[IA64-SGI] - New SN hardware support - use_alias_space
Jack Steiner [Thu, 11 Aug 2005 17:26:00 +0000 (10:26 -0700)]
Use local SHUB alias space when referencing MMRs that are known
to be node local. There is a slight performance benefit & code
simplification.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

arch/ia64/sn/kernel/irq.c
arch/ia64/sn/pci/pcibr/pcibr_dma.c

index af061db..607938c 100644 (file)
@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2005 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 #include <linux/irq.h>
@@ -76,16 +76,14 @@ static void sn_enable_irq(unsigned int irq)
 
 static void sn_ack_irq(unsigned int irq)
 {
-       uint64_t event_occurred, mask = 0;
-       int nasid;
+       u64 event_occurred, mask = 0;
 
        irq = irq & 0xff;
-       nasid = get_nasid();
        event_occurred =
-           HUB_L((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED));
+           HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
        mask = event_occurred & SH_ALL_INT_MASK;
-       HUB_S((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED_ALIAS),
-                mask);
+       HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
+             mask);
        __set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
 
        move_irq(irq);
@@ -93,15 +91,12 @@ static void sn_ack_irq(unsigned int irq)
 
 static void sn_end_irq(unsigned int irq)
 {
-       int nasid;
        int ivec;
-       uint64_t event_occurred;
+       u64 event_occurred;
 
        ivec = irq & 0xff;
        if (ivec == SGI_UART_VECTOR) {
-               nasid = get_nasid();
-               event_occurred = HUB_L((uint64_t *) GLOBAL_MMR_ADDR
-                                      (nasid, SH_EVENT_OCCURRED));
+               event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR (SH_EVENT_OCCURRED));
                /* If the UART bit is set here, we may have received an
                 * interrupt from the UART that the driver missed.  To
                 * make sure, we IPI ourselves to force us to look again.
index ae455b6..0f25425 100644 (file)
@@ -297,7 +297,7 @@ void sn_dma_flush(uint64_t addr)
                 * If CE ever needs the sn_dma_flush mechanism, we will have
                 * to account for that here and in tioce_bus_fixup().
                 */
-               uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID);
+               uint32_t tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
                uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id);
 
                /* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */