ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
[linux-2.6.git] / fs / ext3 / super.c
index 601e881..1c68751 100644 (file)
@@ -135,12 +135,24 @@ void ext3_journal_abort_handle(const char *caller, const char *err_fn,
        if (is_handle_aborted(handle))
                return;
 
-       printk(KERN_ERR "%s: aborting transaction: %s in %s\n",
-              caller, errstr, err_fn);
+       printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n",
+               caller, errstr, err_fn);
 
        journal_abort_handle(handle);
 }
 
+void ext3_msg(struct super_block *sb, const char *prefix,
+               const char *fmt, ...)
+{
+       va_list args;
+
+       va_start(args, fmt);
+       printk("%sEXT3-fs (%s): ", prefix, sb->s_id);
+       vprintk(fmt, args);
+       printk("\n");
+       va_end(args);
+}
+
 /* Deal with the reporting of failure conditions on a filesystem such as
  * inconsistencies detected or read IO failures.
  *
@@ -152,7 +164,7 @@ void ext3_journal_abort_handle(const char *caller, const char *err_fn,
  * write out the superblock safely.
  *
  * We'll just use the journal_abort() error code to record an error in
- * the journal instead.  On recovery, the journal will compain about
+ * the journal instead.  On recovery, the journal will complain about
  * that error until we've noted it down and cleared it.
  */
 
@@ -169,17 +181,18 @@ static void ext3_handle_error(struct super_block *sb)
        if (!test_opt (sb, ERRORS_CONT)) {
                journal_t *journal = EXT3_SB(sb)->s_journal;
 
-               EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
+               set_opt(EXT3_SB(sb)->s_mount_opt, ABORT);
                if (journal)
                        journal_abort(journal, -EIO);
        }
        if (test_opt (sb, ERRORS_RO)) {
-               printk (KERN_CRIT "Remounting filesystem read-only\n");
+               ext3_msg(sb, KERN_CRIT,
+                       "error: remounting filesystem read-only");
                sb->s_flags |= MS_RDONLY;
        }
        ext3_commit_super(sb, es, 1);
        if (test_opt(sb, ERRORS_PANIC))
-               panic("EXT3-fs (device %s): panic forced after error\n",
+               panic("EXT3-fs (%s): panic forced after error\n",
                        sb->s_id);
 }
 
@@ -247,8 +260,7 @@ void __ext3_std_error (struct super_block * sb, const char * function,
                return;
 
        errstr = ext3_decode_error(sb, errno, nbuf);
-       printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
-               sb->s_id, function, errstr);
+       ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr);
 
        ext3_handle_error(sb);
 }
@@ -268,24 +280,23 @@ void ext3_abort (struct super_block * sb, const char * function,
 {
        va_list args;
 
-       printk (KERN_CRIT "ext3_abort called.\n");
-
        va_start(args, fmt);
-       printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+       printk(KERN_CRIT "EXT3-fs (%s): error: %s: ", sb->s_id, function);
        vprintk(fmt, args);
        printk("\n");
        va_end(args);
 
        if (test_opt(sb, ERRORS_PANIC))
-               panic("EXT3-fs panic from previous error\n");
+               panic("EXT3-fs: panic from previous error\n");
 
        if (sb->s_flags & MS_RDONLY)
                return;
 
-       printk(KERN_CRIT "Remounting filesystem read-only\n");
+       ext3_msg(sb, KERN_CRIT,
+               "error: remounting filesystem read-only");
        EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
        sb->s_flags |= MS_RDONLY;
-       EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
+       set_opt(EXT3_SB(sb)->s_mount_opt, ABORT);
        if (EXT3_SB(sb)->s_journal)
                journal_abort(EXT3_SB(sb)->s_journal, -EIO);
 }
@@ -296,7 +307,7 @@ void ext3_warning (struct super_block * sb, const char * function,
        va_list args;
 
        va_start(args, fmt);
-       printk(KERN_WARNING "EXT3-fs warning (device %s): %s: ",
+       printk(KERN_WARNING "EXT3-fs (%s): warning: %s: ",
               sb->s_id, function);
        vprintk(fmt, args);
        printk("\n");
@@ -310,10 +321,10 @@ void ext3_update_dynamic_rev(struct super_block *sb)
        if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
                return;
 
-       ext3_warning(sb, __func__,
-                    "updating to rev %d because of new feature flag, "
-                    "running e2fsck is recommended",
-                    EXT3_DYNAMIC_REV);
+       ext3_msg(sb, KERN_WARNING,
+               "warning: updating to rev %d because of "
+               "new feature flag, running e2fsck is recommended",
+               EXT3_DYNAMIC_REV);
 
        es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
        es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
@@ -331,7 +342,7 @@ void ext3_update_dynamic_rev(struct super_block *sb)
 /*
  * Open the external journal device
  */
-static struct block_device *ext3_blkdev_get(dev_t dev)
+static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb)
 {
        struct block_device *bdev;
        char b[BDEVNAME_SIZE];
@@ -342,8 +353,9 @@ static struct block_device *ext3_blkdev_get(dev_t dev)
        return bdev;
 
 fail:
-       printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n",
-                       __bdevname(dev, b), PTR_ERR(bdev));
+       ext3_msg(sb, "error: failed to open journal device %s: %ld",
+               __bdevname(dev, b), PTR_ERR(bdev));
+
        return NULL;
 }
 
@@ -378,13 +390,13 @@ static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi)
 {
        struct list_head *l;
 
-       printk(KERN_ERR "sb orphan head is %d\n",
+       ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d",
               le32_to_cpu(sbi->s_es->s_last_orphan));
 
-       printk(KERN_ERR "sb_info orphan list:\n");
+       ext3_msg(sb, KERN_ERR, "sb_info orphan list:");
        list_for_each(l, &sbi->s_orphan) {
                struct inode *inode = orphan_list_entry(l);
-               printk(KERN_ERR "  "
+               ext3_msg(sb, KERN_ERR, "  "
                       "inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
                       inode->i_sb->s_id, inode->i_ino, inode,
                       inode->i_mode, inode->i_nlink,
@@ -398,6 +410,8 @@ static void ext3_put_super (struct super_block * sb)
        struct ext3_super_block *es = sbi->s_es;
        int i, err;
 
+       dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
        lock_kernel();
 
        ext3_xattr_put_super(sb);
@@ -464,12 +478,10 @@ static struct inode *ext3_alloc_inode(struct super_block *sb)
        ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS);
        if (!ei)
                return NULL;
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
-       ei->i_acl = EXT3_ACL_NOT_CACHED;
-       ei->i_default_acl = EXT3_ACL_NOT_CACHED;
-#endif
        ei->i_block_alloc_info = NULL;
        ei->vfs_inode.i_version = 1;
+       atomic_set(&ei->i_datasync_tid, 0);
+       atomic_set(&ei->i_sync_tid, 0);
        return &ei->vfs_inode;
 }
 
@@ -515,35 +527,27 @@ static void destroy_inodecache(void)
        kmem_cache_destroy(ext3_inode_cachep);
 }
 
-static void ext3_clear_inode(struct inode *inode)
-{
-       struct ext3_block_alloc_info *rsv = EXT3_I(inode)->i_block_alloc_info;
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
-       if (EXT3_I(inode)->i_acl &&
-                       EXT3_I(inode)->i_acl != EXT3_ACL_NOT_CACHED) {
-               posix_acl_release(EXT3_I(inode)->i_acl);
-               EXT3_I(inode)->i_acl = EXT3_ACL_NOT_CACHED;
-       }
-       if (EXT3_I(inode)->i_default_acl &&
-                       EXT3_I(inode)->i_default_acl != EXT3_ACL_NOT_CACHED) {
-               posix_acl_release(EXT3_I(inode)->i_default_acl);
-               EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED;
-       }
-#endif
-       ext3_discard_reservation(inode);
-       EXT3_I(inode)->i_block_alloc_info = NULL;
-       if (unlikely(rsv))
-               kfree(rsv);
-}
-
 static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
 {
 #if defined(CONFIG_QUOTA)
        struct ext3_sb_info *sbi = EXT3_SB(sb);
 
-       if (sbi->s_jquota_fmt)
-               seq_printf(seq, ",jqfmt=%s",
-               (sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold": "vfsv0");
+       if (sbi->s_jquota_fmt) {
+               char *fmtname = "";
+
+               switch (sbi->s_jquota_fmt) {
+               case QFMT_VFS_OLD:
+                       fmtname = "vfsold";
+                       break;
+               case QFMT_VFS_V0:
+                       fmtname = "vfsv0";
+                       break;
+               case QFMT_VFS_V1:
+                       fmtname = "vfsv1";
+                       break;
+               }
+               seq_printf(seq, ",jqfmt=%s", fmtname);
+       }
 
        if (sbi->s_qf_names[USRQUOTA])
                seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]);
@@ -551,14 +555,27 @@ static inline void ext3_show_quota_options(struct seq_file *seq, struct super_bl
        if (sbi->s_qf_names[GRPQUOTA])
                seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]);
 
-       if (sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA)
+       if (test_opt(sb, USRQUOTA))
                seq_puts(seq, ",usrquota");
 
-       if (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)
+       if (test_opt(sb, GRPQUOTA))
                seq_puts(seq, ",grpquota");
 #endif
 }
 
+static char *data_mode_string(unsigned long mode)
+{
+       switch (mode) {
+       case EXT3_MOUNT_JOURNAL_DATA:
+               return "journal";
+       case EXT3_MOUNT_ORDERED_DATA:
+               return "ordered";
+       case EXT3_MOUNT_WRITEBACK_DATA:
+               return "writeback";
+       }
+       return "unknown";
+}
+
 /*
  * Show an option if
  *  - it's set to a non-default value OR
@@ -627,21 +644,19 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
                seq_printf(seq, ",commit=%u",
                           (unsigned) (sbi->s_commit_interval / HZ));
        }
-       if (test_opt(sb, BARRIER))
-               seq_puts(seq, ",barrier=1");
-       if (test_opt(sb, NOBH))
-               seq_puts(seq, ",nobh");
-
-       if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
-               seq_puts(seq, ",data=journal");
-       else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
-               seq_puts(seq, ",data=ordered");
-       else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
-               seq_puts(seq, ",data=writeback");
 
+       /*
+        * Always display barrier state so it's clear what the status is.
+        */
+       seq_puts(seq, ",barrier=");
+       seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+       seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS)));
        if (test_opt(sb, DATA_ERR_ABORT))
                seq_puts(seq, ",data_err=abort");
 
+       if (test_opt(sb, NOLOAD))
+               seq_puts(seq, ",norecovery");
+
        ext3_show_quota_options(seq, sb);
 
        return 0;
@@ -721,21 +736,14 @@ static int ext3_release_dquot(struct dquot *dquot);
 static int ext3_mark_dquot_dirty(struct dquot *dquot);
 static int ext3_write_info(struct super_block *sb, int type);
 static int ext3_quota_on(struct super_block *sb, int type, int format_id,
-                               char *path, int remount);
+                               char *path);
 static int ext3_quota_on_mount(struct super_block *sb, int type);
 static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data,
                               size_t len, loff_t off);
 static ssize_t ext3_quota_write(struct super_block *sb, int type,
                                const char *data, size_t len, loff_t off);
 
-static struct dquot_operations ext3_quota_operations = {
-       .initialize     = dquot_initialize,
-       .drop           = dquot_drop,
-       .alloc_space    = dquot_alloc_space,
-       .alloc_inode    = dquot_alloc_inode,
-       .free_space     = dquot_free_space,
-       .free_inode     = dquot_free_inode,
-       .transfer       = dquot_transfer,
+static const struct dquot_operations ext3_quota_operations = {
        .write_dquot    = ext3_write_dquot,
        .acquire_dquot  = ext3_acquire_dquot,
        .release_dquot  = ext3_release_dquot,
@@ -745,14 +753,14 @@ static struct dquot_operations ext3_quota_operations = {
        .destroy_dquot  = dquot_destroy,
 };
 
-static struct quotactl_ops ext3_qctl_operations = {
+static const struct quotactl_ops ext3_qctl_operations = {
        .quota_on       = ext3_quota_on,
-       .quota_off      = vfs_quota_off,
-       .quota_sync     = vfs_quota_sync,
-       .get_info       = vfs_get_dqinfo,
-       .set_info       = vfs_set_dqinfo,
-       .get_dqblk      = vfs_get_dqblk,
-       .set_dqblk      = vfs_set_dqblk
+       .quota_off      = dquot_quota_off,
+       .quota_sync     = dquot_quota_sync,
+       .get_info       = dquot_get_dqinfo,
+       .set_info       = dquot_set_dqinfo,
+       .get_dqblk      = dquot_get_dqblk,
+       .set_dqblk      = dquot_set_dqblk
 };
 #endif
 
@@ -761,14 +769,13 @@ static const struct super_operations ext3_sops = {
        .destroy_inode  = ext3_destroy_inode,
        .write_inode    = ext3_write_inode,
        .dirty_inode    = ext3_dirty_inode,
-       .delete_inode   = ext3_delete_inode,
+       .evict_inode    = ext3_evict_inode,
        .put_super      = ext3_put_super,
        .sync_fs        = ext3_sync_fs,
        .freeze_fs      = ext3_freeze,
        .unfreeze_fs    = ext3_unfreeze,
        .statfs         = ext3_statfs,
        .remount_fs     = ext3_remount,
-       .clear_inode    = ext3_clear_inode,
        .show_options   = ext3_show_options,
 #ifdef CONFIG_QUOTA
        .quota_read     = ext3_quota_read,
@@ -793,9 +800,9 @@ enum {
        Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
        Opt_data_err_abort, Opt_data_err_ignore,
        Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
-       Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
-       Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota,
-       Opt_grpquota
+       Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
+       Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
+       Opt_resize, Opt_usrquota, Opt_grpquota
 };
 
 static const match_table_t tokens = {
@@ -824,6 +831,7 @@ static const match_table_t tokens = {
        {Opt_reservation, "reservation"},
        {Opt_noreservation, "noreservation"},
        {Opt_noload, "noload"},
+       {Opt_noload, "norecovery"},
        {Opt_nobh, "nobh"},
        {Opt_bh, "bh"},
        {Opt_commit, "commit=%u"},
@@ -842,16 +850,19 @@ static const match_table_t tokens = {
        {Opt_grpjquota, "grpjquota=%s"},
        {Opt_jqfmt_vfsold, "jqfmt=vfsold"},
        {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
+       {Opt_jqfmt_vfsv1, "jqfmt=vfsv1"},
        {Opt_grpquota, "grpquota"},
        {Opt_noquota, "noquota"},
        {Opt_quota, "quota"},
        {Opt_usrquota, "usrquota"},
        {Opt_barrier, "barrier=%u"},
+       {Opt_barrier, "barrier"},
+       {Opt_nobarrier, "nobarrier"},
        {Opt_resize, "resize"},
        {Opt_err, NULL},
 };
 
-static ext3_fsblk_t get_sb_block(void **data)
+static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb)
 {
        ext3_fsblk_t    sb_block;
        char            *options = (char *) *data;
@@ -862,7 +873,7 @@ static ext3_fsblk_t get_sb_block(void **data)
        /*todo: use simple_strtoll with >32bit ext3 */
        sb_block = simple_strtoul(options, &options, 0);
        if (*options && *options != ',') {
-               printk("EXT3-fs: Invalid sb specification: %s\n",
+               ext3_msg(sb, "error: invalid sb specification: %s",
                       (char *) *data);
                return 1;
        }
@@ -872,6 +883,63 @@ static ext3_fsblk_t get_sb_block(void **data)
        return sb_block;
 }
 
+#ifdef CONFIG_QUOTA
+static int set_qf_name(struct super_block *sb, int qtype, substring_t *args)
+{
+       struct ext3_sb_info *sbi = EXT3_SB(sb);
+       char *qname;
+
+       if (sb_any_quota_loaded(sb) &&
+               !sbi->s_qf_names[qtype]) {
+               ext3_msg(sb, KERN_ERR,
+                       "Cannot change journaled "
+                       "quota options when quota turned on");
+               return 0;
+       }
+       qname = match_strdup(args);
+       if (!qname) {
+               ext3_msg(sb, KERN_ERR,
+                       "Not enough memory for storing quotafile name");
+               return 0;
+       }
+       if (sbi->s_qf_names[qtype] &&
+               strcmp(sbi->s_qf_names[qtype], qname)) {
+               ext3_msg(sb, KERN_ERR,
+                       "%s quota file already specified", QTYPE2NAME(qtype));
+               kfree(qname);
+               return 0;
+       }
+       sbi->s_qf_names[qtype] = qname;
+       if (strchr(sbi->s_qf_names[qtype], '/')) {
+               ext3_msg(sb, KERN_ERR,
+                       "quotafile must be on filesystem root");
+               kfree(sbi->s_qf_names[qtype]);
+               sbi->s_qf_names[qtype] = NULL;
+               return 0;
+       }
+       set_opt(sbi->s_mount_opt, QUOTA);
+       return 1;
+}
+
+static int clear_qf_name(struct super_block *sb, int qtype) {
+
+       struct ext3_sb_info *sbi = EXT3_SB(sb);
+
+       if (sb_any_quota_loaded(sb) &&
+               sbi->s_qf_names[qtype]) {
+               ext3_msg(sb, KERN_ERR, "Cannot change journaled quota options"
+                       " when quota turned on");
+               return 0;
+       }
+       /*
+        * The space will be released later when all options are confirmed
+        * to be correct
+        */
+       sbi->s_qf_names[qtype] = NULL;
+       return 1;
+}
+#endif
+
 static int parse_options (char *options, struct super_block *sb,
                          unsigned int *inum, unsigned long *journal_devnum,
                          ext3_fsblk_t *n_blocks_count, int is_remount)
@@ -882,8 +950,7 @@ static int parse_options (char *options, struct super_block *sb,
        int data_opt = 0;
        int option;
 #ifdef CONFIG_QUOTA
-       int qtype, qfmt;
-       char *qname;
+       int qfmt;
 #endif
 
        if (!options)
@@ -893,7 +960,11 @@ static int parse_options (char *options, struct super_block *sb,
                int token;
                if (!*p)
                        continue;
-
+               /*
+                * Initialize args struct so we know whether arg was
+                * found; some options take optional arguments.
+                */
+               args[0].to = args[0].from = 0;
                token = match_token(p, tokens, args);
                switch (token) {
                case Opt_bsd_df:
@@ -962,7 +1033,8 @@ static int parse_options (char *options, struct super_block *sb,
 #else
                case Opt_user_xattr:
                case Opt_nouser_xattr:
-                       printk("EXT3 (no)user_xattr options not supported\n");
+                       ext3_msg(sb, KERN_INFO,
+                               "(no)user_xattr options not supported");
                        break;
 #endif
 #ifdef CONFIG_EXT3_FS_POSIX_ACL
@@ -975,7 +1047,8 @@ static int parse_options (char *options, struct super_block *sb,
 #else
                case Opt_acl:
                case Opt_noacl:
-                       printk("EXT3 (no)acl options not supported\n");
+                       ext3_msg(sb, KERN_INFO,
+                               "(no)acl options not supported");
                        break;
 #endif
                case Opt_reservation:
@@ -991,16 +1064,16 @@ static int parse_options (char *options, struct super_block *sb,
                           user to specify an existing inode to be the
                           journal file. */
                        if (is_remount) {
-                               printk(KERN_ERR "EXT3-fs: cannot specify "
-                                      "journal on remount\n");
+                               ext3_msg(sb, KERN_ERR, "error: cannot specify "
+                                       "journal on remount");
                                return 0;
                        }
                        set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
                        break;
                case Opt_journal_inum:
                        if (is_remount) {
-                               printk(KERN_ERR "EXT3-fs: cannot specify "
-                                      "journal on remount\n");
+                               ext3_msg(sb, KERN_ERR, "error: cannot specify "
+                                      "journal on remount");
                                return 0;
                        }
                        if (match_int(&args[0], &option))
@@ -1009,8 +1082,8 @@ static int parse_options (char *options, struct super_block *sb,
                        break;
                case Opt_journal_dev:
                        if (is_remount) {
-                               printk(KERN_ERR "EXT3-fs: cannot specify "
-                                      "journal on remount\n");
+                               ext3_msg(sb, KERN_ERR, "error: cannot specify "
+                                      "journal on remount");
                                return 0;
                        }
                        if (match_int(&args[0], &option))
@@ -1039,15 +1112,19 @@ static int parse_options (char *options, struct super_block *sb,
                        data_opt = EXT3_MOUNT_WRITEBACK_DATA;
                datacheck:
                        if (is_remount) {
-                               if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
-                                               != data_opt) {
-                                       printk(KERN_ERR
-                                               "EXT3-fs: cannot change data "
-                                               "mode on remount\n");
-                                       return 0;
-                               }
+                               if (test_opt(sb, DATA_FLAGS) == data_opt)
+                                       break;
+                               ext3_msg(sb, KERN_ERR,
+                                       "error: cannot change "
+                                       "data mode on remount. The filesystem "
+                                       "is mounted in data=%s mode and you "
+                                       "try to remount it in data=%s mode.",
+                                       data_mode_string(test_opt(sb,
+                                                       DATA_FLAGS)),
+                                       data_mode_string(data_opt));
+                               return 0;
                        } else {
-                               sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
+                               clear_opt(sbi->s_mount_opt, DATA_FLAGS);
                                sbi->s_mount_opt |= data_opt;
                        }
                        break;
@@ -1059,74 +1136,35 @@ static int parse_options (char *options, struct super_block *sb,
                        break;
 #ifdef CONFIG_QUOTA
                case Opt_usrjquota:
-                       qtype = USRQUOTA;
-                       goto set_qf_name;
-               case Opt_grpjquota:
-                       qtype = GRPQUOTA;
-set_qf_name:
-                       if (sb_any_quota_loaded(sb) &&
-                           !sbi->s_qf_names[qtype]) {
-                               printk(KERN_ERR
-                                       "EXT3-fs: Cannot change journaled "
-                                       "quota options when quota turned on.\n");
+                       if (!set_qf_name(sb, USRQUOTA, &args[0]))
                                return 0;
-                       }
-                       qname = match_strdup(&args[0]);
-                       if (!qname) {
-                               printk(KERN_ERR
-                                       "EXT3-fs: not enough memory for "
-                                       "storing quotafile name.\n");
-                               return 0;
-                       }
-                       if (sbi->s_qf_names[qtype] &&
-                           strcmp(sbi->s_qf_names[qtype], qname)) {
-                               printk(KERN_ERR
-                                       "EXT3-fs: %s quota file already "
-                                       "specified.\n", QTYPE2NAME(qtype));
-                               kfree(qname);
-                               return 0;
-                       }
-                       sbi->s_qf_names[qtype] = qname;
-                       if (strchr(sbi->s_qf_names[qtype], '/')) {
-                               printk(KERN_ERR
-                                       "EXT3-fs: quotafile must be on "
-                                       "filesystem root.\n");
-                               kfree(sbi->s_qf_names[qtype]);
-                               sbi->s_qf_names[qtype] = NULL;
+                       break;
+               case Opt_grpjquota:
+                       if (!set_qf_name(sb, GRPQUOTA, &args[0]))
                                return 0;
-                       }
-                       set_opt(sbi->s_mount_opt, QUOTA);
                        break;
                case Opt_offusrjquota:
-                       qtype = USRQUOTA;
-                       goto clear_qf_name;
+                       if (!clear_qf_name(sb, USRQUOTA))
+                               return 0;
+                       break;
                case Opt_offgrpjquota:
-                       qtype = GRPQUOTA;
-clear_qf_name:
-                       if (sb_any_quota_loaded(sb) &&
-                           sbi->s_qf_names[qtype]) {
-                               printk(KERN_ERR "EXT3-fs: Cannot change "
-                                       "journaled quota options when "
-                                       "quota turned on.\n");
+                       if (!clear_qf_name(sb, GRPQUOTA))
                                return 0;
-                       }
-                       /*
-                        * The space will be released later when all options
-                        * are confirmed to be correct
-                        */
-                       sbi->s_qf_names[qtype] = NULL;
                        break;
                case Opt_jqfmt_vfsold:
                        qfmt = QFMT_VFS_OLD;
                        goto set_qf_format;
                case Opt_jqfmt_vfsv0:
                        qfmt = QFMT_VFS_V0;
+                       goto set_qf_format;
+               case Opt_jqfmt_vfsv1:
+                       qfmt = QFMT_VFS_V1;
 set_qf_format:
                        if (sb_any_quota_loaded(sb) &&
                            sbi->s_jquota_fmt != qfmt) {
-                               printk(KERN_ERR "EXT3-fs: Cannot change "
+                               ext3_msg(sb, KERN_ERR, "error: cannot change "
                                        "journaled quota options when "
-                                       "quota turned on.\n");
+                                       "quota turned on.");
                                return 0;
                        }
                        sbi->s_jquota_fmt = qfmt;
@@ -1142,8 +1180,8 @@ set_qf_format:
                        break;
                case Opt_noquota:
                        if (sb_any_quota_loaded(sb)) {
-                               printk(KERN_ERR "EXT3-fs: Cannot change quota "
-                                       "options when quota turned on.\n");
+                               ext3_msg(sb, KERN_ERR, "error: cannot change "
+                                       "quota options when quota turned on.");
                                return 0;
                        }
                        clear_opt(sbi->s_mount_opt, QUOTA);
@@ -1154,8 +1192,8 @@ set_qf_format:
                case Opt_quota:
                case Opt_usrquota:
                case Opt_grpquota:
-                       printk(KERN_ERR
-                               "EXT3-fs: quota options not supported.\n");
+                       ext3_msg(sb, KERN_ERR,
+                               "error: quota options not supported.");
                        break;
                case Opt_usrjquota:
                case Opt_grpjquota:
@@ -1163,9 +1201,10 @@ set_qf_format:
                case Opt_offgrpjquota:
                case Opt_jqfmt_vfsold:
                case Opt_jqfmt_vfsv0:
-                       printk(KERN_ERR
-                               "EXT3-fs: journaled quota options not "
-                               "supported.\n");
+               case Opt_jqfmt_vfsv1:
+                       ext3_msg(sb, KERN_ERR,
+                               "error: journaled quota options not "
+                               "supported.");
                        break;
                case Opt_noquota:
                        break;
@@ -1173,9 +1212,15 @@ set_qf_format:
                case Opt_abort:
                        set_opt(sbi->s_mount_opt, ABORT);
                        break;
+               case Opt_nobarrier:
+                       clear_opt(sbi->s_mount_opt, BARRIER);
+                       break;
                case Opt_barrier:
-                       if (match_int(&args[0], &option))
-                               return 0;
+                       if (args[0].from) {
+                               if (match_int(&args[0], &option))
+                                       return 0;
+                       } else
+                               option = 1;     /* No argument, default to 1 */
                        if (option)
                                set_opt(sbi->s_mount_opt, BARRIER);
                        else
@@ -1185,8 +1230,9 @@ set_qf_format:
                        break;
                case Opt_resize:
                        if (!is_remount) {
-                               printk("EXT3-fs: resize option only available "
-                                       "for remount\n");
+                               ext3_msg(sb, KERN_ERR,
+                                       "error: resize option only available "
+                                       "for remount");
                                return 0;
                        }
                        if (match_int(&args[0], &option) != 0)
@@ -1194,47 +1240,43 @@ set_qf_format:
                        *n_blocks_count = option;
                        break;
                case Opt_nobh:
-                       set_opt(sbi->s_mount_opt, NOBH);
+                       ext3_msg(sb, KERN_WARNING,
+                               "warning: ignoring deprecated nobh option");
                        break;
                case Opt_bh:
-                       clear_opt(sbi->s_mount_opt, NOBH);
+                       ext3_msg(sb, KERN_WARNING,
+                               "warning: ignoring deprecated bh option");
                        break;
                default:
-                       printk (KERN_ERR
-                               "EXT3-fs: Unrecognized mount option \"%s\" "
-                               "or missing value\n", p);
+                       ext3_msg(sb, KERN_ERR,
+                               "error: unrecognized mount option \"%s\" "
+                               "or missing value", p);
                        return 0;
                }
        }
 #ifdef CONFIG_QUOTA
        if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
-               if ((sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA) &&
-                    sbi->s_qf_names[USRQUOTA])
+               if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA])
                        clear_opt(sbi->s_mount_opt, USRQUOTA);
-
-               if ((sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA) &&
-                    sbi->s_qf_names[GRPQUOTA])
+               if (test_opt(sb, GRPQUOTA) && sbi->s_qf_names[GRPQUOTA])
                        clear_opt(sbi->s_mount_opt, GRPQUOTA);
 
-               if ((sbi->s_qf_names[USRQUOTA] &&
-                               (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)) ||
-                   (sbi->s_qf_names[GRPQUOTA] &&
-                               (sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA))) {
-                       printk(KERN_ERR "EXT3-fs: old and new quota "
-                                       "format mixing.\n");
+               if (test_opt(sb, GRPQUOTA) || test_opt(sb, USRQUOTA)) {
+                       ext3_msg(sb, KERN_ERR, "error: old and new quota "
+                                       "format mixing.");
                        return 0;
                }
 
                if (!sbi->s_jquota_fmt) {
-                       printk(KERN_ERR "EXT3-fs: journaled quota format "
-                                       "not specified.\n");
+                       ext3_msg(sb, KERN_ERR, "error: journaled quota format "
+                                       "not specified.");
                        return 0;
                }
        } else {
                if (sbi->s_jquota_fmt) {
-                       printk(KERN_ERR "EXT3-fs: journaled quota format "
+                       ext3_msg(sb, KERN_ERR, "error: journaled quota format "
                                        "specified with no journaling "
-                                       "enabled.\n");
+                                       "enabled.");
                        return 0;
                }
        }
@@ -1249,31 +1291,33 @@ static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
        int res = 0;
 
        if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
-               printk (KERN_ERR "EXT3-fs warning: revision level too high, "
-                       "forcing read-only mode\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: revision level too high, "
+                       "forcing read-only mode");
                res = MS_RDONLY;
        }
        if (read_only)
                return res;
        if (!(sbi->s_mount_state & EXT3_VALID_FS))
-               printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
-                       "running e2fsck is recommended\n");
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: mounting unchecked fs, "
+                       "running e2fsck is recommended");
        else if ((sbi->s_mount_state & EXT3_ERROR_FS))
-               printk (KERN_WARNING
-                       "EXT3-fs warning: mounting fs with errors, "
-                       "running e2fsck is recommended\n");
-       else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: mounting fs with errors, "
+                       "running e2fsck is recommended");
+       else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 &&
                 le16_to_cpu(es->s_mnt_count) >=
-                (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
-               printk (KERN_WARNING
-                       "EXT3-fs warning: maximal mount count reached, "
-                       "running e2fsck is recommended\n");
+                       le16_to_cpu(es->s_max_mnt_count))
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: maximal mount count reached, "
+                       "running e2fsck is recommended");
        else if (le32_to_cpu(es->s_checkinterval) &&
                (le32_to_cpu(es->s_lastcheck) +
                        le32_to_cpu(es->s_checkinterval) <= get_seconds()))
-               printk (KERN_WARNING
-                       "EXT3-fs warning: checktime reached, "
-                       "running e2fsck is recommended\n");
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: checktime reached, "
+                       "running e2fsck is recommended");
 #if 0
                /* @@@ We _will_ want to clear the valid bit if we find
                    inconsistencies, to force a fsck at reboot.  But for
@@ -1281,7 +1325,7 @@ static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
                    valid forever! :) */
        es->s_state &= cpu_to_le16(~EXT3_VALID_FS);
 #endif
-       if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
+       if (!le16_to_cpu(es->s_max_mnt_count))
                es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
        le16_add_cpu(&es->s_mnt_count, 1);
        es->s_mtime = cpu_to_le32(get_seconds());
@@ -1290,22 +1334,20 @@ static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
 
        ext3_commit_super(sb, es, 1);
        if (test_opt(sb, DEBUG))
-               printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, "
-                               "bpg=%lu, ipg=%lu, mo=%04lx]\n",
+               ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, "
+                               "bpg=%lu, ipg=%lu, mo=%04lx]",
                        sb->s_blocksize,
                        sbi->s_groups_count,
                        EXT3_BLOCKS_PER_GROUP(sb),
                        EXT3_INODES_PER_GROUP(sb),
                        sbi->s_mount_opt);
 
-       printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id);
        if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
                char b[BDEVNAME_SIZE];
-
-               printk("external journal on %s\n",
+               ext3_msg(sb, KERN_INFO, "using external journal on %s",
                        bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
        } else {
-               printk("internal journal\n");
+               ext3_msg(sb, KERN_INFO, "using internal journal");
        }
        return res;
 }
@@ -1399,8 +1441,8 @@ static void ext3_orphan_cleanup (struct super_block * sb,
        }
 
        if (bdev_read_only(sb->s_bdev)) {
-               printk(KERN_ERR "EXT3-fs: write access "
-                       "unavailable, skipping orphan cleanup.\n");
+               ext3_msg(sb, KERN_ERR, "error: write access "
+                       "unavailable, skipping orphan cleanup.");
                return;
        }
 
@@ -1414,8 +1456,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
        }
 
        if (s_flags & MS_RDONLY) {
-               printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n",
-                      sb->s_id);
+               ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
                sb->s_flags &= ~MS_RDONLY;
        }
 #ifdef CONFIG_QUOTA
@@ -1426,9 +1467,9 @@ static void ext3_orphan_cleanup (struct super_block * sb,
                if (EXT3_SB(sb)->s_qf_names[i]) {
                        int ret = ext3_quota_on_mount(sb, i);
                        if (ret < 0)
-                               printk(KERN_ERR
-                                       "EXT3-fs: Cannot turn on journaled "
-                                       "quota: error %d\n", ret);
+                               ext3_msg(sb, KERN_ERR,
+                                       "error: cannot turn on journaled "
+                                       "quota: %d", ret);
                }
        }
 #endif
@@ -1443,7 +1484,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
                }
 
                list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
-               vfs_dq_init(inode);
+               dquot_initialize(inode);
                if (inode->i_nlink) {
                        printk(KERN_DEBUG
                                "%s: truncating inode %lu to %Ld bytes\n",
@@ -1466,16 +1507,16 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 #define PLURAL(x) (x), ((x)==1) ? "" : "s"
 
        if (nr_orphans)
-               printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n",
-                      sb->s_id, PLURAL(nr_orphans));
+               ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
+                      PLURAL(nr_orphans));
        if (nr_truncates)
-               printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n",
-                      sb->s_id, PLURAL(nr_truncates));
+               ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
+                      PLURAL(nr_truncates));
 #ifdef CONFIG_QUOTA
        /* Turn quotas off */
        for (i = 0; i < MAXQUOTAS; i++) {
                if (sb_dqopt(sb)->files[i])
-                       vfs_quota_off(sb, i, 0);
+                       dquot_quota_off(sb, i);
        }
 #endif
        sb->s_flags = s_flags; /* Restore MS_RDONLY status */
@@ -1554,7 +1595,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        struct ext3_super_block *es = NULL;
        struct ext3_sb_info *sbi;
        ext3_fsblk_t block;
-       ext3_fsblk_t sb_block = get_sb_block(&data);
+       ext3_fsblk_t sb_block = get_sb_block(&data, sb);
        ext3_fsblk_t logic_sb_block;
        unsigned long offset = 0;
        unsigned int journal_inum = 0;
@@ -1590,7 +1631,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 
        blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
        if (!blocksize) {
-               printk(KERN_ERR "EXT3-fs: unable to set blocksize\n");
+               ext3_msg(sb, KERN_ERR, "error: unable to set blocksize");
                goto out_fail;
        }
 
@@ -1606,14 +1647,14 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        }
 
        if (!(bh = sb_bread(sb, logic_sb_block))) {
-               printk (KERN_ERR "EXT3-fs: unable to read superblock\n");
+               ext3_msg(sb, KERN_ERR, "error: unable to read superblock");
                goto out_fail;
        }
        /*
         * Note: s_es must be initialized as soon as possible because
         *       some ext3 macro-instructions depend on its value
         */
-       es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
+       es = (struct ext3_super_block *) (bh->b_data + offset);
        sbi->s_es = es;
        sb->s_magic = le16_to_cpu(es->s_magic);
        if (sb->s_magic != EXT3_SUPER_MAGIC)
@@ -1636,11 +1677,11 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
                set_opt(sbi->s_mount_opt, POSIX_ACL);
 #endif
        if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA)
-               sbi->s_mount_opt |= EXT3_MOUNT_JOURNAL_DATA;
+               set_opt(sbi->s_mount_opt, JOURNAL_DATA);
        else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED)
-               sbi->s_mount_opt |= EXT3_MOUNT_ORDERED_DATA;
+               set_opt(sbi->s_mount_opt, ORDERED_DATA);
        else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK)
-               sbi->s_mount_opt |= EXT3_MOUNT_WRITEBACK_DATA;
+               set_opt(sbi->s_mount_opt, WRITEBACK_DATA);
 
        if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC)
                set_opt(sbi->s_mount_opt, ERRORS_PANIC);
@@ -1659,15 +1700,15 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
                goto failed_mount;
 
        sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
-               ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
+               (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
 
        if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV &&
            (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
             EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
             EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
-               printk(KERN_WARNING
-                      "EXT3-fs warning: feature flags set on rev 0 fs, "
-                      "running e2fsck is recommended\n");
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: feature flags set on rev 0 fs, "
+                       "running e2fsck is recommended");
        /*
         * Check feature flags regardless of the revision level, since we
         * previously didn't change the revision level when setting the flags,
@@ -1675,25 +1716,25 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
         */
        features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP);
        if (features) {
-               printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
-                      "unsupported optional features (%x).\n",
-                      sb->s_id, le32_to_cpu(features));
+               ext3_msg(sb, KERN_ERR,
+                       "error: couldn't mount because of unsupported "
+                       "optional features (%x)", le32_to_cpu(features));
                goto failed_mount;
        }
        features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP);
        if (!(sb->s_flags & MS_RDONLY) && features) {
-               printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
-                      "unsupported optional features (%x).\n",
-                      sb->s_id, le32_to_cpu(features));
+               ext3_msg(sb, KERN_ERR,
+                       "error: couldn't mount RDWR because of unsupported "
+                       "optional features (%x)", le32_to_cpu(features));
                goto failed_mount;
        }
        blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
 
        if (blocksize < EXT3_MIN_BLOCK_SIZE ||
            blocksize > EXT3_MAX_BLOCK_SIZE) {
-               printk(KERN_ERR
-                      "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
-                      blocksize, sb->s_id);
+               ext3_msg(sb, KERN_ERR,
+                       "error: couldn't mount because of unsupported "
+                       "filesystem blocksize %d", blocksize);
                goto failed_mount;
        }
 
@@ -1704,30 +1745,31 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
                 * than the hardware sectorsize for the machine.
                 */
                if (blocksize < hblock) {
-                       printk(KERN_ERR "EXT3-fs: blocksize %d too small for "
-                              "device blocksize %d.\n", blocksize, hblock);
+                       ext3_msg(sb, KERN_ERR,
+                               "error: fsblocksize %d too small for "
+                               "hardware sectorsize %d", blocksize, hblock);
                        goto failed_mount;
                }
 
                brelse (bh);
                if (!sb_set_blocksize(sb, blocksize)) {
-                       printk(KERN_ERR "EXT3-fs: bad blocksize %d.\n",
-                               blocksize);
+                       ext3_msg(sb, KERN_ERR,
+                               "error: bad blocksize %d", blocksize);
                        goto out_fail;
                }
                logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
                offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
                bh = sb_bread(sb, logic_sb_block);
                if (!bh) {
-                       printk(KERN_ERR
-                              "EXT3-fs: Can't read superblock on 2nd try.\n");
+                       ext3_msg(sb, KERN_ERR,
+                              "error: can't read superblock on 2nd try");
                        goto failed_mount;
                }
-               es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
+               es = (struct ext3_super_block *)(bh->b_data + offset);
                sbi->s_es = es;
                if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
-                       printk (KERN_ERR
-                               "EXT3-fs: Magic mismatch, very weird !\n");
+                       ext3_msg(sb, KERN_ERR,
+                               "error: magic mismatch");
                        goto failed_mount;
                }
        }
@@ -1743,8 +1785,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
                if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
                    (!is_power_of_2(sbi->s_inode_size)) ||
                    (sbi->s_inode_size > blocksize)) {
-                       printk (KERN_ERR
-                               "EXT3-fs: unsupported inode size: %d\n",
+                       ext3_msg(sb, KERN_ERR,
+                               "error: unsupported inode size: %d",
                                sbi->s_inode_size);
                        goto failed_mount;
                }
@@ -1752,8 +1794,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
                                   le32_to_cpu(es->s_log_frag_size);
        if (blocksize != sbi->s_frag_size) {
-               printk(KERN_ERR
-                      "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
+               ext3_msg(sb, KERN_ERR,
+                      "error: fragsize %lu != blocksize %u (unsupported)",
                       sbi->s_frag_size, blocksize);
                goto failed_mount;
        }
@@ -1789,31 +1831,31 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        }
 
        if (sbi->s_blocks_per_group > blocksize * 8) {
-               printk (KERN_ERR
-                       "EXT3-fs: #blocks per group too big: %lu\n",
+               ext3_msg(sb, KERN_ERR,
+                       "#blocks per group too big: %lu",
                        sbi->s_blocks_per_group);
                goto failed_mount;
        }
        if (sbi->s_frags_per_group > blocksize * 8) {
-               printk (KERN_ERR
-                       "EXT3-fs: #fragments per group too big: %lu\n",
+               ext3_msg(sb, KERN_ERR,
+                       "error: #fragments per group too big: %lu",
                        sbi->s_frags_per_group);
                goto failed_mount;
        }
        if (sbi->s_inodes_per_group > blocksize * 8) {
-               printk (KERN_ERR
-                       "EXT3-fs: #inodes per group too big: %lu\n",
+               ext3_msg(sb, KERN_ERR,
+                       "error: #inodes per group too big: %lu",
                        sbi->s_inodes_per_group);
                goto failed_mount;
        }
 
        if (le32_to_cpu(es->s_blocks_count) >
                    (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
-               printk(KERN_ERR "EXT3-fs: filesystem on %s:"
-                       " too large to mount safely\n", sb->s_id);
+               ext3_msg(sb, KERN_ERR,
+                       "error: filesystem is too large to mount safely");
                if (sizeof(sector_t) < 8)
-                       printk(KERN_WARNING "EXT3-fs: CONFIG_LBDAF not "
-                                       "enabled\n");
+                       ext3_msg(sb, KERN_ERR,
+                               "error: CONFIG_LBDAF not enabled");
                goto failed_mount;
        }
 
@@ -1822,12 +1864,13 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
                               le32_to_cpu(es->s_first_data_block) - 1)
                                       / EXT3_BLOCKS_PER_GROUP(sb)) + 1;
-       db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
-                  EXT3_DESC_PER_BLOCK(sb);
+       db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb));
        sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
                                    GFP_KERNEL);
        if (sbi->s_group_desc == NULL) {
-               printk (KERN_ERR "EXT3-fs: not enough memory\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: not enough memory");
+               ret = -ENOMEM;
                goto failed_mount;
        }
 
@@ -1837,35 +1880,21 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
                block = descriptor_loc(sb, logic_sb_block, i);
                sbi->s_group_desc[i] = sb_bread(sb, block);
                if (!sbi->s_group_desc[i]) {
-                       printk (KERN_ERR "EXT3-fs: "
-                               "can't read group descriptor %d\n", i);
+                       ext3_msg(sb, KERN_ERR,
+                               "error: can't read group descriptor %d", i);
                        db_count = i;
                        goto failed_mount2;
                }
        }
        if (!ext3_check_descriptors (sb)) {
-               printk(KERN_ERR "EXT3-fs: group descriptors corrupted!\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: group descriptors corrupted");
                goto failed_mount2;
        }
        sbi->s_gdb_count = db_count;
        get_random_bytes(&sbi->s_next_generation, sizeof(u32));
        spin_lock_init(&sbi->s_next_gen_lock);
 
-       err = percpu_counter_init(&sbi->s_freeblocks_counter,
-                       ext3_count_free_blocks(sb));
-       if (!err) {
-               err = percpu_counter_init(&sbi->s_freeinodes_counter,
-                               ext3_count_free_inodes(sb));
-       }
-       if (!err) {
-               err = percpu_counter_init(&sbi->s_dirs_counter,
-                               ext3_count_dirs(sb));
-       }
-       if (err) {
-               printk(KERN_ERR "EXT3-fs: insufficient memory\n");
-               goto failed_mount3;
-       }
-
        /* per fileystem reservation list head & lock */
        spin_lock_init(&sbi->s_rsv_window_lock);
        sbi->s_rsv_window_root = RB_ROOT;
@@ -1890,6 +1919,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        sb->dq_op = &ext3_quota_operations;
 #endif
        INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
+       mutex_init(&sbi->s_orphan_lock);
+       mutex_init(&sbi->s_resize_lock);
 
        sb->s_root = NULL;
 
@@ -1904,15 +1935,30 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        if (!test_opt(sb, NOLOAD) &&
            EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) {
                if (ext3_load_journal(sb, es, journal_devnum))
-                       goto failed_mount3;
+                       goto failed_mount2;
        } else if (journal_inum) {
                if (ext3_create_journal(sb, es, journal_inum))
-                       goto failed_mount3;
+                       goto failed_mount2;
        } else {
                if (!silent)
-                       printk (KERN_ERR
-                               "ext3: No journal on filesystem on %s\n",
-                               sb->s_id);
+                       ext3_msg(sb, KERN_ERR,
+                               "error: no journal found. "
+                               "mounting ext3 over ext2?");
+               goto failed_mount2;
+       }
+       err = percpu_counter_init(&sbi->s_freeblocks_counter,
+                       ext3_count_free_blocks(sb));
+       if (!err) {
+               err = percpu_counter_init(&sbi->s_freeinodes_counter,
+                               ext3_count_free_inodes(sb));
+       }
+       if (!err) {
+               err = percpu_counter_init(&sbi->s_dirs_counter,
+                               ext3_count_dirs(sb));
+       }
+       if (err) {
+               ext3_msg(sb, KERN_ERR, "error: insufficient memory");
+               ret = err;
                goto failed_mount3;
        }
 
@@ -1934,21 +1980,15 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
        case EXT3_MOUNT_WRITEBACK_DATA:
                if (!journal_check_available_features
                    (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
-                       printk(KERN_ERR "EXT3-fs: Journal does not support "
-                              "requested data journaling mode\n");
-                       goto failed_mount4;
+                       ext3_msg(sb, KERN_ERR,
+                               "error: journal does not support "
+                               "requested data journaling mode");
+                       goto failed_mount3;
                }
        default:
                break;
        }
 
-       if (test_opt(sb, NOBH)) {
-               if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) {
-                       printk(KERN_WARNING "EXT3-fs: Ignoring nobh option - "
-                               "its supported only with writeback mode\n");
-                       clear_opt(sbi->s_mount_opt, NOBH);
-               }
-       }
        /*
         * The journal_load will have done any necessary log recovery,
         * so we can safely mount the rest of the filesystem now.
@@ -1956,39 +1996,32 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 
        root = ext3_iget(sb, EXT3_ROOT_INO);
        if (IS_ERR(root)) {
-               printk(KERN_ERR "EXT3-fs: get root inode failed\n");
+               ext3_msg(sb, KERN_ERR, "error: get root inode failed");
                ret = PTR_ERR(root);
-               goto failed_mount4;
+               goto failed_mount3;
        }
        if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
                iput(root);
-               printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
-               goto failed_mount4;
+               ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck");
+               goto failed_mount3;
        }
        sb->s_root = d_alloc_root(root);
        if (!sb->s_root) {
-               printk(KERN_ERR "EXT3-fs: get root dentry failed\n");
+               ext3_msg(sb, KERN_ERR, "error: get root dentry failed");
                iput(root);
                ret = -ENOMEM;
-               goto failed_mount4;
+               goto failed_mount3;
        }
 
        ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY);
-       /*
-        * akpm: core read_super() calls in here with the superblock locked.
-        * That deadlocks, because orphan cleanup needs to lock the superblock
-        * in numerous places.  Here we just pop the lock - it's relatively
-        * harmless, because we are now ready to accept write_super() requests,
-        * and aviro says that's the only reason for hanging onto the
-        * superblock lock.
-        */
+
        EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS;
        ext3_orphan_cleanup(sb, es);
        EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
        if (needs_recovery)
-               printk (KERN_INFO "EXT3-fs: recovery complete.\n");
+               ext3_msg(sb, KERN_INFO, "recovery complete");
        ext3_mark_recovery_complete(sb, es);
-       printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
+       ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode",
                test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
                test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
                "writeback");
@@ -1998,16 +2031,16 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 
 cantfind_ext3:
        if (!silent)
-               printk(KERN_ERR "VFS: Can't find ext3 filesystem on dev %s.\n",
+               ext3_msg(sb, KERN_INFO,
+                       "error: can't find ext3 filesystem on dev %s.",
                       sb->s_id);
        goto failed_mount;
 
-failed_mount4:
-       journal_destroy(sbi->s_journal);
 failed_mount3:
        percpu_counter_destroy(&sbi->s_freeblocks_counter);
        percpu_counter_destroy(&sbi->s_freeinodes_counter);
        percpu_counter_destroy(&sbi->s_dirs_counter);
+       journal_destroy(sbi->s_journal);
 failed_mount2:
        for (i = 0; i < db_count; i++)
                brelse(sbi->s_group_desc[i]);
@@ -2066,27 +2099,27 @@ static journal_t *ext3_get_journal(struct super_block *sb,
 
        journal_inode = ext3_iget(sb, journal_inum);
        if (IS_ERR(journal_inode)) {
-               printk(KERN_ERR "EXT3-fs: no journal found.\n");
+               ext3_msg(sb, KERN_ERR, "error: no journal found");
                return NULL;
        }
        if (!journal_inode->i_nlink) {
                make_bad_inode(journal_inode);
                iput(journal_inode);
-               printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n");
+               ext3_msg(sb, KERN_ERR, "error: journal inode is deleted");
                return NULL;
        }
 
        jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
                  journal_inode, journal_inode->i_size);
        if (!S_ISREG(journal_inode->i_mode)) {
-               printk(KERN_ERR "EXT3-fs: invalid journal inode.\n");
+               ext3_msg(sb, KERN_ERR, "error: invalid journal inode");
                iput(journal_inode);
                return NULL;
        }
 
        journal = journal_init_inode(journal_inode);
        if (!journal) {
-               printk(KERN_ERR "EXT3-fs: Could not load journal inode\n");
+               ext3_msg(sb, KERN_ERR, "error: could not load journal inode");
                iput(journal_inode);
                return NULL;
        }
@@ -2108,13 +2141,13 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
        struct ext3_super_block * es;
        struct block_device *bdev;
 
-       bdev = ext3_blkdev_get(j_dev);
+       bdev = ext3_blkdev_get(j_dev, sb);
        if (bdev == NULL)
                return NULL;
 
        if (bd_claim(bdev, sb)) {
-               printk(KERN_ERR
-                       "EXT3: failed to claim external journal device.\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: failed to claim external journal device");
                blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
                return NULL;
        }
@@ -2122,8 +2155,8 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
        blocksize = sb->s_blocksize;
        hblock = bdev_logical_block_size(bdev);
        if (blocksize < hblock) {
-               printk(KERN_ERR
-                       "EXT3-fs: blocksize too small for journal device.\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: blocksize too small for journal device");
                goto out_bdev;
        }
 
@@ -2131,23 +2164,23 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
        offset = EXT3_MIN_BLOCK_SIZE % blocksize;
        set_blocksize(bdev, blocksize);
        if (!(bh = __bread(bdev, sb_block, blocksize))) {
-               printk(KERN_ERR "EXT3-fs: couldn't read superblock of "
-                      "external journal\n");
+               ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of "
+                       "external journal");
                goto out_bdev;
        }
 
-       es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
+       es = (struct ext3_super_block *) (bh->b_data + offset);
        if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
            !(le32_to_cpu(es->s_feature_incompat) &
              EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
-               printk(KERN_ERR "EXT3-fs: external journal has "
-                                       "bad superblock\n");
+               ext3_msg(sb, KERN_ERR, "error: external journal has "
+                       "bad superblock");
                brelse(bh);
                goto out_bdev;
        }
 
        if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
-               printk(KERN_ERR "EXT3-fs: journal UUID does not match\n");
+               ext3_msg(sb, KERN_ERR, "error: journal UUID does not match");
                brelse(bh);
                goto out_bdev;
        }
@@ -2159,19 +2192,21 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
        journal = journal_init_dev(bdev, sb->s_bdev,
                                        start, len, blocksize);
        if (!journal) {
-               printk(KERN_ERR "EXT3-fs: failed to create device journal\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: failed to create device journal");
                goto out_bdev;
        }
        journal->j_private = sb;
        ll_rw_block(READ, 1, &journal->j_sb_buffer);
        wait_on_buffer(journal->j_sb_buffer);
        if (!buffer_uptodate(journal->j_sb_buffer)) {
-               printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
+               ext3_msg(sb, KERN_ERR, "I/O error on journal device");
                goto out_journal;
        }
        if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
-               printk(KERN_ERR "EXT3-fs: External journal has more than one "
-                                       "user (unsupported) - %d\n",
+               ext3_msg(sb, KERN_ERR,
+                       "error: external journal has more than one "
+                       "user (unsupported) - %d",
                        be32_to_cpu(journal->j_superblock->s_nr_users));
                goto out_journal;
        }
@@ -2197,8 +2232,8 @@ static int ext3_load_journal(struct super_block *sb,
 
        if (journal_devnum &&
            journal_devnum != le32_to_cpu(es->s_journal_dev)) {
-               printk(KERN_INFO "EXT3-fs: external journal device major/minor "
-                       "numbers have changed\n");
+               ext3_msg(sb, KERN_INFO, "external journal device major/minor "
+                       "numbers have changed");
                journal_dev = new_decode_dev(journal_devnum);
        } else
                journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
@@ -2213,21 +2248,21 @@ static int ext3_load_journal(struct super_block *sb,
 
        if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
                if (sb->s_flags & MS_RDONLY) {
-                       printk(KERN_INFO "EXT3-fs: INFO: recovery "
-                                       "required on readonly filesystem.\n");
+                       ext3_msg(sb, KERN_INFO,
+                               "recovery required on readonly filesystem");
                        if (really_read_only) {
-                               printk(KERN_ERR "EXT3-fs: write access "
-                                       "unavailable, cannot proceed.\n");
+                               ext3_msg(sb, KERN_ERR, "error: write access "
+                                       "unavailable, cannot proceed");
                                return -EROFS;
                        }
-                       printk (KERN_INFO "EXT3-fs: write access will "
-                                       "be enabled during recovery.\n");
+                       ext3_msg(sb, KERN_INFO,
+                               "write access will be enabled during recovery");
                }
        }
 
        if (journal_inum && journal_dev) {
-               printk(KERN_ERR "EXT3-fs: filesystem has both journal "
-                      "and inode journals!\n");
+               ext3_msg(sb, KERN_ERR, "error: filesystem has both journal "
+                      "and inode journals");
                return -EINVAL;
        }
 
@@ -2239,10 +2274,13 @@ static int ext3_load_journal(struct super_block *sb,
                        return -EINVAL;
        }
 
+       if (!(journal->j_flags & JFS_BARRIER))
+               printk(KERN_INFO "EXT3-fs: barriers not enabled\n");
+
        if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
                err = journal_update_format(journal);
                if (err)  {
-                       printk(KERN_ERR "EXT3-fs: error updating journal.\n");
+                       ext3_msg(sb, KERN_ERR, "error updating journal");
                        journal_destroy(journal);
                        return err;
                }
@@ -2254,7 +2292,7 @@ static int ext3_load_journal(struct super_block *sb,
                err = journal_load(journal);
 
        if (err) {
-               printk(KERN_ERR "EXT3-fs: error loading journal.\n");
+               ext3_msg(sb, KERN_ERR, "error loading journal");
                journal_destroy(journal);
                return err;
        }
@@ -2273,16 +2311,17 @@ static int ext3_load_journal(struct super_block *sb,
        return 0;
 }
 
-static int ext3_create_journal(struct super_block * sb,
-                              struct ext3_super_block * es,
+static int ext3_create_journal(struct super_block *sb,
+                              struct ext3_super_block *es,
                               unsigned int journal_inum)
 {
        journal_t *journal;
        int err;
 
        if (sb->s_flags & MS_RDONLY) {
-               printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to "
-                               "create journal.\n");
+               ext3_msg(sb, KERN_ERR,
+                       "error: readonly filesystem when trying to "
+                       "create journal");
                return -EROFS;
        }
 
@@ -2290,12 +2329,12 @@ static int ext3_create_journal(struct super_block * sb,
        if (!journal)
                return -EINVAL;
 
-       printk(KERN_INFO "EXT3-fs: creating new journal on inode %u\n",
+       ext3_msg(sb, KERN_INFO, "creating new journal on inode %u",
               journal_inum);
 
        err = journal_create(journal);
        if (err) {
-               printk(KERN_ERR "EXT3-fs: error creating journal.\n");
+               ext3_msg(sb, KERN_ERR, "error creating journal");
                journal_destroy(journal);
                return -EIO;
        }
@@ -2323,13 +2362,46 @@ static int ext3_commit_super(struct super_block *sb,
 
        if (!sbh)
                return error;
-       es->s_wtime = cpu_to_le32(get_seconds());
+
+       if (buffer_write_io_error(sbh)) {
+               /*
+                * Oh, dear.  A previous attempt to write the
+                * superblock failed.  This could happen because the
+                * USB device was yanked out.  Or it could happen to
+                * be a transient write error and maybe the block will
+                * be remapped.  Nothing we can do but to retry the
+                * write and hope for the best.
+                */
+               ext3_msg(sb, KERN_ERR, "previous I/O error to "
+                      "superblock detected");
+               clear_buffer_write_io_error(sbh);
+               set_buffer_uptodate(sbh);
+       }
+       /*
+        * If the file system is mounted read-only, don't update the
+        * superblock write time.  This avoids updating the superblock
+        * write time when we are mounting the root file system
+        * read/only but we need to replay the journal; at that point,
+        * for people who are east of GMT and who make their clock
+        * tick in localtime for Windows bug-for-bug compatibility,
+        * the clock is set in the future, and this will cause e2fsck
+        * to complain and force a full file system check.
+        */
+       if (!(sb->s_flags & MS_RDONLY))
+               es->s_wtime = cpu_to_le32(get_seconds());
        es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
        es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
        BUFFER_TRACE(sbh, "marking dirty");
        mark_buffer_dirty(sbh);
-       if (sync)
+       if (sync) {
                error = sync_dirty_buffer(sbh);
+               if (buffer_write_io_error(sbh)) {
+                       ext3_msg(sb, KERN_ERR, "I/O error while writing "
+                              "superblock");
+                       clear_buffer_write_io_error(sbh);
+                       set_buffer_uptodate(sbh);
+               }
+       }
        return error;
 }
 
@@ -2348,13 +2420,11 @@ static void ext3_mark_recovery_complete(struct super_block * sb,
        if (journal_flush(journal) < 0)
                goto out;
 
-       lock_super(sb);
        if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
            sb->s_flags & MS_RDONLY) {
                EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
                ext3_commit_super(sb, es, 1);
        }
-       unlock_super(sb);
 
 out:
        journal_unlock_updates(journal);
@@ -2365,8 +2435,8 @@ out:
  * has recorded an error from a previous lifetime, move that error to the
  * main filesystem now.
  */
-static void ext3_clear_journal_err(struct super_block * sb,
-                                  struct ext3_super_block * es)
+static void ext3_clear_journal_err(struct super_block *sb,
+                                  struct ext3_super_block *es)
 {
        journal_t *journal;
        int j_errno;
@@ -2485,6 +2555,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
        ext3_fsblk_t n_blocks_count = 0;
        unsigned long old_sb_flags;
        struct ext3_mount_options old_opts;
+       int enable_quota = 0;
        int err;
 #ifdef CONFIG_QUOTA
        int i;
@@ -2513,11 +2584,11 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
                goto restore_opts;
        }
 
-       if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
+       if (test_opt(sb, ABORT))
                ext3_abort(sb, __func__, "Abort forced by user");
 
        sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
-               ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
+               (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
 
        es = sbi->s_es;
 
@@ -2525,12 +2596,16 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 
        if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) ||
                n_blocks_count > le32_to_cpu(es->s_blocks_count)) {
-               if (sbi->s_mount_opt & EXT3_MOUNT_ABORT) {
+               if (test_opt(sb, ABORT)) {
                        err = -EROFS;
                        goto restore_opts;
                }
 
                if (*flags & MS_RDONLY) {
+                       err = dquot_suspend(sb, -1);
+                       if (err < 0)
+                               goto restore_opts;
+
                        /*
                         * First of all, the unconditional stuff we have to do
                         * to disable replay of the journal when we next remount
@@ -2546,21 +2621,15 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
                            (sbi->s_mount_state & EXT3_VALID_FS))
                                es->s_state = cpu_to_le16(sbi->s_mount_state);
 
-                       /*
-                        * We have to unlock super so that we can wait for
-                        * transactions.
-                        */
-                       unlock_super(sb);
                        ext3_mark_recovery_complete(sb, es);
-                       lock_super(sb);
                } else {
                        __le32 ret;
                        if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
                                        ~EXT3_FEATURE_RO_COMPAT_SUPP))) {
-                               printk(KERN_WARNING "EXT3-fs: %s: couldn't "
-                                      "remount RDWR because of unsupported "
-                                      "optional features (%x).\n",
-                                      sb->s_id, le32_to_cpu(ret));
+                               ext3_msg(sb, KERN_WARNING,
+                                       "warning: couldn't remount RDWR "
+                                       "because of unsupported optional "
+                                       "features (%x)", le32_to_cpu(ret));
                                err = -EROFS;
                                goto restore_opts;
                        }
@@ -2571,11 +2640,10 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
                         * require a full umount/remount for now.
                         */
                        if (es->s_last_orphan) {
-                               printk(KERN_WARNING "EXT3-fs: %s: couldn't "
+                               ext3_msg(sb, KERN_WARNING, "warning: couldn't "
                                       "remount RDWR because of unprocessed "
                                       "orphan inode list.  Please "
-                                      "umount/remount instead.\n",
-                                      sb->s_id);
+                                      "umount/remount instead.");
                                err = -EINVAL;
                                goto restore_opts;
                        }
@@ -2592,6 +2660,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
                                goto restore_opts;
                        if (!ext3_setup_super (sb, es, 0))
                                sb->s_flags &= ~MS_RDONLY;
+                       enable_quota = 1;
                }
        }
 #ifdef CONFIG_QUOTA
@@ -2603,6 +2672,9 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 #endif
        unlock_super(sb);
        unlock_kernel();
+
+       if (enable_quota)
+               dquot_resume(sb, -1);
        return 0;
 restore_opts:
        sb->s_flags = old_sb_flags;
@@ -2675,13 +2747,11 @@ static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf)
        buf->f_bsize = sb->s_blocksize;
        buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last;
        buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter);
-       es->s_free_blocks_count = cpu_to_le32(buf->f_bfree);
        buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
        if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
                buf->f_bavail = 0;
        buf->f_files = le32_to_cpu(es->s_inodes_count);
        buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter);
-       es->s_free_inodes_count = cpu_to_le32(buf->f_ffree);
        buf->f_namelen = EXT3_NAME_LEN;
        fsid = le64_to_cpup((void *)es->s_uuid) ^
               le64_to_cpup((void *)es->s_uuid + sizeof(u64));
@@ -2695,7 +2765,7 @@ static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf)
  * Process 1                         Process 2
  * ext3_create()                     quota_sync()
  *   journal_start()                   write_dquot()
- *   vfs_dq_init()                       down(dqio_mutex)
+ *   dquot_initialize()                       down(dqio_mutex)
  *     down(dqio_mutex)                    journal_start()
  *
  */
@@ -2794,24 +2864,21 @@ static int ext3_write_info(struct super_block *sb, int type)
  */
 static int ext3_quota_on_mount(struct super_block *sb, int type)
 {
-       return vfs_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type],
-                       EXT3_SB(sb)->s_jquota_fmt, type);
+       return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type],
+                                       EXT3_SB(sb)->s_jquota_fmt, type);
 }
 
 /*
  * Standard function to be called on quota_on
  */
 static int ext3_quota_on(struct super_block *sb, int type, int format_id,
-                        char *name, int remount)
+                        char *name)
 {
        int err;
        struct path path;
 
        if (!test_opt(sb, QUOTA))
                return -EINVAL;
-       /* When remounting, no checks are needed and in fact, name is NULL */
-       if (remount)
-               return vfs_quota_on(sb, type, format_id, name, remount);
 
        err = kern_path(name, LOOKUP_FOLLOW, &path);
        if (err)
@@ -2826,9 +2893,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
        if (EXT3_SB(sb)->s_qf_names[type]) {
                /* Quotafile not of fs root? */
                if (path.dentry->d_parent != sb->s_root)
-                       printk(KERN_WARNING
-                               "EXT3-fs: Quota file not on filesystem root. "
-                               "Journaled quota will not work.\n");
+                       ext3_msg(sb, KERN_WARNING,
+                               "warning: Quota file not on filesystem root. "
+                               "Journaled quota will not work.");
        }
 
        /*
@@ -2849,7 +2916,7 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
                }
        }
 
-       err = vfs_quota_on_path(sb, type, format_id, &path);
+       err = dquot_quota_on_path(sb, type, format_id, &path);
        path_put(&path);
        return err;
 }
@@ -2903,65 +2970,65 @@ static ssize_t ext3_quota_write(struct super_block *sb, int type,
        sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb);
        int err = 0;
        int offset = off & (sb->s_blocksize - 1);
-       int tocopy;
        int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL;
-       size_t towrite = len;
        struct buffer_head *bh;
        handle_t *handle = journal_current_handle();
 
        if (!handle) {
-               printk(KERN_WARNING "EXT3-fs: Quota write (off=%Lu, len=%Lu)"
-                       " cancelled because transaction is not started.\n",
+               ext3_msg(sb, KERN_WARNING,
+                       "warning: quota write (off=%llu, len=%llu)"
+                       " cancelled because transaction is not started.",
+                       (unsigned long long)off, (unsigned long long)len);
+               return -EIO;
+       }
+
+       /*
+        * Since we account only one data block in transaction credits,
+        * then it is impossible to cross a block boundary.
+        */
+       if (sb->s_blocksize - offset < len) {
+               ext3_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
+                       " cancelled because not block aligned",
                        (unsigned long long)off, (unsigned long long)len);
                return -EIO;
        }
        mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
-       while (towrite > 0) {
-               tocopy = sb->s_blocksize - offset < towrite ?
-                               sb->s_blocksize - offset : towrite;
-               bh = ext3_bread(handle, inode, blk, 1, &err);
-               if (!bh)
+       bh = ext3_bread(handle, inode, blk, 1, &err);
+       if (!bh)
+               goto out;
+       if (journal_quota) {
+               err = ext3_journal_get_write_access(handle, bh);
+               if (err) {
+                       brelse(bh);
                        goto out;
-               if (journal_quota) {
-                       err = ext3_journal_get_write_access(handle, bh);
-                       if (err) {
-                               brelse(bh);
-                               goto out;
-                       }
                }
-               lock_buffer(bh);
-               memcpy(bh->b_data+offset, data, tocopy);
-               flush_dcache_page(bh->b_page);
-               unlock_buffer(bh);
-               if (journal_quota)
-                       err = ext3_journal_dirty_metadata(handle, bh);
-               else {
-                       /* Always do at least ordered writes for quotas */
-                       err = ext3_journal_dirty_data(handle, bh);
-                       mark_buffer_dirty(bh);
-               }
-               brelse(bh);
-               if (err)
-                       goto out;
-               offset = 0;
-               towrite -= tocopy;
-               data += tocopy;
-               blk++;
        }
+       lock_buffer(bh);
+       memcpy(bh->b_data+offset, data, len);
+       flush_dcache_page(bh->b_page);
+       unlock_buffer(bh);
+       if (journal_quota)
+               err = ext3_journal_dirty_metadata(handle, bh);
+       else {
+               /* Always do at least ordered writes for quotas */
+               err = ext3_journal_dirty_data(handle, bh);
+               mark_buffer_dirty(bh);
+       }
+       brelse(bh);
 out:
-       if (len == towrite) {
+       if (err) {
                mutex_unlock(&inode->i_mutex);
                return err;
        }
-       if (inode->i_size < off+len-towrite) {
-               i_size_write(inode, off+len-towrite);
+       if (inode->i_size < off + len) {
+               i_size_write(inode, off + len);
                EXT3_I(inode)->i_disksize = inode->i_size;
        }
        inode->i_version++;
        inode->i_mtime = inode->i_ctime = CURRENT_TIME;
        ext3_mark_inode_dirty(handle, inode);
        mutex_unlock(&inode->i_mutex);
-       return len - towrite;
+       return len;
 }
 
 #endif