mfd: Initial support for twl5031
Ilkka Koskinen [Tue, 10 Nov 2009 15:26:15 +0000 (17:26 +0200)]
TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/twl4030-core.c
drivers/mfd/twl4030-irq.c
include/linux/i2c/twl4030.h

index 90a38e4..334c86f 100644 (file)
 #define TWL4030_BASEADD_PWMB           0x00F1
 #define TWL4030_BASEADD_KEYPAD         0x00D2
 
+#define TWL5031_BASEADD_ACCESSORY      0x0074 /* Replaces Main Charge */
+#define TWL5031_BASEADD_INTERRUPTS     0x00B9 /* Different than TWL4030's
+                                                 one */
+
 /* subchip/slave 3 - POWER ID */
 #define TWL4030_BASEADD_BACKUP         0x0014
 #define TWL4030_BASEADD_INT            0x002E
 /* chip-specific feature flags, for i2c_device_id.driver_data */
 #define TWL4030_VAUX2          BIT(0)  /* pre-5030 voltage ranges */
 #define TPS_SUBSET             BIT(1)  /* tps659[23]0 have fewer LDOs */
+#define TWL5031                        BIT(2)  /* twl5031 has different registers */
 
 /*----------------------------------------------------------------------*/
 
@@ -241,6 +246,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
        { 2, TWL4030_BASEADD_PWM1 },
        { 2, TWL4030_BASEADD_PWMA },
        { 2, TWL4030_BASEADD_PWMB },
+       { 2, TWL5031_BASEADD_ACCESSORY },
+       { 2, TWL5031_BASEADD_INTERRUPTS },
 
        { 3, TWL4030_BASEADD_BACKUP },
        { 3, TWL4030_BASEADD_INT },
@@ -488,7 +495,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 {
        struct device   *child;
 
-       if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+       if (twl_has_bci() && pdata->bci &&
+           !(features & (TPS_SUBSET | TWL5031))) {
                child = add_child(3, "twl4030_bci",
                                pdata->bci, sizeof(*pdata->bci),
                                false,
@@ -760,6 +768,7 @@ static void clocks_init(struct device *dev,
 
 int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
 int twl_exit_irq(void);
+int twl_init_chip_irq(const char *chip);
 
 static int twl4030_remove(struct i2c_client *client)
 {
@@ -835,6 +844,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
        if (client->irq
                        && pdata->irq_base
                        && pdata->irq_end > pdata->irq_base) {
+               twl_init_chip_irq(id->name);
                status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
                if (status < 0)
                        goto fail;
@@ -850,6 +860,7 @@ fail:
 static const struct i2c_device_id twl4030_ids[] = {
        { "twl4030", TWL4030_VAUX2 },   /* "Triton 2" */
        { "twl5030", 0 },               /* T2 updated */
+       { "twl5031", TWL5031 },         /* TWL5030 updated */
        { "tps65950", 0 },              /* catalog version of twl5030 */
        { "tps65930", TPS_SUBSET },     /* fewer LDOs and DACs; no charger */
        { "tps65920", TPS_SUBSET },     /* fewer LDOs; no codec or charger */
index fb194fe..0b73302 100644 (file)
@@ -74,6 +74,8 @@ struct sih {
        u8      edr_offset;
        u8      bytes_edr;              /* bytelen of EDR */
 
+       u8      irq_lines;              /* number of supported irq lines */
+
        /* SIR ignored -- set interrupt, for testing only */
        struct irq_data {
                u8      isr_offset;
@@ -82,6 +84,9 @@ struct sih {
        /* + 2 bytes padding */
 };
 
+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
 #define SIH_INITIALIZER(modname, nbits) \
        .module         = TWL4030_MODULE_ ## modname, \
        .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@@ -89,6 +94,7 @@ struct sih {
        .bytes_ixr      = DIV_ROUND_UP(nbits, 8), \
        .edr_offset     = TWL4030_ ## modname ## _EDR, \
        .bytes_edr      = DIV_ROUND_UP((2*(nbits)), 8), \
+       .irq_lines      = 2, \
        .mask = { { \
                .isr_offset     = TWL4030_ ## modname ## _ISR1, \
                .imr_offset     = TWL4030_ ## modname ## _IMR1, \
@@ -107,7 +113,8 @@ struct sih {
 /* Order in this table matches order in PIH_ISR.  That is,
  * BIT(n) in PIH_ISR is sih_modules[n].
  */
-static const struct sih sih_modules[6] = {
+/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
+static const struct sih sih_modules_twl4030[6] = {
        [0] = {
                .name           = "gpio",
                .module         = TWL4030_MODULE_GPIO,
@@ -118,6 +125,7 @@ static const struct sih sih_modules[6] = {
                /* Note: *all* of these IRQs default to no-trigger */
                .edr_offset     = REG_GPIO_EDR1,
                .bytes_edr      = 5,
+               .irq_lines      = 2,
                .mask = { {
                        .isr_offset     = REG_GPIO_ISR1A,
                        .imr_offset     = REG_GPIO_IMR1A,
@@ -140,6 +148,7 @@ static const struct sih sih_modules[6] = {
                .edr_offset     = TWL4030_INTERRUPTS_BCIEDR1,
                /* Note: most of these IRQs default to no-trigger */
                .bytes_edr      = 3,
+               .irq_lines      = 2,
                .mask = { {
                        .isr_offset     = TWL4030_INTERRUPTS_BCIISR1A,
                        .imr_offset     = TWL4030_INTERRUPTS_BCIIMR1A,
@@ -164,6 +173,99 @@ static const struct sih sih_modules[6] = {
                /* there are no SIH modules #6 or #7 ... */
 };
 
+static const struct sih sih_modules_twl5031[8] = {
+       [0] = {
+               .name           = "gpio",
+               .module         = TWL4030_MODULE_GPIO,
+               .control_offset = REG_GPIO_SIH_CTRL,
+               .set_cor        = true,
+               .bits           = TWL4030_GPIO_MAX,
+               .bytes_ixr      = 3,
+               /* Note: *all* of these IRQs default to no-trigger */
+               .edr_offset     = REG_GPIO_EDR1,
+               .bytes_edr      = 5,
+               .irq_lines      = 2,
+               .mask = { {
+                       .isr_offset     = REG_GPIO_ISR1A,
+                       .imr_offset     = REG_GPIO_IMR1A,
+               }, {
+                       .isr_offset     = REG_GPIO_ISR1B,
+                       .imr_offset     = REG_GPIO_IMR1B,
+               }, },
+       },
+       [1] = {
+               .name           = "keypad",
+               .set_cor        = true,
+               SIH_INITIALIZER(KEYPAD_KEYP, 4)
+       },
+       [2] = {
+               .name           = "bci",
+               .module         = TWL5031_MODULE_INTERRUPTS,
+               .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
+               .bits           = 7,
+               .bytes_ixr      = 1,
+               .edr_offset     = TWL5031_INTERRUPTS_BCIEDR1,
+               /* Note: most of these IRQs default to no-trigger */
+               .bytes_edr      = 2,
+               .irq_lines      = 2,
+               .mask = { {
+                       .isr_offset     = TWL5031_INTERRUPTS_BCIISR1,
+                       .imr_offset     = TWL5031_INTERRUPTS_BCIIMR1,
+               }, {
+                       .isr_offset     = TWL5031_INTERRUPTS_BCIISR2,
+                       .imr_offset     = TWL5031_INTERRUPTS_BCIIMR2,
+               }, },
+       },
+       [3] = {
+               .name           = "madc",
+               SIH_INITIALIZER(MADC, 4)
+       },
+       [4] = {
+               /* USB doesn't use the same SIH organization */
+               .name           = "usb",
+       },
+       [5] = {
+               .name           = "power",
+               .set_cor        = true,
+               SIH_INITIALIZER(INT_PWR, 8)
+       },
+       [6] = {
+               /*
+                * ACI doesn't use the same SIH organization.
+                * For example, it supports only one interrupt line
+                */
+               .name           = "aci",
+               .module         = TWL5031_MODULE_ACCESSORY,
+               .bits           = 9,
+               .bytes_ixr      = 2,
+               .irq_lines      = 1,
+               .mask = { {
+                       .isr_offset     = TWL5031_ACIIDR_LSB,
+                       .imr_offset     = TWL5031_ACIIMR_LSB,
+               }, },
+
+       },
+       [7] = {
+               /* Accessory */
+               .name           = "acc",
+               .module         = TWL5031_MODULE_ACCESSORY,
+               .control_offset = TWL5031_ACCSIHCTRL,
+               .bits           = 2,
+               .bytes_ixr      = 1,
+               .edr_offset     = TWL5031_ACCEDR1,
+               /* Note: most of these IRQs default to no-trigger */
+               .bytes_edr      = 1,
+               .irq_lines      = 2,
+               .mask = { {
+                       .isr_offset     = TWL5031_ACCISR1,
+                       .imr_offset     = TWL5031_ACCIMR1,
+               }, {
+                       .isr_offset     = TWL5031_ACCISR2,
+                       .imr_offset     = TWL5031_ACCIMR2,
+               }, },
+       },
+};
+
 #undef TWL4030_MODULE_KEYPAD_KEYP
 #undef TWL4030_MODULE_INT_PWR
 #undef TWL4030_INT_PWR_EDR
@@ -284,12 +386,16 @@ static int twl4030_init_sih_modules(unsigned line)
        /* disable all interrupts on our line */
        memset(buf, 0xff, sizeof buf);
        sih = sih_modules;
-       for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+       for (i = 0; i < nr_sih_modules; i++, sih++) {
 
                /* skip USB -- it's funky */
                if (!sih->bytes_ixr)
                        continue;
 
+               /* Not all the SIH modules support multiple interrupt lines */
+               if (sih->irq_lines <= line)
+                       continue;
+
                status = twl4030_i2c_write(sih->module, buf,
                                sih->mask[line].imr_offset, sih->bytes_ixr);
                if (status < 0)
@@ -314,7 +420,7 @@ static int twl4030_init_sih_modules(unsigned line)
        }
 
        sih = sih_modules;
-       for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+       for (i = 0; i < nr_sih_modules; i++, sih++) {
                u8 rxbuf[4];
                int j;
 
@@ -322,6 +428,10 @@ static int twl4030_init_sih_modules(unsigned line)
                if (!sih->bytes_ixr)
                        continue;
 
+               /* Not all the SIH modules support multiple interrupt lines */
+               if (sih->irq_lines <= line)
+                       continue;
+
                /* Clear pending interrupt status.  Either the read was
                 * enough, or we need to write those bits.  Repeat, in
                 * case an IRQ is pending (PENDDIS=0) ... that's not
@@ -611,7 +721,7 @@ int twl4030_sih_setup(int module)
 
        /* only support modules with standard clear-on-read for now */
        for (sih_mod = 0, sih = sih_modules;
-                       sih_mod < ARRAY_SIZE(sih_modules);
+                       sih_mod < nr_sih_modules;
                        sih_mod++, sih++) {
                if (sih->module == module && sih->set_cor) {
                        if (!WARN((irq_base + sih->bits) > NR_IRQS,
@@ -756,3 +866,16 @@ int twl_exit_irq(void)
        }
        return 0;
 }
+
+int twl_init_chip_irq(const char *chip)
+{
+       if (!strcmp(chip, "twl5031")) {
+               sih_modules = sih_modules_twl5031;
+               nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+       } else {
+               sih_modules = sih_modules_twl4030;
+               nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+       }
+
+       return 0;
+}
index 0c84cfa..efa62eb 100644 (file)
 #define TWL4030_MODULE_PWMA            0x0E
 #define TWL4030_MODULE_PWMB            0x0F
 
+#define TWL5031_MODULE_ACCESSORY       0x10
+#define TWL5031_MODULE_INTERRUPTS      0x11
+
 /* Slave 3 (i2c address 0x4b) */
-#define TWL4030_MODULE_BACKUP          0x10
-#define TWL4030_MODULE_INT             0x11
-#define TWL4030_MODULE_PM_MASTER       0x12
-#define TWL4030_MODULE_PM_RECEIVER     0x13
-#define TWL4030_MODULE_RTC             0x14
-#define TWL4030_MODULE_SECURED_REG     0x15
+#define TWL4030_MODULE_BACKUP          0x12
+#define TWL4030_MODULE_INT             0x13
+#define TWL4030_MODULE_PM_MASTER       0x14
+#define TWL4030_MODULE_PM_RECEIVER     0x15
+#define TWL4030_MODULE_RTC             0x16
+#define TWL4030_MODULE_SECURED_REG     0x17
 
 /*
  * Read and write single 8-bit registers
@@ -221,6 +224,38 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /*----------------------------------------------------------------------*/
 
+/*
+ * Accessory Interrupts
+ */
+#define TWL5031_ACIIMR_LSB             0x05
+#define TWL5031_ACIIMR_MSB             0x06
+#define TWL5031_ACIIDR_LSB             0x07
+#define TWL5031_ACIIDR_MSB             0x08
+#define TWL5031_ACCISR1                        0x0F
+#define TWL5031_ACCIMR1                        0x10
+#define TWL5031_ACCISR2                        0x11
+#define TWL5031_ACCIMR2                        0x12
+#define TWL5031_ACCSIR                 0x13
+#define TWL5031_ACCEDR1                        0x14
+#define TWL5031_ACCSIHCTRL             0x15
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery Charger Controller
+ */
+
+#define TWL5031_INTERRUPTS_BCIISR1     0x0
+#define TWL5031_INTERRUPTS_BCIIMR1     0x1
+#define TWL5031_INTERRUPTS_BCIISR2     0x2
+#define TWL5031_INTERRUPTS_BCIIMR2     0x3
+#define TWL5031_INTERRUPTS_BCISIR      0x4
+#define TWL5031_INTERRUPTS_BCIEDR1     0x5
+#define TWL5031_INTERRUPTS_BCIEDR2     0x6
+#define TWL5031_INTERRUPTS_BCISIHCTRL  0x7
+
+/*----------------------------------------------------------------------*/
+
 /* Power bus message definitions */
 
 /* The TWL4030/5030 splits its power-management resources (the various