if INPUT_KEYBOARD
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_ADP5520
+ tristate "Keypad Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for the keypad scan matrix
+ on Analog Devices ADP5520 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp5520-keys.
+
+config KEYBOARD_ADP5588
+ tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
+ depends on I2C
+ help
+ Say Y here if you want to use a ADP5588/87 attached to your
+ system I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adp5588-keys.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_ATKBD
- tristate "AT keyboard" if !X86_PC
+ tristate "AT keyboard" if EMBEDDED || !X86
default y
select SERIO
select SERIO_LIBPS2
- select SERIO_I8042 if X86_PC
+ select SERIO_I8042 if X86 && !X86_MRST
select SERIO_GSCPS2 if GSC
help
Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
right-hand column will be interpreted as the key shown in the
left-hand column.
-config KEYBOARD_SUNKBD
- tristate "Sun Type 4 and Type 5 keyboard"
- select SERIO
+config QT2160
+ tristate "Atmel AT42QT2160 Touch Sensor Chip"
+ depends on I2C && EXPERIMENTAL
help
- Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
- connected either to the Sun keyboard connector or to an serial
- (RS-232) port via a simple adapter.
+ If you say yes here you get support for Atmel AT42QT2160 Touch
+ Sensor chip as a keyboard input.
+
+ This driver can also be built as a module. If so, the module
+ will be called qt2160.
+
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
+ help
+ Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
- module will be called sunkbd.
+ module will be called bf54x-keys.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
To compile this driver as a module, choose M here: the
module will be called lkkbd.
-config KEYBOARD_LOCOMO
- tristate "LoCoMo Keyboard Support"
- depends on SHARP_LOCOMO && INPUT_KEYBOARD
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
help
- Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
- module will be called locomokbd.
+ module will be called ep93xx_keypad.
-config KEYBOARD_XTKBD
- tristate "XT keyboard"
- select SERIO
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
help
- Say Y here if you want to use the old IBM PC/XT keyboard (or
- compatible) on your system. This is only possible with a
- parallel port keyboard adapter, you cannot connect it to the
- keyboard port on a PC that runs Linux.
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
- To compile this driver as a module, choose M here: the
- module will be called xtkbd.
-
-config KEYBOARD_NEWTON
- tristate "Newton keyboard"
- select SERIO
- help
- Say Y here if you have a Newton keyboard on a serial port.
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
- module will be called newtonkbd.
+ module will be called gpio_keys.
-config KEYBOARD_CORGI
- tristate "Corgi keyboard"
- depends on PXA_SHARPSL
- default y
+config KEYBOARD_TCA6416
+ tristate "TCA6416 Keypad Support"
+ depends on I2C
help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
- series of PDAs.
+ This driver implements basic keypad functionality
+ for keys connected through TCA6416 IO expander
- To compile this driver as a module, choose M here: the
- module will be called corgikbd.
+ Say Y here if your device has keys connected to
+ TCA6416 IO expander. Your board-specific setup logic
+ must also provide pin-mask details(of which TCA6416 pins
+ are used for keypad).
-config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
- SL-C3000 and Sl-C3100 series of PDAs.
+ If enabled the complete TCA6416 device will be managed through
+ this driver.
- To compile this driver as a module, choose M here: the
- module will be called spitzkbd.
-config KEYBOARD_AMIGA
- tristate "Amiga keyboard"
- depends on AMIGA
+config KEYBOARD_MATRIX
+ tristate "GPIO driven matrix keypad support"
+ depends on GENERIC_GPIO
help
- Say Y here if you are running Linux on any AMIGA and have a keyboard
- attached.
+ Enable support for GPIO driven matrix keypad.
To compile this driver as a module, choose M here: the
- module will be called amikbd.
+ module will be called matrix_keypad.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
- depends on GSC
+ depends on GSC || HP300
default y
help
The "Human Interface Loop" is a older, 8-channel USB-like
However, it has been thoroughly tested and is stable.
If you want full HIL support including support for multiple
- keyboards, mices and tablets, you have to enable the
+ keyboards, mice, and tablets, you have to enable the
"HP System Device Controller i8042 Support" in the input/serio
submenu.
config KEYBOARD_HIL
- tristate "HP HIL keyboard support"
- depends on GSC
+ tristate "HP HIL keyboard/pointer support"
+ depends on GSC || HP300
default y
select HP_SDC
select HIL_MLC
help
The "Human Interface Loop" is a older, 8-channel USB-like
controller used in several Hewlett Packard models.
- This driver implements support for HIL-keyboards attached
+ This driver implements support for HIL-keyboards and pointing
+ devices (mice, tablets, touchscreens) attached
to your machine, so normally you should say Y here.
+config KEYBOARD_HP6XX
+ tristate "HP Jornada 6xx keyboard"
+ depends on SH_HP6XX
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada680_kbd.
+
+config KEYBOARD_HP7XX
+ tristate "HP Jornada 7xx keyboard"
+ depends on SA1100_JORNADA720_SSP && SA1100_SSP
+ help
+ Say Y here if you have a HP Jornada 710/720/728 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada720_kbd.
+
+config KEYBOARD_LM8323
+ tristate "LM8323 keypad chip"
+ depends on I2C
+ depends on LEDS_CLASS
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM8323 keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lm8323.
+
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
+ help
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+
+ To compile this driver as a module, choose M here: the
+ module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_MAX7359
+ tristate "Maxim MAX7359 Key Switch Controller"
+ depends on I2C
+ help
+ If you say yes here you get support for the Maxim MAX7359 Key
+ Switch Controller chip. This providers microprocessors with
+ management of up to 64 key switches
+
+ To compile this driver as a module, choose M here: the
+ module will be called max7359_keypad.
+
+config KEYBOARD_IMX
+ tristate "IMX keypad support"
+ depends on ARCH_MXC
+ help
+ Enable support for IMX keypad port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx_keypad.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
+
+config KEYBOARD_OPENCORES
+ tristate "OpenCores Keyboard Controller"
+ help
+ Say Y here if you want to use the OpenCores Keyboard Controller
+ http://www.opencores.org/project,keyboardcontroller
+
+ To compile this driver as a module, choose M here; the
+ module will be called opencores-kbd.
+
+config KEYBOARD_PXA27x
+ tristate "PXA27x/PXA3xx keypad support"
+ depends on PXA27x || PXA3xx
+ help
+ Enable support for PXA27x/PXA3xx keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa27x_keypad.
+
+config KEYBOARD_PXA930_ROTARY
+ tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
+ depends on CPU_PXA930 || CPU_PXA935
+ help
+ Enable support for PXA930/PXA935 Enhanced Rotary Controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa930_rotary.
+
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stowaway.
+
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sunkbd.
+
+config KEYBOARD_SH_KEYSC
+ tristate "SuperH KEYSC keypad support"
+ depends on SUPERH || ARCH_SHMOBILE
+ help
+ Say Y here if you want to use a keypad attached to the KEYSC block
+ on SuperH processors such as sh7722 and sh7343.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sh_keysc.
+
+config KEYBOARD_DAVINCI
+ tristate "TI DaVinci Key Scan"
+ depends on ARCH_DAVINCI_DM365
+ help
+ Say Y to enable keypad module support for the TI DaVinci
+ platforms (DM365).
+
+ To compile this driver as a module, choose M here: the
+ module will be called davinci_keyscan.
+
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ help
+ Say Y here if you want to use the OMAP keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap-keypad.
+
+config KEYBOARD_TWL4030
+ tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
+ depends on TWL4030_CORE
+ help
+ Say Y here if your board use the keypad controller on
+ TWL4030 family chips. It's safe to say enable this
+ even on boards that don't use the keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called twl4030_keypad.
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
+
+config KEYBOARD_W90P910
+ tristate "W90P910 Matrix Keypad support"
+ depends on ARCH_W90X900
+ help
+ Say Y here to enable the matrix keypad on evaluation board
+ based on W90P910.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w90p910_keypad.
+
endif
Code Review / linux-2.6.git / blobdiff