/*
* The timer bases:
*
- * Note: If we want to add new timer bases, we have to skip the two
- * clock ids captured by the cpu-timers. We do this by holding empty
- * entries rather than doing math adjustment of the clock ids.
- * This ensures that we capture erroneous accesses to these clock ids
- * rather than moving them into the range of valid clock id's.
+ * There are more clockids then hrtimer bases. Thus, we index
+ * into the timer bases by the hrtimer_base_type enum. When trying
+ * to reach a base using a clockid, hrtimer_clockid_to_base()
+ * is used to convert from clockid to the proper hrtimer_base_type.
*/
DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
{
.clock_base =
{
{
- .index = CLOCK_REALTIME,
+ .index = HRTIMER_BASE_MONOTONIC,
+ .clockid = CLOCK_MONOTONIC,
+ .get_time = &ktime_get,
+ .resolution = KTIME_LOW_RES,
+ },
+ {
+ .index = HRTIMER_BASE_REALTIME,
+ .clockid = CLOCK_REALTIME,
.get_time = &ktime_get_real,
.resolution = KTIME_LOW_RES,
},
{
- .index = CLOCK_MONOTONIC,
- .get_time = &ktime_get,
+ .index = HRTIMER_BASE_BOOTTIME,
+ .clockid = CLOCK_BOOTTIME,
+ .get_time = &ktime_get_boottime,
.resolution = KTIME_LOW_RES,
},
}
};
+static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
+ [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
+ [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
+ [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
+};
+
+static inline int hrtimer_clockid_to_base(clockid_t clock_id)
+{
+ return hrtimer_clock_to_base_table[clock_id];
+}
+
+
/*
* Get the coarse grained time at the softirq based on xtime and
* wall_to_monotonic.
*/
static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
{
- ktime_t xtim, tomono;
- struct timespec xts, tom;
- unsigned long seq;
+ ktime_t xtim, mono, boot;
+ struct timespec xts, tom, slp;
- do {
- seq = read_seqbegin(&xtime_lock);
- xts = current_kernel_time();
- tom = wall_to_monotonic;
- } while (read_seqretry(&xtime_lock, seq));
+ get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
xtim = timespec_to_ktime(xts);
- tomono = timespec_to_ktime(tom);
- base->clock_base[CLOCK_REALTIME].softirq_time = xtim;
- base->clock_base[CLOCK_MONOTONIC].softirq_time =
- ktime_add(xtim, tomono);
+ mono = ktime_add(xtim, timespec_to_ktime(tom));
+ boot = ktime_add(mono, timespec_to_ktime(slp));
+ base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
+ base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
+ base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
}
/*
for (;;) {
base = timer->base;
if (likely(base != NULL)) {
- spin_lock_irqsave(&base->cpu_base->lock, *flags);
+ raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
if (likely(base == timer->base))
return base;
/* The timer has migrated to another CPU: */
- spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
+ raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
}
cpu_relax();
}
static int hrtimer_get_target(int this_cpu, int pinned)
{
#ifdef CONFIG_NO_HZ
- if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
- int preferred_cpu = get_nohz_load_balancer();
-
- if (preferred_cpu >= 0)
- return preferred_cpu;
- }
+ if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
+ return get_nohz_timer_target();
#endif
return this_cpu;
}
struct hrtimer_cpu_base *new_cpu_base;
int this_cpu = smp_processor_id();
int cpu = hrtimer_get_target(this_cpu, pinned);
+ int basenum = base->index;
again:
new_cpu_base = &per_cpu(hrtimer_bases, cpu);
- new_base = &new_cpu_base->clock_base[base->index];
+ new_base = &new_cpu_base->clock_base[basenum];
if (base != new_base) {
/*
/* See the comment in lock_timer_base() */
timer->base = NULL;
- spin_unlock(&base->cpu_base->lock);
- spin_lock(&new_base->cpu_base->lock);
+ raw_spin_unlock(&base->cpu_base->lock);
+ raw_spin_lock(&new_base->cpu_base->lock);
if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
cpu = this_cpu;
- spin_unlock(&new_base->cpu_base->lock);
- spin_lock(&base->cpu_base->lock);
+ raw_spin_unlock(&new_base->cpu_base->lock);
+ raw_spin_lock(&base->cpu_base->lock);
timer->base = base;
goto again;
}
{
struct hrtimer_clock_base *base = timer->base;
- spin_lock_irqsave(&base->cpu_base->lock, *flags);
+ raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
return base;
}
static struct debug_obj_descr hrtimer_debug_descr;
+static void *hrtimer_debug_hint(void *addr)
+{
+ return ((struct hrtimer *) addr)->function;
+}
+
/*
* fixup_init is called when:
* - an active object is initialized
static struct debug_obj_descr hrtimer_debug_descr = {
.name = "hrtimer",
+ .debug_hint = hrtimer_debug_hint,
.fixup_init = hrtimer_fixup_init,
.fixup_activate = hrtimer_fixup_activate,
.fixup_free = hrtimer_fixup_free,
*/
static inline int hrtimer_hres_active(void)
{
- return __get_cpu_var(hrtimer_bases).hres_active;
+ return __this_cpu_read(hrtimer_bases.hres_active);
}
/*
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
struct hrtimer *timer;
+ struct timerqueue_node *next;
- if (!base->first)
+ next = timerqueue_getnext(&base->active);
+ if (!next)
continue;
- timer = rb_entry(base->first, struct hrtimer, node);
+ timer = container_of(next, struct hrtimer, node);
+
expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
/*
* clock_was_set() has changed base->offset so the
static int hrtimer_reprogram(struct hrtimer *timer,
struct hrtimer_clock_base *base)
{
- ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
int res;
if (expires.tv64 < 0)
return -ETIME;
- if (expires.tv64 >= expires_next->tv64)
+ if (expires.tv64 >= cpu_base->expires_next.tv64)
+ return 0;
+
+ /*
+ * If a hang was detected in the last timer interrupt then we
+ * do not schedule a timer which is earlier than the expiry
+ * which we enforced in the hang detection. We want the system
+ * to make progress.
+ */
+ if (cpu_base->hang_detected)
return 0;
/*
*/
res = tick_program_event(expires, 0);
if (!IS_ERR_VALUE(res))
- *expires_next = expires;
+ cpu_base->expires_next = expires;
return res;
}
-
-/*
- * Retrigger next event is called after clock was set
- *
- * Called with interrupts disabled via on_each_cpu()
- */
-static void retrigger_next_event(void *arg)
-{
- struct hrtimer_cpu_base *base;
- struct timespec realtime_offset;
- unsigned long seq;
-
- if (!hrtimer_hres_active())
- return;
-
- do {
- seq = read_seqbegin(&xtime_lock);
- set_normalized_timespec(&realtime_offset,
- -wall_to_monotonic.tv_sec,
- -wall_to_monotonic.tv_nsec);
- } while (read_seqretry(&xtime_lock, seq));
-
- base = &__get_cpu_var(hrtimer_bases);
-
- /* Adjust CLOCK_REALTIME offset */
- spin_lock(&base->lock);
- base->clock_base[CLOCK_REALTIME].offset =
- timespec_to_ktime(realtime_offset);
-
- hrtimer_force_reprogram(base, 0);
- spin_unlock(&base->lock);
-}
-
-/*
- * Clock realtime was set
- *
- * Change the offset of the realtime clock vs. the monotonic
- * clock.
- *
- * We might have to reprogram the high resolution timer interrupt. On
- * SMP we call the architecture specific code to retrigger _all_ high
- * resolution timer interrupts. On UP we just disable interrupts and
- * call the high resolution interrupt code.
- */
-void clock_was_set(void)
-{
- /* Retrigger the CPU local events everywhere */
- on_each_cpu(retrigger_next_event, NULL, 1);
-}
-
-/*
- * During resume we might have to reprogram the high resolution timer
- * interrupt (on the local CPU):
- */
-void hres_timers_resume(void)
-{
- WARN_ONCE(!irqs_disabled(),
- KERN_INFO "hres_timers_resume() called with IRQs enabled!");
-
- retrigger_next_event(NULL);
-}
-
/*
* Initialize the high resolution related parts of cpu_base
*/
base->hres_active = 0;
}
-/*
- * Initialize the high resolution related parts of a hrtimer
- */
-static inline void hrtimer_init_timer_hres(struct hrtimer *timer)
-{
-}
-
-
/*
* When High resolution timers are active, try to reprogram. Note, that in case
* the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
{
if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
if (wakeup) {
- spin_unlock(&base->cpu_base->lock);
+ raw_spin_unlock(&base->cpu_base->lock);
raise_softirq_irqoff(HRTIMER_SOFTIRQ);
- spin_lock(&base->cpu_base->lock);
+ raw_spin_lock(&base->cpu_base->lock);
} else
__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
return 0;
}
+/*
+ * Retrigger next event is called after clock was set
+ *
+ * Called with interrupts disabled via on_each_cpu()
+ */
+static void retrigger_next_event(void *arg)
+{
+ struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
+ struct timespec realtime_offset, xtim, wtm, sleep;
+
+ if (!hrtimer_hres_active())
+ return;
+
+ /* Optimized out for !HIGH_RES */
+ get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
+ set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
+
+ /* Adjust CLOCK_REALTIME offset */
+ raw_spin_lock(&base->lock);
+ base->clock_base[HRTIMER_BASE_REALTIME].offset =
+ timespec_to_ktime(realtime_offset);
+ base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
+ timespec_to_ktime(sleep);
+
+ hrtimer_force_reprogram(base, 0);
+ raw_spin_unlock(&base->lock);
+}
+
/*
* Switch to high resolution mode
*/
static int hrtimer_switch_to_hres(void)
{
- int cpu = smp_processor_id();
+ int i, cpu = smp_processor_id();
struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
unsigned long flags;
return 0;
}
base->hres_active = 1;
- base->clock_base[CLOCK_REALTIME].resolution = KTIME_HIGH_RES;
- base->clock_base[CLOCK_MONOTONIC].resolution = KTIME_HIGH_RES;
+ for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
+ base->clock_base[i].resolution = KTIME_HIGH_RES;
tick_setup_sched_timer();
return 0;
}
static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
-static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { }
+static inline void retrigger_next_event(void *arg) { }
#endif /* CONFIG_HIGH_RES_TIMERS */
-#ifdef CONFIG_TIMER_STATS
-void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer, void *addr)
+/*
+ * Clock realtime was set
+ *
+ * Change the offset of the realtime clock vs. the monotonic
+ * clock.
+ *
+ * We might have to reprogram the high resolution timer interrupt. On
+ * SMP we call the architecture specific code to retrigger _all_ high
+ * resolution timer interrupts. On UP we just disable interrupts and
+ * call the high resolution interrupt code.
+ */
+void clock_was_set(void)
{
+#ifdef CONFIG_HIGH_RES_TIMERS
+ /* Retrigger the CPU local events everywhere */
+ on_each_cpu(retrigger_next_event, NULL, 1);
+#endif
+ timerfd_clock_was_set();
+}
+
+/*
+ * During resume we might have to reprogram the high resolution timer
+ * interrupt (on the local CPU):
+ */
+void hrtimers_resume(void)
+{
+ WARN_ONCE(!irqs_disabled(),
+ KERN_INFO "hrtimers_resume() called with IRQs enabled!");
+
+ retrigger_next_event(NULL);
+ timerfd_clock_was_set();
+}
+
+static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
+{
+#ifdef CONFIG_TIMER_STATS
if (timer->start_site)
return;
-
- timer->start_site = addr;
+ timer->start_site = __builtin_return_address(0);
memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
timer->start_pid = current->pid;
+#endif
}
+
+static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
+{
+#ifdef CONFIG_TIMER_STATS
+ timer->start_site = NULL;
#endif
+}
+
+static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
+{
+#ifdef CONFIG_TIMER_STATS
+ if (likely(!timer_stats_active))
+ return;
+ timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
+ timer->function, timer->start_comm, 0);
+#endif
+}
/*
* Counterpart to lock_hrtimer_base above:
static inline
void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
{
- spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
+ raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
}
/**
static int enqueue_hrtimer(struct hrtimer *timer,
struct hrtimer_clock_base *base)
{
- struct rb_node **link = &base->active.rb_node;
- struct rb_node *parent = NULL;
- struct hrtimer *entry;
- int leftmost = 1;
-
debug_activate(timer);
- /*
- * Find the right place in the rbtree:
- */
- while (*link) {
- parent = *link;
- entry = rb_entry(parent, struct hrtimer, node);
- /*
- * We dont care about collisions. Nodes with
- * the same expiry time stay together.
- */
- if (hrtimer_get_expires_tv64(timer) <
- hrtimer_get_expires_tv64(entry)) {
- link = &(*link)->rb_left;
- } else {
- link = &(*link)->rb_right;
- leftmost = 0;
- }
- }
+ timerqueue_add(&base->active, &timer->node);
+ base->cpu_base->active_bases |= 1 << base->index;
- /*
- * Insert the timer to the rbtree and check whether it
- * replaces the first pending timer
- */
- if (leftmost)
- base->first = &timer->node;
-
- rb_link_node(&timer->node, parent, link);
- rb_insert_color(&timer->node, &base->active);
/*
* HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
* state of a possibly running callback.
*/
timer->state |= HRTIMER_STATE_ENQUEUED;
- return leftmost;
+ return (&timer->node == base->active.next);
}
/*
if (!(timer->state & HRTIMER_STATE_ENQUEUED))
goto out;
- /*
- * Remove the timer from the rbtree and replace the first
- * entry pointer if necessary.
- */
- if (base->first == &timer->node) {
- base->first = rb_next(&timer->node);
+ if (&timer->node == timerqueue_getnext(&base->active)) {
#ifdef CONFIG_HIGH_RES_TIMERS
/* Reprogram the clock event device. if enabled */
if (reprogram && hrtimer_hres_active()) {
}
#endif
}
- rb_erase(&timer->node, &base->active);
+ timerqueue_del(&base->active, &timer->node);
+ if (!timerqueue_getnext(&base->active))
+ base->cpu_base->active_bases &= ~(1 << base->index);
out:
timer->state = newstate;
}
remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
{
if (hrtimer_is_queued(timer)) {
+ unsigned long state;
int reprogram;
/*
debug_deactivate(timer);
timer_stats_hrtimer_clear_start_info(timer);
reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
- __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE,
- reprogram);
+ /*
+ * We must preserve the CALLBACK state flag here,
+ * otherwise we could move the timer base in
+ * switch_hrtimer_base.
+ */
+ state = timer->state & HRTIMER_STATE_CALLBACK;
+ __remove_hrtimer(timer, base, state, reprogram);
return 1;
}
return 0;
*/
ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
{
- struct hrtimer_clock_base *base;
unsigned long flags;
ktime_t rem;
- base = lock_hrtimer_base(timer, &flags);
+ lock_hrtimer_base(timer, &flags);
rem = hrtimer_expires_remaining(timer);
unlock_hrtimer_base(timer, &flags);
unsigned long flags;
int i;
- spin_lock_irqsave(&cpu_base->lock, flags);
+ raw_spin_lock_irqsave(&cpu_base->lock, flags);
if (!hrtimer_hres_active()) {
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
struct hrtimer *timer;
+ struct timerqueue_node *next;
- if (!base->first)
+ next = timerqueue_getnext(&base->active);
+ if (!next)
continue;
- timer = rb_entry(base->first, struct hrtimer, node);
+ timer = container_of(next, struct hrtimer, node);
delta.tv64 = hrtimer_get_expires_tv64(timer);
delta = ktime_sub(delta, base->get_time());
if (delta.tv64 < mindelta.tv64)
}
}
- spin_unlock_irqrestore(&cpu_base->lock, flags);
+ raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
if (mindelta.tv64 < 0)
mindelta.tv64 = 0;
enum hrtimer_mode mode)
{
struct hrtimer_cpu_base *cpu_base;
+ int base;
memset(timer, 0, sizeof(struct hrtimer));
if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
clock_id = CLOCK_MONOTONIC;
- timer->base = &cpu_base->clock_base[clock_id];
- hrtimer_init_timer_hres(timer);
+ base = hrtimer_clockid_to_base(clock_id);
+ timer->base = &cpu_base->clock_base[base];
+ timerqueue_init(&timer->node);
#ifdef CONFIG_TIMER_STATS
timer->start_site = NULL;
int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
{
struct hrtimer_cpu_base *cpu_base;
+ int base = hrtimer_clockid_to_base(which_clock);
cpu_base = &__raw_get_cpu_var(hrtimer_bases);
- *tp = ktime_to_timespec(cpu_base->clock_base[which_clock].resolution);
+ *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
return 0;
}
* they get migrated to another cpu, therefore its safe to unlock
* the timer base.
*/
- spin_unlock(&cpu_base->lock);
+ raw_spin_unlock(&cpu_base->lock);
trace_hrtimer_expire_entry(timer, now);
restart = fn(timer);
trace_hrtimer_expire_exit(timer);
- spin_lock(&cpu_base->lock);
+ raw_spin_lock(&cpu_base->lock);
/*
* Note: We clear the CALLBACK bit after enqueue_hrtimer and
BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
enqueue_hrtimer(timer, base);
}
+
+ WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK));
+
timer->state &= ~HRTIMER_STATE_CALLBACK;
}
#ifdef CONFIG_HIGH_RES_TIMERS
-static int force_clock_reprogram;
-
-/*
- * After 5 iteration's attempts, we consider that hrtimer_interrupt()
- * is hanging, which could happen with something that slows the interrupt
- * such as the tracing. Then we force the clock reprogramming for each future
- * hrtimer interrupts to avoid infinite loops and use the min_delta_ns
- * threshold that we will overwrite.
- * The next tick event will be scheduled to 3 times we currently spend on
- * hrtimer_interrupt(). This gives a good compromise, the cpus will spend
- * 1/4 of their time to process the hrtimer interrupts. This is enough to
- * let it running without serious starvation.
- */
-
-static inline void
-hrtimer_interrupt_hanging(struct clock_event_device *dev,
- ktime_t try_time)
-{
- force_clock_reprogram = 1;
- dev->min_delta_ns = (unsigned long)try_time.tv64 * 3;
- printk(KERN_WARNING "hrtimer: interrupt too slow, "
- "forcing clock min delta to %lu ns\n", dev->min_delta_ns);
-}
/*
* High resolution timer interrupt
* Called with interrupts disabled
void hrtimer_interrupt(struct clock_event_device *dev)
{
struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
- struct hrtimer_clock_base *base;
- ktime_t expires_next, now;
- int nr_retries = 0;
- int i;
+ ktime_t expires_next, now, entry_time, delta;
+ int i, retries = 0;
BUG_ON(!cpu_base->hres_active);
cpu_base->nr_events++;
dev->next_event.tv64 = KTIME_MAX;
- retry:
- /* 5 retries is enough to notice a hang */
- if (!(++nr_retries % 5))
- hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now));
-
- now = ktime_get();
-
+ entry_time = now = ktime_get();
+retry:
expires_next.tv64 = KTIME_MAX;
- spin_lock(&cpu_base->lock);
+ raw_spin_lock(&cpu_base->lock);
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
*/
cpu_base->expires_next.tv64 = KTIME_MAX;
- base = cpu_base->clock_base;
-
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
+ struct hrtimer_clock_base *base;
+ struct timerqueue_node *node;
ktime_t basenow;
- struct rb_node *node;
+ if (!(cpu_base->active_bases & (1 << i)))
+ continue;
+
+ base = cpu_base->clock_base + i;
basenow = ktime_add(now, base->offset);
- while ((node = base->first)) {
+ while ((node = timerqueue_getnext(&base->active))) {
struct hrtimer *timer;
- timer = rb_entry(node, struct hrtimer, node);
+ timer = container_of(node, struct hrtimer, node);
/*
* The immediate goal for using the softexpires is
__run_hrtimer(timer, &basenow);
}
- base++;
}
/*
* against it.
*/
cpu_base->expires_next = expires_next;
- spin_unlock(&cpu_base->lock);
+ raw_spin_unlock(&cpu_base->lock);
/* Reprogramming necessary ? */
- if (expires_next.tv64 != KTIME_MAX) {
- if (tick_program_event(expires_next, force_clock_reprogram))
- goto retry;
+ if (expires_next.tv64 == KTIME_MAX ||
+ !tick_program_event(expires_next, 0)) {
+ cpu_base->hang_detected = 0;
+ return;
}
+
+ /*
+ * The next timer was already expired due to:
+ * - tracing
+ * - long lasting callbacks
+ * - being scheduled away when running in a VM
+ *
+ * We need to prevent that we loop forever in the hrtimer
+ * interrupt routine. We give it 3 attempts to avoid
+ * overreacting on some spurious event.
+ */
+ now = ktime_get();
+ cpu_base->nr_retries++;
+ if (++retries < 3)
+ goto retry;
+ /*
+ * Give the system a chance to do something else than looping
+ * here. We stored the entry time, so we know exactly how long
+ * we spent here. We schedule the next event this amount of
+ * time away.
+ */
+ cpu_base->nr_hangs++;
+ cpu_base->hang_detected = 1;
+ delta = ktime_sub(now, entry_time);
+ if (delta.tv64 > cpu_base->max_hang_time.tv64)
+ cpu_base->max_hang_time = delta;
+ /*
+ * Limit it to a sensible value as we enforce a longer
+ * delay. Give the CPU at least 100ms to catch up.
+ */
+ if (delta.tv64 > 100 * NSEC_PER_MSEC)
+ expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
+ else
+ expires_next = ktime_add(now, delta);
+ tick_program_event(expires_next, 1);
+ printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n",
+ ktime_to_ns(delta));
}
/*
*/
void hrtimer_run_queues(void)
{
- struct rb_node *node;
+ struct timerqueue_node *node;
struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
struct hrtimer_clock_base *base;
int index, gettime = 1;
for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
base = &cpu_base->clock_base[index];
-
- if (!base->first)
+ if (!timerqueue_getnext(&base->active))
continue;
if (gettime) {
gettime = 0;
}
- spin_lock(&cpu_base->lock);
+ raw_spin_lock(&cpu_base->lock);
- while ((node = base->first)) {
+ while ((node = timerqueue_getnext(&base->active))) {
struct hrtimer *timer;
- timer = rb_entry(node, struct hrtimer, node);
+ timer = container_of(node, struct hrtimer, node);
if (base->softirq_time.tv64 <=
hrtimer_get_expires_tv64(timer))
break;
__run_hrtimer(timer, &base->softirq_time);
}
- spin_unlock(&cpu_base->lock);
+ raw_spin_unlock(&cpu_base->lock);
}
}
struct timespec __user *rmtp;
int ret = 0;
- hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
+ hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
HRTIMER_MODE_ABS);
hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
restart = ¤t_thread_info()->restart_block;
restart->fn = hrtimer_nanosleep_restart;
- restart->nanosleep.index = t.timer.base->index;
+ restart->nanosleep.clockid = t.timer.base->clockid;
restart->nanosleep.rmtp = rmtp;
restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
int i;
- spin_lock_init(&cpu_base->lock);
+ raw_spin_lock_init(&cpu_base->lock);
- for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
+ for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
cpu_base->clock_base[i].cpu_base = cpu_base;
+ timerqueue_init_head(&cpu_base->clock_base[i].active);
+ }
hrtimer_init_hres(cpu_base);
}
struct hrtimer_clock_base *new_base)
{
struct hrtimer *timer;
- struct rb_node *node;
+ struct timerqueue_node *node;
- while ((node = rb_first(&old_base->active))) {
- timer = rb_entry(node, struct hrtimer, node);
+ while ((node = timerqueue_getnext(&old_base->active))) {
+ timer = container_of(node, struct hrtimer, node);
BUG_ON(hrtimer_callback_running(timer));
debug_deactivate(timer);
* The caller is globally serialized and nobody else
* takes two locks at once, deadlock is not possible.
*/
- spin_lock(&new_base->lock);
- spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
+ raw_spin_lock(&new_base->lock);
+ raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
migrate_hrtimer_list(&old_base->clock_base[i],
&new_base->clock_base[i]);
}
- spin_unlock(&old_base->lock);
- spin_unlock(&new_base->lock);
+ raw_spin_unlock(&old_base->lock);
+ raw_spin_unlock(&new_base->lock);
/* Check, if we got expired work to do */
__hrtimer_peek_ahead_timers();
}
/**
- * schedule_hrtimeout_range - sleep until timeout
+ * schedule_hrtimeout_range_clock - sleep until timeout
* @expires: timeout value (ktime_t)
* @delta: slack in expires timeout (ktime_t)
* @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
- *
- * Make the current task sleep until the given expiry time has
- * elapsed. The routine will return immediately unless
- * the current task state has been set (see set_current_state()).
- *
- * The @delta argument gives the kernel the freedom to schedule the
- * actual wakeup to a time that is both power and performance friendly.
- * The kernel give the normal best effort behavior for "@expires+@delta",
- * but may decide to fire the timer earlier, but no earlier than @expires.
- *
- * You can set the task state as follows -
- *
- * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
- * pass before the routine returns.
- *
- * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
- * delivered to the current task.
- *
- * The current task state is guaranteed to be TASK_RUNNING when this
- * routine returns.
- *
- * Returns 0 when the timer has expired otherwise -EINTR
+ * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME
*/
-int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
- const enum hrtimer_mode mode)
+int __sched
+schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta,
+ const enum hrtimer_mode mode, int clock)
{
struct hrtimer_sleeper t;
}
/*
- * A NULL parameter means "inifinte"
+ * A NULL parameter means "infinite"
*/
if (!expires) {
schedule();
return -EINTR;
}
- hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
+ hrtimer_init_on_stack(&t.timer, clock, mode);
hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
hrtimer_init_sleeper(&t, current);
return !t.task ? 0 : -EINTR;
}
+
+/**
+ * schedule_hrtimeout_range - sleep until timeout
+ * @expires: timeout value (ktime_t)
+ * @delta: slack in expires timeout (ktime_t)
+ * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
+ *
+ * Make the current task sleep until the given expiry time has
+ * elapsed. The routine will return immediately unless
+ * the current task state has been set (see set_current_state()).
+ *
+ * The @delta argument gives the kernel the freedom to schedule the
+ * actual wakeup to a time that is both power and performance friendly.
+ * The kernel give the normal best effort behavior for "@expires+@delta",
+ * but may decide to fire the timer earlier, but no earlier than @expires.
+ *
+ * You can set the task state as follows -
+ *
+ * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
+ * pass before the routine returns.
+ *
+ * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
+ * delivered to the current task.
+ *
+ * The current task state is guaranteed to be TASK_RUNNING when this
+ * routine returns.
+ *
+ * Returns 0 when the timer has expired otherwise -EINTR
+ */
+int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+ const enum hrtimer_mode mode)
+{
+ return schedule_hrtimeout_range_clock(expires, delta, mode,
+ CLOCK_MONOTONIC);
+}
EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
/**