spi: tegra: Fixed spi slave CS polarity
[linux-2.6.git] / drivers / spi / Makefile
index e01104d..c792388 100644 (file)
@@ -2,30 +2,61 @@
 # Makefile for kernel SPI drivers.
 #
 
-ifeq ($(CONFIG_SPI_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
 
 # small core, mostly translating board-specific
 # config declarations into driver model code
 obj-$(CONFIG_SPI_MASTER)               += spi.o
+obj-$(CONFIG_SPI_SPIDEV)               += spidev.o
 
 # SPI master controller drivers (bus)
-obj-$(CONFIG_SPI_BITBANG)              += spi_bitbang.o
-obj-$(CONFIG_SPI_BUTTERFLY)            += spi_butterfly.o
-obj-$(CONFIG_SPI_IMX)                  += spi_imx.o
-obj-$(CONFIG_SPI_PXA2XX)               += pxa2xx_spi.o
-obj-$(CONFIG_SPI_OMAP_UWIRE)           += omap_uwire.o
-obj-$(CONFIG_SPI_MPC83xx)              += spi_mpc83xx.o
-obj-$(CONFIG_SPI_S3C24XX_GPIO)         += spi_s3c24xx_gpio.o
-obj-$(CONFIG_SPI_S3C24XX)              += spi_s3c24xx.o
-#      ... add above this line ...
+obj-$(CONFIG_SPI_ALTERA)               += spi-altera.o
+obj-$(CONFIG_SPI_ATMEL)                        += spi-atmel.o
+obj-$(CONFIG_SPI_ATH79)                        += spi-ath79.o
+obj-$(CONFIG_SPI_AU1550)               += spi-au1550.o
+obj-$(CONFIG_SPI_BFIN)                 += spi-bfin5xx.o
+obj-$(CONFIG_SPI_BFIN_SPORT)           += spi-bfin-sport.o
+obj-$(CONFIG_SPI_BITBANG)              += spi-bitbang.o
+obj-$(CONFIG_SPI_BUTTERFLY)            += spi-butterfly.o
+obj-$(CONFIG_SPI_COLDFIRE_QSPI)                += spi-coldfire-qspi.o
+obj-$(CONFIG_SPI_DAVINCI)              += spi-davinci.o
+obj-$(CONFIG_SPI_DESIGNWARE)           += spi-dw.o
+obj-$(CONFIG_SPI_DW_MMIO)              += spi-dw-mmio.o
+obj-$(CONFIG_SPI_DW_PCI)               += spi-dw-midpci.o
+spi-dw-midpci-objs                     := spi-dw-pci.o spi-dw-mid.o
+obj-$(CONFIG_SPI_EP93XX)               += spi-ep93xx.o
+obj-$(CONFIG_SPI_FSL_LIB)              += spi-fsl-lib.o
+obj-$(CONFIG_SPI_FSL_ESPI)             += spi-fsl-espi.o
+obj-$(CONFIG_SPI_FSL_SPI)              += spi-fsl-spi.o
+obj-$(CONFIG_SPI_GPIO)                 += spi-gpio.o
+obj-$(CONFIG_SPI_IMX)                  += spi-imx.o
+obj-$(CONFIG_SPI_LM70_LLP)             += spi-lm70llp.o
+obj-$(CONFIG_SPI_MPC512x_PSC)          += spi-mpc512x-psc.o
+obj-$(CONFIG_SPI_MPC52xx_PSC)          += spi-mpc52xx-psc.o
+obj-$(CONFIG_SPI_MPC52xx)              += spi-mpc52xx.o
+obj-$(CONFIG_SPI_NUC900)               += spi-nuc900.o
+obj-$(CONFIG_SPI_OC_TINY)              += spi-oc-tiny.o
+obj-$(CONFIG_SPI_OMAP_UWIRE)           += spi-omap-uwire.o
+obj-$(CONFIG_SPI_OMAP_100K)            += spi-omap-100k.o
+obj-$(CONFIG_SPI_OMAP24XX)             += spi-omap2-mcspi.o
+obj-$(CONFIG_SPI_ORION)                        += spi-orion.o
+obj-$(CONFIG_SPI_PL022)                        += spi-pl022.o
+obj-$(CONFIG_SPI_PPC4xx)               += spi-ppc4xx.o
+obj-$(CONFIG_SPI_PXA2XX)               += spi-pxa2xx.o
+obj-$(CONFIG_SPI_PXA2XX_PCI)           += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_S3C24XX)              += spi-s3c24xx-hw.o
+spi-s3c24xx-hw-y                       := spi-s3c24xx.o
+spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C64XX)              += spi-s3c64xx.o
+obj-$(CONFIG_SPI_SH)                   += spi-sh.o
+obj-$(CONFIG_SPI_SH_MSIOF)             += spi-sh-msiof.o
+obj-$(CONFIG_SPI_SH_SCI)               += spi-sh-sci.o
+obj-$(CONFIG_SPI_STMP3XXX)             += spi-stmp.o
+obj-$(CONFIG_SPI_TEGRA)                        += spi-tegra.o
+obj-$(CONFIG_SPI_SLAVE_TEGRA)          += spi_slave_tegra.o
+obj-$(CONFIG_SPI_TI_SSP)               += spi-ti-ssp.o
+obj-$(CONFIG_SPI_TLE62X0)              += spi-tle62x0.o
+obj-$(CONFIG_SPI_TOPCLIFF_PCH)         += spi-topcliff-pch.o
+obj-$(CONFIG_SPI_TXX9)                 += spi-txx9.o
+obj-$(CONFIG_SPI_XILINX)               += spi-xilinx.o
 
-# SPI protocol drivers (device/link on bus)
-#      ... add above this line ...
-
-# SPI slave controller drivers (upstream link)
-#      ... add above this line ...
-
-# SPI slave drivers (protocol for that link)
-#      ... add above this line ...