[POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratum
Kim Phillips [Mon, 5 Nov 2007 18:15:51 +0000 (12:15 -0600)]
If on a rev. 2.1, adjust UCC clock and data timing characteristics
as specified in the rev.2.1 erratum #2.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/83xx/mpc836x_mds.c

index 0f3855c..0a72260 100644 (file)
@@ -96,14 +96,39 @@ static void __init mpc836x_mds_setup_arch(void)
 
        if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
                        != NULL){
+               uint svid;
+
                /* Reset the Ethernet PHY */
-               bcsr_regs[9] &= ~0x20;
+#define BCSR9_GETHRST 0x20
+               clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
                udelay(1000);
-               bcsr_regs[9] |= 0x20;
+               setbits8(&bcsr_regs[9], BCSR9_GETHRST);
+
+               /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+               svid = mfspr(SPRN_SVR);
+               if (svid == 0x80480021) {
+                       void __iomem *immap;
+
+                       immap = ioremap(get_immrbase() + 0x14a8, 8);
+
+                       /*
+                        * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+                        * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+                        */
+                       setbits32(immap, 0x0c003000);
+
+                       /*
+                        * IMMR + 0x14AC[20:27] = 10101010
+                        * (data delay for both UCC's)
+                        */
+                       clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+
+                       iounmap(immap);
+               }
+
                iounmap(bcsr_regs);
                of_node_put(np);
        }
-
 #endif                         /* CONFIG_QUICC_ENGINE */
 }