USB: replace remaining __FUNCTION__ occurrences
[linux-2.6.git] / drivers / usb / serial / ipw.c
index ec0ccd1..bc85ca5 100644 (file)
@@ -169,15 +169,15 @@ static void ipw_read_bulk_callback(struct urb *urb)
        int result;
        int status = urb->status;
 
-       dbg("%s - port %d", __FUNCTION__, port->number);
+       dbg("%s - port %d", __func__, port->number);
 
        if (status) {
                dbg("%s - nonzero read bulk status received: %d",
-                   __FUNCTION__, status);
+                   __func__, status);
                return;
        }
 
-       usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+       usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
        tty = port->tty;
        if (tty && urb->actual_length) {
@@ -195,7 +195,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
                           ipw_read_bulk_callback, port);
        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
        if (result)
-               dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+               dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
        return;
 }
 
@@ -206,7 +206,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
        u8 *buf_flow_init;
        int result;
 
-       dbg("%s", __FUNCTION__);
+       dbg("%s", __func__);
 
        buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
        if (!buf_flow_init)
@@ -217,7 +217,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 
        /* --1: Tell the modem to initialize (we think) From sniffs this is always the
         * first thing that gets sent to the modem during opening of the device */
-       dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
+       dbg("%s: Sending SIO_INIT (we guess)",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
                                 IPW_SIO_INIT,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -234,7 +234,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
        usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
 
        /*--2: Start reading from the device */ 
-       dbg("%s: setting up bulk read callback",__FUNCTION__);
+       dbg("%s: setting up bulk read callback",__func__);
        usb_fill_bulk_urb(port->read_urb, dev,
                          usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
                          port->bulk_in_buffer,
@@ -242,10 +242,10 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
                          ipw_read_bulk_callback, port);
        result = usb_submit_urb(port->read_urb, GFP_KERNEL);
        if (result < 0)
-               dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
+               dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result);
 
        /*--3: Tell the modem to open the floodgates on the rx bulk channel */
-       dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
+       dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_RXCTL,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -258,7 +258,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
                dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
 
        /*--4: setup the initial flowcontrol */
-       dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
+       dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_HANDFLOW,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -272,7 +272,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 
 
        /*--5: raise the dtr */
-       dbg("%s:raising dtr",__FUNCTION__);
+       dbg("%s:raising dtr",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_SET_PIN,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -285,7 +285,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
                dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
 
        /*--6: raise the rts */
-       dbg("%s:raising rts",__FUNCTION__);
+       dbg("%s:raising rts",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_SET_PIN,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -307,12 +307,12 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
        int result;
 
        if (tty_hung_up_p(filp)) {
-               dbg("%s: tty_hung_up_p ...", __FUNCTION__);
+               dbg("%s: tty_hung_up_p ...", __func__);
                return;
        }
 
        /*--1: drop the dtr */
-       dbg("%s:dropping dtr",__FUNCTION__);
+       dbg("%s:dropping dtr",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_SET_PIN,
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -325,7 +325,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
                dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
 
        /*--2: drop the rts */
-       dbg("%s:dropping rts",__FUNCTION__);
+       dbg("%s:dropping rts",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
                                 IPW_PIN_CLRRTS,
@@ -338,7 +338,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 
 
        /*--3: purge */
-       dbg("%s:sending purge",__FUNCTION__);
+       dbg("%s:sending purge",__func__);
        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
                                 0x03,
@@ -373,13 +373,13 @@ static void ipw_write_bulk_callback(struct urb *urb)
        struct usb_serial_port *port = urb->context;
        int status = urb->status;
 
-       dbg("%s", __FUNCTION__);
+       dbg("%s", __func__);
 
        port->write_urb_busy = 0;
 
        if (status)
                dbg("%s - nonzero write bulk status received: %d",
-                   __FUNCTION__, status);
+                   __func__, status);
 
        usb_serial_port_softint(port);
 }
@@ -389,18 +389,18 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int
        struct usb_device *dev = port->serial->dev;
        int ret;
 
-       dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
+       dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
                count, in_interrupt() );
 
        if (count == 0) {
-               dbg("%s - write request of 0 bytes", __FUNCTION__);
+               dbg("%s - write request of 0 bytes", __func__);
                return 0;
        }
 
        spin_lock_bh(&port->lock);
        if (port->write_urb_busy) {
                spin_unlock_bh(&port->lock);
-               dbg("%s - already writing", __FUNCTION__);
+               dbg("%s - already writing", __func__);
                return 0;
        }
        port->write_urb_busy = 1;
@@ -409,7 +409,7 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int
        count = min(count, port->bulk_out_size);
        memcpy(port->bulk_out_buffer, buf, count);
 
-       dbg("%s count now:%d", __FUNCTION__, count);
+       dbg("%s count now:%d", __func__, count);
 
        usb_fill_bulk_urb(port->write_urb, dev,
                          usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
@@ -421,11 +421,11 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int
        ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
        if (ret != 0) {
                port->write_urb_busy = 0;
-               dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
+               dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret);
                return ret;
        }
 
-       dbg("%s returning %d", __FUNCTION__, count);
+       dbg("%s returning %d", __func__, count);
        return count;
 }