tg3 / broadcom: Optionally disable TXC if no link
Matt Carlson [Mon, 2 Nov 2009 14:32:38 +0000 (14:32 +0000)]
This patch adds code to disable the TXC and RXC reference clocks if link
is not available.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c
drivers/net/tg3.c
include/linux/brcmphy.h

index 7b10495..f63c96a 100644 (file)
 #define BCM54XX_SHD_SCR3               0x05
 #define  BCM54XX_SHD_SCR3_DEF_CLK125   0x0001
 #define  BCM54XX_SHD_SCR3_DLLAPD_DIS   0x0002
+#define  BCM54XX_SHD_SCR3_TRDDAPD      0x0004
 
 /* 01010: Auto Power-Down */
 #define BCM54XX_SHD_APD                        0x0a
@@ -362,6 +363,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
        else
                val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
 
+       if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+               val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
        if (orig != val)
                bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
 
@@ -409,6 +413,7 @@ static int bcm54xx_config_init(struct phy_device *phydev)
                bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
 
        if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+           (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
            (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
                bcm54xx_adjust_rxrefclk(phydev);
 
index f74bf91..50bb53d 100644 (file)
@@ -1103,6 +1103,7 @@ static int tg3_mdio_init(struct tg3 *tp)
        case TG3_PHY_ID_BCM50610M:
                phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
                                     PHY_BRCM_RX_REFCLK_UNUSED |
+                                    PHY_BRCM_DIS_TXCRXC_NOENRGY |
                                     PHY_BRCM_AUTO_PWRDWN_ENABLE;
                if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
                        phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
index 5943227..2b31b91 100644 (file)
@@ -9,4 +9,5 @@
 #define PHY_BRCM_EXT_IBND_RX_ENABLE    0x00001000
 #define PHY_BRCM_EXT_IBND_TX_ENABLE    0x00002000
 #define PHY_BRCM_CLEAR_RGMII_MODE      0x00004000
+#define PHY_BRCM_DIS_TXCRXC_NOENRGY    0x00008000
 #define PHY_BCM_FLAGS_VALID            0x80000000