[TG3]: Use lower DMA watermark for 5703.
Michael Chan [Tue, 13 Feb 2007 20:17:03 +0000 (12:17 -0800)]
Set DMA read watermark to 4 on 5703 in PCIX mode.  This is needed to
prevent some tx timeouts.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tg3.c

index 0b5b8e7..2df343f 100644 (file)
@@ -11314,6 +11314,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
                    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
                        u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
+                       u32 read_water = 0x7;
 
                        /* If the 5704 is behind the EPB bridge, we can
                         * do the less restrictive ONE_DMA workaround for
@@ -11325,8 +11326,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
                        else if (ccval == 0x6 || ccval == 0x7)
                                tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
 
+                       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703)
+                               read_water = 4;
                        /* Set bit 23 to enable PCIX hw bug fix */
-                       tp->dma_rwctrl |= 0x009f0000;
+                       tp->dma_rwctrl |=
+                               (read_water << DMA_RWCTRL_READ_WATER_SHIFT) |
+                               (0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
+                               (1 << 23);
                } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
                        /* 5780 always in PCIX mode */
                        tp->dma_rwctrl |= 0x00144000;