/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2005 QLogic Corporation
+ * Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/firmware.h>
-#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
-/* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
-#ifndef EXT_IS_LUN_BIT_SET
-#define EXT_IS_LUN_BIT_SET(P,L) \
- (((P)->mask[L/8] & (0x80 >> (L%8)))?1:0)
-#define EXT_SET_LUN_BIT(P,L) \
- ((P)->mask[L/8] |= (0x80 >> (L%8)))
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
#endif
/*
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
-static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
static int qla2x00_restart_isp(scsi_qla_host_t *);
+static int qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev);
+
+static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
+static int qla84xx_init_chip(scsi_qla_host_t *);
+
/****************************************************************************/
/* QLogic ISP2x00 Hardware Support Functions. */
/****************************************************************************/
qla2x00_initialize_adapter(scsi_qla_host_t *ha)
{
int rval;
- uint8_t restart_risc = 0;
- uint8_t retry;
- uint32_t wait_time;
/* Clear adapter flags. */
ha->flags.online = 0;
ha->flags.reset_active = 0;
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&ha->loop_state, LOOP_DOWN);
- ha->device_flags = 0;
+ ha->device_flags = DFLG_NO_CABLE;
ha->dpc_flags = 0;
ha->flags.management_server_logged_in = 0;
ha->marker_needed = 0;
set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
- rval = ha->isp_ops.pci_config(ha);
+ rval = ha->isp_ops->pci_config(ha);
if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to configure PCI space=n",
+ DEBUG2(printk("scsi(%ld): Unable to configure PCI space.\n",
ha->host_no));
return (rval);
}
- ha->isp_ops.reset_chip(ha);
-
- qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
-
- ha->isp_ops.nvram_config(ha);
-
- qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
-
- retry = 10;
- /*
- * Try to configure the loop.
- */
- do {
- restart_risc = 0;
-
- /* If firmware needs to be loaded */
- if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
- if ((rval = ha->isp_ops.chip_diag(ha)) == QLA_SUCCESS) {
- rval = qla2x00_setup_chip(ha);
- }
- }
+ ha->isp_ops->reset_chip(ha);
- if (rval == QLA_SUCCESS &&
- (rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) {
-check_fw_ready_again:
- /*
- * Wait for a successful LIP up to a maximum
- * of (in seconds): RISC login timeout value,
- * RISC retry count value, and port down retry
- * value OR a minimum of 4 seconds OR If no
- * cable, only 5 seconds.
- */
- rval = qla2x00_fw_ready(ha);
- if (rval == QLA_SUCCESS) {
- clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
+ ha->isp_ops->get_flash_version(ha, ha->request_ring);
- /* Issue a marker after FW becomes ready. */
- qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+ qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
- /*
- * Wait at most MAX_TARGET RSCNs for a stable
- * link.
- */
- wait_time = 256;
- do {
- clear_bit(LOOP_RESYNC_NEEDED,
- &ha->dpc_flags);
- rval = qla2x00_configure_loop(ha);
+ ha->isp_ops->nvram_config(ha);
- if (test_and_clear_bit(ISP_ABORT_NEEDED,
- &ha->dpc_flags)) {
- restart_risc = 1;
- break;
- }
+ if (ha->flags.disable_serdes) {
+ /* Mask HBA via NVRAM settings? */
+ qla_printk(KERN_INFO, ha, "Masking HBA WWPN "
+ "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n",
+ ha->port_name[0], ha->port_name[1],
+ ha->port_name[2], ha->port_name[3],
+ ha->port_name[4], ha->port_name[5],
+ ha->port_name[6], ha->port_name[7]);
+ return QLA_FUNCTION_FAILED;
+ }
- /*
- * If loop state change while we were
- * discoverying devices then wait for
- * LIP to complete
- */
+ qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
- if (atomic_read(&ha->loop_state) !=
- LOOP_READY && retry--) {
- goto check_fw_ready_again;
- }
- wait_time--;
- } while (!atomic_read(&ha->loop_down_timer) &&
- retry &&
- wait_time &&
- (test_bit(LOOP_RESYNC_NEEDED,
- &ha->dpc_flags)));
-
- if (wait_time == 0)
- rval = QLA_FUNCTION_FAILED;
- } else if (ha->device_flags & DFLG_NO_CABLE)
- /* If no cable, then all is good. */
- rval = QLA_SUCCESS;
+ if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
+ rval = ha->isp_ops->chip_diag(ha);
+ if (rval)
+ return (rval);
+ rval = qla2x00_setup_chip(ha);
+ if (rval)
+ return (rval);
+ qla2xxx_get_flash_info(ha);
+ }
+ if (IS_QLA84XX(ha)) {
+ ha->cs84xx = qla84xx_get_chip(ha);
+ if (!ha->cs84xx) {
+ qla_printk(KERN_ERR, ha,
+ "Unable to configure ISP84XX.\n");
+ return QLA_FUNCTION_FAILED;
}
- } while (restart_risc && retry--);
-
- if (rval == QLA_SUCCESS) {
- clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
- qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
- ha->marker_needed = 0;
-
- ha->flags.online = 1;
- } else {
- DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
}
+ rval = qla2x00_init_rings(ha);
return (rval);
}
int
qla2100_pci_config(scsi_qla_host_t *ha)
{
- uint16_t w, mwi;
+ uint16_t w;
uint32_t d;
unsigned long flags;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
pci_set_master(ha->pdev);
- mwi = 0;
- if (pci_set_mwi(ha->pdev))
- mwi = PCI_COMMAND_INVALIDATE;
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
+ pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
- w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/* Reset expansion ROM address decode enable */
int
qla2300_pci_config(scsi_qla_host_t *ha)
{
- uint16_t w, mwi;
+ uint16_t w;
uint32_t d;
unsigned long flags = 0;
uint32_t cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
pci_set_master(ha->pdev);
- mwi = 0;
- if (pci_set_mwi(ha->pdev))
- mwi = PCI_COMMAND_INVALIDATE;
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
+ pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
- w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
if (IS_QLA2322(ha) || IS_QLA6322(ha))
w &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/*
* If this is a 2300 card and not 2312, reset the
ha->fb_rev = RD_FB_CMD_REG(ha, reg);
if (ha->fb_rev == FPM_2300)
- w &= ~PCI_COMMAND_INVALIDATE;
+ pci_clear_mwi(ha->pdev);
/* Deselect FPM registers. */
WRT_REG_WORD(®->ctrl_status, 0x0);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
- pci_write_config_word(ha->pdev, PCI_COMMAND, w);
pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
int
qla24xx_pci_config(scsi_qla_host_t *ha)
{
- uint16_t w, mwi;
+ uint16_t w;
uint32_t d;
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
- int pcix_cmd_reg, pcie_dctl_reg;
pci_set_master(ha->pdev);
- mwi = 0;
- if (pci_set_mwi(ha->pdev))
- mwi = PCI_COMMAND_INVALIDATE;
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
+ pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
- w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
w &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
/* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
- pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX);
- if (pcix_cmd_reg) {
- uint16_t pcix_cmd;
-
- pcix_cmd_reg += PCI_X_CMD;
- pci_read_config_word(ha->pdev, pcix_cmd_reg, &pcix_cmd);
- pcix_cmd &= ~PCI_X_CMD_MAX_READ;
- pcix_cmd |= 0x0008;
- pci_write_config_word(ha->pdev, pcix_cmd_reg, pcix_cmd);
- }
+ if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
+ pcix_set_mmrbc(ha->pdev, 2048);
/* PCIe -- adjust Maximum Read Request Size (2048). */
- pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
- if (pcie_dctl_reg) {
- uint16_t pcie_dctl;
-
- pcie_dctl_reg += PCI_EXP_DEVCTL;
- pci_read_config_word(ha->pdev, pcie_dctl_reg, &pcie_dctl);
- pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ;
- pcie_dctl |= 0x4000;
- pci_write_config_word(ha->pdev, pcie_dctl_reg, pcie_dctl);
- }
+ if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ pcie_set_readrq(ha->pdev, 2048);
/* Reset expansion ROM address decode enable */
pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
d &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+ ha->chip_revision = ha->pdev->revision;
+
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->pci_attr = RD_REG_DWORD(®->ctrl_status);
return QLA_SUCCESS;
}
+/**
+ * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla25xx_pci_config(scsi_qla_host_t *ha)
+{
+ uint16_t w;
+ uint32_t d;
+
+ pci_set_master(ha->pdev);
+ pci_try_set_mwi(ha->pdev);
+
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+ w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+
+ /* PCIe -- adjust Maximum Read Request Size (2048). */
+ if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ pcie_set_readrq(ha->pdev, 2048);
+
+ /* Reset expansion ROM address decode enable */
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+
+ ha->chip_revision = ha->pdev->revision;
+
+ return QLA_SUCCESS;
+}
+
/**
* qla2x00_isp_firmware() - Choose firmware image.
* @ha: HA context
qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
/* Verify checksum of loaded RISC code. */
- rval = qla2x00_verify_checksum(ha,
- IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
- *ha->brd_info->fw_info[0].fwstart);
+ rval = qla2x00_verify_checksum(ha, ha->fw_srisc_address);
}
if (rval) {
unsigned long flags = 0;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t cnt;
- unsigned long mbx_flags = 0;
uint16_t cmd;
- ha->isp_ops.disable_intrs(ha);
+ ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
for (cnt = 0; cnt < 30000; cnt++) {
- if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)))
- spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
-
- if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY) {
- if (!(test_bit(ABORT_ISP_ACTIVE,
- &ha->dpc_flags)))
- spin_unlock_irqrestore(
- &ha->mbx_reg_lock, mbx_flags);
+ if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY)
break;
- }
-
- if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)))
- spin_unlock_irqrestore(&ha->mbx_reg_lock,
- mbx_flags);
udelay(100);
}
static inline void
qla24xx_reset_risc(scsi_qla_host_t *ha)
{
+ int hw_evt = 0;
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
uint32_t cnt, d2;
d2 = (uint32_t) RD_REG_WORD(®->mailbox0);
barrier();
}
+ if (cnt == 0)
+ hw_evt = 1;
/* Wait for soft-reset to complete. */
d2 = RD_REG_DWORD(®->ctrl_status);
d2 = RD_REG_DWORD(®->ctrl_status);
barrier();
}
+ if (cnt == 0 || hw_evt)
+ qla2xxx_hw_event_log(ha, HW_EVENT_RESET_ERR,
+ RD_REG_WORD(®->mailbox1), RD_REG_WORD(®->mailbox2),
+ RD_REG_WORD(®->mailbox3));
WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET);
RD_REG_DWORD(®->hccr);
void
qla24xx_reset_chip(scsi_qla_host_t *ha)
{
- ha->isp_ops.disable_intrs(ha);
+ ha->isp_ops->disable_intrs(ha);
/* Perform RISC reset. */
qla24xx_reset_risc(ha);
DEBUG3(printk("scsi(%ld): Found QLA2200A chip.\n",
ha->host_no));
+ ha->device_type |= DT_ISP2200A;
ha->fw_transfer_size = 128;
}
return rval;
}
-static void
+void
qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
{
+ int rval;
+ uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
+ eft_size, fce_size;
+ dma_addr_t tc_dma;
+ void *tc;
+
+ if (ha->fw_dump) {
+ qla_printk(KERN_WARNING, ha,
+ "Firmware dump previously allocated.\n");
+ return;
+ }
+
ha->fw_dumped = 0;
- ha->fw_dump24_len = sizeof(struct qla24xx_fw_dump);
- ha->fw_dump24_len += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
- ha->fw_dump24 = vmalloc(ha->fw_dump24_len);
- if (ha->fw_dump24)
- qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
- "dump...\n", ha->fw_dump24_len / 1024);
- else
+ fixed_size = mem_size = eft_size = fce_size = 0;
+ if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
+ fixed_size = sizeof(struct qla2100_fw_dump);
+ } else if (IS_QLA23XX(ha)) {
+ fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
+ mem_size = (ha->fw_memory_size - 0x11000 + 1) *
+ sizeof(uint16_t);
+ } else if (IS_FWI2_CAPABLE(ha)) {
+ fixed_size = IS_QLA25XX(ha) ?
+ offsetof(struct qla25xx_fw_dump, ext_mem):
+ offsetof(struct qla24xx_fw_dump, ext_mem);
+ mem_size = (ha->fw_memory_size - 0x100000 + 1) *
+ sizeof(uint32_t);
+
+ /* Allocate memory for Extended Trace Buffer. */
+ tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
+ GFP_KERNEL);
+ if (!tc) {
+ qla_printk(KERN_WARNING, ha, "Unable to allocate "
+ "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+ goto cont_alloc;
+ }
+
+ memset(tc, 0, EFT_SIZE);
+ rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha, "Unable to initialize "
+ "EFT (%d).\n", rval);
+ dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
+ tc_dma);
+ goto cont_alloc;
+ }
+
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
+ EFT_SIZE / 1024);
+
+ eft_size = EFT_SIZE;
+ ha->eft_dma = tc_dma;
+ ha->eft = tc;
+
+ /* Allocate memory for Fibre Channel Event Buffer. */
+ if (!IS_QLA25XX(ha))
+ goto cont_alloc;
+
+ tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
+ GFP_KERNEL);
+ if (!tc) {
+ qla_printk(KERN_WARNING, ha, "Unable to allocate "
+ "(%d KB) for FCE.\n", FCE_SIZE / 1024);
+ goto cont_alloc;
+ }
+
+ memset(tc, 0, FCE_SIZE);
+ rval = qla2x00_enable_fce_trace(ha, tc_dma, FCE_NUM_BUFFERS,
+ ha->fce_mb, &ha->fce_bufs);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha, "Unable to initialize "
+ "FCE (%d).\n", rval);
+ dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
+ tc_dma);
+ ha->flags.fce_enabled = 0;
+ goto cont_alloc;
+ }
+
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
+ FCE_SIZE / 1024);
+
+ fce_size = sizeof(struct qla2xxx_fce_chain) + EFT_SIZE;
+ ha->flags.fce_enabled = 1;
+ ha->fce_dma = tc_dma;
+ ha->fce = tc;
+ }
+cont_alloc:
+ req_q_size = ha->request_q_length * sizeof(request_t);
+ rsp_q_size = ha->response_q_length * sizeof(response_t);
+
+ dump_size = offsetof(struct qla2xxx_fw_dump, isp);
+ dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
+ eft_size + fce_size;
+
+ ha->fw_dump = vmalloc(dump_size);
+ if (!ha->fw_dump) {
qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
- "firmware dump!!!\n", ha->fw_dump24_len / 1024);
+ "firmware dump!!!\n", dump_size / 1024);
+
+ if (ha->eft) {
+ dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
+ ha->eft_dma);
+ ha->eft = NULL;
+ ha->eft_dma = 0;
+ }
+ return;
+ }
+
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
+ dump_size / 1024);
+
+ ha->fw_dump_len = dump_size;
+ ha->fw_dump->signature[0] = 'Q';
+ ha->fw_dump->signature[1] = 'L';
+ ha->fw_dump->signature[2] = 'G';
+ ha->fw_dump->signature[3] = 'C';
+ ha->fw_dump->version = __constant_htonl(1);
+
+ ha->fw_dump->fixed_size = htonl(fixed_size);
+ ha->fw_dump->mem_size = htonl(mem_size);
+ ha->fw_dump->req_q_size = htonl(req_q_size);
+ ha->fw_dump->rsp_q_size = htonl(rsp_q_size);
+
+ ha->fw_dump->eft_size = htonl(eft_size);
+ ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
+ ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));
+
+ ha->fw_dump->header_size =
+ htonl(offsetof(struct qla2xxx_fw_dump, isp));
}
/**
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
- qla2x00_alloc_fw_dump(ha);
-
/* Retrieve IOCB counts available to the firmware. */
- rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt);
+ rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt,
+ &ha->max_npiv_vports);
if (rval)
return;
/* No point in continuing if current settings are sufficient. */
{
int rval;
uint32_t srisc_address = 0;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ unsigned long flags;
+
+ if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
+ /* Disable SRAM, Instruction RAM and GP RAM parity. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0));
+ RD_REG_WORD(®->hccr);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ }
/* Load firmware sequences */
- rval = ha->isp_ops.load_risc(ha, &srisc_address);
+ rval = ha->isp_ops->load_risc(ha, &srisc_address);
if (rval == QLA_SUCCESS) {
DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
"code.\n", ha->host_no));
&ha->fw_subminor_version,
&ha->fw_attributes, &ha->fw_memory_size);
qla2x00_resize_request_q(ha);
+ ha->flags.npiv_supported = 0;
+ if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
+ (ha->fw_attributes & BIT_2)) {
+ ha->flags.npiv_supported = 1;
+ if ((!ha->max_npiv_vports) ||
+ ((ha->max_npiv_vports + 1) %
+ MIN_MULTI_ID_FABRIC))
+ ha->max_npiv_vports =
+ MIN_MULTI_ID_FABRIC - 1;
+ }
+
+ if (ql2xallocfwdump)
+ qla2x00_alloc_fw_dump(ha);
}
} else {
DEBUG2(printk(KERN_INFO
}
}
+ if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
+ /* Enable proper parity. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x1);
+ else
+ /* SRAM, Instruction RAM and GP RAM parity */
+ WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x7);
+ RD_REG_WORD(®->hccr);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ }
+
if (rval) {
DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
ha->host_no));
if (ha->flags.enable_led_scheme)
ha->fw_options[2] |= BIT_12;
+ /* Detect ISP6312. */
+ if (IS_QLA6312(ha))
+ ha->fw_options[2] |= BIT_13;
+
/* Update firmware options. */
qla2x00_set_fw_options(ha, ha->fw_options);
}
int rval;
/* Update Serial Link options. */
- if ((ha->fw_seriallink_options24[0] & BIT_0) == 0)
+ if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
return;
- rval = qla2x00_set_serdes_params(ha, ha->fw_seriallink_options24[1],
- ha->fw_seriallink_options24[2], ha->fw_seriallink_options24[3]);
+ rval = qla2x00_set_serdes_params(ha,
+ le16_to_cpu(ha->fw_seriallink_options24[1]),
+ le16_to_cpu(ha->fw_seriallink_options24[2]),
+ le16_to_cpu(ha->fw_seriallink_options24[3]));
if (rval != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to update Serial Link options (%x).\n", rval);
int rval;
unsigned long flags = 0;
int cnt;
+ struct mid_init_cb_24xx *mid_init_cb =
+ (struct mid_init_cb_24xx *) ha->init_cb;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Initialize response queue entries */
qla2x00_init_response_q_entries(ha);
- ha->isp_ops.config_rings(ha);
+ ha->isp_ops->config_rings(ha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Update any ISP specific firmware options before initialization. */
- ha->isp_ops.update_fw_options(ha);
+ ha->isp_ops->update_fw_options(ha);
DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
+
+ if (ha->flags.npiv_supported)
+ mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+
+ mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
+
rval = qla2x00_init_firmware(ha, ha->init_cb_size);
if (rval) {
DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
qla2x00_fw_ready(scsi_qla_host_t *ha)
{
int rval;
- unsigned long wtime, mtime;
+ unsigned long wtime, mtime, cs84xx_time;
uint16_t min_wait; /* Minimum wait time if loop is down */
uint16_t wait_time; /* Wait time if loop is coming ready */
- uint16_t fw_state;
+ uint16_t state[3];
rval = QLA_SUCCESS;
ha->host_no));
do {
- rval = qla2x00_get_firmware_state(ha, &fw_state);
+ rval = qla2x00_get_firmware_state(ha, state);
if (rval == QLA_SUCCESS) {
- if (fw_state < FSTATE_LOSS_OF_SYNC) {
+ if (state[0] < FSTATE_LOSS_OF_SYNC) {
ha->device_flags &= ~DFLG_NO_CABLE;
}
- if (fw_state == FSTATE_READY) {
+ if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
+ DEBUG16(printk("scsi(%ld): fw_state=%x "
+ "84xx=%x.\n", ha->host_no, state[0],
+ state[2]));
+ if ((state[2] & FSTATE_LOGGED_IN) &&
+ (state[2] & FSTATE_WAITING_FOR_VERIFY)) {
+ DEBUG16(printk("scsi(%ld): Sending "
+ "verify iocb.\n", ha->host_no));
+
+ cs84xx_time = jiffies;
+ rval = qla84xx_init_chip(ha);
+ if (rval != QLA_SUCCESS)
+ break;
+
+ /* Add time taken to initialize. */
+ cs84xx_time = jiffies - cs84xx_time;
+ wtime += cs84xx_time;
+ mtime += cs84xx_time;
+ DEBUG16(printk("scsi(%ld): Increasing "
+ "wait time by %ld. New time %ld\n",
+ ha->host_no, cs84xx_time, wtime));
+ }
+ } else if (state[0] == FSTATE_READY) {
DEBUG(printk("scsi(%ld): F/W Ready - OK \n",
ha->host_no));
rval = QLA_FUNCTION_FAILED;
if (atomic_read(&ha->loop_down_timer) &&
- (fw_state >= FSTATE_LOSS_OF_SYNC ||
- fw_state == FSTATE_WAIT_AL_PA)) {
+ state[0] != FSTATE_READY) {
/* Loop down. Timeout on min_wait for states
* other than Wait for Login.
*/
msleep(500);
DEBUG3(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
- ha->host_no, fw_state, jiffies));
+ ha->host_no, state[0], jiffies));
} while (1);
DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
- ha->host_no, fw_state, jiffies));
+ ha->host_no, state[0], jiffies));
if (rval) {
DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
int rval;
uint16_t loop_id;
uint16_t topo;
+ uint16_t sw_cap;
uint8_t al_pa;
uint8_t area;
uint8_t domain;
/* Get host addresses. */
rval = qla2x00_get_adapter_id(ha,
- &loop_id, &al_pa, &area, &domain, &topo);
+ &loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
if (rval != QLA_SUCCESS) {
- if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) ||
+ if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
(rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
__func__, ha->host_no));
/* initialize */
ha->min_external_loopid = SNS_FIRST_LOOP_ID;
ha->operating_mode = LOOP;
+ ha->switch_cap = 0;
switch (topo) {
case 0:
case 1:
DEBUG3(printk("scsi(%ld): HBA in FL topology.\n",
ha->host_no));
+ ha->switch_cap = sw_cap;
ha->current_topology = ISP_CFG_FL;
strcpy(connect_type, "(FL_Port)");
break;
case 3:
DEBUG3(printk("scsi(%ld): HBA in F P2P topology.\n",
ha->host_no));
+ ha->switch_cap = sw_cap;
ha->operating_mode = P2P;
ha->current_topology = ISP_CFG_F;
strcpy(connect_type, "(F_Port)");
return(rval);
}
+static inline void
+qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *def)
+{
+ char *st, *en;
+ uint16_t index;
+
+ if (memcmp(model, BINZERO, len) != 0) {
+ strncpy(ha->model_number, model, len);
+ st = en = ha->model_number;
+ en += len - 1;
+ while (en > st) {
+ if (*en != 0x20 && *en != 0x00)
+ break;
+ *en-- = '\0';
+ }
+
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ index < QLA_MODEL_NAMES)
+ ha->model_desc = qla2x00_model_name[index * 2 + 1];
+ } else {
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ index < QLA_MODEL_NAMES) {
+ strcpy(ha->model_number,
+ qla2x00_model_name[index * 2]);
+ ha->model_desc = qla2x00_model_name[index * 2 + 1];
+ } else {
+ strcpy(ha->model_number, def);
+ }
+ }
+}
+
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+ const u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
/*
* NVRAM configuration for ISP 2xxx
*
uint16_t cnt;
uint8_t *dptr1, *dptr2;
init_cb_t *icb = ha->init_cb;
- nvram_t *nv = (nvram_t *)ha->request_ring;
- uint8_t *ptr = (uint8_t *)ha->request_ring;
+ nvram_t *nv = ha->nvram;
+ uint8_t *ptr = ha->nvram;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
rval = QLA_SUCCESS;
ha->nvram_base = 0x80;
/* Get NVRAM data and calculate checksum. */
- ha->isp_ops.read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size);
+ ha->isp_ops->read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size);
for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- ha->nvram_size));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
"invalid -- WWPN) defaults.\n");
+ if (chksum)
+ qla2xxx_hw_event_log(ha, HW_EVENT_NVRAM_CHKSUM_ERR, 0,
+ MSW(chksum), LSW(chksum));
+
/*
* Set default initialization control block.
*/
nv->port_name[3] = 224;
nv->port_name[4] = 139;
+ qla2xxx_nvram_wwn_from_ofw(ha, nv);
+
nv->login_timeout = 4;
/*
strcpy(ha->model_number, "QLA2300");
}
} else {
- if (rval == 0 &&
- memcmp(nv->model_number, BINZERO,
- sizeof(nv->model_number)) != 0) {
- char *st, *en;
-
- strncpy(ha->model_number, nv->model_number,
- sizeof(nv->model_number));
- st = en = ha->model_number;
- en += sizeof(nv->model_number) - 1;
- while (en > st) {
- if (*en != 0x20 && *en != 0x00)
- break;
- *en-- = '\0';
- }
- } else {
- uint16_t index;
-
- index = (ha->pdev->subsystem_device & 0xff);
- if (index < QLA_MODEL_NAMES) {
- strcpy(ha->model_number,
- qla2x00_model_name[index]);
- ha->model_desc =
- qla2x00_model_desc[index];
- } else {
- strcpy(ha->model_number, "QLA23xx");
- }
- }
+ qla2x00_set_model_info(ha, nv->model_number,
+ sizeof(nv->model_number), "QLA23xx");
}
} else if (IS_QLA2200(ha)) {
nv->firmware_options[0] |= BIT_2;
while (cnt--)
*dptr1++ = *dptr2++;
+ /* Use alternate WWN? */
+ if (nv->host_p[1] & BIT_7) {
+ memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
+ memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
+ }
+
/* Prepare nodename */
if ((icb->firmware_options[1] & BIT_6) == 0) {
/*
/*
* Set host adapter parameters.
*/
+ if (nv->host_p[0] & BIT_7)
+ ql2xextended_error_logging = 1;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
+ ha->flags.disable_serdes = 0;
ha->operating_mode =
(icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->login_timeout = nv->login_timeout;
icb->login_timeout = nv->login_timeout;
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
"delay (%d us).\n", ha->host_no, ha->zio_mode,
ha->zio_timer * 100));
return (rval);
}
-static void
-qla2x00_rport_add(void *data)
-{
- fc_port_t *fcport = data;
-
- qla2x00_reg_remote_port(fcport->ha, fcport);
-}
-
static void
qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
+ struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport)
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ rport = fcport->drport;
+ fcport->drport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ if (rport)
+ fc_remote_port_delete(rport);
}
/**
*
* Returns a pointer to the allocated fcport, or NULL, if none available.
*/
-fc_port_t *
+static fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
{
fc_port_t *fcport;
- fcport = kmalloc(sizeof(fc_port_t), flags);
- if (fcport == NULL)
- return (fcport);
+ fcport = kzalloc(sizeof(fc_port_t), flags);
+ if (!fcport)
+ return NULL;
/* Setup fcport template structure. */
- memset(fcport, 0, sizeof (fc_port_t));
fcport->ha = ha;
+ fcport->vp_idx = ha->vp_idx;
fcport->port_type = FCT_UNKNOWN;
fcport->loop_id = FC_NO_LOOP_ID;
- fcport->iodesc_idx_sent = IODESC_INVALID_INDEX;
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
fcport->supported_classes = FC_COS_UNSPECIFIED;
- INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport);
- INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport);
+ spin_lock_init(&fcport->rport_lock);
- return (fcport);
+ return fcport;
}
/*
set_bit(RSCN_UPDATE, &flags);
clear_bit(LOCAL_LOOP_UPDATE, &flags);
+ } else if (ha->current_topology == ISP_CFG_N) {
+ clear_bit(RSCN_UPDATE, &flags);
+
} else if (!ha->flags.online ||
(test_bit(ABORT_ISP_ACTIVE, &flags))) {
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
- if (LOOP_NOT_READY(ha)) {
+ if (LOOP_TRANSITION(ha)) {
rval = QLA_FUNCTION_FAILED;
} else {
rval = qla2x00_configure_fabric(ha);
char *id_iter;
uint16_t loop_id;
uint8_t domain, area, al_pa;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
found_devs = 0;
new_fcport = NULL;
/*
* Mark local devices that were present with FCF_DEVICE_LOST for now.
*/
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (fcport->vp_idx != ha->vp_idx)
+ continue;
+
if (atomic_read(&fcport->state) == FCS_ONLINE &&
fcport->port_type != FCT_BROADCAST &&
(fcport->flags & FCF_FABRIC_DEVICE) == 0) {
new_fcport->d_id.b.area = area;
new_fcport->d_id.b.al_pa = al_pa;
new_fcport->loop_id = loop_id;
+ new_fcport->vp_idx = ha->vp_idx;
rval2 = qla2x00_get_port_database(ha, new_fcport, 0);
if (rval2 != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): Failed to retrieve fcport "
"information -- get_port_database=%x, "
"loop_id=0x%04x\n",
ha->host_no, rval2, new_fcport->loop_id));
+ DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
+ ha->host_no));
+ set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
continue;
}
/* Check for matching device in port list. */
found = 0;
fcport = NULL;
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (fcport->vp_idx != ha->vp_idx)
+ continue;
+
if (memcmp(new_fcport->port_name, fcport->port_name,
WWN_SIZE))
continue;
if (!found) {
/* New device, add to fcports list. */
new_fcport->flags &= ~FCF_PERSISTENT_BOUND;
- list_add_tail(&new_fcport->list, &ha->fcports);
+ if (ha->parent) {
+ new_fcport->ha = ha;
+ new_fcport->vp_idx = ha->vp_idx;
+ list_add_tail(&new_fcport->vp_fcport,
+ &ha->vp_fcports);
+ }
+ list_add_tail(&new_fcport->list, &pha->fcports);
/* Allocate a new replacement fcport. */
fcport = new_fcport;
new_fcport->flags &= ~FCF_FABRIC_DEVICE;
}
+ /* Base iIDMA settings on HBA port speed. */
+ fcport->fp_speed = ha->link_data_rate;
+
qla2x00_update_fcport(ha, fcport);
found_devs++;
}
static void
-qla2x00_probe_for_all_luns(scsi_qla_host_t *ha)
+qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
{
- fc_port_t *fcport;
-
- qla2x00_mark_all_devices_lost(ha);
- list_for_each_entry(fcport, &ha->fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- qla2x00_update_fcport(ha, fcport);
- }
-}
+#define LS_UNKNOWN 2
+ static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+ int rval;
+ uint16_t mb[6];
-/*
- * qla2x00_update_fcport
- * Updates device on list.
- *
- * Input:
- * ha = adapter block pointer.
- * fcport = port structure pointer.
- *
- * Return:
- * 0 - Success
- * BIT_0 - error
- *
- * Context:
- * Kernel context.
- */
-static void
-qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
-{
- uint16_t index;
- unsigned long flags;
- srb_t *sp;
+ if (!IS_IIDMA_CAPABLE(ha))
+ return;
- fcport->ha = ha;
- fcport->login_retry = 0;
- fcport->port_login_retry_count = ha->port_down_retry_count *
- PORT_RETRY_TIME;
- atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
- PORT_RETRY_TIME);
- fcport->flags &= ~FCF_LOGIN_NEEDED;
+ if (fcport->fp_speed == PORT_SPEED_UNKNOWN ||
+ fcport->fp_speed > ha->link_data_rate)
+ return;
- /*
- * Check for outstanding cmd on tape Bypass LUN discovery if active
- * command on tape.
- */
- if (fcport->flags & FCF_TAPE_PRESENT) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
- fc_port_t *sfcp;
-
- if ((sp = ha->outstanding_cmds[index]) != 0) {
- sfcp = sp->fcport;
- if (sfcp == fcport) {
- atomic_set(&fcport->state, FCS_ONLINE);
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ rval = qla2x00_set_idma_speed(ha, fcport->loop_id, fcport->fp_speed,
+ mb);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA "
+ "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n",
+ ha->host_no, fcport->port_name[0], fcport->port_name[1],
+ fcport->port_name[2], fcport->port_name[3],
+ fcport->port_name[4], fcport->port_name[5],
+ fcport->port_name[6], fcport->port_name[7], rval,
+ fcport->fp_speed, mb[0], mb[1]));
+ } else {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "iIDMA adjusted to %s GB/s on "
+ "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
+ link_speeds[fcport->fp_speed], fcport->port_name[0],
+ fcport->port_name[1], fcport->port_name[2],
+ fcport->port_name[3], fcport->port_name[4],
+ fcport->port_name[5], fcport->port_name[6],
+ fcport->port_name[7]));
}
-
- if (fcport->port_type == FCT_INITIATOR ||
- fcport->port_type == FCT_BROADCAST)
- fcport->device_type = TYPE_PROCESSOR;
-
- atomic_set(&fcport->state, FCS_ONLINE);
-
- if (ha->flags.init_done)
- qla2x00_reg_remote_port(ha, fcport);
}
-void
+static void
qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport) {
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
- }
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+ if (fcport->rport)
+ return;
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+ rport = fc_remote_port_add(ha->host, 0, &rport_ids);
if (!rport) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate fc remote port!\n");
return;
}
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = rport;
*((fc_port_t **)rport->dd_data) = fcport;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+
rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (fcport->port_type == FCT_TARGET)
rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
fc_remote_port_rolechg(rport, rport_ids.roles);
+}
- if (rport->scsi_target_id != -1 &&
- rport->scsi_target_id < ha->host->max_id)
- fcport->os_target_id = rport->scsi_target_id;
+/*
+ * qla2x00_update_fcport
+ * Updates device on list.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * fcport = port structure pointer.
+ *
+ * Return:
+ * 0 - Success
+ * BIT_0 - error
+ *
+ * Context:
+ * Kernel context.
+ */
+void
+qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+ scsi_qla_host_t *pha = to_qla_parent(ha);
+
+ fcport->ha = ha;
+ fcport->login_retry = 0;
+ fcport->port_login_retry_count = pha->port_down_retry_count *
+ PORT_RETRY_TIME;
+ atomic_set(&fcport->port_down_timer, pha->port_down_retry_count *
+ PORT_RETRY_TIME);
+ fcport->flags &= ~FCF_LOGIN_NEEDED;
+
+ qla2x00_iidma_fcport(ha, fcport);
+
+ atomic_set(&fcport->state, FCS_ONLINE);
+
+ qla2x00_reg_remote_port(ha, fcport);
}
/*
uint16_t mb[MAILBOX_REGISTER_COUNT];
uint16_t loop_id;
LIST_HEAD(new_fcports);
+ scsi_qla_host_t *pha = to_qla_parent(ha);
/* If FL port exists, then SNS is present */
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ if (IS_FWI2_CAPABLE(ha))
loop_id = NPH_F_PORT;
else
loop_id = SNS_FL_PORT;
- rval = qla2x00_get_port_name(ha, loop_id, NULL, 0);
+ rval = qla2x00_get_port_name(ha, loop_id, ha->fabric_node_name, 1);
if (rval != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
"Port\n", ha->host_no));
ha->device_flags &= ~SWITCH_FOUND;
return (QLA_SUCCESS);
}
+ ha->device_flags |= SWITCH_FOUND;
/* Mark devices that need re-synchronization. */
rval2 = qla2x00_device_resync(ha);
qla2x00_fdmi_register(ha);
/* Ensure we are logged into the SNS. */
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ if (IS_FWI2_CAPABLE(ha))
loop_id = NPH_SNS;
else
loop_id = SIMPLE_NAME_SERVER;
- ha->isp_ops.fabric_login(ha, loop_id, 0xff, 0xff,
+ ha->isp_ops->fabric_login(ha, loop_id, 0xff, 0xff,
0xfc, mb, BIT_1 | BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
DEBUG2(qla_printk(KERN_INFO, ha,
* Logout all previous fabric devices marked lost, except
* tape devices.
*/
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (fcport->vp_idx !=ha->vp_idx)
+ continue;
+
if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
break;
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
qla2x00_mark_device_lost(ha, fcport,
- ql2xplogiabsentdevice);
+ ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
-
- ha->isp_ops.fabric_logout(ha,
+ ha->isp_ops->fabric_logout(ha,
fcport->loop_id,
fcport->d_id.b.domain,
fcport->d_id.b.area,
}
/* Starting free loop ID. */
- next_loopid = ha->min_external_loopid;
+ next_loopid = pha->min_external_loopid;
/*
* Scan through our port list and login entries that need to be
* logged in.
*/
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (fcport->vp_idx != ha->vp_idx)
+ continue;
+
if (atomic_read(&ha->loop_down_timer) ||
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
break;
if (fcport->loop_id == FC_NO_LOOP_ID) {
fcport->loop_id = next_loopid;
- rval = qla2x00_find_new_loop_id(ha, fcport);
+ rval = qla2x00_find_new_loop_id(
+ to_qla_parent(ha), fcport);
if (rval != QLA_SUCCESS) {
/* Ran out of IDs to use */
break;
/* Find a new loop ID to use. */
fcport->loop_id = next_loopid;
- rval = qla2x00_find_new_loop_id(ha, fcport);
+ rval = qla2x00_find_new_loop_id(to_qla_parent(ha),
+ fcport);
if (rval != QLA_SUCCESS) {
/* Ran out of IDs to use */
break;
}
- /* Remove device from the new list and add it to DB */
- list_del(&fcport->list);
- list_add_tail(&fcport->list, &ha->fcports);
-
/* Login and update database */
qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
+
+ if (ha->parent) {
+ fcport->ha = ha;
+ fcport->vp_idx = ha->vp_idx;
+ list_add_tail(&fcport->vp_fcport,
+ &ha->vp_fcports);
+ list_move_tail(&fcport->list,
+ &ha->parent->fcports);
+ } else
+ list_move_tail(&fcport->list, &ha->fcports);
}
} while (0);
int swl_idx;
int first_dev, last_dev;
port_id_t wrap, nxt_d_id;
+ int vp_index;
+ int empty_vp_index;
+ int found_vp;
+ scsi_qla_host_t *vha;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
rval = QLA_SUCCESS;
/* Try GID_PT to get device list, else GAN. */
- swl = kmalloc(sizeof(sw_info_t) * MAX_FIBRE_DEVICES, GFP_ATOMIC);
- if (swl == NULL) {
+ swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_ATOMIC);
+ if (!swl) {
/*EMPTY*/
DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback "
"on GA_NXT\n", ha->host_no));
} else {
- memset(swl, 0, sizeof(sw_info_t) * MAX_FIBRE_DEVICES);
if (qla2x00_gid_pt(ha, swl) != QLA_SUCCESS) {
kfree(swl);
swl = NULL;
} else if (qla2x00_gnn_id(ha, swl) != QLA_SUCCESS) {
kfree(swl);
swl = NULL;
+ } else if (qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
+ qla2x00_gpsc(ha, swl);
}
}
swl_idx = 0;
return (QLA_MEMORY_ALLOC_FAILED);
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
-
+ new_fcport->vp_idx = ha->vp_idx;
/* Set start port ID scan at adapter ID. */
first_dev = 1;
last_dev = 0;
/* Starting free loop ID. */
- loop_id = ha->min_external_loopid;
+ loop_id = pha->min_external_loopid;
for (; loop_id <= ha->last_loop_id; loop_id++) {
if (qla2x00_is_reserved_id(ha, loop_id))
continue;
- if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha))
+ if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
break;
if (swl != NULL) {
swl[swl_idx].node_name, WWN_SIZE);
memcpy(new_fcport->port_name,
swl[swl_idx].port_name, WWN_SIZE);
+ memcpy(new_fcport->fabric_port_name,
+ swl[swl_idx].fabric_port_name, WWN_SIZE);
+ new_fcport->fp_speed = swl[swl_idx].fp_speed;
if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
last_dev = 1;
break;
}
- /* Bypass if host adapter. */
- if (new_fcport->d_id.b24 == ha->d_id.b24)
+ /* Bypass if same physical adapter. */
+ if (new_fcport->d_id.b24 == pha->d_id.b24)
continue;
+ /* Bypass virtual ports of the same host. */
+ if (pha->num_vhosts) {
+ for_each_mapped_vp_idx(pha, vp_index) {
+ empty_vp_index = 1;
+ found_vp = 0;
+ list_for_each_entry(vha, &pha->vp_list,
+ vp_list) {
+ if (vp_index == vha->vp_idx) {
+ empty_vp_index = 0;
+ found_vp = 1;
+ break;
+ }
+ }
+
+ if (empty_vp_index)
+ continue;
+
+ if (found_vp &&
+ new_fcport->d_id.b24 == vha->d_id.b24)
+ break;
+ }
+
+ if (vp_index <= pha->max_npiv_vports)
+ continue;
+ }
+
/* Bypass if same domain and area of adapter. */
if (((new_fcport->d_id.b24 & 0xffff00) ==
(ha->d_id.b24 & 0xffff00)) && ha->current_topology ==
/* Locate matching device in database. */
found = 0;
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (new_fcport->vp_idx != fcport->vp_idx)
+ continue;
if (memcmp(new_fcport->port_name, fcport->port_name,
WWN_SIZE))
continue;
found++;
+ /* Update port state. */
+ memcpy(fcport->fabric_port_name,
+ new_fcport->fabric_port_name, WWN_SIZE);
+ fcport->fp_speed = new_fcport->fp_speed;
+
/*
* If address the same and state FCS_ONLINE, nothing
* changed.
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
- ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ ha->isp_ops->fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
new_fcport->d_id.b24 = nxt_d_id.b24;
+ new_fcport->vp_idx = ha->vp_idx;
}
kfree(swl);
* Context:
* Kernel context.
*/
-int
+static int
qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev)
{
int rval;
int found;
fc_port_t *fcport;
uint16_t first_loop_id;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
rval = QLA_SUCCESS;
/* Check for loop ID being already in use. */
found = 0;
fcport = NULL;
- list_for_each_entry(fcport, &ha->fcports, list) {
+ list_for_each_entry(fcport, &pha->fcports, list) {
if (fcport->loop_id == dev->loop_id && fcport != dev) {
/* ID possibly in use */
found++;
qla2x00_device_resync(scsi_qla_host_t *ha)
{
int rval;
- int rval2;
uint32_t mask;
fc_port_t *fcport;
uint32_t rscn_entry;
uint8_t rscn_out_iter;
uint8_t format;
port_id_t d_id;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
rval = QLA_RSCNS_HANDLED;
switch (format) {
case 0:
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
- !IS_QLA6312(ha) && !IS_QLA6322(ha) &&
- !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
- ha->flags.init_done) {
- /* Handle port RSCN via asyncronous IOCBs */
- rval2 = qla2x00_handle_port_rscn(ha, rscn_entry,
- NULL, 0);
- if (rval2 == QLA_SUCCESS)
- continue;
- }
mask = 0xffffff;
break;
case 1:
rval = QLA_SUCCESS;
- /* Abort any outstanding IO descriptors. */
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
- qla2x00_cancel_io_descriptors(ha);
+ list_for_each_entry(fcport, &pha->fcports, list) {
+ if (fcport->vp_idx != ha->vp_idx)
+ continue;
- list_for_each_entry(fcport, &ha->fcports, list) {
if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
(fcport->d_id.b24 & mask) != d_id.b24 ||
fcport->port_type == FCT_BROADCAST)
if (atomic_read(&fcport->state) == FCS_ONLINE) {
if (format != 3 ||
fcport->port_type != FCT_INITIATOR) {
- qla2x00_mark_device_lost(ha, fcport, 0);
+ qla2x00_mark_device_lost(ha, fcport,
+ 0, 0);
}
}
fcport->flags &= ~FCF_FARP_DONE;
opts |= BIT_1;
rval = qla2x00_get_port_database(ha, fcport, opts);
if (rval != QLA_SUCCESS) {
- ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ ha->isp_ops->fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
-
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
} else {
qla2x00_update_fcport(ha, fcport);
}
fcport->d_id.b.area, fcport->d_id.b.al_pa));
/* Login fcport on switch. */
- ha->isp_ops.fabric_login(ha, fcport->loop_id,
+ ha->isp_ops->fabric_login(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa, mb, BIT_0);
if (mb[0] == MBS_PORT_ID_USED) {
* dead.
*/
*next_loopid = fcport->loop_id;
- ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ ha->isp_ops->fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
rval = 1;
break;
fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
*next_loopid = fcport->loop_id;
- ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ ha->isp_ops->fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
* 3 - Fatal error
*/
int
-qla2x00_local_device_login(scsi_qla_host_t *ha, uint16_t loop_id)
+qla2x00_local_device_login(scsi_qla_host_t *ha, fc_port_t *fcport)
{
int rval;
uint16_t mb[MAILBOX_REGISTER_COUNT];
memset(mb, 0, sizeof(mb));
- rval = qla2x00_login_local_device(ha, loop_id, mb, BIT_0);
+ rval = qla2x00_login_local_device(ha, fcport, mb, BIT_0);
if (rval == QLA_SUCCESS) {
/* Interrogate mailbox registers for any errors */
if (mb[0] == MBS_COMMAND_ERROR)
}
void
-qla2x00_rescan_fcports(scsi_qla_host_t *ha)
+qla2x00_update_fcports(scsi_qla_host_t *ha)
{
- int rescan_done;
fc_port_t *fcport;
- rescan_done = 0;
- list_for_each_entry(fcport, &ha->fcports, list) {
- if ((fcport->flags & FCF_RESCAN_NEEDED) == 0)
- continue;
-
- qla2x00_update_fcport(ha, fcport);
- fcport->flags &= ~FCF_RESCAN_NEEDED;
-
- rescan_done = 1;
- }
- qla2x00_probe_for_all_luns(ha);
+ /* Go with deferred removal of rport references. */
+ list_for_each_entry(fcport, &ha->fcports, list)
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
}
/*
int
qla2x00_abort_isp(scsi_qla_host_t *ha)
{
- unsigned long flags = 0;
- uint16_t cnt;
- srb_t *sp;
+ int rval;
uint8_t status = 0;
if (ha->flags.online) {
qla_printk(KERN_INFO, ha,
"Performing ISP error recovery - ha= %p.\n", ha);
- ha->isp_ops.reset_chip(ha);
+ ha->isp_ops->reset_chip(ha);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
}
- spin_lock_irqsave(&ha->hardware_lock, flags);
/* Requeue all commands in outstanding command list. */
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- sp = ha->outstanding_cmds[cnt];
- if (sp) {
- ha->outstanding_cmds[cnt] = NULL;
- sp->flags = 0;
- sp->cmd->result = DID_RESET << 16;
- sp->cmd->host_scribble = (unsigned char *)NULL;
- qla2x00_sp_compl(ha, sp);
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ qla2x00_abort_all_cmds(ha, DID_RESET << 16);
- ha->isp_ops.nvram_config(ha);
+ ha->isp_ops->get_flash_version(ha, ha->request_ring);
+
+ ha->isp_ops->nvram_config(ha);
if (!qla2x00_restart_isp(ha)) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
ha->flags.online = 1;
- ha->isp_ops.enable_intrs(ha);
+ ha->isp_ops->enable_intrs(ha);
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
+
+ if (ha->eft) {
+ memset(ha->eft, 0, EFT_SIZE);
+ rval = qla2x00_enable_eft_trace(ha,
+ ha->eft_dma, EFT_NUM_BUFFERS);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to reinitialize EFT "
+ "(%d).\n", rval);
+ }
+ }
+
+ if (ha->fce) {
+ ha->flags.fce_enabled = 1;
+ memset(ha->fce, 0,
+ fce_calc_size(ha->fce_bufs));
+ rval = qla2x00_enable_fce_trace(ha,
+ ha->fce_dma, ha->fce_bufs, ha->fce_mb,
+ &ha->fce_bufs);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to reinitialize FCE "
+ "(%d).\n", rval);
+ ha->flags.fce_enabled = 0;
+ }
+ }
} else { /* failed the ISP abort */
ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
* The next call disables the board
* completely.
*/
- ha->isp_ops.reset_adapter(ha);
+ ha->isp_ops->reset_adapter(ha);
ha->flags.online = 0;
clear_bit(ISP_ABORT_RETRY,
&ha->dpc_flags);
ha->isp_abort_cnt--;
DEBUG(printk("qla%ld: ISP abort - "
"retry remaining %d\n",
- ha->host_no, ha->isp_abort_cnt);)
+ ha->host_no, ha->isp_abort_cnt));
status = 1;
}
} else {
ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
DEBUG(printk("qla2x00(%ld): ISP error recovery "
"- retrying (%d) more times\n",
- ha->host_no, ha->isp_abort_cnt);)
+ ha->host_no, ha->isp_abort_cnt));
set_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
status = 1;
}
} else {
DEBUG(printk(KERN_INFO
"qla2x00_abort_isp(%ld): exiting.\n",
- ha->host_no);)
+ ha->host_no));
}
return(status);
qla2x00_restart_isp(scsi_qla_host_t *ha)
{
uint8_t status = 0;
- struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- unsigned long flags = 0;
uint32_t wait_time;
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(ha)) {
ha->flags.online = 0;
- if (!(status = ha->isp_ops.chip_diag(ha))) {
- if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
- status = qla2x00_setup_chip(ha);
- goto done;
- }
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
-
- if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
- /*
- * Disable SRAM, Instruction RAM and GP RAM
- * parity.
- */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x0));
- RD_REG_WORD(®->hccr);
- }
-
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
+ if (!(status = ha->isp_ops->chip_diag(ha)))
status = qla2x00_setup_chip(ha);
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
-
- if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
- /* Enable proper parity */
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x1));
- else
- /*
- * SRAM, Instruction RAM and GP RAM
- * parity.
- */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x7));
- RD_REG_WORD(®->hccr);
- }
-
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
}
- done:
if (!status && !(status = qla2x00_init_rings(ha))) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
if (!(status = qla2x00_fw_ready(ha))) {
DEBUG(printk("%s(): Start configure loop, "
- "status = %d\n", __func__, status);)
+ "status = %d\n", __func__, status));
/* Issue a marker after FW becomes ready. */
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
__func__,
- status);)
+ status));
}
return (status);
}
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ha->flags.online = 0;
- ha->isp_ops.disable_intrs(ha);
+ ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
ha->flags.online = 0;
- ha->isp_ops.disable_intrs(ha);
+ ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+ const u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
int
qla24xx_nvram_config(scsi_qla_host_t *ha)
{
rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
- nv = (struct nvram_24xx *)ha->request_ring;
+ nv = ha->nvram;
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(struct nvram_24xx);
ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
- if (PCI_FUNC(ha->pdev->devfn))
+ ha->vpd_size = FA_NVRAM_VPD_SIZE;
+ ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn)) {
ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+ ha->vpd_base = FA_NVRAM_VPD1_ADDR;
+ }
- /* Get NVRAM data and calculate checksum. */
+ /* Get VPD data into cache */
+ ha->vpd = ha->nvram + VPD_OFFSET;
+ ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd,
+ ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
+
+ /* Get NVRAM data into cache and calculate checksum. */
dptr = (uint32_t *)nv;
- ha->isp_ops.read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
+ ha->isp_ops->read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
ha->nvram_size);
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
chksum += le32_to_cpu(*dptr++);
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- ha->nvram_size));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
nv->node_name[5] = 0x1c;
nv->node_name[6] = 0x55;
nv->node_name[7] = 0x86;
+ qla24xx_nvram_wwn_from_ofw(ha, nv);
nv->login_retry_count = __constant_cpu_to_le16(8);
- nv->link_down_timeout = __constant_cpu_to_le16(200);
nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
nv->login_timeout = __constant_cpu_to_le16(0);
nv->firmware_options_1 =
*dptr1++ = *dptr2++;
icb->login_retry_count = nv->login_retry_count;
- icb->link_down_timeout = nv->link_down_timeout;
+ icb->link_down_on_nos = nv->link_down_on_nos;
/* Copy 2nd segment. */
dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
/*
* Setup driver NVRAM options.
*/
- if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) {
- char *st, *en;
- uint16_t index;
-
- strncpy(ha->model_number, nv->model_name,
- sizeof(nv->model_name));
- st = en = ha->model_number;
- en += sizeof(nv->model_name) - 1;
- while (en > st) {
- if (*en != 0x20 && *en != 0x00)
- break;
- *en-- = '\0';
- }
+ qla2x00_set_model_info(ha, nv->model_name, sizeof(nv->model_name),
+ "QLA2462");
- index = (ha->pdev->subsystem_device & 0xff);
- if (index < QLA_MODEL_NAMES)
- ha->model_desc = qla2x00_model_desc[index];
- } else
- strcpy(ha->model_number, "QLA2462");
+ /* Use alternate WWN? */
+ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+ memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
+ memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
+ }
/* Prepare nodename */
- if ((icb->firmware_options_1 & BIT_14) == 0) {
+ if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
/*
* Firmware will apply the following mask if the nodename was
* not provided.
/* Set host adapter parameters. */
ha->flags.disable_risc_code_load = 0;
- ha->flags.enable_lip_reset = 1;
- ha->flags.enable_lip_full_login = 1;
- ha->flags.enable_target_reset = 1;
+ ha->flags.enable_lip_reset = 0;
+ ha->flags.enable_lip_full_login =
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ ha->flags.enable_target_reset =
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
ha->flags.enable_led_scheme = 0;
+ ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
- ha->operating_mode =
- (icb->firmware_options_2 & (BIT_6 | BIT_5 | BIT_4)) >> 4;
+ ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
+ (BIT_6 | BIT_5 | BIT_4)) >> 4;
memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
sizeof(ha->fw_seriallink_options24));
ha->node_name = icb->node_name;
ha->port_name = icb->port_name;
+ icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
ha->retry_count = le16_to_cpu(nv->login_retry_count);
/* Set minimum login_timeout to 4 seconds. */
if (le16_to_cpu(nv->login_timeout) < 4)
nv->login_timeout = __constant_cpu_to_le16(4);
ha->login_timeout = le16_to_cpu(nv->login_timeout);
- icb->login_timeout = cpu_to_le16(nv->login_timeout);
+ icb->login_timeout = nv->login_timeout;
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
ha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
"(%d us).\n", ha->host_no, ha->zio_mode,
ha->zio_timer * 100));
return (rval);
}
-int
-qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
-{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
- struct qla_fw_info *fw_iter;
-
- rval = QLA_SUCCESS;
-
- /* Load firmware sequences */
- fw_iter = ha->brd_info->fw_info;
- *srisc_addr = *ha->brd_info->fw_info->fwstart;
- while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
- risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
-
- num = 0;
- rval = 0;
- while (risc_code_size > 0 && !rval) {
- cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
-
- DEBUG7(printk("scsi(%ld): Loading risc segment@ "
- "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
-
- req_ring = (uint16_t *)ha->request_ring;
- for (i = 0; i < cnt; i++)
- req_ring[i] = cpu_to_le16(risc_code[i]);
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha, ha->request_dma,
- risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
- if (rval) {
- DEBUG(printk("scsi(%ld): [ERROR] Failed to "
- "load segment %d of firmware\n",
- ha->host_no, num));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load segment %d of "
- "firmware\n", num);
-
- qla2x00_dump_regs(ha);
- break;
- }
-
- risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
- num++;
- }
-
- /* Next firmware sequence */
- fw_iter++;
- }
-
- return (rval);
-}
-
-int
+static int
qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
for (i = 0; i < dlen; i++)
dcode[i] = swab32(dcode[i]);
- rval = qla2x00_load_ram_ext(ha, ha->request_dma,
- risc_addr, dlen);
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
if (rval) {
DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
"segment %d of firmware\n", ha->host_no,
return rval;
}
+#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"
+
int
-qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int i, fragment;
+ uint16_t *wcode, *fwcode;
+ uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
+ struct fw_blob *blob;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
+ "from: " QLA_FW_URL ".\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ wcode = (uint16_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint16_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint16_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ wcode[i] = be16_to_cpu(fwcode[i + 4]);
+ if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
+ wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
+ wcode[2] == 0 && wcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
+ wcode[1], wcode[2], wcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ seg = blob->segs;
+ while (*seg && rval == QLA_SUCCESS) {
+ risc_addr = *seg;
+ *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
+ risc_size = be16_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint16_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ wlen = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (wlen > risc_size)
+ wlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of words 0x%x.\n", ha->host_no,
+ risc_addr, wlen));
+
+ for (i = 0; i < wlen; i++)
+ wcode[i] = swab16(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ wlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += wlen;
+ risc_addr += wlen;
+ risc_size -= wlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ seg++;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
- const struct firmware *fw_entry;
+ struct fw_blob *blob;
uint32_t *fwcode, fwclen;
- if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
- &ha->pdev->dev)) {
- qla_printk(KERN_ERR, ha,
- "Firmware image file not available: '%s'\n",
- ha->brd_info->fw_fname);
- return QLA_FUNCTION_FAILED;
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
+ "from: " QLA_FW_URL ".\n");
+
+ /* Try to load RISC code from flash. */
+ qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
+ "outdated) firmware from flash.\n");
+ return qla24xx_load_risc_flash(ha, srisc_addr);
}
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)ha->request_ring;
*srisc_addr = 0;
- fwcode = (uint32_t *)fw_entry->data;
+ fwcode = (uint32_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
- if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ if (blob->fw->size < 8 * sizeof(uint32_t)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image "
- "(%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
goto fail_fw_integrity;
}
for (i = 0; i < 4; i++)
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image!\n");
+ "Unable to verify integrity of firmware image!\n");
qla_printk(KERN_WARNING, ha,
"Firmware data: %08x %08x %08x %08x!\n", dcode[0],
dcode[1], dcode[2], dcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
- if (fw_entry->size < fwclen) {
+ if (blob->fw->size < fwclen) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware "
- "image (%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+
goto fail_fw_integrity;
}
for (i = 0; i < dlen; i++)
dcode[i] = swab32(fwcode[i]);
- rval = qla2x00_load_ram_ext(ha, ha->request_dma,
- risc_addr, dlen);
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
if (rval) {
DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
"segment %d of firmware\n", ha->host_no,
/* Next segment. */
segments--;
}
-
- release_firmware(fw_entry);
return rval;
fail_fw_integrity:
-
- release_firmware(fw_entry);
return QLA_FUNCTION_FAILED;
+}
+
+void
+qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
+{
+ int ret, retries;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return;
+ if (!ha->fw_major_version)
+ return;
+
+ ret = qla2x00_stop_firmware(ha);
+ for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
+ retries ; retries--) {
+ qla2x00_reset_chip(ha);
+ if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
+ continue;
+ if (qla2x00_setup_chip(ha) != QLA_SUCCESS)
+ continue;
+ qla_printk(KERN_INFO, ha,
+ "Attempting retry of stop-firmware command...\n");
+ ret = qla2x00_stop_firmware(ha);
+ }
+}
+
+int
+qla24xx_configure_vhba(scsi_qla_host_t *ha)
+{
+ int rval = QLA_SUCCESS;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+
+ if (!ha->parent)
+ return -EINVAL;
+
+ rval = qla2x00_fw_ready(ha->parent);
+ if (rval == QLA_SUCCESS) {
+ clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
+ qla2x00_marker(ha->parent, 0, 0, MK_SYNC_ALL);
+ }
+
+ ha->flags.management_server_logged_in = 0;
+
+ /* Login to SNS first */
+ qla24xx_login_fabric(ha->parent, NPH_SNS, 0xff, 0xff, 0xfc,
+ mb, BIT_1);
+ if (mb[0] != MBS_COMMAND_COMPLETE) {
+ DEBUG15(qla_printk(KERN_INFO, ha,
+ "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
+ "mb[2]=%x mb[6]=%x mb[7]=%x\n", NPH_SNS,
+ mb[0], mb[1], mb[2], mb[6], mb[7]));
+ return (QLA_FUNCTION_FAILED);
+ }
+
+ atomic_set(&ha->loop_down_timer, 0);
+ atomic_set(&ha->loop_state, LOOP_UP);
+ set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
+ set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
+ rval = qla2x00_loop_resync(ha->parent);
+
+ return rval;
+}
+
+/* 84XX Support **************************************************************/
+
+static LIST_HEAD(qla_cs84xx_list);
+static DEFINE_MUTEX(qla_cs84xx_mutex);
+
+static struct qla_chip_state_84xx *
+qla84xx_get_chip(struct scsi_qla_host *ha)
+{
+ struct qla_chip_state_84xx *cs84xx;
+
+ mutex_lock(&qla_cs84xx_mutex);
+
+ /* Find any shared 84xx chip. */
+ list_for_each_entry(cs84xx, &qla_cs84xx_list, list) {
+ if (cs84xx->bus == ha->pdev->bus) {
+ kref_get(&cs84xx->kref);
+ goto done;
+ }
+ }
+
+ cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL);
+ if (!cs84xx)
+ goto done;
+
+ kref_init(&cs84xx->kref);
+ spin_lock_init(&cs84xx->access_lock);
+ mutex_init(&cs84xx->fw_update_mutex);
+ cs84xx->bus = ha->pdev->bus;
+
+ list_add_tail(&cs84xx->list, &qla_cs84xx_list);
+done:
+ mutex_unlock(&qla_cs84xx_mutex);
+ return cs84xx;
+}
+
+static void
+__qla84xx_chip_release(struct kref *kref)
+{
+ struct qla_chip_state_84xx *cs84xx =
+ container_of(kref, struct qla_chip_state_84xx, kref);
+
+ mutex_lock(&qla_cs84xx_mutex);
+ list_del(&cs84xx->list);
+ mutex_unlock(&qla_cs84xx_mutex);
+ kfree(cs84xx);
+}
+
+void
+qla84xx_put_chip(struct scsi_qla_host *ha)
+{
+ if (ha->cs84xx)
+ kref_put(&ha->cs84xx->kref, __qla84xx_chip_release);
+}
+
+static int
+qla84xx_init_chip(scsi_qla_host_t *ha)
+{
+ int rval;
+ uint16_t status[2];
+
+ mutex_lock(&ha->cs84xx->fw_update_mutex);
+
+ rval = qla84xx_verify_chip(ha, status);
+
+ mutex_unlock(&ha->cs84xx->fw_update_mutex);
+ return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
+ QLA_SUCCESS;
}