2001/11/17 - Added ethtool support (jgarzik)
- 2002/10/28 - Locking updates for 2.5 (alan@redhat.com)
+ 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk)
*/
#include <linux/errno.h>
#include <linux/in.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
#define WAIT_TX_AVAIL 200
/* Operational parameter that usually are not changed. */
-#define TX_TIMEOUT 40 /* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT ((4*HZ)/10) /* Time in jiffies before concluding Tx hung */
/* The size here is somewhat misleading: the Corkscrew also uses the ISA
aliased registers at <base>+0x400.
struct pnp_dev *idev, int card_number);
static int corkscrew_open(struct net_device *dev);
static void corkscrew_timer(unsigned long arg);
-static int corkscrew_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int corkscrew_rx(struct net_device *dev);
static void corkscrew_timeout(struct net_device *dev);
static int boomerang_rx(struct net_device *dev);
if (debug >= 0)
corkscrew_debug = debug;
if (corkscrew_debug)
- printk(version);
+ pr_debug("%s", version);
while (corkscrew_scan(-1))
found++;
return found ? 0 : -ENODEV;
if (corkscrew_debug > 0 && !printed) {
printed = 1;
- printk(version);
+ pr_debug("%s", version);
}
return dev;
if (pnp_device_attach(idev) < 0)
continue;
if (pnp_activate_dev(idev) < 0) {
- printk("pnp activate failed (out of resources?)\n");
+ pr_warning("pnp activate failed (out of resources?)\n");
pnp_device_detach(idev);
continue;
}
continue;
}
if(corkscrew_debug)
- printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+ pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
- printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
SET_NETDEV_DEV(dev, &idev->dev);
if (!check_device(ioaddr))
continue;
- printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
if (!err)
return NULL;
}
+
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = corkscrew_open,
+ .ndo_stop = corkscrew_close,
+ .ndo_start_xmit = corkscrew_start_xmit,
+ .ndo_tx_timeout = corkscrew_timeout,
+ .ndo_get_stats = corkscrew_get_stats,
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+
static int corkscrew_setup(struct net_device *dev, int ioaddr,
struct pnp_dev *idev, int card_number)
{
unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
int i;
int irq;
- DECLARE_MAC_BUF(mac);
+#ifdef __ISAPNP__
if (idev) {
irq = pnp_irq(idev, 0);
vp->dev = &idev->dev;
} else {
irq = inw(ioaddr + 0x2002) & 15;
}
+#else
+ irq = inw(ioaddr + 0x2002) & 15;
+#endif
dev->base_addr = ioaddr;
dev->irq = irq;
list_add(&vp->list, &root_corkscrew_dev);
#endif
- printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+ pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
spin_lock_init(&vp->lock);
}
checksum = (checksum ^ (checksum >> 8)) & 0xff;
if (checksum != 0x00)
- printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
- printk(" %s", print_mac(mac, dev->dev_addr));
+ pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ pr_cont(" %pM", dev->dev_addr);
if (eeprom[16] == 0x11c7) { /* Corkscrew */
if (request_dma(dev->dma, "3c515")) {
- printk(", DMA %d allocation failed", dev->dma);
+ pr_cont(", DMA %d allocation failed", dev->dma);
dev->dma = 0;
} else
- printk(", DMA %d", dev->dma);
+ pr_cont(", DMA %d", dev->dma);
}
- printk(", IRQ %d\n", dev->irq);
+ pr_cont(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
- printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n");
+ pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
{
- char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
+ static const char * const ram_split[] = {
+ "5:3", "3:1", "1:1", "3:5"
+ };
__u32 config;
EL3WINDOW(3);
vp->available_media = inw(ioaddr + Wn3_Options);
config = inl(ioaddr + Wn3_Config);
if (corkscrew_debug > 1)
- printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n",
+ pr_info(" Internal config register is %4.4x, transceivers %#x.\n",
config, inw(ioaddr + Wn3_Options));
- printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
8 << config & Ram_size,
config & Ram_width ? "word" : "byte",
ram_split[(config & Ram_split) >> Ram_split_shift],
dev->if_port = vp->default_media;
}
if (vp->media_override != 7) {
- printk(KERN_INFO " Media override to transceiver type %d (%s).\n",
+ pr_info(" Media override to transceiver type %d (%s).\n",
vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
/* The 3c51x-specific entries in the device structure. */
- dev->open = &corkscrew_open;
- dev->hard_start_xmit = &corkscrew_start_xmit;
- dev->tx_timeout = &corkscrew_timeout;
+ dev->netdev_ops = &netdev_ops;
dev->watchdog_timeo = (400 * HZ) / 1000;
- dev->stop = &corkscrew_close;
- dev->get_stats = &corkscrew_get_stats;
- dev->set_multicast_list = &set_rx_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
return register_netdev(dev);
if (vp->media_override != 7) {
if (corkscrew_debug > 1)
- printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+ pr_info("%s: Media override to transceiver %d (%s).\n",
dev->name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
dev->if_port = media_tbl[dev->if_port].next;
if (corkscrew_debug > 1)
- printk("%s: Initial media type %s.\n",
+ pr_debug("%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
init_timer(&vp->timer);
vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
vp->timer.data = (unsigned long) dev;
- vp->timer.function = &corkscrew_timer; /* timer handler */
+ vp->timer.function = corkscrew_timer; /* timer handler */
add_timer(&vp->timer);
} else
dev->if_port = vp->default_media;
outl(config, ioaddr + Wn3_Config);
if (corkscrew_debug > 1) {
- printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
+ pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
dev->name, config);
}
/* Use the now-standard shared IRQ implementation. */
if (vp->capabilities == 0x11c7) {
/* Corkscrew: Cannot share ISA resources. */
- if (dev->irq == 0
- || dev->dma == 0
- || request_irq(dev->irq, &corkscrew_interrupt, 0,
- vp->product_name, dev)) return -EAGAIN;
+ if (dev->irq == 0 ||
+ dev->dma == 0 ||
+ request_irq(dev->irq, corkscrew_interrupt, 0,
+ vp->product_name, dev))
+ return -EAGAIN;
enable_dma(dev->dma);
set_dma_mode(dev->dma, DMA_MODE_CASCADE);
- } else if (request_irq(dev->irq, &corkscrew_interrupt, IRQF_SHARED,
+ } else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED,
vp->product_name, dev)) {
return -EAGAIN;
}
if (corkscrew_debug > 1) {
EL3WINDOW(4);
- printk("%s: corkscrew_open() irq %d media status %4.4x.\n",
+ pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
dev->name, dev->irq, inw(ioaddr + Wn4_Media));
}
if (vp->full_bus_master_rx) { /* Boomerang bus master. */
vp->cur_rx = vp->dirty_rx = 0;
if (corkscrew_debug > 2)
- printk("%s: Filling in the Rx ring.\n",
- dev->name);
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
if (i < (RX_RING_SIZE - 1))
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
}
- vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+ if (i != 0)
+ vp->rx_ring[i - 1].next =
+ isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
}
if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
int ok = 0;
if (corkscrew_debug > 1)
- printk("%s: Media selection timer tick happened, %s.\n",
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
dev->name, media_tbl[dev->if_port].name);
spin_lock_irqsave(&vp->lock, flags);
if (media_status & Media_LnkBeat) {
ok = 1;
if (corkscrew_debug > 1)
- printk("%s: Media %s has link beat, %x.\n",
+ pr_debug("%s: Media %s has link beat, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
} else if (corkscrew_debug > 1)
- printk("%s: Media %s is has no link beat, %x.\n",
+ pr_debug("%s: Media %s is has no link beat, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
break;
default: /* Other media types handled by Tx timeouts. */
if (corkscrew_debug > 1)
- printk("%s: Media %s is has no indication, %x.\n",
+ pr_debug("%s: Media %s is has no indication, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
if (dev->if_port == 8) { /* Go back to default. */
dev->if_port = vp->default_media;
if (corkscrew_debug > 1)
- printk("%s: Media selection failing, using default %s port.\n",
+ pr_debug("%s: Media selection failing, using default %s port.\n",
dev->name,
media_tbl[dev->if_port].name);
} else {
if (corkscrew_debug > 1)
- printk("%s: Media selection failed, now trying %s port.\n",
+ pr_debug("%s: Media selection failed, now trying %s port.\n",
dev->name,
media_tbl[dev->if_port].name);
vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
spin_unlock_irqrestore(&vp->lock, flags);
if (corkscrew_debug > 1)
- printk("%s: Media selection timer finished, %s.\n",
+ pr_debug("%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
#endif /* AUTOMEDIA */
- return;
}
static void corkscrew_timeout(struct net_device *dev)
struct corkscrew_private *vp = netdev_priv(dev);
int ioaddr = dev->base_addr;
- printk(KERN_WARNING
- "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
dev->name, inb(ioaddr + TxStatus),
inw(ioaddr + EL3_STATUS));
/* Slight code bloat to be user friendly. */
if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
- printk(KERN_WARNING
- "%s: Transmitter encountered 16 collisions -- network"
+ pr_warning("%s: Transmitter encountered 16 collisions --"
" network cable problem?\n", dev->name);
#ifndef final_version
- printk(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
+ pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
vp->cur_tx);
- printk(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+ pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
&vp->tx_ring[0]);
for (i = 0; i < TX_RING_SIZE; i++) {
- printk(" %d: %p length %8.8x status %8.8x\n", i,
+ pr_debug(" %d: %p length %8.8x status %8.8x\n", i,
&vp->tx_ring[i],
vp->tx_ring[i].length, vp->tx_ring[i].status);
}
if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
break;
outw(TxEnable, ioaddr + EL3_CMD);
- dev->trans_start = jiffies;
+ dev->trans_start = jiffies; /* prevent tx timeout */
dev->stats.tx_errors++;
dev->stats.tx_dropped++;
netif_wake_queue(dev);
}
-static int corkscrew_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct corkscrew_private *vp = netdev_priv(dev);
int ioaddr = dev->base_addr;
int i;
if (vp->tx_full) /* No room to transmit with */
- return 1;
+ return NETDEV_TX_BUSY;
if (vp->cur_tx != 0)
prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
else
prev_entry = NULL;
if (corkscrew_debug > 3)
- printk("%s: Trying to send a packet, Tx index %d.\n",
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
dev->name, vp->cur_tx);
/* vp->tx_full = 1; */
vp->tx_skbuff[entry] = skb;
prev_entry->status &= ~0x80000000;
netif_wake_queue(dev);
}
- dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* Put out the doubleword header... */
outl(skb->len, ioaddr + TX_FIFO);
outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD);
#endif /* bus master */
- dev->trans_start = jiffies;
/* Clear the Tx status stack. */
{
while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
if (corkscrew_debug > 2)
- printk("%s: Tx error, status %2.2x.\n",
+ pr_debug("%s: Tx error, status %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x04)
dev->stats.tx_fifo_errors++;
outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
}
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
status = inw(ioaddr + EL3_STATUS);
if (corkscrew_debug > 4)
- printk("%s: interrupt, status %4.4x, timer %d.\n",
+ pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
dev->name, status, latency);
if ((status & 0xE000) != 0xE000) {
static int donedidthis;
Ignore a single early interrupt, but don't hang the machine for
other interrupt problems. */
if (donedidthis++ > 100) {
- printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+ pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
dev->name, status, netif_running(dev));
free_irq(dev->irq, dev);
dev->irq = -1;
do {
if (corkscrew_debug > 5)
- printk("%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & RxComplete)
corkscrew_rx(dev);
if (status & TxAvailable) {
if (corkscrew_debug > 5)
- printk(" TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
if (status & StatsFull) { /* Empty statistics. */
static int DoneDidThat;
if (corkscrew_debug > 4)
- printk("%s: Updating stats.\n", dev->name);
+ pr_debug("%s: Updating stats.\n", dev->name);
update_stats(ioaddr, dev);
/* DEBUG HACK: Disable statistics as an interrupt source. */
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
int win, reg;
- printk("%s: Updating stats failed, disabling stats as an"
- " interrupt source.\n", dev->name);
+ pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
+ dev->name);
for (win = 0; win < 8; win++) {
EL3WINDOW(win);
- printk("\n Vortex window %d:", win);
+ pr_notice("Vortex window %d:", win);
for (reg = 0; reg < 16; reg++)
- printk(" %2.2x", inb(ioaddr + reg));
+ pr_cont(" %2.2x", inb(ioaddr + reg));
+ pr_cont("\n");
}
EL3WINDOW(7);
outw(SetIntrEnb | TxAvailable |
}
if (--i < 0) {
- printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x. "
- "Disabling functions (%4.4x).\n", dev->name,
- status, SetStatusEnb | ((~status) & 0x7FE));
+ pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
+ dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
/* Disable all pending interrupts. */
outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
spin_unlock(&lp->lock);
if (corkscrew_debug > 4)
- printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+ pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
return IRQ_HANDLED;
}
short rx_status;
if (corkscrew_debug > 5)
- printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
unsigned char rx_error = inb(ioaddr + RxErrors);
if (corkscrew_debug > 2)
- printk(" Rx error: status %2.2x.\n",
+ pr_debug(" Rx error: status %2.2x.\n",
rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01)
skb = dev_alloc_skb(pkt_len + 5 + 2);
if (corkscrew_debug > 4)
- printk("Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
- dev->last_rx = jiffies;
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
/* Wait a limited time to go to next packet. */
break;
continue;
} else if (corkscrew_debug)
- printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+ pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
}
outw(RxDiscard, ioaddr + EL3_CMD);
dev->stats.rx_dropped++;
int rx_status;
if (corkscrew_debug > 5)
- printk(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
if (rx_status & RxDError) { /* Error, update stats. */
unsigned char rx_error = rx_status >> 16;
if (corkscrew_debug > 2)
- printk(" Rx error: status %2.2x.\n",
+ pr_debug(" Rx error: status %2.2x.\n",
rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01)
dev->stats.rx_bytes += pkt_len;
if (corkscrew_debug > 4)
- printk("Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
/* Check if the packet is long enough to just accept without
copying to a properly sized skbuff. */
- if (pkt_len < rx_copybreak
- && (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
+ if (pkt_len < rx_copybreak &&
+ (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
/* 'skb_put()' points to the start of sk_buff data area. */
memcpy(skb_put(skb, pkt_len),
temp = skb_put(skb, pkt_len);
/* Remove this checking code for final release. */
if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
- printk("%s: Warning -- the skbuff addresses do not match"
+ pr_warning("%s: Warning -- the skbuff addresses do not match"
" in boomerang_rx: %p vs. %p / %p.\n",
dev->name,
isa_bus_to_virt(vp->
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
- dev->last_rx = jiffies;
dev->stats.rx_packets++;
}
entry = (++vp->cur_rx) % RX_RING_SIZE;
netif_stop_queue(dev);
if (corkscrew_debug > 1) {
- printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+ pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
dev->name, inw(ioaddr + EL3_STATUS),
inb(ioaddr + TxStatus));
- printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
- " tx_queued %d.\n", dev->name, rx_nocopy, rx_copy,
- queued_packet);
+ pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
+ dev->name, rx_nocopy, rx_copy, queued_packet);
}
del_timer(&vp->timer);
/* We change back to window 7 (not 1) with the Vortex. */
EL3WINDOW(7);
- return;
}
/* This new version of set_rx_mode() supports v1.4 kernels.
if (dev->flags & IFF_PROMISC) {
if (corkscrew_debug > 3)
- printk("%s: Setting promiscuous mode.\n",
+ pr_debug("%s: Setting promiscuous mode.\n",
dev->name);
new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
- } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
+ } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
} else
new_mode = SetRxFilter | RxStation | RxBroadcast;
}
}
#endif /* MODULE */
-
-/*
- * Local variables:
- * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c515.c"
- * c-indent-level: 4
- * tab-width: 4
- * End:
- */
Code Review / linux-2.6.git / blobdiff