Merge branch 'next-i2c-xilinx' into next-i2c
Ben Dooks [Sun, 7 Mar 2010 22:29:28 +0000 (22:29 +0000)]
Documentation/powerpc/dts-bindings/fsl/i2c.txt
drivers/i2c/busses/Kconfig
drivers/i2c/busses/i2c-mpc.c
drivers/i2c/busses/i2c-omap.c
drivers/i2c/busses/i2c-pnx.c

index b6d2e21..50da203 100644 (file)
@@ -2,15 +2,14 @@
 
 Required properties :
 
- - device_type : Should be "i2c"
  - reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+   mpc5200 or mpc5200b. For the mpc5121, an additional node
+   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
 
 Recommended properties :
 
- - compatible : compatibility list with 2 entries, the first should
-   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
-   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
-   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -24,25 +23,40 @@ Recommended properties :
 
 Examples :
 
+       /* MPC5121 based board */
+       i2c@1740 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+               reg = <0x1740 0x20>;
+               interrupts = <11 0x8>;
+               interrupt-parent = <&ipic>;
+               clock-frequency = <100000>;
+       };
+
+       i2ccontrol@1760 {
+               compatible = "fsl,mpc5121-i2c-ctrl";
+               reg = <0x1760 0x8>;
+       };
+
+       /* MPC5200B based board */
        i2c@3d00 {
                #address-cells = <1>;
                #size-cells = <0>;
                compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-               cell-index = <0>;
                reg = <0x3d00 0x40>;
                interrupts = <2 15 0>;
                interrupt-parent = <&mpc5200_pic>;
                fsl,preserve-clocking;
        };
 
+       /* MPC8544 base board */
        i2c@3100 {
                #address-cells = <1>;
                #size-cells = <0>;
-               cell-index = <1>;
                compatible = "fsl,mpc8544-i2c", "fsl-i2c";
                reg = <0x3100 0x100>;
                interrupts = <43 2>;
                interrupt-parent = <&mpic>;
                clock-frequency = <400000>;
        };
-
index de04cd8..02afe89 100644 (file)
@@ -419,13 +419,12 @@ config I2C_IXP2000
          instead.
 
 config I2C_MPC
-       tristate "MPC107/824x/85xx/52xx/86xx"
+       tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
        depends on PPC32
        help
          If you say yes to this option, support will be included for the
-         built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-         MPC85xx/MPC8641 family processors. The driver may also work on 52xx
-         family processors, though interrupts are known not to work.
+         built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+         MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-mpc.
index f627001..78a15af 100644 (file)
@@ -31,6 +31,9 @@
 
 #define DRV_NAME "mpc-i2c"
 
+#define MPC_I2C_CLOCK_LEGACY   0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
 #define MPC_I2C_FDR   0x04
 #define MPC_I2C_CR    0x08
 #define MPC_I2C_SR    0x0c
@@ -66,10 +69,9 @@ struct mpc_i2c_divider {
        u16 fdr;        /* including dfsrr */
 };
 
-struct mpc_i2c_match_data {
-       void (*setclock)(struct device_node *node,
-                        struct mpc_i2c *i2c,
-                        u32 clock, u32 prescaler);
+struct mpc_i2c_data {
+       void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+                     u32 clock, u32 prescaler);
        u32 prescaler;
 };
 
@@ -164,8 +166,8 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
        return 0;
 }
 
-#ifdef CONFIG_PPC_MPC52xx
-static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
        {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
        {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
        {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
@@ -186,14 +188,15 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
        {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
 };
 
-int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
+static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+                                         int prescaler)
 {
        const struct mpc_i2c_divider *div = NULL;
        unsigned int pvr = mfspr(SPRN_PVR);
        u32 divider;
        int i;
 
-       if (!clock)
+       if (clock == MPC_I2C_CLOCK_LEGACY)
                return -EINVAL;
 
        /* Determine divider value */
@@ -215,12 +218,18 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
        return div ? (int)div->fdr : -EINVAL;
 }
 
-static void mpc_i2c_setclock_52xx(struct device_node *node,
-                                 struct mpc_i2c *i2c,
-                                 u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
 {
        int ret, fdr;
 
+       if (clock == MPC_I2C_CLOCK_PRESERVE) {
+               dev_dbg(i2c->dev, "using fdr %d\n",
+                       readb(i2c->base + MPC_I2C_FDR));
+               return;
+       }
+
        ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
        fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
@@ -229,16 +238,52 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
        if (ret >= 0)
                dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
 }
-#else /* !CONFIG_PPC_MPC52xx */
-static void mpc_i2c_setclock_52xx(struct device_node *node,
-                                 struct mpc_i2c *i2c,
-                                 u32 clock, u32 prescaler)
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
+{
+       struct device_node *node_ctrl;
+       void __iomem *ctrl;
+       const u32 *pval;
+       u32 idx;
+
+       /* Enable I2C interrupts for mpc5121 */
+       node_ctrl = of_find_compatible_node(NULL, NULL,
+                                           "fsl,mpc5121-i2c-ctrl");
+       if (node_ctrl) {
+               ctrl = of_iomap(node_ctrl, 0);
+               if (ctrl) {
+                       /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+                       pval = of_get_property(node, "reg", NULL);
+                       idx = (*pval & 0xff) / 0x20;
+                       setbits32(ctrl, 1 << (24 + idx * 2));
+                       iounmap(ctrl);
+               }
+               of_node_put(node_ctrl);
+       }
+
+       /* The clock setup for the 52xx works also fine for the 512x */
+       mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
 {
 }
-#endif /* CONFIG_PPC_MPC52xx*/
+#endif /* CONFIG_PPC_MPC512x */
 
 #ifdef CONFIG_FSL_SOC
-static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
        {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
        {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
        {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
@@ -258,7 +303,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
        {49152, 0x011e}, {61440, 0x011f}
 };
 
-u32 mpc_i2c_get_sec_cfg_8xxx(void)
+static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
 {
        struct device_node *node = NULL;
        u32 __iomem *reg;
@@ -287,13 +332,14 @@ u32 mpc_i2c_get_sec_cfg_8xxx(void)
        return val;
 }
 
-int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
+static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+                                         u32 prescaler)
 {
        const struct mpc_i2c_divider *div = NULL;
        u32 divider;
        int i;
 
-       if (!clock)
+       if (clock == MPC_I2C_CLOCK_LEGACY)
                return -EINVAL;
 
        /* Determine proper divider value */
@@ -320,12 +366,19 @@ int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
        return div ? (int)div->fdr : -EINVAL;
 }
 
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
-                                 struct mpc_i2c *i2c,
-                                 u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
 {
        int ret, fdr;
 
+       if (clock == MPC_I2C_CLOCK_PRESERVE) {
+               dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+                       readb(i2c->base + MPC_I2C_DFSRR),
+                       readb(i2c->base + MPC_I2C_FDR));
+               return;
+       }
+
        ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
        fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
@@ -338,9 +391,9 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
 }
 
 #else /* !CONFIG_FSL_SOC */
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
-                                 struct mpc_i2c *i2c,
-                                 u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
 {
 }
 #endif /* CONFIG_FSL_SOC */
@@ -494,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 {
        struct mpc_i2c *i2c;
        const u32 *prop;
-       u32 clock = 0;
+       u32 clock = MPC_I2C_CLOCK_LEGACY;
        int result = 0;
        int plen;
 
@@ -523,21 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
                }
        }
 
-       if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+       if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+               clock = MPC_I2C_CLOCK_PRESERVE;
+       } else {
                prop = of_get_property(op->node, "clock-frequency", &plen);
                if (prop && plen == sizeof(u32))
                        clock = *prop;
+       }
 
-               if (match->data) {
-                       struct mpc_i2c_match_data *data =
-                               (struct mpc_i2c_match_data *)match->data;
-                       data->setclock(op->node, i2c, clock, data->prescaler);
-               } else {
-                       /* Backwards compatibility */
-                       if (of_get_property(op->node, "dfsrr", NULL))
-                               mpc_i2c_setclock_8xxx(op->node, i2c,
-                                                     clock, 0);
-               }
+       if (match->data) {
+               struct mpc_i2c_data *data = match->data;
+               data->setup(op->node, i2c, clock, data->prescaler);
+       } else {
+               /* Backwards compatibility */
+               if (of_get_property(op->node, "dfsrr", NULL))
+                       mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
        }
 
        dev_set_drvdata(&op->dev, i2c);
@@ -582,47 +635,42 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
        return 0;
 };
 
+static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
+       .setup = mpc_i2c_setup_512x,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
+       .setup = mpc_i2c_setup_52xx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata = {
+       .setup = mpc_i2c_setup_8xxx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata = {
+       .setup = mpc_i2c_setup_8xxx,
+       .prescaler = 2,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata = {
+       .setup = mpc_i2c_setup_8xxx,
+       .prescaler = 3,
+};
+
 static const struct of_device_id mpc_i2c_of_match[] = {
-       {.compatible = "mpc5200-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_52xx,
-               },
-       },
-       {.compatible = "fsl,mpc5200b-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_52xx,
-               },
-       },
-       {.compatible = "fsl,mpc5200-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_52xx,
-               },
-       },
-       {.compatible = "fsl,mpc8313-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_8xxx,
-               },
-       },
-       {.compatible = "fsl,mpc8543-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_8xxx,
-                       .prescaler = 2,
-               },
-       },
-       {.compatible = "fsl,mpc8544-i2c",
-        .data = &(struct mpc_i2c_match_data) {
-                       .setclock = mpc_i2c_setclock_8xxx,
-                       .prescaler = 3,
-               },
+       {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+       {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+       {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+       {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
+       {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+       {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+       {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
        /* Backward compatibility */
-       },
        {.compatible = "fsl-i2c", },
        {},
 };
-
 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
 
-
 /* Structure for a device driver */
 static struct of_platform_driver mpc_i2c_driver = {
        .match_table    = mpc_i2c_of_match,
@@ -655,5 +703,5 @@ module_exit(fsl_i2c_exit);
 
 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
-                  "MPC824x/85xx/52xx processors");
+                  "MPC824x/83xx/85xx/86xx/512x/52xx processors");
 MODULE_LICENSE("GPL");
index 0037e31..913abd7 100644 (file)
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
 #define OMAP_I2C_REV_REG               0x00
-#define OMAP_I2C_IE_REG                        0x04
-#define OMAP_I2C_STAT_REG              0x08
-#define OMAP_I2C_IV_REG                        0x0c
+#define OMAP_I2C_IE_REG                        0x01
+#define OMAP_I2C_STAT_REG              0x02
+#define OMAP_I2C_IV_REG                        0x03
 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG                        0x0c
-#define OMAP_I2C_SYSS_REG              0x10
-#define OMAP_I2C_BUF_REG               0x14
-#define OMAP_I2C_CNT_REG               0x18
-#define OMAP_I2C_DATA_REG              0x1c
-#define OMAP_I2C_SYSC_REG              0x20
-#define OMAP_I2C_CON_REG               0x24
-#define OMAP_I2C_OA_REG                        0x28
-#define OMAP_I2C_SA_REG                        0x2c
-#define OMAP_I2C_PSC_REG               0x30
-#define OMAP_I2C_SCLL_REG              0x34
-#define OMAP_I2C_SCLH_REG              0x38
-#define OMAP_I2C_SYSTEST_REG           0x3c
-#define OMAP_I2C_BUFSTAT_REG           0x40
+#define OMAP_I2C_WE_REG                        0x03
+#define OMAP_I2C_SYSS_REG              0x04
+#define OMAP_I2C_BUF_REG               0x05
+#define OMAP_I2C_CNT_REG               0x06
+#define OMAP_I2C_DATA_REG              0x07
+#define OMAP_I2C_SYSC_REG              0x08
+#define OMAP_I2C_CON_REG               0x09
+#define OMAP_I2C_OA_REG                        0x0a
+#define OMAP_I2C_SA_REG                        0x0b
+#define OMAP_I2C_PSC_REG               0x0c
+#define OMAP_I2C_SCLL_REG              0x0d
+#define OMAP_I2C_SCLH_REG              0x0e
+#define OMAP_I2C_SYSTEST_REG           0x0f
+#define OMAP_I2C_BUFSTAT_REG           0x10
 
 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
 #define OMAP_I2C_IE_XDR                (1 << 14)       /* TX Buffer drain int enable */
@@ -161,6 +161,7 @@ struct omap_i2c_dev {
        struct device           *dev;
        void __iomem            *base;          /* virtual */
        int                     irq;
+       int                     reg_shift;      /* bit shift for I2C register addresses */
        struct clk              *iclk;          /* Interface clock */
        struct clk              *fclk;          /* Functional clock */
        struct completion       cmd_complete;
@@ -189,12 +190,12 @@ struct omap_i2c_dev {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
                                      int reg, u16 val)
 {
-       __raw_writew(val, i2c_dev->base + reg);
+       __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-       return __raw_readw(i2c_dev->base + reg);
+       return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
 }
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -924,6 +925,11 @@ omap_i2c_probe(struct platform_device *pdev)
                dev->b_hw = 1; /* Enable hardware fixes */
        }
 
+       if (cpu_is_omap7xx())
+               dev->reg_shift = 1;
+       else
+               dev->reg_shift = 2;
+
        /* reset ASAP, clearing any IRQs */
        omap_i2c_init(dev);
 
index 2b0bd0b..9532dee 100644 (file)
@@ -172,12 +172,6 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
                /* We still have something to talk about... */
                val = *alg_data->mif.buf++;
 
-               if (alg_data->mif.len == 1) {
-                       val |= stop_bit;
-                       if (!alg_data->last)
-                               val |= start_bit;
-               }
-
                alg_data->mif.len--;
                iowrite32(val, I2C_REG_TX(alg_data));
 
@@ -251,11 +245,6 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
                        __func__);
 
                if (alg_data->mif.len == 1) {
-                       /* Last byte, do not acknowledge next rcv. */
-                       val |= stop_bit;
-                       if (!alg_data->last)
-                               val |= start_bit;
-
                        /*
                         * Enable interrupt RFDAIE (data in Rx fifo),
                         * and disable DRMIE (need data for Tx)