video: tegra: host: power module before access
[linux-2.6.git] / firmware / Makefile
index cc25f56..5f43bfb 100644 (file)
@@ -9,13 +9,143 @@ fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
 
 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
 
-# If CONFIG_FIRMWARE_IN_KERNEL is not set, then don't include any firmware
-ifneq ($(CONFIG_FIRMWARE_IN_KERNEL),y)
-fw-shipped-y :=
+# There are three cases to care about:
+# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
+#    include the firmware files to include, according to .config
+# 2. 'make modules_install', which will install firmware for modules, and 
+#    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
+# 3. 'make firmware_install', which installs all firmware, unconditionally.
+
+# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
+# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
+# But be aware that the config file might not be included at all.
+
+ifdef CONFIG_ACENIC_OMIT_TIGON_I
+acenic-objs := acenic/tg2.bin
+fw-shipped- += acenic/tg1.bin
+else
+acenic-objs := acenic/tg1.bin acenic/tg2.bin
+endif
+fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
+fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
+fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
+                                        adaptec/starfire_tx.bin
+fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
+fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \
+                             bnx2x/bnx2x-e1h-6.2.9.0.fw \
+                             bnx2x/bnx2x-e2-6.2.9.0.fw
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
+                            bnx2/bnx2-rv2p-09-6.0.17.fw \
+                            bnx2/bnx2-rv2p-09ax-6.0.17.fw \
+                            bnx2/bnx2-mips-06-6.2.1.fw \
+                            bnx2/bnx2-rv2p-06-6.0.15.fw
+fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
+fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
+fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
+                                  cxgb3/t3c_psram-1.1.0.bin \
+                                  cxgb3/t3fw-7.10.0.bin \
+                                  cxgb3/ael2005_opt_edc.bin \
+                                  cxgb3/ael2005_twx_edc.bin \
+                                  cxgb3/ael2020_twx_edc.bin
+fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw
+fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin
+fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \
+                                  radeon/R300_cp.bin radeon/R420_cp.bin \
+                                  radeon/RS690_cp.bin radeon/RS600_cp.bin \
+                                  radeon/R520_cp.bin \
+                                  radeon/R600_pfp.bin radeon/R600_me.bin \
+                                  radeon/RV610_pfp.bin radeon/RV610_me.bin \
+                                  radeon/RV630_pfp.bin radeon/RV630_me.bin \
+                                  radeon/RV620_pfp.bin radeon/RV620_me.bin \
+                                  radeon/RV635_pfp.bin radeon/RV635_me.bin \
+                                  radeon/RV670_pfp.bin radeon/RV670_me.bin \
+                                  radeon/RS780_pfp.bin radeon/RS780_me.bin \
+                                  radeon/RV770_pfp.bin radeon/RV770_me.bin \
+                                  radeon/RV730_pfp.bin radeon/RV730_me.bin \
+                                  radeon/RV710_pfp.bin radeon/RV710_me.bin
+fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
+fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
+fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
+                            e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
+                                    cis/DP83903.cis cis/NE2K.cis \
+                                    cis/tamarack.cis cis/PE-200.cis \
+                                    cis/PE520.cis
+fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
+fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
+fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
+                                      cis/COMpad2.cis cis/COMpad4.cis \
+                                      cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
+                                      cis/SW_8xx_SER.cis
+fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
+fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
+                                     advansys/3550.bin advansys/38C0800.bin
+fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin
+fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
+                                        qlogic/12160.bin
+fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
+fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
+fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
+fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
+                                    ess/maestro3_assp_minisrc.fw
+fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
+                                    sb16/ima_adpcm_init.csp \
+                                    sb16/ima_adpcm_playback.csp \
+                                    sb16/ima_adpcm_capture.csp
+fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
+                                  yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
+fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
+fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
+                              tigon/tg3_tso5.bin
+fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
+fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
+fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
+                                 emi26/bitstream.fw
+fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
+                                 emi62/spdif.fw emi62/midi.fw
+fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
+                                  kaweth/new_code_fix.bin \
+                                  kaweth/trigger_code_fix.bin
+ifdef CONFIG_FIRMWARE_IN_KERNEL
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
+else
+fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw       \
+       keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw         \
+       keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw          \
+       keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
 endif
+fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
+                                     mts_cdma.fw mts_gsm.fw mts_edge.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
+                                           edgeport/down.fw edgeport/down2.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
+fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
+                                          # whiteheat_loader_debug.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
+fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
+fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
 
-firmware-y    := $(fw-external-y) $(fw-shipped-y)
-firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(firmware-y) $(fw-shipped-))))
+fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+
+# Directories which we _might_ need to create, so we have a rule for them.
+firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all))))
 
 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
       cmd_mkdir = mkdir -p $@
@@ -23,6 +153,12 @@ quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
 quiet_cmd_ihex  = IHEX    $@
       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
 
+quiet_cmd_ihex2fw  = IHEX2FW $@
+      cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
+
+quiet_cmd_h16tofw  = H16TOFW $@
+      cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
+
 quiet_cmd_fwbin = MK_FW   $@
       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";               \
                  FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
@@ -68,20 +204,46 @@ $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
                | $(objtree)/$$(dir %)
        $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
-               include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
+               include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
        $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
 
 # The .o files depend on the binaries directly; the .S files don't.
 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 
+# .ihex is used just as a simple way to hold binary files in a source tree
+# where binaries are frowned upon. They are directly converted with objcopy.
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
        $(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
+# .HEX is also Intel HEX, but where the offset and length in each record
+# is actually meaningful, because the firmware has to be loaded in a certain
+# order rather than as a single binary blob. Thus, we convert them into our
+# more compact binary representation of ihex records (<linux/ihex.h>)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
+       $(call cmd,ihex2fw)
+
+# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
+       $(call cmd,h16tofw)
+
 $(firmware-dirs):
        $(call cmd,mkdir)
 
-obj-y := $(patsubst %,%.gen.o, $(firmware-y))
+obj-y                           += $(patsubst %,%.gen.o, $(fw-external-y))
+obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
 
 # Remove .S files and binaries created from ihex
 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
@@ -91,3 +253,5 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
 # Without this, built-in.o won't be created when it's empty, and the
 # final vmlinux link will fail.
 obj-n := dummy
+
+hostprogs-y := ihex2fw