documentation: update header file paths
Randy Dunlap [Tue, 6 Jan 2009 22:42:41 +0000 (14:42 -0800)]
Update several Documentation/ files and a few sub-dir files (only one
change in each) to reflect changed header files locations.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/DMA-mapping.txt
Documentation/ioctl/ioctl-number.txt
Documentation/kernel-parameters.txt
Documentation/magic-number.txt
Documentation/mips/AU1xxx_IDE.README
Documentation/powerpc/cpu_features.txt
Documentation/x86/zero-page.txt

index c74fec8..b2a4d6d 100644 (file)
@@ -26,7 +26,7 @@ mapped only for the time they are actually used and unmapped after the DMA
 transfer.
 
 The following API will work of course even on platforms where no such
-hardware exists, see e.g. include/asm-i386/pci.h for how it is implemented on
+hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
 top of the virt_to_bus interface.
 
 First of all, you should make sure
index 8246991..f1d6399 100644 (file)
@@ -84,7 +84,7 @@ Code  Seq#    Include File            Comments
 'B'    C0-FF                           advanced bbus
                                        <mailto:maassen@uni-freiburg.de>
 'C'    all     linux/soundcard.h
-'D'    all     asm-s390/dasd.h
+'D'    all     arch/s390/include/asm/dasd.h
 'E'    all     linux/input.h
 'F'    all     linux/fb.h
 'H'    all     linux/hiddev.h
@@ -105,7 +105,7 @@ Code        Seq#    Include File            Comments
 'S'    80-81   scsi/scsi_ioctl.h       conflict!
 'S'    82-FF   scsi/scsi.h             conflict!
 'T'    all     linux/soundcard.h       conflict!
-'T'    all     asm-i386/ioctls.h       conflict!
+'T'    all     arch/x86/include/asm/ioctls.h   conflict!
 'U'    00-EF   linux/drivers/usb/usb.h
 'V'    all     linux/vt.h
 'W'    00-1F   linux/watchdog.h        conflict!
@@ -120,7 +120,7 @@ Code        Seq#    Include File            Comments
                                        <mailto:natalia@nikhefk.nikhef.nl>
 'c'    00-7F   linux/comstats.h        conflict!
 'c'    00-7F   linux/coda.h            conflict!
-'c'    80-9F   asm-s390/chsc.h
+'c'    80-9F   arch/s390/include/asm/chsc.h
 'd'    00-FF   linux/char/drm/drm/h    conflict!
 'd'    00-DF   linux/video_decoder.h   conflict!
 'd'    F0-FF   linux/digi1.h
@@ -170,7 +170,7 @@ Code        Seq#    Include File            Comments
                                        <mailto:oe@port.de>
 0x80   00-1F   linux/fb.h
 0x81   00-1F   linux/videotext.h
-0x89   00-06   asm-i386/sockios.h
+0x89   00-06   arch/x86/include/asm/sockios.h
 0x89   0B-DF   linux/sockios.h
 0x89   E0-EF   linux/sockios.h         SIOCPROTOPRIVATE range
 0x89   F0-FF   linux/sockios.h         SIOCDEVPRIVATE range
index a2d8805..7f0b694 100644 (file)
@@ -469,8 +469,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
        clearcpuid=BITNUM [X86]
                        Disable CPUID feature X for the kernel. See
-                       include/asm-x86/cpufeature.h for the valid bit numbers.
-                       Note the Linux specific bits are not necessarily
+                       arch/x86/include/asm/cpufeature.h for the valid bit
+                       numbers. Note the Linux specific bits are not necessarily
                        stable over kernel options, but the vendor specific
                        ones should be.
                        Also note that user programs calling CPUID directly
index 9507002..505f196 100644 (file)
@@ -125,14 +125,14 @@ TRIDENT_CARD_MAGIC    0x5072696E  trident_card      sound/oss/trident.c
 ROUTER_MAGIC          0x524d4157  wan_device        include/linux/wanrouter.h
 SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
-GDA_MAGIC             0x58464552  gda               include/asm-mips64/sn/gda.h
+GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
 RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
 STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
 EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
 HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
 EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
 PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
-KV_MAGIC              0x5f4b565f  kernel_vars_s     include/asm-mips64/sn/klkernvars.h
+KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
 I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
 TRIDENT_STATE_MAGIC   0x63657373  trient_state      sound/oss/trident.c
 M3_CARD_MAGIC         0x646e6f50  m3_card           sound/oss/maestro3.c
@@ -158,7 +158,7 @@ CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
 QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c
 QUEUE_MAGIC_USED      0xf7e1cc33  queue_entry       drivers/scsi/arm/queue.c
 HTB_CMAGIC            0xFEFAFEF1  htb_class         net/sched/sch_htb.c
-NMI_MAGIC             0x48414d4d455201 nmi_s        include/asm-mips64/sn/nmi.h
+NMI_MAGIC             0x48414d4d455201 nmi_s        arch/mips/include/asm/sn/nmi.h
 
 Note that there are also defined special per-driver magic numbers in sound
 memory management. See include/sound/sndmagic.h for complete list of them. Many
index 25a6ed1..f54962a 100644 (file)
@@ -44,7 +44,7 @@ FILES, CONFIGS AND COMPATABILITY
 
 Two files are introduced:
 
-  a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+  a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
      containes : struct _auide_hwif
                  timing parameters for PIO mode 0/1/2/3/4
                  timing parameters for MWDMA 0/1/2
index 4727398..ffa4183 100644 (file)
@@ -31,7 +31,7 @@ anyways).
 
 After detecting the processor type, the kernel patches out sections of code
 that shouldn't be used by writing nop's over it. Using cpufeatures requires
-just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S
+just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
 transfer_to_handler:
 
        #ifdef CONFIG_ALTIVEC
index 169ad42..4f91385 100644 (file)
@@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit
 real-mode setup code of the kernel. References/settings to it mainly
 are in:
 
-  include/asm-x86/bootparam.h
+  arch/x86/include/asm/bootparam.h
 
 
 Offset Proto   Name            Meaning