISTER_R8,
-                               R8_ACTIVE_CHAPTER_4 | R8_DO_NOT_CLEAR_MEMORY,
-                               R9_CURSER_ROW_0, start, COMMAND_END))
-                       goto out;
-               if (i2c_getdata(t, end - start + 1, buf))
-                       goto out;
-               err = -EFAULT;
-               if (copy_to_user(req->buffer + start - req->start, buf, size))
-                       goto out;
-       }
-       err = 0;
-out:
-       kfree(buf);
-       return err;
-}
-
-/* Stops the acquisition circuit given in dau_no. The page buffer associated
- * with this acquisition circuit will no more be updated. The other daus are
- * not affected.
- *
- * Return value: 0 if successful
- */
-static inline int saa5246a_stop_dau(struct saa5246a_device *t,
-    unsigned char dau_no)
-{
-       if (dau_no >= NUM_DAUS)
-               return -EINVAL;
-       if (i2c_senddata(t, SAA5246A_REGISTER_R2,
-
-               R2_IN_R3_SELECT_PAGE_HUNDREDS |
-               dau_no << 4 |
-               R2_BANK_0 |
-               R2_HAMMING_CHECK_OFF,
-
-               R3_PAGE_HUNDREDS_0 |
-               R3_HOLD_PAGE |
-               R3_PAGE_HUNDREDS_DO_NOT_CARE,
-
-               COMMAND_END))
-       {
-               return -EIO;
-       }
-       t->is_searching[dau_no] = false;
-       return 0;
-}
-
-/*  Handles ioctls defined in videotext.h
- *
- *  Returns 0 if successful
- */
-static long do_saa5246a_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-       struct saa5246a_device *t = video_drvdata(file);
-
-       switch(cmd)
-       {
-               case VTXIOCGETINFO:
-               {
-                       vtx_info_t *info = arg;
-
-                       info->version_major = MAJOR_VERSION;
-                       info->version_minor = MINOR_VERSION;
-                       info->numpages = NUM_DAUS;
-                       return 0;
-               }
-
-               case VTXIOCCLRPAGE:
-               {
-                       vtx_pagereq_t *req = arg;
-
-                       if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                               return -EINVAL;
-                       memset(t->pgbuf[req->pgbuf], ' ', sizeof(t->pgbuf[0]));
-                       return 0;
-               }
-
-               case VTXIOCCLRFOUND:
-               {
-                       vtx_pagereq_t *req = arg;
-
-                       if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                               return -EINVAL;
-                       return(saa5246a_clear_found_bit(t, req->pgbuf));
-               }
-
-               case VTXIOCPAGEREQ:
-               {
-                       vtx_pagereq_t *req = arg;
-
-                       return(saa5246a_request_page(t, req));
-               }
-
-               case VTXIOCGETSTAT:
-               {
-                       vtx_pagereq_t *req = arg;
-                       vtx_pageinfo_t info;
-                       int rval;
-
-                       if ((rval = saa5246a_get_status(t, &info, req->pgbuf)))
-                               return rval;
-                       if(copy_to_user(req->buffer, &info,
-                               sizeof(vtx_pageinfo_t)))
-                               return -EFAULT;
-                       return 0;
-               }
-
-               case VTXIOCGETPAGE:
-               {
-                       vtx_pagereq_t *req = arg;
-
-                       return(saa5246a_get_page(t, req));
-               }
-
-               case VTXIOCSTOPDAU:
-               {
-                       vtx_pagereq_t *req = arg;
-
-                       return(saa5246a_stop_dau(t, req->pgbuf));
-               }
-
-               case VTXIOCPUTPAGE:
-               case VTXIOCSETDISP:
-               case VTXIOCPUTSTAT:
-                       return 0;
-
-               case VTXIOCCLRCACHE:
-               {
-                       return 0;
-               }
-
-               case VTXIOCSETVIRT:
-               {
-                       /* I do not know what "virtual mode" means */
-                       return 0;
-               }
-       }
-       return -EINVAL;
-}
-
-/*
- * Translates old vtx IOCTLs to new ones
- *
- * This keeps new kernel versions compatible with old userspace programs.
- */
-static inline unsigned int vtx_fix_command(unsigned int cmd)
-{
-       switch (cmd) {
-       case VTXIOCGETINFO_OLD:
-               cmd = VTXIOCGETINFO;
-               break;
-       case VTXIOCCLRPAGE_OLD:
-               cmd = VTXIOCCLRPAGE;
-               break;
-       case VTXIOCCLRFOUND_OLD:
-               cmd = VTXIOCCLRFOUND;
-               break;
-       case VTXIOCPAGEREQ_OLD:
-               cmd = VTXIOCPAGEREQ;
-               break;
-       case VTXIOCGETSTAT_OLD:
-               cmd = VTXIOCGETSTAT;
-               break;
-       case VTXIOCGETPAGE_OLD:
-               cmd = VTXIOCGETPAGE;
-               break;
-       case VTXIOCSTOPDAU_OLD:
-               cmd = VTXIOCSTOPDAU;
-               break;
-       case VTXIOCPUTPAGE_OLD:
-               cmd = VTXIOCPUTPAGE;
-               break;
-       case VTXIOCSETDISP_OLD:
-               cmd = VTXIOCSETDISP;
-               break;
-       case VTXIOCPUTSTAT_OLD:
-               cmd = VTXIOCPUTSTAT;
-               break;
-       case VTXIOCCLRCACHE_OLD:
-               cmd = VTXIOCCLRCACHE;
-               break;
-       case VTXIOCSETVIRT_OLD:
-               cmd = VTXIOCSETVIRT;
-               break;
-       }
-       return cmd;
-}
-
-/*
- *     Handle the locking
- */
-static long saa5246a_ioctl(struct file *file,
-                        unsigned int cmd, unsigned long arg)
-{
-       struct saa5246a_device *t = video_drvdata(file);
-       long err;
-
-       cmd = vtx_fix_command(cmd);
-       mutex_lock(&t->lock);
-       err = video_usercopy(file, cmd, arg, do_saa5246a_ioctl);
-       mutex_unlock(&t->lock);
-       return err;
-}
-
-static int saa5246a_open(struct file *file)
-{
-       struct saa5246a_device *t = video_drvdata(file);
-
-       if (test_and_set_bit(0, &t->in_use))
-               return -EBUSY;
-
-       if (i2c_senddata(t, SAA5246A_REGISTER_R0,
-               R0_SELECT_R11 |
-               R0_PLL_TIME_CONSTANT_LONG |
-               R0_ENABLE_nODD_EVEN_OUTPUT |
-               R0_ENABLE_HDR_POLL |
-               R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED |
-               R0_NO_FREE_RUN_PLL |
-               R0_NO_AUTOMATIC_FASTEXT_PROMPT,
-
-               R1_NON_INTERLACED_312_312_LINES |
-               R1_DEW |
-               R1_EXTENDED_PACKET_DISABLE |
-               R1_DAUS_ALL_ON |
-               R1_8_BITS_NO_PARITY |
-               R1_VCS_TO_SCS,
-
-               COMMAND_END) ||
-               i2c_senddata(t, SAA5246A_REGISTER_R4,
-
-               /* We do not care much for the TV display but nevertheless we
-                * need the currently displayed page later because only on that
-                * page the time is updated. */
-               R4_DISPLAY_PAGE_4,
-
-               COMMAND_END))
-       {
-               clear_bit(0, &t->in_use);
-               return -EIO;
-       }
-       return 0;
-}
-
-static int saa5246a_release(struct file *file)
-{
-       struct saa5246a_device *t = video_drvdata(file);
-
-       /* Stop all acquisition circuits. */
-       i2c_senddata(t, SAA5246A_REGISTER_R1,
-
-               R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES |
-               R1_DEW |
-               R1_EXTENDED_PACKET_DISABLE |
-               R1_DAUS_ALL_OFF |
-               R1_8_BITS_NO_PARITY |
-               R1_VCS_TO_SCS,
-
-               COMMAND_END);
-       clear_bit(0, &t->in_use);
-       return 0;
-}
-
-static const struct v4l2_file_operations saa_fops = {
-       .owner   = THIS_MODULE,
-       .open    = saa5246a_open,
-       .release = saa5246a_release,
-       .ioctl   = saa5246a_ioctl,
-};
-
-static struct video_device saa_template =
-{
-       .name     = "saa5246a",
-       .fops     = &saa_fops,
-       .release  = video_device_release,
-};
-
-static int saa5246a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA5246A, 0);
-}
-
-static const struct v4l2_subdev_core_ops saa5246a_core_ops = {
-       .g_chip_ident = saa5246a_g_chip_ident,
-};
-
-static const struct v4l2_subdev_ops saa5246a_ops = {
-       .core = &saa5246a_core_ops,
-};
-
-
-static int saa5246a_probe(struct i2c_client *client,
-                       const struct i2c_device_id *id)
-{
-       int pgbuf;
-       int err;
-       struct saa5246a_device *t;
-       struct v4l2_subdev *sd;
-
-       v4l_info(client, "chip found @ 0x%x (%s)\n",
-                       client->addr << 1, client->adapter->name);
-       v4l_info(client, "VideoText version %d.%d\n",
-                       MAJOR_VERSION, MINOR_VERSION);
-       t = kzalloc(sizeof(*t), GFP_KERNEL);
-       if (t == NULL)
-               return -ENOMEM;
-       sd = &t->sd;
-       v4l2_i2c_subdev_init(sd, client, &saa5246a_ops);
-       mutex_init(&t->lock);
-
-       /* Now create a video4linux device */
-       t->vdev = video_device_alloc();
-       if (t->vdev == NULL) {
-               kfree(t);
-               return -ENOMEM;
-       }
-       memcpy(t->vdev, &saa_template, sizeof(*t->vdev));
-
-       for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) {
-               memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0]));
-               t->is_searching[pgbuf] = false;
-       }
-       video_set_drvdata(t->vdev, t);
-
-       /* Register it */
-       err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
-       if (err < 0) {
-               video_device_release(t->vdev);
-               kfree(t);
-               return err;
-       }
-       return 0;
-}
-
-static int saa5246a_remove(struct i2c_client *client)
-{
-       struct v4l2_subdev *sd = i2c_get_clientdata(client);
-       struct saa5246a_device *t = to_dev(sd);
-
-       video_unregister_device(t->vdev);
-       v4l2_device_unregister_subdev(sd);
-       kfree(t);
-       return 0;
-}
-
-static const struct i2c_device_id saa5246a_id[] = {
-       { "saa5246a", 0 },
-       { }
-};
-MODULE_DEVICE_TABLE(i2c, saa5246a_id);
-
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
-       .name = "saa5246a",
-       .probe = saa5246a_probe,
-       .remove = saa5246a_remove,
-       .id_table = saa5246a_id,
-};
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
deleted file mode 100644 (file)
index 31ff27d..0000000
+++ /dev/null
@@ -1,650 +0,0 @@
-/*
- * Modified in order to keep it compatible both with new and old videotext IOCTLs by
- * Michael Geng <linux@MichaelGeng.de>
- *
- *     Cleaned up to use existing videodev interface and allow the idea
- *     of multiple teletext decoders on the video4linux iface. Changed i2c
- *     to cover addressing clashes on device busses. It's also rebuilt so
- *     you can add arbitary multiple teletext devices to Linux video4linux
- *     now (well 32 anyway).
- *
- *     Alan Cox <alan@lxorguk.ukuu.org.uk>
- *
- *     The original driver was heavily modified to match the i2c interface
- *     It was truncated to use the WinTV boards, too.
- *
- *     Copyright (c) 1998 Richard Guenther <richard.guenther@student.uni-tuebingen.de>
- *
- *     Derived From
- *
- * vtx.c:
- * This is a loadable character-device-driver for videotext-interfaces
- * (aka teletext). Please check the Makefile/README for a list of supported
- * interfaces.
- *
- * Copyright (c) 1994-97 Martin Buck  <martin-2.buck@student.uni-ulm.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/videotext.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-i2c-drv.h>
-
-MODULE_AUTHOR("Michael Geng <linux@MichaelGeng.de>");
-MODULE_DESCRIPTION("Philips SAA5249 Teletext decoder driver");
-MODULE_LICENSE("GPL");
-
-
-#define VTX_VER_MAJ 1
-#define VTX_VER_MIN 8
-
-
-#define NUM_DAUS 4
-#define NUM_BUFS 8
-
-static const int disp_modes[8][3] =
-{
-       { 0x46, 0x03, 0x03 },   /* DISPOFF */
-       { 0x46, 0xcc, 0xcc },   /* DISPNORM */
-       { 0x44, 0x0f, 0x0f },   /* DISPTRANS */
-       { 0x46, 0xcc, 0x46 },   /* DISPINS */
-       { 0x44, 0x03, 0x03 },   /* DISPOFF, interlaced */
-       { 0x44, 0xcc, 0xcc },   /* DISPNORM, interlaced */
-       { 0x44, 0x0f, 0x0f },   /* DISPTRANS, interlaced */
-       { 0x44, 0xcc, 0x46 }    /* DISPINS, interlaced */
-};
-
-
-
-#define PAGE_WAIT    msecs_to_jiffies(300)     /* Time between requesting page and */
-                                               /* checking status bits */
-#define PGBUF_EXPIRE msecs_to_jiffies(15000)   /* Time to wait before retransmitting */
-                                               /* page regardless of infobits */
-typedef struct {
-       u8 pgbuf[VTX_VIRTUALSIZE];              /* Page-buffer */
-       u8 laststat[10];                        /* Last value of infobits for DAU */
-       u8 sregs[7];                            /* Page-request registers */
-       unsigned long expire;                   /* Time when page will be expired */
-       unsigned clrfound : 1;                  /* VTXIOCCLRFOUND has been called */
-       unsigned stopped : 1;                   /* VTXIOCSTOPDAU has been called */
-} vdau_t;
-
-struct saa5249_device
-{
-       struct v4l2_subdev sd;
-       struct video_device *vdev;
-       vdau_t vdau[NUM_DAUS];                  /* Data for virtual DAUs (the 5249 only has one */
-                                               /* real DAU, so we have to simulate some more) */
-       int vtx_use_count;
-       int is_searching[NUM_DAUS];
-       int disp_mode;
-       int virtual_mode;
-       unsigned long in_use;
-       struct mutex lock;
-};
-
-static inline struct saa5249_device *to_dev(struct v4l2_subdev *sd)
-{
-       return container_of(sd, struct saa5249_device, sd);
-}
-
-
-#define CCTWR 34               /* I²C write/read-address of vtx-chip */
-#define CCTRD 35
-#define NOACK_REPEAT 10                /* Retry access this many times on failure */
-#define CLEAR_DELAY   msecs_to_jiffies(50)     /* Time required to clear a page */
-#define READY_TIMEOUT msecs_to_jiffies(30)     /* Time to wait for ready signal of I2C-bus interface */
-#define INIT_DELAY 500         /* Time in usec to wait at initialization of CEA interface */
-#define START_DELAY 10         /* Time in usec to wait before starting write-cycle (CEA) */
-
-#define VTX_DEV_MINOR 0
-
-static struct video_device saa_template;       /* Declared near bottom */
-
-/*
- *     Wait the given number of jiffies (10ms). This calls the scheduler, so the actual
- *     delay may be longer.
- */
-
-static void jdelay(unsigned long delay)
-{
-       sigset_t oldblocked = current->blocked;
-
-       spin_lock_irq(&current->sighand->siglock);
-       sigfillset(&current->blocked);
-       recalc_sigpending();
-       spin_unlock_irq(&current->sighand->siglock);
-       msleep_interruptible(jiffies_to_msecs(delay));
-
-       spin_lock_irq(&current->sighand->siglock);
-       current->blocked = oldblocked;
-       recalc_sigpending();
-       spin_unlock_irq(&current->sighand->siglock);
-}
-
-
-/*
- *     I2C interfaces
- */
-
-static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
-       char buf[64];
-
-       buf[0] = reg;
-       memcpy(buf+1, data, count);
-
-       if (i2c_master_send(client, buf, count + 1) == count + 1)
-               return 0;
-       return -1;
-}
-
-static int i2c_senddata(struct saa5249_device *t, ...)
-{
-       unsigned char buf[64];
-       int v;
-       int ct = 0;
-       va_list argp;
-       va_start(argp,t);
-
-       while ((v = va_arg(argp, int)) != -1)
-               buf[ct++] = v;
-
-       va_end(argp);
-       return i2c_sendbuf(t, buf[0], ct-1, buf+1);
-}
-
-/* Get count number of bytes from I²C-device at address adr, store them in buf. Start & stop
- * handshaking is done by this routine, ack will be sent after the last byte to inhibit further
- * sending of data. If uaccess is 'true', data is written to user-space with put_user.
- * Returns -1 if I²C-device didn't send acknowledge, 0 otherwise
- */
-
-static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
-
-       if (i2c_master_recv(client, buf, count) != count)
-               return -1;
-       return 0;
-}
-
-
-/*
- *     Standard character-device-driver functions
- */
-
-static long do_saa5249_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-       static int virtual_mode = false;
-       struct saa5249_device *t = video_drvdata(file);
-
-       switch (cmd) {
-       case VTXIOCGETINFO:
-       {
-               vtx_info_t *info = arg;
-               info->version_major = VTX_VER_MAJ;
-               info->version_minor = VTX_VER_MIN;
-               info->numpages = NUM_DAUS;
-               /*info->cct_type = CCT_TYPE;*/
-               return 0;
-       }
-
-       case VTXIOCCLRPAGE:
-       {
-               vtx_pagereq_t *req = arg;
-
-               if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                       return -EINVAL;
-               memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
-               t->vdau[req->pgbuf].clrfound = true;
-               return 0;
-       }
-
-       case VTXIOCCLRFOUND:
-       {
-               vtx_pagereq_t *req = arg;
-
-               if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                       return -EINVAL;
-               t->vdau[req->pgbuf].clrfound = true;
-               return 0;
-       }
-
-       case VTXIOCPAGEREQ:
-       {
-               vtx_pagereq_t *req = arg;
-               if (!(req->pagemask & PGMASK_PAGE))
-                       req->page = 0;
-               if (!(req->pagemask & PGMASK_HOUR))
-                       req->hour = 0;
-               if (!(req->pagemask & PGMASK_MINUTE))
-                       req->minute = 0;
-               if (req->page < 0 || req->page > 0x8ff) /* 7FF ?? */
-                       return -EINVAL;
-               req->page &= 0x7ff;
-               if (req->hour < 0 || req->hour > 0x3f || req->minute < 0 || req->minute > 0x7f ||
-                       req->pagemask < 0 || req->pagemask >= PGMASK_MAX || req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                       return -EINVAL;
-               t->vdau[req->pgbuf].sregs[0] = (req->pagemask & PG_HUND ? 0x10 : 0) | (req->page / 0x100);
-               t->vdau[req->pgbuf].sregs[1] = (req->pagemask & PG_TEN ? 0x10 : 0) | ((req->page / 0x10) & 0xf);
-               t->vdau[req->pgbuf].sregs[2] = (req->pagemask & PG_UNIT ? 0x10 : 0) | (req->page & 0xf);
-               t->vdau[req->pgbuf].sregs[3] = (req->pagemask & HR_TEN ? 0x10 : 0) | (req->hour / 0x10);
-               t->vdau[req->pgbuf].sregs[4] = (req->pagemask & HR_UNIT ? 0x10 : 0) | (req->hour & 0xf);
-               t->vdau[req->pgbuf].sregs[5] = (req->pagemask & MIN_TEN ? 0x10 : 0) | (req->minute / 0x10);
-               t->vdau[req->pgbuf].sregs[6] = (req->pagemask & MIN_UNIT ? 0x10 : 0) | (req->minute & 0xf);
-               t->vdau[req->pgbuf].stopped = false;
-               t->vdau[req->pgbuf].clrfound = true;
-               t->is_searching[req->pgbuf] = true;
-               return 0;
-       }
-
-       case VTXIOCGETSTAT:
-       {
-               vtx_pagereq_t *req = arg;
-               u8 infobits[10];
-               vtx_pageinfo_t info;
-               int a;
-
-               if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                       return -EINVAL;
-               if (!t->vdau[req->pgbuf].stopped) {
-                       if (i2c_senddata(t, 2, 0, -1) ||
-                               i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) ||
-                               i2c_senddata(t, 8, 0, 25, 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', -1) ||
-                               i2c_senddata(t, 2, 0, t->vdau[req->pgbuf].sregs[0] | 8, -1) ||
-                               i2c_senddata(t, 8, 0, 25, 0, -1))
-                               return -EIO;
-                       jdelay(PAGE_WAIT);
-                       if (i2c_getdata(t, 10, infobits))
-                               return -EIO;
-
-                       if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) &&   /* check FOUND-bit */
-                               (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) ||
-                               time_after_eq(jiffies, t->vdau[req->pgbuf].expire)))
-                       {               /* check if new page arrived */
-                               if (i2c_senddata(t, 8, 0, 0, 0, -1) ||
-                                       i2c_getdata(t, VTX_PAGESIZE, t->vdau[req->pgbuf].pgbuf))
-                                       return -EIO;
-                               t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE;
-                               memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE);
-                               if (t->virtual_mode) {
-                                       /* Packet X/24 */
-                                       if (i2c_senddata(t, 8, 0, 0x20, 0, -1) ||
-                                               i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 20 * 40))
-                                               return -EIO;
-                                       /* Packet X/27/0 */
-                                       if (i2c_senddata(t, 8, 0, 0x21, 0, -1) ||
-                                               i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 16 * 40))
-                                               return -EIO;
-                                       /* Packet 8/30/0...8/30/15
-                                        * FIXME: AFAIK, the 5249 does hamming-decoding for some bytes in packet 8/30,
-                                        *        so we should undo this here.
-                                        */
-                                       if (i2c_senddata(t, 8, 0, 0x22, 0, -1) ||
-                                               i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 23 * 40))
-                                               return -EIO;
-                               }
-                               t->vdau[req->pgbuf].clrfound = false;
-                               memcpy(t->vdau[req->pgbuf].laststat, infobits, sizeof(infobits));
-                       } else {
-                               memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits));
-                       }
-               } else {
-                       memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits));
-               }
-
-               info.pagenum = ((infobits[8] << 8) & 0x700) | ((infobits[1] << 4) & 0xf0) | (infobits[0] & 0x0f);
-               if (info.pagenum < 0x100)
-                       info.pagenum += 0x800;
-               info.hour = ((infobits[5] << 4) & 0x30) | (infobits[4] & 0x0f);
-               info.minute = ((infobits[3] << 4) & 0x70) | (infobits[2] & 0x0f);
-               info.charset = ((infobits[7] >> 1) & 7);
-               info.delete = !!(infobits[3] & 8);
-               info.headline = !!(infobits[5] & 4);
-               info.subtitle = !!(infobits[5] & 8);
-               info.supp_header = !!(infobits[6] & 1);
-               info.update = !!(infobits[6] & 2);
-               info.inter_seq = !!(infobits[6] & 4);
-               info.dis_disp = !!(infobits[6] & 8);
-               info.serial = !!(infobits[7] & 1);
-               info.notfound = !!(infobits[8] & 0x10);
-               info.pblf = !!(infobits[9] & 0x20);
-               info.hamming = 0;
-               for (a = 0; a <= 7; a++) {
-                       if (infobits[a] & 0xf0) {
-                               info.hamming = 1;
-                               break;
-                       }
-               }
-               if (t->vdau[req->pgbuf].clrfound)
-                       info.notfound = 1;
-               if (copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t)))
-                       return -EFAULT;
-               if (!info.hamming && !info.notfound)
-                       t->is_searching[req->pgbuf] = false;
-               return 0;
-       }
-
-       case VTXIOCGETPAGE:
-       {
-               vtx_pagereq_t *req = arg;
-               int start, end;
-
-               if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS || req->start < 0 ||
-                       req->start > req->end || req->end >= (virtual_mode ? VTX_VIRTUALSIZE : VTX_PAGESIZE))
-                       return -EINVAL;
-               if (copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1))
-                       return -EFAULT;
-
-                /*
-                 *     Always read the time directly from SAA5249
-                 */
-
-               if (req->start <= 39 && req->end >= 32) {
-                       int len;
-                       char buf[16];
-                       start = max(req->start, 32);
-                       end = min(req->end, 39);
-                       len = end - start + 1;
-                       if (i2c_senddata(t, 8, 0, 0, start, -1) ||
-                               i2c_getdata(t, len, buf))
-                               return -EIO;
-                       if (copy_to_user(req->buffer + start - req->start, buf, len))
-                               return -EFAULT;
-               }
-               /* Insert the current header if DAU is still searching for a page */
-               if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) {
-                       char buf[32];
-                       int len;
-
-                       start = max(req->start, 7);
-                       end = min(req->end, 31);
-                       len = end - start + 1;
-                       if (i2c_senddata(t, 8, 0, 0, start, -1) ||
-                               i2c_getdata(t, len, buf))
-                               return -EIO;
-                       if (copy_to_user(req->buffer + start - req->start, buf, len))
-                               return -EFAULT;
-               }
-               return 0;
-       }
-
-       case VTXIOCSTOPDAU:
-       {
-               vtx_pagereq_t *req = arg;
-
-               if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
-                       return -EINVAL;
-               t->vdau[req->pgbuf].stopped = true;
-               t->is_searching[req->pgbuf] = false;
-               return 0;
-       }
-
-       case VTXIOCPUTPAGE:
-       case VTXIOCSETDISP:
-       case VTXIOCPUTSTAT:
-               return 0;
-
-       case VTXIOCCLRCACHE:
-       {
-               if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11,
-                       ' ', ' ', ' ', ' ', ' ', ' ',
-                       ' ', ' ', ' ', ' ', ' ', ' ',
-                       ' ', ' ', ' ', ' ', ' ', ' ',
-                       ' ', ' ', ' ', ' ', ' ', ' ',
-                       -1))
-                       return -EIO;
-               if (i2c_senddata(t, 3, 0x20, -1))
-                       return -EIO;
-               jdelay(10 * CLEAR_DELAY);                       /* I have no idea how long we have to wait here */
-               return 0;
-       }
-
-       case VTXIOCSETVIRT:
-       {
-               /* The SAA5249 has virtual-row reception turned on always */
-               t->virtual_mode = (int)(long)arg;
-               return 0;
-       }
-       }
-       return -EINVAL;
-}
-
-/*
- * Translates old vtx IOCTLs to new ones
- *
- * This keeps new kernel versions compatible with old userspace programs.
- */
-static inline unsigned int vtx_fix_command(unsigned int cmd)
-{
-       switch (cmd) {
-       case VTXIOCGETINFO_OLD:
-               cmd = VTXIOCGETINFO;
-               break;
-       case VTXIOCCLRPAGE_OLD:
-               cmd = VTXIOCCLRPAGE;
-               break;
-       case VTXIOCCLRFOUND_OLD:
-               cmd = VTXIOCCLRFOUND;
-               break;
-       case VTXIOCPAGEREQ_OLD:
-               cmd = VTXIOCPAGEREQ;
-               break;
-       case VTXIOCGETSTAT_OLD:
-               cmd = VTXIOCGETSTAT;
-               break;
-       case VTXIOCGETPAGE_OLD:
-               cmd = VTXIOCGETPAGE;
-               break;
-       case VTXIOCSTOPDAU_OLD:
-               cmd = VTXIOCSTOPDAU;
-               break;
-       case VTXIOCPUTPAGE_OLD:
-               cmd = VTXIOCPUTPAGE;
-               break;
-       case VTXIOCSETDISP_OLD:
-               cmd = VTXIOCSETDISP;
-               break;
-       case VTXIOCPUTSTAT_OLD:
-               cmd = VTXIOCPUTSTAT;
-               break;
-       case VTXIOCCLRCACHE_OLD:
-               cmd = VTXIOCCLRCACHE;
-               break;
-       case VTXIOCSETVIRT_OLD:
-               cmd = VTXIOCSETVIRT;
-               break;
-       }
-       return cmd;
-}
-
-/*
- *     Handle the locking
- */
-
-static long saa5249_ioctl(struct file *file,
-                        unsigned int cmd, unsigned long arg)
-{
-       struct saa5249_device *t = video_drvdata(file);
-       long err;
-
-       cmd = vtx_fix_command(cmd);
-       mutex_lock(&t->lock);
-       err = video_usercopy(file, cmd, arg, do_saa5249_ioctl);
-       mutex_unlock(&t->lock);
-       return err;
-}
-
-static int saa5249_open(struct file *file)
-{
-       struct saa5249_device *t = video_drvdata(file);
-       int pgbuf;
-
-       if (test_and_set_bit(0, &t->in_use))
-               return -EBUSY;
-
-       if (i2c_senddata(t, 0, 0, -1) || /* Select R11 */
-               /* Turn off parity checks (we do this ourselves) */
-               i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) ||
-               /* Display TV-picture, no virtual rows */
-               i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1))
-               /* Set display to page 4 */
-       {
-               clear_bit(0, &t->in_use);
-               return -EIO;
-       }
-
-       for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) {
-               memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
-               memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
-               memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat));
-               t->vdau[pgbuf].expire = 0;
-               t->vdau[pgbuf].clrfound = true;
-               t->vdau[pgbuf].stopped = true;
-               t->is_searching[pgbuf] = false;
-       }
-       t->virtual_mode = false;
-       return 0;
-}
-
-
-
-static int saa5249_release(struct file *file)
-{
-       struct saa5249_device *t = video_drvdata(file);
-
-       i2c_senddata(t, 1, 0x20, -1);           /* Turn off CCT */
-       i2c_senddata(t, 5, 3, 3, -1);           /* Turn off TV-display */
-       clear_bit(0, &t->in_use);
-       return 0;
-}
-
-static const struct v4l2_file_operations saa_fops = {
-       .owner          = THIS_MODULE,
-       .open           = saa5249_open,
-       .release        = saa5249_release,
-       .ioctl          = saa5249_ioctl,
-};
-
-static struct video_device saa_template =
-{
-       .name           = "saa5249",
-       .fops           = &saa_fops,
-       .release        = video_device_release,
-};
-
-static int saa5249_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-       struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA5249, 0);
-}
-
-static const struct v4l2_subdev_core_ops saa5249_core_ops = {
-       .g_chip_ident = saa5249_g_chip_ident,
-};
-
-static const struct v4l2_subdev_ops saa5249_ops = {
-       .core = &saa5249_core_ops,
-};
-
-static int saa5249_probe(struct i2c_client *client,
-                       const struct i2c_device_id *id)
-{
-       int pgbuf;
-       int err;
-       struct saa5249_device *t;
-       struct v4l2_subdev *sd;
-
-       v4l_info(client, "chip found @ 0x%x (%s)\n",
-                       client->addr << 1, client->adapter->name);
-       v4l_info(client, "VideoText version %d.%d\n",
-                       VTX_VER_MAJ, VTX_VER_MIN);
-       t = kzalloc(sizeof(*t), GFP_KERNEL);
-       if (t == NULL)
-               return -ENOMEM;
-       sd = &t->sd;
-       v4l2_i2c_subdev_init(sd, client, &saa5249_ops);
-       mutex_init(&t->lock);
-
-       /* Now create a video4linux device */
-       t->vdev = video_device_alloc();
-       if (t->vdev == NULL) {
-               kfree(t);
-               kfree(client);
-               return -ENOMEM;
-       }
-       memcpy(t->vdev, &saa_template, sizeof(*t->vdev));
-
-       for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) {
-               memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
-               memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
-               memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat));
-               t->vdau[pgbuf].expire = 0;
-               t->vdau[pgbuf].clrfound = true;
-               t->vdau[pgbuf].stopped = true;
-               t->is_searching[pgbuf] = false;
-       }
-       video_set_drvdata(t->vdev, t);
-
-       /* Register it */
-       err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
-       if (err < 0) {
-               video_device_release(t->vdev);
-               kfree(t);
-               return err;
-       }
-       return 0;
-}
-
-static int saa5249_remove(struct i2c_client *client)
-{
-       struct v4l2_subdev *sd = i2c_get_clientdata(client);
-       struct saa5249_device *t = to_dev(sd);
-
-       video_unregister_device(t->vdev);
-       v4l2_device_unregister_subdev(sd);
-       kfree(t);
-       return 0;
-}
-
-static const struct i2c_device_id saa5249_id[] = {
-       { "saa5249", 0 },
-       { }
-};
-MODULE_DEVICE_TABLE(i2c, saa5249_id);
-
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
-       .name = "saa5249",
-       .probe = saa5249_probe,
-       .remove = saa5249_remove,
-       .id_table = saa5249_id,
-};