#include <linux/module.h>
#include <linux/timex.h>
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/syscalls.h>
static int firsttime = 1;
int error = 0;
+ if (tv && !timespec_valid(tv))
+ return -EINVAL;
+
error = security_settime(tv, tz);
if (error)
return error;
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
-long pps_offset; /* pps time offset (us) */
-long pps_jitter = MAXTIME; /* time dispersion (jitter) (us) */
-
-long pps_freq; /* frequency offset (scaled ppm) */
-long pps_stabil = MAXFREQ; /* frequency dispersion (scaled ppm) */
-
-long pps_valid = PPS_VALID; /* pps signal watchdog counter */
-
-int pps_shift = PPS_SHIFT; /* interval duration (s) (shift) */
-
-long pps_jitcnt; /* jitter limit exceeded */
-long pps_calcnt; /* calibration intervals */
-long pps_errcnt; /* calibration errors */
-long pps_stbcnt; /* stability limit exceeded */
-
-/* hook for a loadable hardpps kernel module */
-void (*hardpps_ptr)(struct timeval *);
-
/* we call this to notify the arch when the clock is being
* controlled. If no such arch routine, do nothing.
*/
result = -EINVAL;
goto leave;
}
- time_freq = txc->freq - pps_freq;
+ time_freq = txc->freq;
}
if (txc->modes & ADJ_MAXERROR) {
if ((time_next_adjust = txc->offset) == 0)
time_adjust = 0;
}
- else if ( time_status & (STA_PLL | STA_PPSTIME) ) {
- ltemp = (time_status & (STA_PPSTIME | STA_PPSSIGNAL)) ==
- (STA_PPSTIME | STA_PPSSIGNAL) ?
- pps_offset : txc->offset;
+ else if (time_status & STA_PLL) {
+ ltemp = txc->offset;
/*
* Scale the phase adjustment and
}
time_freq = min(time_freq, time_tolerance);
time_freq = max(time_freq, -time_tolerance);
- } /* STA_PLL || STA_PPSTIME */
+ } /* STA_PLL */
} /* txc->modes & ADJ_OFFSET */
if (txc->modes & ADJ_TICK) {
tick_usec = txc->tick;
tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
}
} /* txc->modes */
-leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0
- || ((time_status & (STA_PPSFREQ|STA_PPSTIME)) != 0
- && (time_status & STA_PPSSIGNAL) == 0)
- /* p. 24, (b) */
- || ((time_status & (STA_PPSTIME|STA_PPSJITTER))
- == (STA_PPSTIME|STA_PPSJITTER))
- /* p. 24, (c) */
- || ((time_status & STA_PPSFREQ) != 0
- && (time_status & (STA_PPSWANDER|STA_PPSERROR)) != 0))
- /* p. 24, (d) */
+leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
result = TIME_ERROR;
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
else {
txc->offset = shift_right(time_offset, SHIFT_UPDATE);
}
- txc->freq = time_freq + pps_freq;
+ txc->freq = time_freq;
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
txc->precision = time_precision;
txc->tolerance = time_tolerance;
txc->tick = tick_usec;
- txc->ppsfreq = pps_freq;
- txc->jitter = pps_jitter >> PPS_AVG;
- txc->shift = pps_shift;
- txc->stabil = pps_stabil;
- txc->jitcnt = pps_jitcnt;
- txc->calcnt = pps_calcnt;
- txc->errcnt = pps_errcnt;
- txc->stbcnt = pps_stbcnt;
+
+ /* PPS is not implemented, so these are zero */
+ txc->ppsfreq = 0;
+ txc->jitter = 0;
+ txc->shift = 0;
+ txc->stabil = 0;
+ txc->jitcnt = 0;
+ txc->calcnt = 0;
+ txc->errcnt = 0;
+ txc->stbcnt = 0;
write_sequnlock_irq(&xtime_lock);
do_gettimeofday(&txc->time);
notify_arch_cmos_timer();
* current_fs_time - Return FS time
* @sb: Superblock.
*
- * Return the current time truncated to the time granuality supported by
+ * Return the current time truncated to the time granularity supported by
* the fs.
*/
struct timespec current_fs_time(struct super_block *sb)
EXPORT_SYMBOL(current_fs_time);
/**
- * timespec_trunc - Truncate timespec to a granuality
+ * timespec_trunc - Truncate timespec to a granularity
* @t: Timespec
- * @gran: Granuality in ns.
+ * @gran: Granularity in ns.
*
- * Truncate a timespec to a granuality. gran must be smaller than a second.
+ * Truncate a timespec to a granularity. gran must be smaller than a second.
* Always rounds down.
*
* This function should be only used for timestamps returned by
#else
+#ifndef CONFIG_GENERIC_TIME
/*
* Simulate gettimeofday using do_gettimeofday which only allows a timeval
* and therefore only yields usec accuracy
}
EXPORT_SYMBOL_GPL(getnstimeofday);
#endif
-
-void getnstimestamp(struct timespec *ts)
-{
- unsigned int seq;
- struct timespec wall2mono;
-
- /* synchronize with settimeofday() changes */
- do {
- seq = read_seqbegin(&xtime_lock);
- getnstimeofday(ts);
- wall2mono = wall_to_monotonic;
- } while(unlikely(read_seqretry(&xtime_lock, seq)));
-
- /* adjust to monotonicaly-increasing values */
- ts->tv_sec += wall2mono.tv_sec;
- ts->tv_nsec += wall2mono.tv_nsec;
- while (unlikely(ts->tv_nsec >= NSEC_PER_SEC)) {
- ts->tv_nsec -= NSEC_PER_SEC;
- ts->tv_sec++;
- }
-}
-EXPORT_SYMBOL_GPL(getnstimestamp);
+#endif
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59
ts->tv_nsec = nsec;
}
+/**
+ * ns_to_timespec - Convert nanoseconds to timespec
+ * @nsec: the nanoseconds value to be converted
+ *
+ * Returns the timespec representation of the nsec parameter.
+ */
+struct timespec ns_to_timespec(const s64 nsec)
+{
+ struct timespec ts;
+
+ if (!nsec)
+ return (struct timespec) {0, 0};
+
+ ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC, &ts.tv_nsec);
+ if (unlikely(nsec < 0))
+ set_normalized_timespec(&ts, ts.tv_sec, ts.tv_nsec);
+
+ return ts;
+}
+
+/**
+ * ns_to_timeval - Convert nanoseconds to timeval
+ * @nsec: the nanoseconds value to be converted
+ *
+ * Returns the timeval representation of the nsec parameter.
+ */
+struct timeval ns_to_timeval(const s64 nsec)
+{
+ struct timespec ts = ns_to_timespec(nsec);
+ struct timeval tv;
+
+ tv.tv_sec = ts.tv_sec;
+ tv.tv_usec = (suseconds_t) ts.tv_nsec / 1000;
+
+ return tv;
+}
+
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void)
{
Code Review / linux-2.6.git / blobdiff