/* Get the noise samples. */
B43legacy_WARN_ON(dev->noisecalc.nr_samples >= 8);
i = dev->noisecalc.nr_samples;
- noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
}
static int b43legacy_op_tx(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_tx_control *ctl)
+ struct sk_buff *skb)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
/* DMA-TX is done without a global lock. */
if (b43legacy_using_pio(dev)) {
spin_lock_irqsave(&wl->irq_lock, flags);
- err = b43legacy_pio_tx(dev, skb, ctl);
+ err = b43legacy_pio_tx(dev, skb);
spin_unlock_irqrestore(&wl->irq_lock, flags);
} else
- err = b43legacy_dma_tx(dev, skb, ctl);
+ err = b43legacy_dma_tx(dev, skb);
out:
if (unlikely(err))
return NETDEV_TX_BUSY;
/* Start data flow (TX/RX) */
b43legacy_mac_enable(dev);
b43legacy_interrupt_enable(dev, dev->irq_savedstate);
- ieee80211_start_queues(dev->wl->hw);
/* Start maintenance work */
b43legacy_periodic_tasks_setup(dev);
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
- struct b43legacy_wl *wl = dev->wl;
struct b43legacy_phy *phy = &dev->phy;
u32 macctl;
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
- mutex_unlock(&wl->mutex);
- /* Must unlock as it would otherwise deadlock. No races here.
- * Cancel possibly pending workqueues. */
- cancel_work_sync(&dev->restart_work);
- mutex_lock(&wl->mutex);
-
b43legacy_leds_exit(dev);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
* field, but that would probably require resizing and moving of data
* within the beacon template. Simply request a new beacon and let
* mac80211 do the hard work. */
- beacon = ieee80211_beacon_get(hw, wl->vif, NULL);
+ beacon = ieee80211_beacon_get(hw, wl->vif);
if (unlikely(!beacon))
return -ENOMEM;
spin_lock_irqsave(&wl->irq_lock, flags);
}
static int b43legacy_op_ibss_beacon_update(struct ieee80211_hw *hw,
- struct sk_buff *beacon,
- struct ieee80211_tx_control *ctl)
+ struct sk_buff *beacon)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
unsigned long flags;
}
}
out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43legacy_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
/* fill hw info */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_RX_INCLUDES_FCS;
- hw->max_signal = 100;
- hw->max_rssi = -110;
- hw->max_noise = -110;
+ IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43legacy_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);