ALSA: oxygen: add HiFier Serenade support
Clemens Ladisch [Wed, 3 Nov 2010 11:26:35 +0000 (12:26 +0100)]
Add support for the TempoTec/MediaTek HiFier Serenade sound card.

The PCI ID was already there, but the driver handled it like the
Fantasia model, which resulted in a dummy recording device.  As
a stereo output-only card, this model is to be handled exactly
like the HG2PCI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation/sound/alsa/ALSA-Configuration.txt
sound/pci/Kconfig
sound/pci/oxygen/oxygen.c

index fdd388d..7124340 100644 (file)
@@ -1535,6 +1535,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     * Razer Barracuda AC-1
     * Sondigo Inferno
     * TempoTec HiFier Fantasia
+    * TempoTec HiFier Serenade
 
     This module supports autoprobe and multiple cards.
 
index f7139d0..5add96b 100644 (file)
@@ -226,6 +226,7 @@ config SND_OXYGEN
           * Razer Barracuda AC-1
           * Sondigo Inferno
           * TempoTec/MediaTek HiFier Fantasia
+          * TempoTec/MediaTek HiFier Serenade
 
          To compile this driver as a module, choose M here: the module
          will be called snd-oxygen.
index 13f39e5..ea8fffe 100644 (file)
@@ -70,8 +70,8 @@ enum {
        MODEL_MERIDIAN,
        MODEL_CLARO,
        MODEL_CLARO_HALO,
-       MODEL_HIFIER,
-       MODEL_HG2PCI,
+       MODEL_FANTASIA,
+       MODEL_2CH_OUTPUT,
 };
 
 static DEFINE_PCI_DEVICE_TABLE(oxygen_ids) = {
@@ -85,10 +85,11 @@ static DEFINE_PCI_DEVICE_TABLE(oxygen_ids) = {
        { OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF },
        { OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
        /* Kuroutoshikou CMI8787-HG2PCI */
-       { OXYGEN_PCI_SUBID(0x13f6, 0xffff), .driver_data = MODEL_HG2PCI },
+       { OXYGEN_PCI_SUBID(0x13f6, 0xffff), .driver_data = MODEL_2CH_OUTPUT },
        /* TempoTec HiFier Fantasia */
-       { OXYGEN_PCI_SUBID(0x14c3, 0x1710), .driver_data = MODEL_HIFIER },
-       { OXYGEN_PCI_SUBID(0x14c3, 0x1711), .driver_data = MODEL_HIFIER },
+       { OXYGEN_PCI_SUBID(0x14c3, 0x1710), .driver_data = MODEL_FANTASIA },
+       /* TempoTec HiFier Serenade */
+       { OXYGEN_PCI_SUBID(0x14c3, 0x1711), .driver_data = MODEL_2CH_OUTPUT },
        /* AuzenTech X-Meridian */
        { OXYGEN_PCI_SUBID(0x415a, 0x5431), .driver_data = MODEL_MERIDIAN },
        /* HT-Omega Claro */
@@ -244,13 +245,13 @@ static void claro_halo_init(struct oxygen *chip)
        claro_enable_hp(chip);
 }
 
-static void hifier_init(struct oxygen *chip)
+static void fantasia_init(struct oxygen *chip)
 {
        ak4396_init(chip);
        snd_component_add(chip->card, "CS5340");
 }
 
-static void hg2pci_init(struct oxygen *chip)
+static void stereo_output_init(struct oxygen *chip)
 {
        ak4396_init(chip);
 }
@@ -583,20 +584,20 @@ static int __devinit get_oxygen_model(struct oxygen *chip,
                                            CAPTURE_0_FROM_I2S_2 |
                                            CAPTURE_1_FROM_SPDIF;
                break;
-       case MODEL_HIFIER:
-       case MODEL_HG2PCI:
+       case MODEL_FANTASIA:
+       case MODEL_2CH_OUTPUT:
                chip->model.shortname = "C-Media CMI8787";
                chip->model.chip = "CMI8787";
-               if (id->driver_data == MODEL_HIFIER)
-                       chip->model.init = hifier_init;
+               if (id->driver_data == MODEL_FANTASIA)
+                       chip->model.init = fantasia_init;
                else
-                       chip->model.init = hg2pci_init;
+                       chip->model.init = stereo_output_init;
                chip->model.resume = stereo_resume;
                chip->model.mixer_init = generic_mixer_init;
                chip->model.set_adc_params = set_no_params;
                chip->model.device_config = PLAYBACK_0_TO_I2S |
                                            PLAYBACK_1_TO_SPDIF;
-               if (id->driver_data == MODEL_HIFIER)
+               if (id->driver_data == MODEL_FANTASIA)
                        chip->model.device_config |= CAPTURE_0_FROM_I2S_1;
                chip->model.dac_channels = 2;
                break;