Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6.git] / drivers / net / ixgbe / ixgbe_main.c
index b2af2f6..6b483d3 100644 (file)
@@ -696,19 +696,19 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
                /* detected Tx unit hang */
                union ixgbe_adv_tx_desc *tx_desc;
                tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
-               DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-                       "  Tx Queue             <%d>\n"
-                       "  TDH, TDT             <%x>, <%x>\n"
-                       "  next_to_use          <%x>\n"
-                       "  next_to_clean        <%x>\n"
-                       "tx_buffer_info[next_to_clean]\n"
-                       "  time_stamp           <%lx>\n"
-                       "  jiffies              <%lx>\n",
-                       tx_ring->queue_index,
-                       IXGBE_READ_REG(hw, tx_ring->head),
-                       IXGBE_READ_REG(hw, tx_ring->tail),
-                       tx_ring->next_to_use, eop,
-                       tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+               e_err("Detected Tx Unit Hang\n"
+                     "  Tx Queue             <%d>\n"
+                     "  TDH, TDT             <%x>, <%x>\n"
+                     "  next_to_use          <%x>\n"
+                     "  next_to_clean        <%x>\n"
+                     "tx_buffer_info[next_to_clean]\n"
+                     "  time_stamp           <%lx>\n"
+                     "  jiffies              <%lx>\n",
+                     tx_ring->queue_index,
+                     IXGBE_READ_REG(hw, tx_ring->head),
+                     IXGBE_READ_REG(hw, tx_ring->tail),
+                     tx_ring->next_to_use, eop,
+                     tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
                return true;
        }
 
@@ -812,9 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
        if (adapter->detect_tx_hung) {
                if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
                        /* schedule immediate reset if we believe we hung */
-                       DPRINTK(PROBE, INFO,
-                               "tx hang %d detected, resetting adapter\n",
-                               adapter->tx_timeout_count + 1);
+                       e_info("tx hang %d detected, resetting adapter\n",
+                              adapter->tx_timeout_count + 1);
                        ixgbe_tx_timeout(adapter->netdev);
                }
        }
@@ -1653,10 +1652,10 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
                                return;
                        break;
                }
-               DPRINTK(DRV, ERR, "Network adapter has been stopped because it "
-                       "has over heated. Restart the computer. If the problem "
-                       "persists, power off the system and replace the "
-                       "adapter\n");
+               e_crit("Network adapter has been stopped because it "
+                      "has over heated. Restart the computer. If the problem "
+                      "persists, power off the system and replace the "
+                      "adapter\n");
                /* write to clear the interrupt */
                IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
        }
@@ -1668,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
 
        if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
            (eicr & IXGBE_EICR_GPI_SDP1)) {
-               DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n");
+               e_crit("Fan has stopped, replace the adapter\n");
                /* write to clear the interrupt */
                IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
        }
@@ -2154,9 +2153,8 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
                                  handler, 0, adapter->name[vector],
                                  adapter->q_vector[vector]);
                if (err) {
-                       DPRINTK(PROBE, ERR,
-                               "request_irq failed for MSIX interrupt "
-                               "Error: %d\n", err);
+                       e_err("request_irq failed for MSIX interrupt: "
+                             "Error: %d\n", err);
                        goto free_queue_irqs;
                }
        }
@@ -2165,8 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
        err = request_irq(adapter->msix_entries[vector].vector,
                          ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
        if (err) {
-               DPRINTK(PROBE, ERR,
-                       "request_irq for msix_lsc failed: %d\n", err);
+               e_err("request_irq for msix_lsc failed: %d\n", err);
                goto free_queue_irqs;
        }
 
@@ -2352,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
        }
 
        if (err)
-               DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
+               e_err("request_irq failed, Error %d\n", err);
 
        return err;
 }
@@ -2423,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
        map_vector_to_rxq(adapter, 0, 0);
        map_vector_to_txq(adapter, 0, 0);
 
-       DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
+       e_info("Legacy interrupt IVAR setup done\n");
 }
 
 /**
@@ -3257,8 +3254,8 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
                        msleep(1);
        }
        if (k >= IXGBE_MAX_RX_DESC_POLL) {
-               DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
-                       "not set within the polling period\n", rxr);
+               e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+                     "the polling period\n", rxr);
        }
        ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
                              (adapter->rx_ring[rxr]->count - 1));
@@ -3387,8 +3384,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
                        } while (--wait_loop &&
                                 !(txdctl & IXGBE_TXDCTL_ENABLE));
                        if (!wait_loop)
-                               DPRINTK(DRV, ERR, "Could not enable "
-                                       "Tx Queue %d\n", j);
+                               e_err("Could not enable Tx Queue %d\n", j);
                }
        }
 
@@ -3436,8 +3432,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
        if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
                u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                if (esdp & IXGBE_ESDP_SDP1)
-                       DPRINTK(DRV, CRIT,
-                               "Fan has stopped, replace the adapter\n");
+                       e_crit("Fan has stopped, replace the adapter\n");
        }
 
        /*
@@ -3466,7 +3461,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
        } else {
                err = ixgbe_non_sfp_link_config(hw);
                if (err)
-                       DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
+                       e_err("link_config FAILED %d\n", err);
        }
 
        for (i = 0; i < adapter->num_tx_queues; i++)
@@ -3527,19 +3522,19 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
        case IXGBE_ERR_SFP_NOT_PRESENT:
                break;
        case IXGBE_ERR_MASTER_REQUESTS_PENDING:
-               dev_err(&adapter->pdev->dev, "master disable timed out\n");
+               e_dev_err("master disable timed out\n");
                break;
        case IXGBE_ERR_EEPROM_VERSION:
                /* We are running on a pre-production device, log a warning */
-               dev_warn(&adapter->pdev->dev, "This device is a pre-production "
-                        "adapter/LOM.  Please be aware there may be issues "
-                        "associated with your hardware.  If you are "
-                        "experiencing problems please contact your Intel or "
-                        "hardware representative who provided you with this "
-                        "hardware.\n");
+               e_dev_warn("This device is a pre-production adapter/LOM. "
+                          "Please be aware there may be issuesassociated with "
+                          "your hardware.  If you are experiencing problems "
+                          "please contact your Intel or hardware "
+                          "representative who provided you with this "
+                          "hardware.\n");
                break;
        default:
-               dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+               e_dev_err("Hardware Error: %d\n", err);
        }
 
        /* reprogram the RAR[0] in case user changed it. */
@@ -3920,12 +3915,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
                adapter->num_tx_queues = 1;
 #ifdef CONFIG_IXGBE_DCB
                if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-                       DPRINTK(PROBE, INFO, "FCoE enabled with DCB\n");
+                       e_info("FCoE enabled with DCB\n");
                        ixgbe_set_dcb_queues(adapter);
                }
 #endif
                if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-                       DPRINTK(PROBE, INFO, "FCoE enabled with RSS\n");
+                       e_info("FCoE enabled with RSS\n");
                        if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
                            (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
                                ixgbe_set_fdir_queues(adapter);
@@ -4038,7 +4033,8 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
                 * This just means we'll go with either a single MSI
                 * vector or fall back to legacy interrupts.
                 */
-               DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
+               netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+                            "Unable to allocate MSI-X interrupts\n");
                adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
                kfree(adapter->msix_entries);
                adapter->msix_entries = NULL;
@@ -4435,8 +4431,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
        if (!err) {
                adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
        } else {
-               DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
-                       "falling back to legacy.  Error: %d\n", err);
+               netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+                            "Unable to allocate MSI interrupt, "
+                            "falling back to legacy.  Error: %d\n", err);
                /* reset err */
                err = 0;
        }
@@ -4557,27 +4554,25 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 
        err = ixgbe_set_interrupt_capability(adapter);
        if (err) {
-               DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
+               e_dev_err("Unable to setup interrupt capabilities\n");
                goto err_set_interrupt;
        }
 
        err = ixgbe_alloc_q_vectors(adapter);
        if (err) {
-               DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
-                       "vectors\n");
+               e_dev_err("Unable to allocate memory for queue vectors\n");
                goto err_alloc_q_vectors;
        }
 
        err = ixgbe_alloc_queues(adapter);
        if (err) {
-               DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+               e_dev_err("Unable to allocate memory for queues\n");
                goto err_alloc_queues;
        }
 
-       DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
-               "Tx Queue count = %u\n",
-               (adapter->num_rx_queues > 1) ? "Enabled" :
-               "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+       e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+              (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+              adapter->num_rx_queues, adapter->num_tx_queues);
 
        set_bit(__IXGBE_DOWN, &adapter->state);
 
@@ -4648,15 +4643,13 @@ static void ixgbe_sfp_task(struct work_struct *work)
                        goto reschedule;
                ret = hw->phy.ops.reset(hw);
                if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-                       dev_err(&adapter->pdev->dev, "failed to initialize "
-                               "because an unsupported SFP+ module type "
-                               "was detected.\n"
-                               "Reload the driver after installing a "
-                               "supported module.\n");
+                       e_dev_err("failed to initialize because an unsupported "
+                                 "SFP+ module type was detected.\n");
+                       e_dev_err("Reload the driver after installing a "
+                                 "supported module.\n");
                        unregister_netdev(adapter->netdev);
                } else {
-                       DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
-                               hw->phy.sfp_type);
+                       e_info("detected SFP+: %d\n", hw->phy.sfp_type);
                }
                /* don't need this routine any more */
                clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
@@ -4783,7 +4776,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 
        /* initialize eeprom parameters */
        if (ixgbe_init_eeprom_params_generic(hw)) {
-               dev_err(&pdev->dev, "EEPROM initialization failed\n");
+               e_dev_err("EEPROM initialization failed\n");
                return -EIO;
        }
 
@@ -4836,8 +4829,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 err:
        vfree(tx_ring->tx_buffer_info);
        tx_ring->tx_buffer_info = NULL;
-       DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit "
-                           "descriptor ring\n");
+       e_err("Unable to allocate memory for the Tx descriptor ring\n");
        return -ENOMEM;
 }
 
@@ -4859,7 +4851,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
                err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
                if (!err)
                        continue;
-               DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
+               e_err("Allocation for Tx Queue %u failed\n", i);
                break;
        }
 
@@ -4884,8 +4876,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
        if (!rx_ring->rx_buffer_info)
                rx_ring->rx_buffer_info = vmalloc(size);
        if (!rx_ring->rx_buffer_info) {
-               DPRINTK(PROBE, ERR,
-                       "vmalloc allocation failed for the rx desc ring\n");
+               e_err("vmalloc allocation failed for the Rx desc ring\n");
                goto alloc_failed;
        }
        memset(rx_ring->rx_buffer_info, 0, size);
@@ -4898,8 +4889,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
                                           &rx_ring->dma, GFP_KERNEL);
 
        if (!rx_ring->desc) {
-               DPRINTK(PROBE, ERR,
-                       "Memory allocation failed for the rx desc ring\n");
+               e_err("Memory allocation failed for the Rx desc ring\n");
                vfree(rx_ring->rx_buffer_info);
                goto alloc_failed;
        }
@@ -4932,7 +4922,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
                err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
                if (!err)
                        continue;
-               DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
+               e_err("Allocation for Rx Queue %u failed\n", i);
                break;
        }
 
@@ -5031,8 +5021,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
        if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
                return -EINVAL;
 
-       DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
-               netdev->mtu, new_mtu);
+       e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
        /* must set new MTU before calling down or up */
        netdev->mtu = new_mtu;
 
@@ -5145,8 +5134,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
        err = pci_enable_device_mem(pdev);
        if (err) {
-               printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
-                               "suspend\n");
+               e_dev_err("Cannot enable PCI device from suspend\n");
                return err;
        }
        pci_set_master(pdev);
@@ -5155,8 +5143,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
        err = ixgbe_init_interrupt_scheme(adapter);
        if (err) {
-               printk(KERN_ERR "ixgbe: Cannot initialize interrupts for "
-                               "device\n");
+               e_dev_err("Cannot initialize interrupts for device\n");
                return err;
        }
 
@@ -5512,10 +5499,10 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
        err = hw->phy.ops.identify_sfp(hw);
 
        if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-               dev_err(&adapter->pdev->dev, "failed to initialize because "
-                       "an unsupported SFP+ module type was detected.\n"
-                       "Reload the driver after installing a supported "
-                       "module.\n");
+               e_dev_err("failed to initialize because an unsupported SFP+ "
+                         "module type was detected.\n");
+               e_dev_err("Reload the driver after installing a supported "
+                         "module.\n");
                unregister_netdev(adapter->netdev);
                return;
        }
@@ -5544,8 +5531,8 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
                        set_bit(__IXGBE_FDIR_INIT_DONE,
                                &(adapter->tx_ring[i]->reinit_state));
        } else {
-               DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
-                       "ignored adding FDIR ATR filters\n");
+               e_err("failed to finish FDIR re-initialization, "
+                     "ignored adding FDIR ATR filters\n");
        }
        /* Done FDIR Re-initialization, enable transmits */
        netif_tx_start_all_queues(adapter->netdev);
@@ -5616,16 +5603,14 @@ static void ixgbe_watchdog_task(struct work_struct *work)
                                flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
                        }
 
-                       printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
-                              "Flow Control: %s\n",
-                              netdev->name,
+                       e_info("NIC Link is Up %s, Flow Control: %s\n",
                               (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
-                               "10 Gbps" :
-                               (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
-                                "1 Gbps" : "unknown speed")),
+                              "10 Gbps" :
+                              (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+                              "1 Gbps" : "unknown speed")),
                               ((flow_rx && flow_tx) ? "RX/TX" :
-                               (flow_rx ? "RX" :
-                               (flow_tx ? "TX" : "None"))));
+                              (flow_rx ? "RX" :
+                              (flow_tx ? "TX" : "None"))));
 
                        netif_carrier_on(netdev);
                } else {
@@ -5636,8 +5621,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
                adapter->link_up = false;
                adapter->link_speed = 0;
                if (netif_carrier_ok(netdev)) {
-                       printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
-                              netdev->name);
+                       e_info("NIC Link is Down\n");
                        netif_carrier_off(netdev);
                }
        }
@@ -5813,9 +5797,8 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
                                break;
                        default:
                                if (unlikely(net_ratelimit())) {
-                                       DPRINTK(PROBE, WARNING,
-                                        "partial checksum but proto=%x!\n",
-                                        skb->protocol);
+                                       e_warn("partial checksum but "
+                                              "proto=%x!\n", skb->protocol);
                                }
                                break;
                        }
@@ -5926,7 +5909,7 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
        return count;
 
 dma_error:
-       dev_err(&pdev->dev, "TX DMA map failed\n");
+       e_dev_err("TX DMA map failed\n");
 
        /* clear timestamp and dma mappings for failed tx_buffer_info map */
        tx_buffer_info->dma = 0;
@@ -6423,8 +6406,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
        adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
        err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
        if (err) {
-               DPRINTK(PROBE, ERR,
-                       "Failed to enable PCI sriov: %d\n", err);
+               e_err("Failed to enable PCI sriov: %d\n", err);
                goto err_novfs;
        }
        /* If call to enable VFs succeeded then allocate memory
@@ -6448,9 +6430,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
        }
 
        /* Oh oh */
-       DPRINTK(PROBE, ERR,
-               "Unable to allocate memory for VF "
-               "Data Storage - SRIOV disabled\n");
+       e_err("Unable to allocate memory for VF Data Storage - SRIOV "
+             "disabled\n");
        pci_disable_sriov(adapter->pdev);
 
 err_novfs:
@@ -6498,8 +6479,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                        err = dma_set_coherent_mask(&pdev->dev,
                                                    DMA_BIT_MASK(32));
                        if (err) {
-                               dev_err(&pdev->dev, "No usable DMA "
-                                       "configuration, aborting\n");
+                               e_dev_err("No usable DMA configuration, "
+                                         "aborting\n");
                                goto err_dma;
                        }
                }
@@ -6509,8 +6490,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
                                           IORESOURCE_MEM), ixgbe_driver_name);
        if (err) {
-               dev_err(&pdev->dev,
-                       "pci_request_selected_regions failed 0x%x\n", err);
+               e_dev_err("pci_request_selected_regions failed 0x%x\n", err);
                goto err_pci_reg;
        }
 
@@ -6621,8 +6601,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
                u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                if (esdp & IXGBE_ESDP_SDP1)
-                       DPRINTK(PROBE, CRIT,
-                               "Fan has stopped, replace the adapter\n");
+                       e_crit("Fan has stopped, replace the adapter\n");
        }
 
        /* reset_hw fills in the perm_addr as well */
@@ -6641,19 +6620,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                          round_jiffies(jiffies + (2 * HZ)));
                err = 0;
        } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-               dev_err(&adapter->pdev->dev, "failed to initialize because "
-                       "an unsupported SFP+ module type was detected.\n"
-                       "Reload the driver after installing a supported "
-                       "module.\n");
+               e_dev_err("failed to initialize because an unsupported SFP+ "
+                         "module type was detected.\n");
+               e_dev_err("Reload the driver after installing a supported "
+                         "module.\n");
                goto err_sw_init;
        } else if (err) {
-               dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+               e_dev_err("HW Init failed: %d\n", err);
                goto err_sw_init;
        }
 
        ixgbe_probe_vf(adapter, ii);
 
-       netdev->features = NETIF_F_SG |
+       netdev->features =    NETIF_F_SG |
                           NETIF_F_IP_CSUM |
                           NETIF_F_HW_VLAN_TX |
                           NETIF_F_HW_VLAN_RX |
@@ -6700,7 +6679,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
        /* make sure the EEPROM is good */
        if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
-               dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
+               e_dev_err("The EEPROM Checksum Is Not Valid\n");
                err = -EIO;
                goto err_eeprom;
        }
@@ -6709,7 +6688,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
 
        if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
-               dev_err(&pdev->dev, "invalid MAC address\n");
+               e_dev_err("invalid MAC address\n");
                err = -EIO;
                goto err_eeprom;
        }
@@ -6744,7 +6723,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        hw->mac.ops.get_bus_info(hw);
 
        /* print bus type/speed/width info */
-       dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
+       e_dev_info("(PCI Express:%s:%s) %pM\n",
                ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
                 (hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"),
                ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
@@ -6754,20 +6733,20 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                netdev->dev_addr);
        ixgbe_read_pba_num_generic(hw, &part_num);
        if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
-               dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n",
-                        hw->mac.type, hw->phy.type, hw->phy.sfp_type,
-                        (part_num >> 8), (part_num & 0xff));
+               e_dev_info("MAC: %d, PHY: %d, SFP+: %d, "
+                          "PBA No: %06x-%03x\n",
+                          hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+                          (part_num >> 8), (part_num & 0xff));
        else
-               dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-                        hw->mac.type, hw->phy.type,
-                        (part_num >> 8), (part_num & 0xff));
+               e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+                          hw->mac.type, hw->phy.type,
+                          (part_num >> 8), (part_num & 0xff));
 
        if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
-               dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
-                        "this card is not sufficient for optimal "
-                        "performance.\n");
-               dev_warn(&pdev->dev, "For optimal performance a x8 "
-                        "PCI-Express slot is required.\n");
+               e_dev_warn("PCI-Express bandwidth available for this card is "
+                          "not sufficient for optimal performance.\n");
+               e_dev_warn("For optimal performance a x8 PCI-Express slot "
+                          "is required.\n");
        }
 
        /* save off EEPROM version number */
@@ -6778,12 +6757,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
        if (err == IXGBE_ERR_EEPROM_VERSION) {
                /* We are running on a pre-production device, log a warning */
-               dev_warn(&pdev->dev, "This device is a pre-production "
-                        "adapter/LOM.  Please be aware there may be issues "
-                        "associated with your hardware.  If you are "
-                        "experiencing problems please contact your Intel or "
-                        "hardware representative who provided you with this "
-                        "hardware.\n");
+               e_dev_warn("This device is a pre-production adapter/LOM. "
+                          "Please be aware there may be issues associated "
+                          "with your hardware.  If you are experiencing "
+                          "problems please contact your Intel or hardware "
+                          "representative who provided you with this "
+                          "hardware.\n");
        }
        strcpy(netdev->name, "eth%d");
        err = register_netdev(netdev);
@@ -6806,8 +6785,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        }
 #endif
        if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-               DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
-                       adapter->num_vfs);
+               e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
                for (i = 0; i < adapter->num_vfs; i++)
                        ixgbe_vf_configuration(pdev, (i | 0x10000000));
        }
@@ -6815,7 +6793,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        /* add san mac addr to netdev */
        ixgbe_add_sanmac_netdev(netdev);
 
-       dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
+       e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
        cards_found++;
        return 0;
 
@@ -6905,7 +6883,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
        pci_release_selected_regions(pdev, pci_select_bars(pdev,
                                     IORESOURCE_MEM));
 
-       DPRINTK(PROBE, INFO, "complete\n");
+       e_dev_info("complete\n");
 
        free_netdev(netdev);
 
@@ -6955,8 +6933,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
        int err;
 
        if (pci_enable_device_mem(pdev)) {
-               DPRINTK(PROBE, ERR,
-                       "Cannot re-enable PCI device after reset.\n");
+               e_err("Cannot re-enable PCI device after reset.\n");
                result = PCI_ERS_RESULT_DISCONNECT;
        } else {
                pci_set_master(pdev);
@@ -6972,8 +6949,8 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 
        err = pci_cleanup_aer_uncorrect_error_status(pdev);
        if (err) {
-               dev_err(&pdev->dev,
-                 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
+               e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+                         "failed 0x%0x\n", err);
                /* non-fatal, continue */
        }
 
@@ -6994,7 +6971,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
 
        if (netif_running(netdev)) {
                if (ixgbe_up(adapter)) {
-                       DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n");
+                       e_info("ixgbe_up failed after reset\n");
                        return;
                }
        }
@@ -7030,10 +7007,9 @@ static struct pci_driver ixgbe_driver = {
 static int __init ixgbe_init_module(void)
 {
        int ret;
-       printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name,
-              ixgbe_driver_string, ixgbe_driver_version);
-
-       printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
+       pr_info("%s - version %s\n", ixgbe_driver_string,
+                  ixgbe_driver_version);
+       pr_info("%s\n", ixgbe_copyright);
 
 #ifdef CONFIG_IXGBE_DCA
        dca_register_notify(&dca_notifier);
@@ -7072,18 +7048,17 @@ static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
 }
 
 #endif /* CONFIG_IXGBE_DCA */
-#ifdef DEBUG
+
 /**
- * ixgbe_get_hw_dev_name - return device name string
+ * ixgbe_get_hw_dev return device
  * used by hardware layer to print debugging information
  **/
-char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw)
+struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw)
 {
        struct ixgbe_adapter *adapter = hw->back;
-       return adapter->netdev->name;
+       return adapter->netdev;
 }
 
-#endif
 module_exit(ixgbe_exit_module);
 
 /* ixgbe_main.c */