* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
-#define DRV_NAME "ide-floppy"
-
-#define IDEFLOPPY_VERSION "1.00"
-
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
-#include <linux/slab.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <scsi/scsi_ioctl.h>
#include <asm/byteorder.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
#include "ide-floppy.h"
-/* define to see debug info */
-#define IDEFLOPPY_DEBUG_LOG 0
-
-/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG(fmt, args...)
-
-#if IDEFLOPPY_DEBUG_LOG
-#define debug_log(fmt, args...) \
- printk(KERN_INFO "ide-floppy: " fmt, ## args)
-#else
-#define debug_log(fmt, args...) do {} while (0)
-#endif
-
-
-/* Some drives require a longer irq timeout. */
-#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
-
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
-
-/* Error code returned in rq->errors to the higher part of the driver. */
-#define IDEFLOPPY_ERROR_GENERAL 101
-
-static DEFINE_MUTEX(idefloppy_ref_mutex);
-
-#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
-
-#define ide_floppy_g(disk) \
- container_of((disk)->private_data, struct ide_floppy_obj, driver)
-
-static void idefloppy_cleanup_obj(struct kref *);
-
-static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
-{
- struct ide_floppy_obj *floppy = NULL;
-
- mutex_lock(&idefloppy_ref_mutex);
- floppy = ide_floppy_g(disk);
- if (floppy) {
- if (ide_device_get(floppy->drive))
- floppy = NULL;
- else
- kref_get(&floppy->kref);
- }
- mutex_unlock(&idefloppy_ref_mutex);
- return floppy;
-}
-
-static void ide_floppy_put(struct ide_floppy_obj *floppy)
-{
- ide_drive_t *drive = floppy->drive;
-
- mutex_lock(&idefloppy_ref_mutex);
- kref_put(&floppy->kref, idefloppy_cleanup_obj);
- ide_device_put(drive);
- mutex_unlock(&idefloppy_ref_mutex);
-}
-
/*
- * Used to finish servicing a request. For read/write requests, we will call
- * ide_end_request to pass to the next buffer.
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
*/
-static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- int error;
-
- debug_log("Reached %s\n", __func__);
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
- switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
- }
- if (error)
- floppy->failed_pc = NULL;
- /* Why does this happen? */
- if (!rq)
- return 0;
- if (!blk_special_request(rq)) {
- /* our real local end request function */
- ide_end_request(drive, uptodate, nsecs);
- return 0;
- }
- rq->errors = error;
- /* fixme: need to move this local also */
- ide_end_drive_cmd(drive, 0, 0);
- return 0;
-}
-
-static void idefloppy_update_buffers(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
+static int ide_floppy_callback(ide_drive_t *drive, int dsc)
{
+ struct ide_disk_obj *floppy = drive->driver_data;
+ struct ide_atapi_pc *pc = drive->pc;
struct request *rq = pc->rq;
- struct bio *bio = rq->bio;
-
- while ((bio = rq->bio) != NULL)
- idefloppy_end_request(drive, 1, 0);
-}
-
-static void ide_floppy_callback(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
int uptodate = pc->error ? 0 : 1;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
- if (floppy->failed_pc == pc)
- floppy->failed_pc = NULL;
+ if (drive->failed_pc == pc)
+ drive->failed_pc = NULL;
if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
- (pc->rq && blk_pc_request(pc->rq)))
+ rq->cmd_type == REQ_TYPE_BLOCK_PC)
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- u8 *buf = floppy->pc->buf;
+
+ u8 *buf = bio_data(rq->bio);
if (!pc->error) {
floppy->sense_key = buf[2] & 0x0F;
floppy->progress_indication = buf[15] & 0x80 ?
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
- if (floppy->failed_pc)
- debug_log("pc = %x, ", floppy->failed_pc->c[0]);
+ if (drive->failed_pc)
+ ide_debug_log(IDE_DBG_PC, "pc = %x",
+ drive->failed_pc->c[0]);
- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key, floppy->asc, floppy->ascq);
+ ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
+ "ascq = %x", floppy->sense_key,
+ floppy->asc, floppy->ascq);
} else
- printk(KERN_ERR "Error in REQUEST SENSE itself - "
- "Aborting request!\n");
+ printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
}
- idefloppy_end_request(drive, uptodate, 0);
-}
-
-void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_REQUEST_SENSE;
- pc->c[4] = 255;
- pc->req_xfer = 18;
-}
-
-/*
- * Called when an error was detected during the last packet command. We queue a
- * request sense packet command in the head of the request list.
- */
-static void idefloppy_retry_pc(ide_drive_t *drive)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct request *rq = &floppy->request_sense_rq;
- struct ide_atapi_pc *pc = &floppy->request_sense_pc;
-
- (void)ide_read_error(drive);
- ide_floppy_create_request_sense_cmd(pc);
- ide_queue_pc_head(drive, floppy->disk, pc, rq);
-}
-
-/* The usual interrupt handler called during a packet command. */
-static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
- idefloppy_retry_pc, NULL, ide_io_buffers);
-}
-
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
+ if (rq->cmd_type == REQ_TYPE_SPECIAL)
+ rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
- /* Timeout for the packet command */
- return IDEFLOPPY_WAIT_CMD;
+ return uptodate;
}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. idefloppy_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = IDEFLOPPY_WAIT_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
-}
-
-static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
+static void ide_floppy_report_error(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc)
{
- /* supress error messages resulting from Medium not present */
+ /* suppress error messages resulting from Medium not present */
if (floppy->sense_key == 0x02 &&
floppy->asc == 0x3a &&
floppy->ascq == 0x00)
return;
- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
+ printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
"asc = %2x, ascq = %2x\n",
floppy->drive->name, pc->c[0], floppy->sense_key,
floppy->asc, floppy->ascq);
}
-static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
+static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
+ struct ide_cmd *cmd,
+ struct ide_atapi_pc *pc)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_disk_obj *floppy = drive->driver_data;
- if (floppy->failed_pc == NULL &&
+ if (drive->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
- floppy->failed_pc = pc;
+ drive->failed_pc = pc;
+
/* Set the current packet command */
- floppy->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
+ unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
ide_floppy_report_error(floppy, pc);
+
/* Giving up */
- pc->error = IDEFLOPPY_ERROR_GENERAL;
+ pc->error = IDE_DRV_ERROR_GENERAL;
- floppy->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->failed_pc = NULL;
+ drive->pc_callback(drive, 0);
+ ide_complete_rq(drive, -EIO, done);
return ide_stopped;
}
- debug_log("Retry number - %d\n", pc->retries);
+ ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
pc->retries++;
- return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- IDEFLOPPY_WAIT_CMD, NULL);
+ return ide_issue_pc(drive, cmd);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
length += 32;
break;
default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
- "in create_mode_sense_cmd\n");
+ printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->req_xfer = length;
}
-static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_START_STOP_UNIT;
- pc->c[4] = start;
-}
-
-static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
+static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
+ struct ide_disk_obj *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
- int blocks = rq->nr_sectors / floppy->bs_factor;
+ int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
int cmd = rq_data_dir(rq);
- debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
- block, blocks);
+ ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
memcpy(rq->cmd, pc->c, 12);
pc->rq = rq;
- pc->b_count = 0;
- if (rq->cmd_flags & REQ_RW)
+ if (rq->cmd_flags & REQ_WRITE)
pc->flags |= PC_FLAG_WRITING;
- pc->buf = NULL;
- pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
+
pc->flags |= PC_FLAG_DMA_OK;
}
-static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
+static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
ide_init_pc(pc);
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
- pc->b_count = 0;
- if (rq->data_len && rq_data_dir(rq) == WRITE)
- pc->flags |= PC_FLAG_WRITING;
- pc->buf = rq->data;
- if (rq->bio)
+ if (blk_rq_bytes(rq)) {
pc->flags |= PC_FLAG_DMA_OK;
- /*
- * possibly problematic, doesn't look like ide-floppy correctly
- * handled scattered requests if dma fails...
- */
- pc->req_xfer = pc->buf_size = rq->data_len;
+ if (rq_data_dir(rq) == WRITE)
+ pc->flags |= PC_FLAG_WRITING;
+ }
}
-static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
- struct request *rq, sector_t block_s)
+static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
+ struct request *rq, sector_t block)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
+ struct ide_disk_obj *floppy = drive->driver_data;
+ struct ide_cmd cmd;
struct ide_atapi_pc *pc;
- unsigned long block = (unsigned long)block_s;
- debug_log("%s: dev: %s, cmd: 0x%x, cmd_type: %x, errors: %d\n",
- __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->cmd[0], rq->cmd_type, rq->errors);
+ ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
- debug_log("%s: sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
- __func__, (long)rq->sector, rq->nr_sectors,
- rq->current_nr_sectors);
+ if (drive->debug_mask & IDE_DBG_RQ)
+ blk_dump_rq_flags(rq, (rq->rq_disk
+ ? rq->rq_disk->disk_name
+ : "dev?"));
if (rq->errors >= ERROR_MAX) {
- if (floppy->failed_pc)
- ide_floppy_report_error(floppy, floppy->failed_pc);
- else
- printk(KERN_ERR "ide-floppy: %s: I/O error\n",
- drive->name);
- idefloppy_end_request(drive, 0, 0);
- return ide_stopped;
- }
- if (blk_fs_request(rq)) {
- if (((long)rq->sector % floppy->bs_factor) ||
- (rq->nr_sectors % floppy->bs_factor)) {
- printk(KERN_ERR "%s: unsupported r/w request size\n",
- drive->name);
- idefloppy_end_request(drive, 0, 0);
+ if (drive->failed_pc) {
+ ide_floppy_report_error(floppy, drive->failed_pc);
+ drive->failed_pc = NULL;
+ } else
+ printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
+
+ if (rq->cmd_type == REQ_TYPE_SPECIAL) {
+ rq->errors = 0;
+ ide_complete_rq(drive, 0, blk_rq_bytes(rq));
return ide_stopped;
+ } else
+ goto out_end;
+ }
+
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
+ if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
+ (blk_rq_sectors(rq) % floppy->bs_factor)) {
+ printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
+ drive->name);
+ goto out_end;
}
pc = &floppy->queued_pc;
- idefloppy_create_rw_cmd(floppy, pc, rq, block);
- } else if (blk_special_request(rq)) {
- pc = (struct ide_atapi_pc *) rq->buffer;
- } else if (blk_pc_request(rq)) {
+ idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
+ break;
+ case REQ_TYPE_SPECIAL:
+ case REQ_TYPE_SENSE:
+ pc = (struct ide_atapi_pc *)rq->special;
+ break;
+ case REQ_TYPE_BLOCK_PC:
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
- } else {
- blk_dump_rq_flags(rq,
- "ide-floppy: unsupported command in queue");
- idefloppy_end_request(drive, 0, 0);
- return ide_stopped;
+ break;
+ default:
+ BUG();
}
- ide_init_sg_cmd(drive, rq);
- ide_map_sg(drive, rq);
+ ide_prep_sense(drive, rq);
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ if (rq_data_dir(rq))
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
- pc->sg = hwif->sg_table;
- pc->sg_cnt = hwif->sg_nents;
+ cmd.rq = rq;
+
+ if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) {
+ ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
+ ide_map_sg(drive, &cmd);
+ }
pc->rq = rq;
- return idefloppy_issue_pc(drive, pc);
+ return ide_floppy_issue_pc(drive, &cmd, pc);
+out_end:
+ drive->failed_pc = NULL;
+ if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0)
+ rq->errors = -EIO;
+ ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
+ return ide_stopped;
}
/*
* Look at the flexible disk page parameters. We ignore the CHS capacity
* parameters and use the LBA parameters instead.
*/
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
- struct ide_atapi_pc pc;
- u8 *page;
+ u8 *page, buf[40];
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
- " parameters\n");
+ if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
+ printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
- if (pc.buf[3] & 0x80)
- drive->atapi_flags |= IDE_AFLAG_WP;
+ if (buf[3] & 0x80)
+ drive->dev_flags |= IDE_DFLAG_WP;
else
- drive->atapi_flags &= ~IDE_AFLAG_WP;
+ drive->dev_flags &= ~IDE_DFLAG_WP;
- set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP));
+ set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
- page = &pc.buf[8];
+ page = &buf[8];
- transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
- sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
- cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
- rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
- heads = pc.buf[8 + 4];
- sectors = pc.buf[8 + 5];
+ transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
+ sector_size = be16_to_cpup((__be16 *)&buf[8 + 6]);
+ cyls = be16_to_cpup((__be16 *)&buf[8 + 8]);
+ rpm = be16_to_cpup((__be16 *)&buf[8 + 28]);
+ heads = buf[8 + 4];
+ sectors = buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
if (memcmp(page, &floppy->flexible_disk_page, 32))
- printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
+ printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, cyls, heads,
sectors, transfer_rate / 8, sector_size, rpm);
lba_capacity = floppy->blocks * floppy->block_size;
if (capacity < lba_capacity) {
- printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
+ printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
capacity / floppy->block_size : 0;
+ drive->capacity64 = floppy->blocks * floppy->bs_factor;
}
+
return 0;
}
*/
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *cap_desc;
- u8 header_len, desc_cnt;
+ u8 pc_buf[256], header_len, desc_cnt;
int i, rc = 1, blocks, length;
+ ide_debug_log(IDE_DBG_FUNC, "enter");
+
drive->bios_cyl = 0;
drive->bios_head = drive->bios_sect = 0;
floppy->blocks = 0;
floppy->bs_factor = 1;
- set_capacity(floppy->disk, 0);
+ drive->capacity64 = 0;
ide_floppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
+ printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
- header_len = pc.buf[3];
- cap_desc = &pc.buf[4];
+ header_len = pc_buf[3];
+ cap_desc = &pc_buf[4];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
for (i = 0; i < desc_cnt; i++) {
unsigned int desc_start = 4 + i*8;
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+ blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
- debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
- i, blocks * length / 1024, blocks, length);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
+ "%d sector size",
+ i, blocks * length / 1024,
+ blocks, length);
if (i)
continue;
* the code below is valid only for the 1st descriptor, ie i=0
*/
- switch (pc.buf[desc_start + 4] & 0x03) {
+ switch (pc_buf[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
if (memcmp(cap_desc, &floppy->cap_desc, 8))
- printk(KERN_INFO "%s: %dkB, %d blocks, %d "
- "sector size\n", drive->name,
- blocks * length / 1024, blocks, length);
+ printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
+ "sector size\n",
+ drive->name, blocks * length / 1024,
+ blocks, length);
memcpy(&floppy->cap_desc, cap_desc, 8);
if (!length || length % 512) {
- printk(KERN_NOTICE "%s: %d bytes block size "
- "not supported\n", drive->name, length);
+ printk(KERN_NOTICE PFX "%s: %d bytes block size"
+ " not supported\n", drive->name, length);
} else {
floppy->blocks = blocks;
floppy->block_size = length;
floppy->bs_factor = length / 512;
if (floppy->bs_factor != 1)
- printk(KERN_NOTICE "%s: warning: non "
- "512 bytes block size not "
- "fully supported\n",
- drive->name);
+ printk(KERN_NOTICE PFX "%s: Warning: "
+ "non 512 bytes block size not "
+ "fully supported\n",
+ drive->name);
+ drive->capacity64 =
+ floppy->blocks * floppy->bs_factor;
rc = 0;
}
break;
* This is a KERN_ERR so it appears on screen
* for the user to see
*/
- printk(KERN_ERR "%s: No disk in drive\n", drive->name);
+ printk(KERN_ERR PFX "%s: No disk in drive\n",
+ drive->name);
break;
case CAPACITY_INVALID:
- printk(KERN_ERR "%s: Invalid capacity for disk "
+ printk(KERN_ERR PFX "%s: Invalid capacity for disk "
"in drive\n", drive->name);
break;
}
- debug_log("Descriptor 0 Code: %d\n",
- pc.buf[desc_start + 4] & 0x03);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
+ pc_buf[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- (void) ide_floppy_get_flexible_disk_page(drive);
-
- set_capacity(disk, floppy->blocks * floppy->bs_factor);
+ (void) ide_floppy_get_flexible_disk_page(drive, &pc);
return rc;
}
-static sector_t idefloppy_capacity(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- unsigned long capacity = floppy->blocks * floppy->bs_factor;
-
- return capacity;
-}
-
-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw(bios_cyl, 0, 1023, bios_cyl);
-ide_devset_rw(bios_head, 0, 255, bios_head);
-ide_devset_rw(bios_sect, 0, 63, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- floppy->ticks = arg;
- return 0;
-}
-
-IDE_DEVSET(ticks, S_RW, 0, 255, get_ticks, set_ticks);
-
-static const struct ide_devset *idefloppy_settings[] = {
- &ide_devset_bios_cyl,
- &ide_devset_bios_head,
- &ide_devset_bios_sect,
- &ide_devset_ticks,
- NULL
-};
-#endif
-
-static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
+static void ide_floppy_setup(ide_drive_t *drive)
{
+ struct ide_disk_obj *floppy = drive->driver_data;
u16 *id = drive->id;
- u8 gcw[2];
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];
- drive->pc_callback = ide_floppy_callback;
+ drive->pc_callback = ide_floppy_callback;
- if (((gcw[0] & 0x60) >> 5) == 1)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
* Just assume they are all broken, its easier.
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
- blk_queue_max_sectors(drive->queue, 64);
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
+ blk_queue_max_hw_sectors(drive->queue, 64);
}
/*
* nasty clicking noises without it, so please don't remove this.
*/
if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
- blk_queue_max_sectors(drive->queue, 64);
+ blk_queue_max_hw_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
/* IOMEGA Clik! drives do not support lock/unlock commands */
- drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
(void) ide_floppy_get_capacity(drive);
ide_proc_register_driver(drive, floppy->driver);
-}
-
-static void ide_floppy_remove(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct gendisk *g = floppy->disk;
-
- ide_proc_unregister_driver(drive, floppy->driver);
-
- del_gendisk(g);
- ide_floppy_put(floppy);
+ drive->dev_flags |= IDE_DFLAG_ATTACH;
}
-static void idefloppy_cleanup_obj(struct kref *kref)
+static void ide_floppy_flush(ide_drive_t *drive)
{
- struct ide_floppy_obj *floppy = to_ide_floppy(kref);
- ide_drive_t *drive = floppy->drive;
- struct gendisk *g = floppy->disk;
-
- drive->driver_data = NULL;
- g->private_data = NULL;
- put_disk(g);
- kfree(floppy);
}
-#ifdef CONFIG_IDE_PROC_FS
-static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
-static int ide_floppy_probe(ide_drive_t *);
-
-static ide_driver_t idefloppy_driver = {
- .gen_driver = {
- .owner = THIS_MODULE,
- .name = "ide-floppy",
- .bus = &ide_bus_type,
- },
- .probe = ide_floppy_probe,
- .remove = ide_floppy_remove,
- .version = IDEFLOPPY_VERSION,
- .media = ide_floppy,
- .do_request = idefloppy_do_request,
- .end_request = idefloppy_end_request,
- .error = __ide_error,
-#ifdef CONFIG_IDE_PROC_FS
- .proc = idefloppy_proc,
- .settings = idefloppy_settings,
-#endif
-};
-
-static int idefloppy_open(struct inode *inode, struct file *filp)
-{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_floppy_obj *floppy;
- ide_drive_t *drive;
- struct ide_atapi_pc pc;
int ret = 0;
- debug_log("Reached %s\n", __func__);
-
- floppy = ide_floppy_get(disk);
- if (!floppy)
- return -ENXIO;
-
- drive = floppy->drive;
+ if (ide_do_test_unit_ready(drive, disk))
+ ide_do_start_stop(drive, disk, 1);
- floppy->openers++;
+ ret = ide_floppy_get_capacity(drive);
- if (floppy->openers == 1) {
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- /* Just in case */
-
- ide_init_pc(&pc);
- pc.c[0] = GPCMD_TEST_UNIT_READY;
-
- if (ide_queue_pc_tail(drive, disk, &pc)) {
- idefloppy_create_start_stop_cmd(&pc, 1);
- (void)ide_queue_pc_tail(drive, disk, &pc);
- }
+ set_capacity(disk, ide_gd_capacity(drive));
- if (ide_floppy_get_capacity(drive)
- && (filp->f_flags & O_NDELAY) == 0
- /*
- * Allow O_NDELAY to open a drive without a disk, or with an
- * unreadable disk, so that we can get the format capacity
- * of the drive or begin the format - Sam
- */
- ) {
- ret = -EIO;
- goto out_put_floppy;
- }
-
- if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) {
- ret = -EROFS;
- goto out_put_floppy;
- }
-
- drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
- ide_set_media_lock(drive, disk, 1);
- check_disk_change(inode->i_bdev);
- } else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
- ret = -EBUSY;
- goto out_put_floppy;
- }
- return 0;
-
-out_put_floppy:
- floppy->openers--;
- ide_floppy_put(floppy);
return ret;
}
-static int idefloppy_release(struct inode *inode, struct file *filp)
-{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
- ide_drive_t *drive = floppy->drive;
-
- debug_log("Reached %s\n", __func__);
-
- if (floppy->openers == 1) {
- ide_set_media_lock(drive, disk, 0);
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- }
-
- floppy->openers--;
-
- ide_floppy_put(floppy);
-
- return 0;
-}
-
-static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
- ide_drive_t *drive = floppy->drive;
-
- geo->heads = drive->bios_head;
- geo->sectors = drive->bios_sect;
- geo->cylinders = (u16)drive->bios_cyl; /* truncate */
- return 0;
-}
-
-static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned long arg, unsigned int cmd)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
-
- if (floppy->openers > 1)
- return -EBUSY;
-
- ide_set_media_lock(drive, disk, prevent);
-
- if (cmd == CDROMEJECT) {
- idefloppy_create_start_stop_cmd(pc, 2);
- (void)ide_queue_pc_tail(drive, disk, pc);
- }
-
- return 0;
-}
-
-static int idefloppy_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct block_device *bdev = inode->i_bdev;
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
- ide_drive_t *drive = floppy->drive;
- struct ide_atapi_pc pc;
- void __user *argp = (void __user *)arg;
- int err;
-
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
- return ide_floppy_lockdoor(drive, &pc, arg, cmd);
-
- err = ide_floppy_format_ioctl(drive, file, cmd, argp);
- if (err != -ENOTTY)
- return err;
-
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
- bdev->bd_disk, cmd, argp);
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
-
- return err;
-}
-
-static int idefloppy_media_changed(struct gendisk *disk)
-{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
- ide_drive_t *drive = floppy->drive;
- int ret;
-
- /* do not scan partitions twice if this is a removable device */
- if (drive->attach) {
- drive->attach = 0;
- return 0;
- }
- ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
- drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
- return ret;
-}
-
-static int idefloppy_revalidate_disk(struct gendisk *disk)
-{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
- set_capacity(disk, idefloppy_capacity(floppy->drive));
- return 0;
-}
-
-static struct block_device_operations idefloppy_ops = {
- .owner = THIS_MODULE,
- .open = idefloppy_open,
- .release = idefloppy_release,
- .ioctl = idefloppy_ioctl,
- .getgeo = idefloppy_getgeo,
- .media_changed = idefloppy_media_changed,
- .revalidate_disk = idefloppy_revalidate_disk
+const struct ide_disk_ops ide_atapi_disk_ops = {
+ .check = ide_check_atapi_device,
+ .get_capacity = ide_floppy_get_capacity,
+ .setup = ide_floppy_setup,
+ .flush = ide_floppy_flush,
+ .init_media = ide_floppy_init_media,
+ .set_doorlock = ide_set_media_lock,
+ .do_request = ide_floppy_do_request,
+ .ioctl = ide_floppy_ioctl,
};
-
-static int ide_floppy_probe(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy;
- struct gendisk *g;
-
- if (!strstr("ide-floppy", drive->driver_req))
- goto failed;
-
- if (drive->media != ide_floppy)
- goto failed;
-
- if (!ide_check_atapi_device(drive, DRV_NAME)) {
- printk(KERN_ERR "ide-floppy: %s: not supported by this version"
- " of ide-floppy\n", drive->name);
- goto failed;
- }
- floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
- if (!floppy) {
- printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
- " structure\n", drive->name);
- goto failed;
- }
-
- g = alloc_disk(1 << PARTN_BITS);
- if (!g)
- goto out_free_floppy;
-
- ide_init_disk(g, drive);
-
- kref_init(&floppy->kref);
-
- floppy->drive = drive;
- floppy->driver = &idefloppy_driver;
- floppy->disk = g;
-
- g->private_data = &floppy->driver;
-
- drive->driver_data = floppy;
-
- idefloppy_setup(drive, floppy);
-
- g->minors = 1 << PARTN_BITS;
- g->driverfs_dev = &drive->gendev;
- g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
- g->fops = &idefloppy_ops;
- drive->attach = 1;
- add_disk(g);
- return 0;
-
-out_free_floppy:
- kfree(floppy);
-failed:
- return -ENODEV;
-}
-
-static void __exit idefloppy_exit(void)
-{
- driver_unregister(&idefloppy_driver.gen_driver);
-}
-
-static int __init idefloppy_init(void)
-{
- printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
- return driver_register(&idefloppy_driver.gen_driver);
-}
-
-MODULE_ALIAS("ide:*m-floppy*");
-MODULE_ALIAS("ide-floppy");
-module_init(idefloppy_init);
-module_exit(idefloppy_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
-
Code Review / linux-2.6.git / blobdiff