dts: add ESDHC weird voltage bits workaround
Roy Zang [Wed, 11 Aug 2010 01:02:01 +0000 (18:02 -0700)]
P4080 ESDHC controller does not support 1.8V and 3.0V voltage.  but the
host controller capabilities register wrongly set the bits.  This patch
adds the workaround to correct the weird voltage setting bits.  Only 3.3V
voltage is supported for P4080 ESDHC controller.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/powerpc/boot/dts/p4080ds.dts

index efa0091..2f0de24 100644 (file)
                        reg = <0x114000 0x1000>;
                        interrupts = <48 2>;
                        interrupt-parent = <&mpic>;
+                       voltage-ranges = <3300 3300>;
                        sdhci,auto-cmd12;
                };