clocksource: sh_tmu: __clocksource_updatefreq_hz() update
Magnus Damm [Mon, 25 Apr 2011 13:38:37 +0000 (22:38 +0900)]
This patch updates the clocksource part of the TMU driver
to make use of the __clocksource_updatefreq_hz() function.

Without this patch the old code uses clocksource_register()
together with a hack that assumes a never changing clock rate
(see clk_enable(), clk_get_rate() and clk_disable()).

The patch uses clocksource_register_hz() with 1 Hz as initial
value, then lets the ->enable() callback update the value
with __clocksource_updatefreq_hz() once the struct clk has
been enabled and the frequency is stable.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

drivers/clocksource/sh_tmu.c

index 36aba99..8081357 100644 (file)
@@ -199,8 +199,12 @@ static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
 static int sh_tmu_clocksource_enable(struct clocksource *cs)
 {
        struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
+       int ret;
 
-       return sh_tmu_enable(p);
+       ret = sh_tmu_enable(p);
+       if (!ret)
+               __clocksource_updatefreq_hz(cs, p->rate);
+       return ret;
 }
 
 static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -221,17 +225,10 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
        cs->mask = CLOCKSOURCE_MASK(32);
        cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-       /* clk_get_rate() needs an enabled clock */
-       clk_enable(p->clk);
-       /* channel will be configured at parent clock / 4 */
-       p->rate = clk_get_rate(p->clk) / 4;
-       clk_disable(p->clk);
-       /* TODO: calculate good shift from rate and counter bit width */
-       cs->shift = 10;
-       cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-
        dev_info(&p->pdev->dev, "used as clock source\n");
-       clocksource_register(cs);
+
+       /* Register with dummy 1 Hz value, gets updated in ->enable() */
+       clocksource_register_hz(cs, 1);
        return 0;
 }