config EXT2_FS_POSIX_ACL
bool "Ext2 POSIX Access Control Lists"
depends on EXT2_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
If you are not using a security module that requires using
extended attributes for file security labels, say N.
+config EXT2_FS_XIP
+ bool "Ext2 execute in place support"
+ depends on EXT2_FS && MMU
+ help
+ Execute in place can be used on memory-backed block devices. If you
+ enable this option, you can select to mount block devices which are
+ capable of this feature without using the page cache.
+
+ If you do not use a block device that is capable of using this,
+ or if unsure, say N.
+
+config FS_XIP
+# execute in place
+ bool
+ depends on EXT2_FS_XIP
+ default y
+
config EXT3_FS
tristate "Ext3 journalling file system support"
+ select JBD
help
This is the journaling version of the Second extended file system
(often called ext3), the de facto standard Linux file system
config EXT3_FS_POSIX_ACL
bool "Ext3 POSIX Access Control Lists"
depends on EXT3_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
extended attributes for file security labels, say N.
config JBD
-# CONFIG_JBD could be its own option (even modular), but until there are
-# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
-# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
tristate
- default EXT3_FS
help
This is a generic journaling layer for block devices. It is
- currently used by the ext3 file system, but it could also be used to
- add journal support to other file systems or block devices such as
- RAID or LVM.
+ currently used by the ext3 and OCFS2 file systems, but it could
+ also be used to add journal support to other file systems or block
+ devices such as RAID or LVM.
- If you are using the ext3 file system, you need to say Y here. If
- you are not using ext3 then you will probably want to say N.
+ If you are using the ext3 or OCFS2 file systems, you need to
+ say Y here. If you are not using ext3 OCFS2 then you will probably
+ want to say N.
To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 into the kernel, you cannot
- compile this code as a module.
+ called jbd. If you are compiling ext3 or OCFS2 into the kernel,
+ you cannot compile this code as a module.
config JBD_DEBUG
bool "JBD (ext3) debugging support"
config REISERFS_FS_POSIX_ACL
bool "ReiserFS POSIX Access Control Lists"
depends on REISERFS_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
config JFS_POSIX_ACL
bool "JFS POSIX Access Control Lists"
depends on JFS_FS
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
# Never use this symbol for ifdefs.
#
bool
- depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL || REISERFS_FS_POSIX_ACL || NFSD_V4
- default y
+ default n
source "fs/xfs/Kconfig"
+source "fs/gfs2/Kconfig"
+
+config OCFS2_FS
+ tristate "OCFS2 file system support (EXPERIMENTAL)"
+ depends on NET && SYSFS && EXPERIMENTAL
+ select CONFIGFS_FS
+ select JBD
+ select CRC32
+ select INET
+ help
+ OCFS2 is a general purpose extent based shared disk cluster file
+ system with many similarities to ext3. It supports 64 bit inode
+ numbers, and has automatically extending metadata groups which may
+ also make it attractive for non-clustered use.
+
+ You'll want to install the ocfs2-tools package in order to at least
+ get "mount.ocfs2".
+
+ Project web page: http://oss.oracle.com/projects/ocfs2
+ Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+ Note: Features which OCFS2 does not support yet:
+ - extended attributes
+ - shared writeable mmap
+ - loopback is supported, but data written will not
+ be cluster coherent.
+ - quotas
+ - cluster aware flock
+ - Directory change notification (F_NOTIFY)
+ - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
+ - POSIX ACLs
+ - readpages / writepages (not user visible)
+
+config OCFS2_DEBUG_MASKLOG
+ bool "OCFS2 logging support"
+ depends on OCFS2_FS
+ default y
+ help
+ The ocfs2 filesystem has an extensive logging system. The system
+ allows selection of events to log via files in /sys/o2cb/logmask/.
+ This option will enlarge your kernel, but it allows debugging of
+ ocfs2 filesystem issues.
config MINIX_FS
tristate "Minix fs support"
If you don't know whether you need it, then you don't need it:
answer N.
+config INOTIFY
+ bool "Inotify file change notification support"
+ default y
+ ---help---
+ Say Y here to enable inotify support. Inotify is a file change
+ notification system and a replacement for dnotify. Inotify fixes
+ numerous shortcomings in dnotify and introduces several new features
+ including multiple file events, one-shot support, and unmount
+ notification.
+
+ For more information, see Documentation/filesystems/inotify.txt
+
+ If unsure, say Y.
+
+config INOTIFY_USER
+ bool "Inotify support for userspace"
+ depends on INOTIFY
+ default y
+ ---help---
+ Say Y here to enable inotify support for userspace, including the
+ associated system calls. Inotify allows monitoring of both files and
+ directories via a single open fd. Events are read from the file
+ descriptor, which is also select()- and poll()-able.
+
+ For more information, see Documentation/filesystems/inotify.txt
+
+ If unsure, say Y.
+
config QUOTA
bool "Quota support"
help
usage (also called disk quotas). Currently, it works for the
ext2, ext3, and reiserfs file system. ext3 also supports journalled
quotas for which you don't need to run quotacheck(8) after an unclean
- shutdown. You need additional software in order to use quota support
- (you can download sources from
- <http://www.sf.net/projects/linuxquota/>). For further details, read
- the Quota mini-HOWTO, available from
+ shutdown.
+ For further details, read the Quota mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, or the documentation provided
with the quota tools. Probably the quota support is only useful for
multi user systems. If unsure, say N.
depends on QUOTA
help
This quota format allows using quotas with 32-bit UIDs/GIDs. If you
- need this functionality say Y here. Note that you will need recent
- quota utilities (>= 3.01) for new quota format with this kernel.
+ need this functionality say Y here.
config QUOTACTL
bool
local network, you probably do not need an automounter, and can say
N here.
+config FUSE_FS
+ tristate "Filesystem in Userspace support"
+ help
+ With FUSE it is possible to implement a fully functional filesystem
+ in a userspace program.
+
+ There's also companion library: libfuse. This library along with
+ utilities is available from the FUSE homepage:
+ <http://fuse.sourceforge.net/>
+
+ See <file:Documentation/filesystems/fuse.txt> for more information.
+ See <file:Documentation/Changes> for needed library/utility version.
+
+ If you want to develop a userspace FS, or if you want to use
+ a filesystem based on FUSE, answer Y or M.
+
menu "CD-ROM/DVD Filesystems"
config ISO9660_FS
menu "Pseudo filesystems"
config PROC_FS
- bool "/proc file system support"
+ bool "/proc file system support" if EMBEDDED
+ default y
help
This is a virtual file system providing information about the status
of the system. "Virtual" means that it doesn't take up any space on
bool "/proc/kcore support" if !ARM
depends on PROC_FS && MMU
+config PROC_VMCORE
+ bool "/proc/vmcore support (EXPERIMENTAL)"
+ depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
+ default y
+ help
+ Exports the dump image of crashed kernel in ELF format.
+
config SYSFS
bool "sysfs file system support" if EMBEDDED
default y
Designers of embedded systems may wish to say N here to conserve space.
-config DEVFS_FS
- bool "/dev file system support (OBSOLETE)"
- depends on EXPERIMENTAL
- help
- This is support for devfs, a virtual file system (like /proc) which
- provides the file system interface to device drivers, normally found
- in /dev. Devfs does not depend on major and minor number
- allocations. Device drivers register entries in /dev which then
- appear automatically, which means that the system administrator does
- not have to create character and block special device files in the
- /dev directory using the mknod command (or MAKEDEV script) anymore.
-
- This is work in progress. If you want to use this, you *must* read
- the material in <file:Documentation/filesystems/devfs/>, especially
- the file README there.
-
- Note that devfs no longer manages /dev/pts! If you are using UNIX98
- ptys, you will also need to mount the /dev/pts filesystem (devpts).
-
- Note that devfs has been obsoleted by udev,
- <http://www.kernel.org/pub/linux/utils/kernel/hotplug/>.
- It has been stripped down to a bare minimum and is only provided for
- legacy installations that use its naming scheme which is
- unfortunately different from the names normal Linux installations
- use.
-
- If unsure, say N.
-
-config DEVFS_MOUNT
- bool "Automatically mount at boot"
- depends on DEVFS_FS
- help
- This option appears if you have CONFIG_DEVFS_FS enabled. Setting
- this to 'Y' will make the kernel automatically mount devfs onto /dev
- when the system is booted, before the init thread is started.
- You can override this with the "devfs=nomount" boot option.
-
- If unsure, say N.
-
-config DEVFS_DEBUG
- bool "Debug devfs"
- depends on DEVFS_FS
- help
- If you say Y here, then the /dev file system code will generate
- debugging messages. See the file
- <file:Documentation/filesystems/devfs/boot-options> for more
- details.
-
- If unsure, say N.
-
-config DEVPTS_FS_XATTR
- bool "/dev/pts Extended Attributes"
- depends on UNIX98_PTYS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config DEVPTS_FS_SECURITY
- bool "/dev/pts Security Labels"
- depends on DEVPTS_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the /dev/pts filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
config TMPFS
bool "Virtual memory file system support (former shm fs)"
help
See <file:Documentation/filesystems/tmpfs.txt> for details.
-config TMPFS_XATTR
- bool "tmpfs Extended Attributes"
- depends on TMPFS
+config HUGETLBFS
+ bool "HugeTLB file system support"
+ depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
+ hugetlbfs is a filesystem backing for HugeTLB pages, based on
+ ramfs. For architectures that support it, say Y here and read
+ <file:Documentation/vm/hugetlbpage.txt> for details.
If unsure, say N.
-config TMPFS_SECURITY
- bool "tmpfs Security Labels"
- depends on TMPFS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the tmpfs filesystem.
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config HUGETLBFS
- bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN
-
config HUGETLB_PAGE
def_bool HUGETLBFS
To compile this as a module, choose M here: the module will be called
ramfs.
+config CONFIGFS_FS
+ tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
+ depends on SYSFS && EXPERIMENTAL
+ help
+ configfs is a ram-based filesystem that provides the converse
+ of sysfs's functionality. Where sysfs is a filesystem-based
+ view of kernel objects, configfs is a filesystem-based manager
+ of kernel objects, or config_items.
+
+ Both sysfs and configfs can and should exist together on the
+ same system. One is not a replacement for the other.
+
endmenu
menu "Miscellaneous filesystems"
config HFS_FS
tristate "Apple Macintosh file system support (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ select NLS
help
If you say Y here, you will be able to mount Macintosh-formatted
floppy disks and hard drive partitions with full read-write access.
If reporting bugs, please try to have available a full dump of the
messages at debug level 1 while the misbehaviour was occurring.
-config JFFS2_FS_NAND
- bool "JFFS2 support for NAND flash"
+config JFFS2_FS_WRITEBUFFER
+ bool "JFFS2 write-buffering support"
depends on JFFS2_FS
+ default y
+ help
+ This enables the write-buffering support in JFFS2.
+
+ This functionality is required to support JFFS2 on the following
+ types of flash devices:
+ - NAND flash
+ - NOR flash with transparent ECC
+ - DataFlash
+
+config JFFS2_SUMMARY
+ bool "JFFS2 summary support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
default n
help
- This enables the support for NAND flash in JFFS2. NAND is a newer
- type of flash chip design than the traditional NOR flash, with
- higher density but a handful of characteristics which make it more
- interesting for the file system to use.
+ This feature makes it possible to use summary information
+ for faster filesystem mount.
- Say 'N' unless you have NAND flash.
+ The summary information can be inserted into a filesystem image
+ by the utility 'sumtool'.
-config JFFS2_FS_NOR_ECC
- bool "JFFS2 support for ECC'd NOR flash (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This enables the experimental support for NOR flash with transparent
- ECC for JFFS2. This type of flash chip is not common, however it is
- available from ST Microelectronics.
+ If unsure, say 'N'.
-config JFFS2_FS_DATAFLASH
- bool "JFFS2 support for DataFlash (EXPERIMENTAL)"
+config JFFS2_FS_XATTR
+ bool "JFFS2 XATTR support (EXPERIMENTAL)"
depends on JFFS2_FS && EXPERIMENTAL
default n
help
- This enables the experimental support for JFFS2 on DataFlash devices.
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config JFFS2_FS_POSIX_ACL
+ bool "JFFS2 POSIX Access Control Lists"
+ depends on JFFS2_FS_XATTR
+ default y
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config JFFS2_FS_SECURITY
+ bool "JFFS2 Security Labels"
+ depends on JFFS2_FS_XATTR
+ default y
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the jffs2 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
config JFFS2_COMPRESSION_OPTIONS
bool "Advanced compression options for JFFS2"
default y
help
Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
+ lossless data-compression library for use on virtually any computer
hardware and operating system. See <http://www.gzip.org/zlib/> for
further information.
-
+
Say 'Y' if unsure.
config JFFS2_RTIME
default JFFS2_CMODE_PRIORITY
depends on JFFS2_FS
help
- You can set here the default compression mode of JFFS2 from
+ You can set here the default compression mode of JFFS2 from
the available compression modes. Don't touch if unsure.
config JFFS2_CMODE_NONE
config JFFS2_CMODE_PRIORITY
bool "priority"
help
- Tries the compressors in a predefinied order and chooses the first
+ Tries the compressors in a predefinied order and chooses the first
successful one.
config JFFS2_CMODE_SIZE
bool "size (EXPERIMENTAL)"
help
- Tries all compressors and chooses the one which has the smallest
+ Tries all compressors and chooses the one which has the smallest
result.
endchoice
Say Y here if you want to try writing to UFS partitions. This is
experimental, so you should back up your UFS partitions beforehand.
+config UFS_DEBUG
+ bool "UFS debugging"
+ depends on UFS_FS
+ help
+ If you are experiencing any problems with the UFS filesystem, say
+ Y here. This will result in _many_ additional debugging messages to be
+ written to the system log.
+
endmenu
menu "Network File Systems"
depends on INET
select LOCKD
select SUNRPC
+ select NFS_ACL_SUPPORT if NFS_V3_ACL
help
If you are connected to some other (usually local) Unix computer
(using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
If unsure, say Y.
+config NFS_V3_ACL
+ bool "Provide client support for the NFSv3 ACL protocol extension"
+ depends on NFS_V3
+ help
+ Implement the NFSv3 ACL protocol extension for manipulating POSIX
+ Access Control Lists. The server should also be compiled with
+ the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
+
+ If unsure, say N.
+
config NFS_V4
bool "Provide NFSv4 client support (EXPERIMENTAL)"
depends on NFS_FS && EXPERIMENTAL
select LOCKD
select SUNRPC
select EXPORTFS
+ select NFSD_V2_ACL if NFSD_V3_ACL
+ select NFS_ACL_SUPPORT if NFSD_V2_ACL
+ select NFSD_TCP if NFSD_V4
+ select CRYPTO_MD5 if NFSD_V4
+ select CRYPTO if NFSD_V4
+ select FS_POSIX_ACL if NFSD_V4
help
If you want your Linux box to act as an NFS *server*, so that other
computers on your local network which support NFS can access certain
To compile the NFS server support as a module, choose M here: the
module will be called nfsd. If unsure, say N.
+config NFSD_V2_ACL
+ bool
+ depends on NFSD
+
config NFSD_V3
bool "Provide NFSv3 server support"
depends on NFSD
If you would like to include the NFSv3 server as well as the NFSv2
server, say Y here. If unsure, say Y.
+config NFSD_V3_ACL
+ bool "Provide server support for the NFSv3 ACL protocol extension"
+ depends on NFSD_V3
+ help
+ Implement the NFSv3 ACL protocol extension for manipulating POSIX
+ Access Control Lists on exported file systems. NFS clients should
+ be compiled with the NFSv3 ACL protocol extension; see the
+ CONFIG_NFS_V3_ACL option. If unsure, say N.
+
config NFSD_V4
bool "Provide NFSv4 server support (EXPERIMENTAL)"
depends on NFSD_V3 && EXPERIMENTAL
- select NFSD_TCP
help
If you would like to include the NFSv4 server as well as the NFSv2
and NFSv3 servers, say Y here. This feature is experimental, and
config EXPORTFS
tristate
+config NFS_ACL_SUPPORT
+ tristate
+ select FS_POSIX_ACL
+
+config NFS_COMMON
+ bool
+ depends on NFSD || NFS_FS
+ default y
+
config SUNRPC
tristate
select CRYPTO
select CRYPTO_MD5
select CRYPTO_DES
+ select CRYPTO_CAST5
help
Provides for secure RPC calls by means of a gss-api
mechanism based on the SPKM3 public-key mechanism.
PC operating systems. The CIFS protocol is fully supported by
file servers such as Windows 2000 (including Windows 2003, NT 4
and Windows XP) as well by Samba (which provides excellent CIFS
- server support for Linux and many other operating systems). Currently
- you must use the smbfs client filesystem to access older SMB servers
- such as Windows 9x and OS/2.
+ server support for Linux and many other operating systems). Limited
+ support for Windows ME and similar servers is provided as well.
+ You must use the smbfs client filesystem to access older SMB servers
+ such as OS/2 and DOS.
The intent of the cifs module is to provide an advanced
network file system client for mounting to CIFS compliant servers,
cifs if running only a (Samba) server. It is possible to enable both
smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003
and Samba 3 servers, and smbfs for accessing old servers). If you need
- to mount to Samba or Windows 2003 servers from this machine, say Y.
+ to mount to Samba or Windows from this machine, say Y.
config CIFS_STATS
bool "CIFS statistics"
Enabling this option will cause statistics for each server share
mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
+config CIFS_STATS2
+ bool "Extended statistics"
+ depends on CIFS_STATS
+ help
+ Enabling this option will allow more detailed statistics on SMB
+ request timing to be displayed in /proc/fs/cifs/DebugData and also
+ allow optional logging of slow responses to dmesg (depending on the
+ value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
+ These additional statistics may have a minor effect on performance
+ and memory utilization.
+
+ Unless you are a developer or are doing network performance analysis
+ or tuning, say N.
+
+config CIFS_WEAK_PW_HASH
+ bool "Support legacy servers which use weaker LANMAN security"
+ depends on CIFS
+ help
+ Modern CIFS servers including Samba and most Windows versions
+ (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
+ security mechanisms. These hash the password more securely
+ than the mechanisms used in the older LANMAN version of the
+ SMB protocol needed to establish sessions with old SMB servers.
+
+ Enabling this option allows the cifs module to mount to older
+ LANMAN based servers such as OS/2 and Windows 95, but such
+ mounts may be less secure than mounts using NTLM or more recent
+ security mechanisms if you are on a public network. Unless you
+ have a need to access old SMB servers (and are on a private
+ network) you probably want to say N. Even if this support
+ is enabled in the kernel build, they will not be used
+ automatically. At runtime LANMAN mounts are disabled but
+ can be set to required (or optional) either in
+ /proc/fs/cifs (see fs/cifs/README for more detail) or via an
+ option on the mount command. This support is disabled by
+ default in order to reduce the possibility of a downgrade
+ attack.
+
+ If unsure, say N.
+
config CIFS_XATTR
- bool "CIFS extended attributes (EXPERIMENTAL)"
+ bool "CIFS extended attributes"
depends on CIFS
help
Extended attributes are name:value pairs associated with inodes by
prefaced by the user namespace prefix. The system namespace
(used by some filesystems to store ACLs) is not supported at
this time.
-
+
If unsure, say N.
config CIFS_POSIX
- bool "CIFS POSIX Extensions (EXPERIMENTAL)"
+ bool "CIFS POSIX Extensions"
depends on CIFS_XATTR
help
Enabling this option will cause the cifs client to attempt to
(such as Samba 3.10 and later) which can negotiate
CIFS POSIX ACL support. If unsure, say N.
+config CIFS_DEBUG2
+ bool "Enable additional CIFS debugging routines"
+ depends on CIFS
+ help
+ Enabling this option adds a few more debugging routines
+ to the cifs code which slightly increases the size of
+ the cifs module and can cause additional logging of debug
+ messages in some error paths, slowing performance. This
+ option can be turned off unless you are debugging
+ cifs problems. If unsure, say N.
+
config CIFS_EXPERIMENTAL
bool "CIFS Experimental Features (EXPERIMENTAL)"
- depends on CIFS
+ depends on CIFS && EXPERIMENTAL
+ help
+ Enables cifs features under testing. These features are
+ experimental and currently include support for writepages
+ (multipage writebehind performance improvements) and directory
+ change notification ie fcntl(F_DNOTIFY) as well as some security
+ improvements. Some also depend on setting at runtime the
+ pseudo-file /proc/fs/cifs/Experimental (which is disabled by
+ default). See the file fs/cifs/README for more details.
+
+ If unsure, say N.
+
+config CIFS_UPCALL
+ bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
+ depends on CIFS_EXPERIMENTAL
+ select CONNECTOR
help
- Enables cifs features under testing. These features
- are highly experimental. If unsure, say N.
+ Enables an upcall mechanism for CIFS which will be used to contact
+ userspace helper utilities to provide SPNEGO packaged Kerberos
+ tickets which are needed to mount to certain secure servers
+ (for which more secure Kerberos authentication is required). If
+ unsure, say N.
config NCP_FS
tristate "NCP file system support (to mount NetWare volumes)"
config RXRPC
tristate
+config 9P_FS
+ tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+ depends on INET && EXPERIMENTAL
+ help
+ If you say Y here, you will get experimental support for
+ Plan 9 resource sharing via the 9P2000 protocol.
+
+ See <http://v9fs.sf.net> for more information.
+
+ If unsure, say N.
+
endmenu
menu "Partition Types"
endmenu
source "fs/nls/Kconfig"
+source "fs/dlm/Kconfig"
endmenu
Code Review / linux-2.6.git / blobdiff