If unsure, say no.
-config REGULATOR_BQ24022
- tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+config REGULATOR_GPIO
+ tristate "GPIO regulator support"
+ depends on GENERIC_GPIO
help
- This driver controls a TI bq24022 Charger attached via
- GPIOs. The provided current regulator can enable/disable
- charging select between 100 mA and 500 mA charging current
- limit.
+ This driver provides support for regulators that can be
+ controlled via gpios.
+ It is capable of supporting current and voltage regulators
+ and the platform has to provide a mapping of GPIO-states
+ to target volts/amps.
+
+config REGULATOR_AD5398
+ tristate "Analog Devices AD5398/AD5821 regulators"
+ depends on I2C
+ help
+ This driver supports AD5398 and AD5821 current regulator chips.
+ If building into module, its name is ad5398.ko.
+
+config REGULATOR_AAT2870
+ tristate "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
+config REGULATOR_DA903X
+ tristate "Dialog Semiconductor DA9030/DA9034 regulators"
+ depends on PMIC_DA903X
+ help
+ Say y here to support the BUCKs and LDOs regulators found on
+ Dialog Semiconductor DA9030/DA9034 PMIC.
+
+config REGULATOR_DA9052
+ tristate "Dialog Semiconductor DA9052/DA9053 regulators"
+ depends on PMIC_DA9052
+ help
+ This driver supports the voltage regulators of DA9052-BC and
+ DA9053-AA/Bx PMIC.
+
+config REGULATOR_ANATOP
+ tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+ depends on MFD_ANATOP
+ help
+ Say y here to support Freescale i.MX on-chip ANATOP LDOs
+ regulators. It is recommended that this option be
+ enabled on i.MX6 platform.
+
+config REGULATOR_MC13XXX_CORE
+ tristate
+
+config REGULATOR_MC13783
+ tristate "Freescale MC13783 regulator driver"
+ depends on MFD_MC13783
+ select REGULATOR_MC13XXX_CORE
+ help
+ Say y here to support the regulators found on the Freescale MC13783
+ PMIC.
+
+config REGULATOR_MC13892
+ tristate "Freescale MC13892 regulator driver"
+ depends on MFD_MC13XXX
+ select REGULATOR_MC13XXX_CORE
+ help
+ Say y here to support the regulators found on the Freescale MC13892
+ PMIC.
+
+config REGULATOR_ISL6271A
+ tristate "Intersil ISL6271A Power regulator"
+ depends on I2C
+ help
+ This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_88PM8607
+ bool "Marvell 88PM8607 Power regulators"
+ depends on MFD_88PM860X=y
+ help
+ This driver supports 88PM8607 voltage regulator chips.
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
config REGULATOR_MAX8649
tristate "Maxim 8649 voltage regulator"
depends on I2C
+ select REGMAP_I2C
help
This driver controls a Maxim 8649 voltage output regulator via
I2C bus.
This driver controls a Maxim 8660/8661 voltage output
regulator via I2C bus.
+config REGULATOR_MAX8925
+ tristate "Maxim MAX8925 Power Management IC"
+ depends on MFD_MAX8925
+ help
+ Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
+
+config REGULATOR_MAX8952
+ tristate "Maxim MAX8952 Power Management IC"
+ depends on I2C
+ help
+ This driver controls a Maxim 8952 voltage output regulator
+ via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
+ modes ranging from 0.77V to 1.40V by 0.01V steps.
+
+config REGULATOR_MAX8973
+ tristate "Maxim MAX8973 Power Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports MAX8973 voltage regulator chip.
+ The MAX8973 high-efficiency, three-phase, DC-DC step-down switching
+ regulator delivers up to 9A of output current.
+
+config REGULATOR_MAX8997
+ tristate "Maxim 8997/8966 regulator"
+ depends on MFD_MAX8997
+ help
+ This driver controls a Maxim 8997/8966 regulator
+ via I2C bus. The provided regulator is suitable for S5PC110,
+ S5PV210, and Exynos-4 chips to control VCC_CORE and
+ VCC_USIM voltages.
+
+config REGULATOR_MAX8998
+ tristate "Maxim 8998 voltage regulator"
+ depends on MFD_MAX8998
+ help
+ This driver controls a Maxim 8998 voltage output regulator
+ via I2C bus. The provided regulator is suitable for S3C6410
+ and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_MAX8907C
+ tristate "Maxim 8907C voltage regulator"
+ depends on MFD_MAX8907C
+ help
+ This driver controls a Maxim 8907C voltage output regulator
+ via I2C bus. The provided regulator is suitable for Tegra
+ chip to control Step-Down DC-DC and LDOs.
+
+config REGULATOR_MAX77663
+ tristate "Maxim 77663 voltage regulator"
+ depends on MFD_MAX77663
+ help
+ This driver controls a Maxim 77663 voltage output regulator
+ via I2C bus. The provided regulator is suitable for Tegra
+ chip to control Step-Down DC-DC and LDOs.
+
config REGULATOR_TWL4030
- bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
+ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
+config REGULATOR_DA9052
+ tristate "Dialog DA9052/DA9053 regulators"
+ depends on PMIC_DA9052
+ help
+ This driver supports the voltage regulators of DA9052-BC and
+ DA9053-AA/Bx PMIC.
+
config REGULATOR_PCF50633
tristate "PCF50633 regulator driver"
depends on MFD_PCF50633
help
- Say Y here to support the voltage regulators and convertors
- on PCF50633
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.
config REGULATOR_LP3971
tristate "National Semiconductors LP3971 PMIC regulator driver"
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC
-config REGULATOR_PCAP
- tristate "PCAP2 regulator driver"
- depends on EZX_PCAP
+config REGULATOR_LP3972
+ tristate "National Semiconductors LP3972 PMIC regulator driver"
+ depends on I2C
help
- This driver provides support for the voltage regulators of the
- PCAP2 PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3972 PMIC
-config REGULATOR_MC13783
- tristate "Support regulators on Freescale MC13783 PMIC"
- depends on MFD_MC13783
+config REGULATOR_PCF50633
+ tristate "NXP PCF50633 regulator driver"
+ depends on MFD_PCF50633
help
- Say y here to support the regulators found on the Freescale MC13783
- PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on PCF50633
+
+config REGULATOR_S5M8767
+ tristate "Samsung S5M8767A voltage regulator"
+ depends on MFD_S5M_CORE
+ help
+ This driver supports a Samsung S5M8767A voltage output regulator
+ via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
+ supports DVS mode with 8bits of output voltage control.
config REGULATOR_AB3100
tristate "ST-Ericsson AB3100 Regulator functions"
AB3100 analog baseband dealing with power regulators
for the system.
+config REGULATOR_AB8500
+ bool "ST-Ericsson AB8500 Power Regulators"
+ depends on AB8500_CORE
+ help
+ This driver supports the regulators found on the ST-Ericsson mixed
+ signal AB8500 PMIC
+
+config REGULATOR_DBX500_PRCMU
+ bool
+
+config REGULATOR_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+ depends on MFD_DB8500_PRCMU
+ select REGULATOR_DBX500_PRCMU
+ help
+ This driver supports the voltage domain regulators controlled by the
+ DB8500 PRCMU
+
+config REGULATOR_RC5T583
+ tristate "RICOH RC5T583 Power regulators"
+ depends on MFD_RC5T583
+ help
+ Select this option to enable the power regulator of RICOH
+ PMIC RC5T583.
+ This driver supports the control of different power rails of device
+ through regulator interface. The device supports multiple DCDC/LDO
+ outputs which can be controlled by i2c communication.
+
+config REGULATOR_PALMAS
+ tristate "TI Palmas PMIC Regulators"
+ depends on MFD_PALMAS
+ help
+ If you wish to control the regulators on the Palmas series of
+ chips say Y here. This will enable support for all the software
+ controllable SMPS/LDO regulators.
+
+ The regulators available on Palmas series chips vary depending
+ on the muxing. This is handled automatically in the driver by
+ reading the mux info from OTP.
+
+config REGULATOR_TPS6105X
+ tristate "TI TPS6105X Power regulators"
+ depends on TPS6105X
+ default y if TPS6105X
+ help
+ This driver supports TPS61050/TPS61052 voltage regulator chips.
+ It is a single boost converter primarily for white LEDs and
+ audio amplifiers.
+
+config REGULATOR_TPS62360
+ tristate "TI TPS62360 Power Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports TPS62360 voltage regulator chip. This
+ regulator is meant for processor core supply. This chip is
+ high-frequency synchronous step down dc-dc converter optimized
+ for battery-powered portable applications.
+
config REGULATOR_TPS65023
tristate "TI TPS65023 Power regulators"
depends on I2C
+ select REGMAP_I2C
help
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
three step-down converters and two general-purpose LDO voltage regulators.
three step-down converters and two general-purpose LDO voltage regulators.
It supports TI's software based Class-2 SmartReflex implementation.
-config REGULATOR_88PM8607
- bool "Marvell 88PM8607 Power regulators"
- depends on MFD_88PM8607=y
+config REGULATOR_TPS65217
+ tristate "TI TPS65217 Power regulators"
+ depends on MFD_TPS65217
help
- This driver supports 88PM8607 voltage regulator chips.
+ This driver supports TPS65217 voltage regulator chips. TPS65217
+ provides three step-down converters and four general-purpose LDO
+ voltage regulators. It supports software based voltage control
+ for different voltage domains
+
+config REGULATOR_TPS6524X
+ tristate "TI TPS6524X Power regulators"
+ depends on SPI
+ help
+ This driver supports TPS6524X voltage regulator chips. TPS6524X
+ provides three step-down converters and two general-purpose LDO
+ voltage regulators. This device is interfaced using a customized
+ serial interface currently supported on the sequencer serial
+ port controller.
+
+config REGULATOR_TPS6586X
+ tristate "TI TPS6586X Power regulators"
+ depends on MFD_TPS6586X
+ help
+ This driver supports TPS6586X voltage regulator chips.
+
+config REGULATOR_TPS65910
+ tristate "TI TPS65910/TPS65911 Power Regulators"
+ depends on MFD_TPS65910
+ help
+ This driver supports TPS65910/TPS65911 voltage regulator chips.
+
+config REGULATOR_TPS65912
+ tristate "TI TPS65912 Power regulator"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 voltage regulator chip.
+
+config REGULATOR_TWL4030
+ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
+ depends on TWL4030_CORE
+ help
+ This driver supports the voltage regulators provided by
+ this family of companion chips.
+
+config REGULATOR_WM831X
+ tristate "Wolfson Microelectronics WM831x PMIC regulators"
+ depends on MFD_WM831X
+ help
+ Support the voltage and current regulators of the WM831x series
+ of PMIC devices.
+
+config REGULATOR_TPS51632
+ tristate "TI TPS51632 Power Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports TPS51632 voltage regulator chip.
+ The TPS52632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
+ with Serial VID control and DVFS.
+
+config REGULATOR_TPS65090
+ tristate "TI TPS65090 Power regulator"
+ depends on MFD_TPS65090
+ help
+ This driver provides support for the voltage regulators on the
+ TI TPS65090 PMIC.
+
+config REGULATOR_WM8350
+ tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
+ depends on MFD_WM8350
+ help
+ This driver provides support for the voltage and current regulators
+ of the WM8350 AudioPlus PMIC.
+
+config REGULATOR_TPS65910
+ tristate "TI TPS65910/TPS65911 Power Regulators"
+ depends on MFD_TPS65910
+ help
+ This driver supports TPS65910/TPS65911 voltage regulator chips.
+
+config REGULATOR_TPS62360
+ tristate "TI TPS62360 Power Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports TPS62360 voltage regulator chip. This
+ regulator is meant for processor core supply. This chip is
+ high-frequency synchronous step down dc-dc converter optimized
+ for battery-powered portable applications.
+
+config REGULATOR_TPS6238X0
+ tristate "TI TPS623850/TPS623860/TPS623870 Power Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports TPS6238X0 voltage regulator chip. This
+ regulator is meant for processor core supply. This chip is
+ high-frequency synchronous step down dc-dc converter optimized
+ for battery-powered portable applications.
+
+config REGULATOR_WM8400
+ tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
+ depends on MFD_WM8400
+ help
+ This driver provides support for the voltage regulators of the
+ WM8400 AudioPlus PMIC.
+
+config REGULATOR_WM8994
+ tristate "Wolfson Microelectronics WM8994 CODEC"
+ depends on MFD_WM8994
+ help
+ This driver provides support for the voltage regulators on the
+ WM8994 CODEC.
+
+config REGULATOR_TPS6591X
+ tristate "TI TPS6591X Power regulators"
+ depends on MFD_TPS6591X
+ default n
+ help
+ This driver supports TPS6591X voltage regulator chips.
+
+config REGULATOR_TPS80031
+ tristate "TI TPS80031 Power regulators"
+ depends on MFD_TPS80031
+ default n
+ help
+ This driver supports TPS80031 voltage regulator chips.
+
+config REGULATOR_RICOH583
+ tristate "RICOH 583 Power regulators"
+ depends on MFD_RICOH583
+ default n
+ help
+ This driver supports regulator driver for RICOH583 PMIC.
+
+config REGULATOR_AAT2870
+ tristate "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
+config REGULATOR_FAN53555
+ tristate "Fairchild FAN53555 DC-DC CPU power supply regulators"
+ default n
+ help
+ This driver supports FAN53555 DC-DC CPU power supply.
endif
Code Review / linux-2.6.git / blobdiff