serial/imx: add device tree probe support
Shawn Guo [Fri, 24 Jun 2011 18:04:34 +0000 (02:04 +0800)]
It adds device tree probe support for imx tty/serial driver.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>

Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt [new file with mode: 0644]
drivers/tty/serial/imx.c

diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
new file mode 100644 (file)
index 0000000..a9c0406
--- /dev/null
@@ -0,0 +1,19 @@
+* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-uart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Optional properties:
+- fsl,uart-has-rtscts : Indicate the uart has rts and cts
+- fsl,irda-mode : Indicate the uart supports irda mode
+
+Example:
+
+uart@73fbc000 {
+       compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+       reg = <0x73fbc000 0x4000>;
+       interrupts = <31>;
+       fsl,uart-has-rtscts;
+};
index 2d5eac2..827db76 100644 (file)
@@ -45,6 +45,8 @@
 #include <linux/delay.h>
 #include <linux/rational.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -235,6 +237,13 @@ static struct platform_device_id imx_uart_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
 
+static struct of_device_id imx_uart_dt_ids[] = {
+       { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
+       { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
+
 static inline unsigned uts_reg(struct imx_port *sport)
 {
        return sport->devdata->uts_reg;
@@ -1273,6 +1282,63 @@ static int serial_imx_resume(struct platform_device *dev)
        return 0;
 }
 
+#ifdef CONFIG_OF
+static int serial_imx_probe_dt(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       const struct of_device_id *of_id =
+                       of_match_device(imx_uart_dt_ids, &pdev->dev);
+       int ret;
+
+       if (!np)
+               return -ENODEV;
+
+       ret = of_alias_get_id(np, "serial");
+       if (ret < 0) {
+               pr_err("%s: failed to get alias id, errno %d\n",
+                       __func__, ret);
+               return -ENODEV;
+       } else {
+               sport->port.line = ret;
+       }
+
+       if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
+               sport->have_rtscts = 1;
+
+       if (of_get_property(np, "fsl,irda-mode", NULL))
+               sport->use_irda = 1;
+
+       sport->devdata = of_id->data;
+
+       return 0;
+}
+#else
+static inline int serial_imx_probe_dt(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       return -ENODEV;
+}
+#endif
+
+static void serial_imx_probe_pdata(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       struct imxuart_platform_data *pdata = pdev->dev.platform_data;
+
+       sport->port.line = pdev->id;
+       sport->devdata = (struct imx_uart_data  *) pdev->id_entry->driver_data;
+
+       if (!pdata)
+               return;
+
+       if (pdata->flags & IMXUART_HAVE_RTSCTS)
+               sport->have_rtscts = 1;
+
+       if (pdata->flags & IMXUART_IRDA)
+               sport->use_irda = 1;
+}
+
 static int serial_imx_probe(struct platform_device *pdev)
 {
        struct imx_port *sport;
@@ -1285,6 +1351,10 @@ static int serial_imx_probe(struct platform_device *pdev)
        if (!sport)
                return -ENOMEM;
 
+       ret = serial_imx_probe_dt(sport, pdev);
+       if (ret == -ENODEV)
+               serial_imx_probe_pdata(sport, pdev);
+
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                ret = -ENODEV;
@@ -1309,11 +1379,9 @@ static int serial_imx_probe(struct platform_device *pdev)
        sport->port.fifosize = 32;
        sport->port.ops = &imx_pops;
        sport->port.flags = UPF_BOOT_AUTOCONF;
-       sport->port.line = pdev->id;
        init_timer(&sport->timer);
        sport->timer.function = imx_timeout;
        sport->timer.data     = (unsigned long)sport;
-       sport->devdata = (struct imx_uart_data  *) pdev->id_entry->driver_data;
 
        sport->clk = clk_get(&pdev->dev, "uart");
        if (IS_ERR(sport->clk)) {
@@ -1324,17 +1392,9 @@ static int serial_imx_probe(struct platform_device *pdev)
 
        sport->port.uartclk = clk_get_rate(sport->clk);
 
-       imx_ports[pdev->id] = sport;
+       imx_ports[sport->port.line] = sport;
 
        pdata = pdev->dev.platform_data;
-       if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-               sport->have_rtscts = 1;
-
-#ifdef CONFIG_IRDA
-       if (pdata && (pdata->flags & IMXUART_IRDA))
-               sport->use_irda = 1;
-#endif
-
        if (pdata && pdata->init) {
                ret = pdata->init(pdev);
                if (ret)
@@ -1396,6 +1456,7 @@ static struct platform_driver serial_imx_driver = {
        .driver         = {
                .name   = "imx-uart",
                .owner  = THIS_MODULE,
+               .of_match_table = imx_uart_dt_ids,
        },
 };