hwmon: (max16064) Add support for peak attributes
[linux-2.6.git] / drivers / hwmon / f71882fg.c
index a65eac8..2d96ed2 100644 (file)
@@ -1,6 +1,6 @@
 /***************************************************************************
  *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
- *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
+ *   Copyright (C) 2007-2011 Hans de Goede <hdegoede@redhat.com>           *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
@@ -18,6 +18,8 @@
  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  ***************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 
 #define DRVNAME "f71882fg"
 
+#define SIO_F71858FG_LD_HWM    0x02    /* Hardware monitor logical device */
 #define SIO_F71882FG_LD_HWM    0x04    /* Hardware monitor logical device */
 #define SIO_UNLOCK_KEY         0x87    /* Key to enable Super-I/O */
-#define SIO_LOCK_KEY           0xAA    /* Key to diasble Super-I/O */
+#define SIO_LOCK_KEY           0xAA    /* Key to disable Super-I/O */
 
 #define SIO_REG_LDSEL          0x07    /* Logical device select */
 #define SIO_REG_DEVID          0x20    /* Device ID (2 bytes) */
 #define SIO_REG_ADDR           0x60    /* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID          0x1934  /* Manufacturers ID */
+#define SIO_F71808E_ID         0x0901  /* Chipset ID */
+#define SIO_F71808A_ID         0x1001  /* Chipset ID */
+#define SIO_F71858_ID          0x0507  /* Chipset ID */
 #define SIO_F71862_ID          0x0601  /* Chipset ID */
+#define SIO_F71869_ID          0x0814  /* Chipset ID */
+#define SIO_F71869A_ID         0x1007  /* Chipset ID */
 #define SIO_F71882_ID          0x0541  /* Chipset ID */
+#define SIO_F71889_ID          0x0723  /* Chipset ID */
+#define SIO_F71889E_ID         0x0909  /* Chipset ID */
+#define SIO_F71889A_ID         0x1005  /* Chipset ID */
 #define SIO_F8000_ID           0x0581  /* Chipset ID */
+#define SIO_F81865_ID          0x0704  /* Chipset ID */
 
 #define REGION_LENGTH          8
 #define ADDR_REG_OFFSET                5
 #define DATA_REG_OFFSET                6
 
-#define F71882FG_REG_PECI              0x0A
-
-#define F71882FG_REG_IN_STATUS         0x12 /* f71882fg only */
-#define F71882FG_REG_IN_BEEP           0x13 /* f71882fg only */
+#define F71882FG_REG_IN_STATUS         0x12 /* f7188x only */
+#define F71882FG_REG_IN_BEEP           0x13 /* f7188x only */
 #define F71882FG_REG_IN(nr)            (0x20  + (nr))
-#define F71882FG_REG_IN1_HIGH          0x32 /* f71882fg only */
+#define F71882FG_REG_IN1_HIGH          0x32 /* f7188x only */
 
 #define F71882FG_REG_FAN(nr)           (0xA0 + (16 * (nr)))
 #define F71882FG_REG_FAN_TARGET(nr)    (0xA2 + (16 * (nr)))
@@ -70,6 +80,7 @@
 #define F71882FG_REG_TEMP_HIGH(nr)     (0x81 + 2 * (nr))
 #define F71882FG_REG_TEMP_STATUS       0x62
 #define F71882FG_REG_TEMP_BEEP         0x63
+#define F71882FG_REG_TEMP_CONFIG       0x69
 #define F71882FG_REG_TEMP_HYST(nr)     (0x6C + (nr))
 #define F71882FG_REG_TEMP_TYPE         0x6B
 #define F71882FG_REG_TEMP_DIODE_OPEN   0x6F
 
 #define F71882FG_REG_FAN_HYST(nr)      (0x98 + (nr))
 
+#define F71882FG_REG_FAN_FAULT_T       0x9F
+#define F71882FG_FAN_NEG_TEMP_EN       0x20
+#define F71882FG_FAN_PROG_SEL          0x80
+
 #define F71882FG_REG_POINT_PWM(pwm, point)     (0xAA + (point) + (16 * (pwm)))
 #define F71882FG_REG_POINT_TEMP(pwm, point)    (0xA6 + (point) + (16 * (pwm)))
 #define F71882FG_REG_POINT_MAPPING(nr)         (0xAF + 16 * (nr))
 
 #define        F71882FG_REG_START              0x01
 
+#define F71882FG_MAX_INS               9
+
 #define FAN_MIN_DETECT                 366 /* Lowest detectable fanspeed */
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71862fg, f71882fg, f8000 };
+enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
+            f71889fg, f71889ed, f71889a, f8000, f81865f };
 
 static const char *f71882fg_names[] = {
+       "f71808e",
+       "f71808a",
+       "f71858fg",
        "f71862fg",
+       "f71869", /* Both f71869f and f71869e, reg. compatible and same id */
+       "f71869a",
        "f71882fg",
+       "f71889fg", /* f81801u too, same id */
+       "f71889ed",
+       "f71889a",
        "f8000",
+       "f81865f",
+};
+
+static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
+       [f71808e]       = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
+       [f71808a]       = { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
+       [f71858fg]      = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
+       [f71862fg]      = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71869]        = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71869a]       = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71882fg]      = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71889fg]      = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71889ed]      = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f71889a]       = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+       [f8000]         = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
+       [f81865f]       = { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+};
+
+static const char f71882fg_has_in1_alarm[] = {
+       [f71808e]       = 0,
+       [f71808a]       = 0,
+       [f71858fg]      = 0,
+       [f71862fg]      = 0,
+       [f71869]        = 0,
+       [f71869a]       = 0,
+       [f71882fg]      = 1,
+       [f71889fg]      = 1,
+       [f71889ed]      = 1,
+       [f71889a]       = 1,
+       [f8000]         = 0,
+       [f81865f]       = 1,
+};
+
+static const char f71882fg_fan_has_beep[] = {
+       [f71808e]       = 0,
+       [f71808a]       = 0,
+       [f71858fg]      = 0,
+       [f71862fg]      = 1,
+       [f71869]        = 1,
+       [f71869a]       = 1,
+       [f71882fg]      = 1,
+       [f71889fg]      = 1,
+       [f71889ed]      = 1,
+       [f71889a]       = 1,
+       [f8000]         = 0,
+       [f81865f]       = 1,
+};
+
+static const char f71882fg_nr_fans[] = {
+       [f71808e]       = 3,
+       [f71808a]       = 2, /* +1 fan which is monitor + simple pwm only */
+       [f71858fg]      = 3,
+       [f71862fg]      = 3,
+       [f71869]        = 3,
+       [f71869a]       = 3,
+       [f71882fg]      = 4,
+       [f71889fg]      = 3,
+       [f71889ed]      = 3,
+       [f71889a]       = 3,
+       [f8000]         = 3, /* +1 fan which is monitor only */
+       [f81865f]       = 2,
+};
+
+static const char f71882fg_temp_has_beep[] = {
+       [f71808e]       = 0,
+       [f71808a]       = 1,
+       [f71858fg]      = 0,
+       [f71862fg]      = 1,
+       [f71869]        = 1,
+       [f71869a]       = 1,
+       [f71882fg]      = 1,
+       [f71889fg]      = 1,
+       [f71889ed]      = 1,
+       [f71889a]       = 1,
+       [f8000]         = 0,
+       [f81865f]       = 1,
+};
+
+static const char f71882fg_nr_temps[] = {
+       [f71808e]       = 2,
+       [f71808a]       = 2,
+       [f71858fg]      = 3,
+       [f71862fg]      = 3,
+       [f71869]        = 3,
+       [f71869a]       = 3,
+       [f71882fg]      = 3,
+       [f71889fg]      = 3,
+       [f71889ed]      = 3,
+       [f71889a]       = 3,
+       [f8000]         = 3,
+       [f81865f]       = 2,
 };
 
 static struct platform_device *f71882fg_pdev;
@@ -105,7 +222,7 @@ static struct platform_device *f71882fg_pdev;
 /* Super-I/O Function prototypes */
 static inline int superio_inb(int base, int reg);
 static inline int superio_inw(int base, int reg);
-static inline void superio_enter(int base);
+static inline int superio_enter(int base);
 static inline void superio_select(int base, int ld);
 static inline void superio_exit(int base);
 
@@ -119,12 +236,14 @@ struct f71882fg_data {
        struct device *hwmon_dev;
 
        struct mutex update_lock;
+       int temp_start;                 /* temp numbering start (0 or 1) */
        char valid;                     /* !=0 if following fields are valid */
+       char auto_point_temp_signed;
        unsigned long last_updated;     /* In jiffies */
        unsigned long last_limits;      /* In jiffies */
 
        /* Register Values */
-       u8      in[9];
+       u8      in[F71882FG_MAX_INS];
        u8      in1_max;
        u8      in_status;
        u8      in_beep;
@@ -133,10 +252,10 @@ struct f71882fg_data {
        u16     fan_full_speed[4];
        u8      fan_status;
        u8      fan_beep;
-       /* Note: all models have only 3 temperature channels, but on some
+       /* Note: all models have max 3 temperature channels, but on some
           they are addressed as 0-2 and on others as 1-3, so for coding
           convenience we reserve space for 4 channels */
-       u8      temp[4];
+       u16     temp[4];
        u8      temp_ovt[4];
        u8      temp_high[4];
        u8      temp_hyst[2]; /* 2 hysts stored per reg */
@@ -144,12 +263,13 @@ struct f71882fg_data {
        u8      temp_status;
        u8      temp_beep;
        u8      temp_diode_open;
+       u8      temp_config;
        u8      pwm[4];
        u8      pwm_enable;
        u8      pwm_auto_point_hyst[2];
        u8      pwm_auto_point_mapping[4];
        u8      pwm_auto_point_pwm[4][5];
-       u8      pwm_auto_point_temp[4][4];
+       s8      pwm_auto_point_temp[4][4];
 };
 
 /* Sysfs in */
@@ -210,6 +330,10 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
        char *buf);
 static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
        const char *buf, size_t count);
+static ssize_t show_simple_pwm(struct device *dev,
+       struct device_attribute *devattr, char *buf);
+static ssize_t store_simple_pwm(struct device *dev,
+       struct device_attribute *devattr, const char *buf, size_t count);
 static ssize_t show_pwm_enable(struct device *dev,
        struct device_attribute *devattr, char *buf);
 static ssize_t store_pwm_enable(struct device *dev,
@@ -252,17 +376,49 @@ static struct platform_driver f71882fg_driver = {
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
-/* Temp and in attr common to both the f71862fg and f71882fg */
-static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
-       SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
-       SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
-       SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
-       SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
-       SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
-       SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
-       SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
-       SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
-       SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+/* Temp attr for the f71858fg, the f71858fg is special as it has its
+   temperature indexes start at 0 (the others start at 1) */
+static struct sensor_device_attribute_2 f71858fg_temp_attr[] = {
+       SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
+       SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+               store_temp_max, 0, 0),
+       SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+               store_temp_max_hyst, 0, 0),
+       SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
+       SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+               store_temp_crit, 0, 0),
+       SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+               0, 0),
+       SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+       SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
+       SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
+       SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+               store_temp_max, 0, 1),
+       SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+               store_temp_max_hyst, 0, 1),
+       SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
+       SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+               store_temp_crit, 0, 1),
+       SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+               0, 1),
+       SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
+       SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+       SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
+       SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+               store_temp_max, 0, 2),
+       SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+               store_temp_max_hyst, 0, 2),
+       SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
+       SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+               store_temp_crit, 0, 2),
+       SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+               0, 2),
+       SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+       SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
+/* Temp attr for the standard models */
+static struct sensor_device_attribute_2 fxxxx_temp_attr[3][9] = { {
        SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1),
        SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 1),
@@ -272,17 +428,14 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
           the max and crit alarms separately and lm_sensors v2 depends on the
           presence of temp#_alarm files. The same goes for temp2/3 _alarm. */
        SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
-       SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 1),
        SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 1),
        SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
                0, 1),
        SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
-       SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 5),
        SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1),
        SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+}, {
        SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2),
        SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 2),
@@ -290,17 +443,14 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
                store_temp_max_hyst, 0, 2),
        /* Should be temp2_max_alarm, see temp1_alarm note */
        SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
-       SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 2),
        SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 2),
        SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
                0, 2),
        SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
-       SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 6),
        SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2),
        SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+}, {
        SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3),
        SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 3),
@@ -308,113 +458,157 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
                store_temp_max_hyst, 0, 3),
        /* Should be temp3_max_alarm, see temp1_alarm note */
        SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3),
-       SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 3),
        SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 3),
        SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
                0, 3),
        SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7),
-       SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-               store_temp_beep, 0, 7),
        SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3),
        SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
-};
+} };
 
-/* Temp and in attr found only on the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
-       SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
-               0, 1),
-       SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
-               0, 1),
-       SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
-};
+/* Temp attr for models which can beep on temp alarm */
+static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { {
+       SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 1),
+       SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 5),
+}, {
+       SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 2),
+       SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 6),
+}, {
+       SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 3),
+       SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+               store_temp_beep, 0, 7),
+} };
 
-/* Temp and in attr for the f8000
+/* Temp attr for the f8000
    Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
    is used as hysteresis value to clear alarms
+   Also like the f71858fg its temperature indexes start at 0
  */
-static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
-       SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
-       SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
-       SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+static struct sensor_device_attribute_2 f8000_temp_attr[] = {
        SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
        SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 0),
        SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 0),
        SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+       SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
        SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
        SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 1),
        SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 1),
        SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
-       SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+       SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
        SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
        SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit,
                store_temp_crit, 0, 2),
        SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
                store_temp_max, 0, 2),
        SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+       SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
+/* in attr for all models */
+static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
+       SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+       SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+       SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+       SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
+       SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
+       SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
+       SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
+       SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
+       SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+};
+
+/* For models with in1 alarm capability */
+static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
+       SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
+               0, 1),
+       SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
+               0, 1),
+       SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
 };
 
 /* Fan / PWM attr common to all models */
-static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
+static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
        SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
        SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
                      show_fan_full_speed,
                      store_fan_full_speed, 0, 0),
        SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0),
-       SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
-       SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
-                     show_fan_full_speed,
-                     store_fan_full_speed, 0, 1),
-       SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
-       SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
-       SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
-                     show_fan_full_speed,
-                     store_fan_full_speed, 0, 2),
-       SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
-
        SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
        SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
                      store_pwm_enable, 0, 0),
        SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
                      show_pwm_interpolate, store_pwm_interpolate, 0, 0),
-       SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
-                     show_pwm_auto_point_channel,
-                     store_pwm_auto_point_channel, 0, 0),
-
+}, {
+       SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
+       SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
+                     show_fan_full_speed,
+                     store_fan_full_speed, 0, 1),
+       SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
        SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
        SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
                      store_pwm_enable, 0, 1),
        SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
                      show_pwm_interpolate, store_pwm_interpolate, 0, 1),
-       SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
-                     show_pwm_auto_point_channel,
-                     store_pwm_auto_point_channel, 0, 1),
-
+}, {
+       SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+       SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
+                     show_fan_full_speed,
+                     store_fan_full_speed, 0, 2),
+       SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
        SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
        SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
                      store_pwm_enable, 0, 2),
        SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
                      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
-       SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
-                     show_pwm_auto_point_channel,
-                     store_pwm_auto_point_channel, 0, 2),
+}, {
+       SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+       SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+                     show_fan_full_speed,
+                     store_fan_full_speed, 0, 3),
+       SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
+       SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
+       SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+                     store_pwm_enable, 0, 3),
+       SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
+                     show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+} };
+
+/* Attr for the third fan of the f71808a, which only has manual pwm */
+static struct sensor_device_attribute_2 f71808a_fan3_attr[] = {
+       SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+       SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
+       SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR,
+                     show_simple_pwm, store_simple_pwm, 0, 2),
 };
 
-/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the
-   f71882fg */
-static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
+/* Attr for models which can beep on Fan alarm */
+static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
        SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
                store_fan_beep, 0, 0),
        SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
                store_fan_beep, 0, 1),
        SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
                store_fan_beep, 0, 2),
+       SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+               store_fan_beep, 0, 3),
+};
 
+/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
+   standard models */
+static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
+       SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 0),
        SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      1, 0),
@@ -434,6 +628,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
        SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
 
+       SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 1),
        SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      1, 1),
@@ -453,6 +650,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
        SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
+       SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 2),
        SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      1, 2),
@@ -473,22 +673,91 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
                      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* Fan / PWM attr for the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
-       SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-               store_fan_beep, 0, 0),
-       SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-               store_fan_beep, 0, 1),
-       SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-               store_fan_beep, 0, 2),
-       SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
-       SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
-                     show_fan_full_speed,
-                     store_fan_full_speed, 0, 3),
-       SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-               store_fan_beep, 0, 3),
-       SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
+/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
+   pwm setting when the temperature is above the pwmX_auto_point1_temp can be
+   programmed instead of being hardcoded to 0xff */
+static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
+       SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 0),
+       SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     0, 0),
+       SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     1, 0),
+       SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     4, 0),
+       SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     0, 0),
+       SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     3, 0),
+       SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp_hyst,
+                     store_pwm_auto_point_temp_hyst,
+                     0, 0),
+       SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
+                     show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+
+       SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 1),
+       SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     0, 1),
+       SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     1, 1),
+       SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     4, 1),
+       SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     0, 1),
+       SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     3, 1),
+       SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp_hyst,
+                     store_pwm_auto_point_temp_hyst,
+                     0, 1),
+       SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
+                     show_pwm_auto_point_temp_hyst, NULL, 3, 1),
+
+       SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 2),
+       SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     0, 2),
+       SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     1, 2),
+       SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+                     4, 2),
+       SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     0, 2),
+       SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+                     3, 2),
+       SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_temp_hyst,
+                     store_pwm_auto_point_temp_hyst,
+                     0, 2),
+       SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
+                     show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
 
+/* PWM attr for the standard models */
+static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
+       SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 0),
        SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 0),
@@ -526,7 +795,10 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
                      show_pwm_auto_point_temp_hyst, NULL, 2, 0),
        SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
+       SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 1),
        SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 1),
@@ -564,7 +836,10 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
                      show_pwm_auto_point_temp_hyst, NULL, 2, 1),
        SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
+       SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 2),
        SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 2),
@@ -602,12 +877,7 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
                      show_pwm_auto_point_temp_hyst, NULL, 2, 2),
        SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-
-       SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
-       SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-                     store_pwm_enable, 0, 3),
-       SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
-                     show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+}, {
        SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_channel,
                      store_pwm_auto_point_channel, 0, 3),
@@ -648,14 +918,20 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
                      show_pwm_auto_point_temp_hyst, NULL, 2, 3),
        SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 3),
-};
+} };
 
-/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm!
-   Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
-   F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+/* Fan attr specific to the f8000 (4th fan input can only measure speed) */
 static struct sensor_device_attribute_2 f8000_fan_attr[] = {
        SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+};
 
+/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
+   Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
+   F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
+       SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 0),
        SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 2),
@@ -694,6 +970,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
        SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 
+       SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 1),
        SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 0),
@@ -732,6 +1011,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
        SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
                      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
 
+       SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+                     show_pwm_auto_point_channel,
+                     store_pwm_auto_point_channel, 0, 2),
        SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR,
                      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
                      0, 1),
@@ -781,21 +1063,27 @@ static inline int superio_inb(int base, int reg)
 static int superio_inw(int base, int reg)
 {
        int val;
-       outb(reg++, base);
-       val = inb(base + 1) << 8;
-       outb(reg, base);
-       val |= inb(base + 1);
+       val  = superio_inb(base, reg) << 8;
+       val |= superio_inb(base, reg + 1);
        return val;
 }
 
-static inline void superio_enter(int base)
+static inline int superio_enter(int base)
 {
+       /* Don't step on other drivers' I/O space by accident */
+       if (!request_muxed_region(base, 2, DRVNAME)) {
+               pr_err("I/O address 0x%04x already in use\n", base);
+               return -EBUSY;
+       }
+
        /* according to the datasheet the key must be send twice! */
-       outb( SIO_UNLOCK_KEY, base);
-       outb( SIO_UNLOCK_KEY, base);
+       outb(SIO_UNLOCK_KEY, base);
+       outb(SIO_UNLOCK_KEY, base);
+
+       return 0;
 }
 
-static inline void superio_select( int base, int ld)
+static inline void superio_select(int base, int ld)
 {
        outb(SIO_REG_LDSEL, base);
        outb(ld, base + 1);
@@ -804,6 +1092,7 @@ static inline void superio_select( int base, int ld)
 static inline void superio_exit(int base)
 {
        outb(SIO_LOCK_KEY, base);
+       release_region(base, 2);
 }
 
 static inline int fan_from_reg(u16 reg)
@@ -830,10 +1119,8 @@ static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg)
 {
        u16 val;
 
-       outb(reg++, data->addr + ADDR_REG_OFFSET);
-       val = inb(data->addr + DATA_REG_OFFSET) << 8;
-       outb(reg, data->addr + ADDR_REG_OFFSET);
-       val |= inb(data->addr + DATA_REG_OFFSET);
+       val  = f71882fg_read8(data, reg) << 8;
+       val |= f71882fg_read8(data, reg + 1);
 
        return val;
 }
@@ -846,26 +1133,31 @@ static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val)
 
 static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
 {
-       outb(reg++, data->addr + ADDR_REG_OFFSET);
-       outb(val >> 8, data->addr + DATA_REG_OFFSET);
-       outb(reg, data->addr + ADDR_REG_OFFSET);
-       outb(val & 255, data->addr + DATA_REG_OFFSET);
+       f71882fg_write8(data, reg,     val >> 8);
+       f71882fg_write8(data, reg + 1, val & 0xff);
+}
+
+static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
+{
+       if (data->type == f71858fg)
+               return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
+       else
+               return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
 }
 
 static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr, reg = 0, reg2;
-       int nr_fans = (data->type == f71882fg) ? 4 : 3;
-       int nr_ins = (data->type == f8000) ? 3 : 9;
-       int temp_start = (data->type == f8000) ? 0 : 1;
+       int nr_fans = f71882fg_nr_fans[data->type];
+       int nr_temps = f71882fg_nr_temps[data->type];
+       int nr, reg, point;
 
        mutex_lock(&data->update_lock);
 
        /* Update once every 60 seconds */
-       if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
+       if (time_after(jiffies, data->last_limits + 60 * HZ) ||
                        !data->valid) {
-               if (data->type == f71882fg) {
+               if (f71882fg_has_in1_alarm[data->type]) {
                        data->in1_max =
                                f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
                        data->in_beep =
@@ -873,7 +1165,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                }
 
                /* Get High & boundary temps*/
-               for (nr = temp_start; nr < 3 + temp_start; nr++) {
+               for (nr = data->temp_start; nr < nr_temps + data->temp_start;
+                                                                       nr++) {
                        data->temp_ovt[nr] = f71882fg_read8(data,
                                                F71882FG_REG_TEMP_OVT(nr));
                        data->temp_high[nr] = f71882fg_read8(data,
@@ -881,28 +1174,26 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                }
 
                if (data->type != f8000) {
-                       data->fan_beep = f71882fg_read8(data,
-                                               F71882FG_REG_FAN_BEEP);
-                       data->temp_beep = f71882fg_read8(data,
-                                               F71882FG_REG_TEMP_BEEP);
                        data->temp_hyst[0] = f71882fg_read8(data,
                                                F71882FG_REG_TEMP_HYST(0));
                        data->temp_hyst[1] = f71882fg_read8(data,
                                                F71882FG_REG_TEMP_HYST(1));
-                       /* Have to hardcode type, because temp1 is special */
+               }
+               /* All but the f71858fg / f8000 have this register */
+               if ((data->type != f71858fg) && (data->type != f8000)) {
                        reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
+                       data->temp_type[1] = (reg & 0x02) ? 2 : 4;
                        data->temp_type[2] = (reg & 0x04) ? 2 : 4;
                        data->temp_type[3] = (reg & 0x08) ? 2 : 4;
                }
-               reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
-               if ((reg2 & 0x03) == 0x01)
-                       data->temp_type[1] = 6 /* PECI */;
-               else if ((reg2 & 0x03) == 0x02)
-                       data->temp_type[1] = 5 /* AMDSI */;
-               else if (data->type != f8000)
-                       data->temp_type[1] = (reg & 0x02) ? 2 : 4;
-               else
-                       data->temp_type[1] = 2; /* F8000 only supports BJT */
+
+               if (f71882fg_fan_has_beep[data->type])
+                       data->fan_beep = f71882fg_read8(data,
+                                               F71882FG_REG_FAN_BEEP);
+
+               if (f71882fg_temp_has_beep[data->type])
+                       data->temp_beep = f71882fg_read8(data,
+                                               F71882FG_REG_TEMP_BEEP);
 
                data->pwm_enable = f71882fg_read8(data,
                                                  F71882FG_REG_PWM_ENABLE);
@@ -916,8 +1207,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                            f71882fg_read8(data,
                                           F71882FG_REG_POINT_MAPPING(nr));
 
-                       if (data->type != f71862fg) {
-                               int point;
+                       switch (data->type) {
+                       default:
                                for (point = 0; point < 5; point++) {
                                        data->pwm_auto_point_pwm[nr][point] =
                                                f71882fg_read8(data,
@@ -930,7 +1221,14 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                                                        F71882FG_REG_POINT_TEMP
                                                        (nr, point));
                                }
-                       } else {
+                               break;
+                       case f71808e:
+                       case f71869:
+                               data->pwm_auto_point_pwm[nr][0] =
+                                       f71882fg_read8(data,
+                                               F71882FG_REG_POINT_PWM(nr, 0));
+                               /* Fall through */
+                       case f71862fg:
                                data->pwm_auto_point_pwm[nr][1] =
                                        f71882fg_read8(data,
                                                F71882FG_REG_POINT_PWM
@@ -947,6 +1245,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                                        f71882fg_read8(data,
                                                F71882FG_REG_POINT_TEMP
                                                (nr, 3));
+                               break;
                        }
                }
                data->last_limits = jiffies;
@@ -958,9 +1257,9 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                                                F71882FG_REG_TEMP_STATUS);
                data->temp_diode_open = f71882fg_read8(data,
                                                F71882FG_REG_TEMP_DIODE_OPEN);
-               for (nr = temp_start; nr < 3 + temp_start; nr++)
-                       data->temp[nr] = f71882fg_read8(data,
-                                               F71882FG_REG_TEMP(nr));
+               for (nr = data->temp_start; nr < nr_temps + data->temp_start;
+                                                                       nr++)
+                       data->temp[nr] = f71882fg_read_temp(data, nr);
 
                data->fan_status = f71882fg_read8(data,
                                                F71882FG_REG_FAN_STATUS);
@@ -975,17 +1274,24 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
                        data->pwm[nr] =
                            f71882fg_read8(data, F71882FG_REG_PWM(nr));
                }
-
-               /* The f8000 can monitor 1 more fan, but has no pwm for it */
+               /* Some models have 1 more fan with limited capabilities */
+               if (data->type == f71808a) {
+                       data->fan[2] = f71882fg_read16(data,
+                                               F71882FG_REG_FAN(2));
+                       data->pwm[2] = f71882fg_read8(data,
+                                                       F71882FG_REG_PWM(2));
+               }
                if (data->type == f8000)
                        data->fan[3] = f71882fg_read16(data,
                                                F71882FG_REG_FAN(3));
-               if (data->type == f71882fg)
+
+               if (f71882fg_has_in1_alarm[data->type])
                        data->in_status = f71882fg_read8(data,
                                                F71882FG_REG_IN_STATUS);
-               for (nr = 0; nr < nr_ins; nr++)
-                       data->in[nr] = f71882fg_read8(data,
-                                               F71882FG_REG_IN(nr));
+               for (nr = 0; nr < F71882FG_MAX_INS; nr++)
+                       if (f71882fg_has_in[data->type][nr])
+                               data->in[nr] = f71882fg_read8(data,
+                                                       F71882FG_REG_IN(nr));
 
                data->last_updated = jiffies;
                data->valid = 1;
@@ -1024,8 +1330,12 @@ static ssize_t store_fan_full_speed(struct device *dev,
                                    const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
 
        val = SENSORS_LIMIT(val, 23, 1500000);
        val = fan_to_reg(val);
@@ -1054,8 +1364,12 @@ static ssize_t store_fan_beep(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       unsigned long val = simple_strtoul(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       unsigned long val;
+
+       err = strict_strtoul(buf, 10, &val);
+       if (err)
+               return err;
 
        mutex_lock(&data->update_lock);
        data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP);
@@ -1103,7 +1417,14 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       long val = simple_strtol(buf, NULL, 10) / 8;
+       int err;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 8;
        val = SENSORS_LIMIT(val, 0, 255);
 
        mutex_lock(&data->update_lock);
@@ -1130,8 +1451,12 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       unsigned long val = simple_strtoul(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       unsigned long val;
+
+       err = strict_strtoul(buf, 10, &val);
+       if (err)
+               return err;
 
        mutex_lock(&data->update_lock);
        data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
@@ -1163,8 +1488,24 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
        struct f71882fg_data *data = f71882fg_update_device(dev);
        int nr = to_sensor_dev_attr_2(devattr)->index;
+       int sign, temp;
+
+       if (data->type == f71858fg) {
+               /* TEMP_TABLE_SEL 1 or 3 ? */
+               if (data->temp_config & 1) {
+                       sign = data->temp[nr] & 0x0001;
+                       temp = (data->temp[nr] >> 5) & 0x7ff;
+               } else {
+                       sign = data->temp[nr] & 0x8000;
+                       temp = (data->temp[nr] >> 5) & 0x3ff;
+               }
+               temp *= 125;
+               if (sign)
+                       temp -= 128000;
+       } else
+               temp = data->temp[nr] * 1000;
 
-       return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+       return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t show_temp_max(struct device *dev, struct device_attribute
@@ -1180,8 +1521,14 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10) / 1000;
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 1000;
        val = SENSORS_LIMIT(val, 0, 255);
 
        mutex_lock(&data->update_lock);
@@ -1214,10 +1561,16 @@ static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10) / 1000;
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
        ssize_t ret = count;
        u8 reg;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 1000;
 
        mutex_lock(&data->update_lock);
 
@@ -1253,8 +1606,14 @@ static ssize_t store_temp_crit(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10) / 1000;
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 1000;
        val = SENSORS_LIMIT(val, 0, 255);
 
        mutex_lock(&data->update_lock);
@@ -1308,8 +1667,12 @@ static ssize_t store_temp_beep(struct device *dev, struct device_attribute
        *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       unsigned long val = simple_strtoul(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       unsigned long val;
+
+       err = strict_strtoul(buf, 10, &val);
+       if (err)
+               return err;
 
        mutex_lock(&data->update_lock);
        data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP);
@@ -1371,8 +1734,13 @@ static ssize_t store_pwm(struct device *dev,
                         size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
        val = SENSORS_LIMIT(val, 0, 255);
 
        mutex_lock(&data->update_lock);
@@ -1402,6 +1770,38 @@ leave:
        return count;
 }
 
+static ssize_t show_simple_pwm(struct device *dev,
+                              struct device_attribute *devattr, char *buf)
+{
+       struct f71882fg_data *data = f71882fg_update_device(dev);
+       int val, nr = to_sensor_dev_attr_2(devattr)->index;
+
+       val = data->pwm[nr];
+       return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_simple_pwm(struct device *dev,
+                               struct device_attribute *devattr,
+                               const char *buf, size_t count)
+{
+       struct f71882fg_data *data = dev_get_drvdata(dev);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val = SENSORS_LIMIT(val, 0, 255);
+
+       mutex_lock(&data->update_lock);
+       f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
+       data->pwm[nr] = val;
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
 static ssize_t show_pwm_enable(struct device *dev,
                               struct device_attribute *devattr, char *buf)
 {
@@ -1432,8 +1832,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
                                *devattr, const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       long val = simple_strtol(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
 
        /* Special case for F8000 pwm channel 3 which only does auto mode */
        if (data->type == f8000 && nr == 2 && val != 2)
@@ -1457,6 +1861,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
        } else {
                switch (val) {
                case 1:
+                       /* The f71858fg does not support manual RPM mode */
+                       if (data->type == f71858fg &&
+                           ((data->pwm_enable >> (2 * nr)) & 1)) {
+                               count = -EINVAL;
+                               goto leave;
+                       }
                        data->pwm_enable |= 2 << (2 * nr);
                        break;          /* Manual */
                case 2:
@@ -1501,9 +1911,14 @@ static ssize_t store_pwm_auto_point_pwm(struct device *dev,
                                        const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int pwm = to_sensor_dev_attr_2(devattr)->index;
+       int err, pwm = to_sensor_dev_attr_2(devattr)->index;
        int point = to_sensor_dev_attr_2(devattr)->nr;
-       long val = simple_strtol(buf, NULL, 10);
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
        val = SENSORS_LIMIT(val, 0, 255);
 
        mutex_lock(&data->update_lock);
@@ -1549,10 +1964,16 @@ static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev,
                                              const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
        int point = to_sensor_dev_attr_2(devattr)->nr;
-       long val = simple_strtol(buf, NULL, 10) / 1000;
        u8 reg;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 1000;
 
        mutex_lock(&data->update_lock);
        data->pwm_auto_point_temp[nr][point] =
@@ -1591,8 +2012,12 @@ static ssize_t store_pwm_interpolate(struct device *dev,
                                     const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       unsigned long val = simple_strtoul(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       unsigned long val;
+
+       err = strict_strtoul(buf, 10, &val);
+       if (err)
+               return err;
 
        mutex_lock(&data->update_lock);
        data->pwm_auto_point_mapping[nr] =
@@ -1615,9 +2040,9 @@ static ssize_t show_pwm_auto_point_channel(struct device *dev,
        int result;
        struct f71882fg_data *data = f71882fg_update_device(dev);
        int nr = to_sensor_dev_attr_2(devattr)->index;
-       int temp_start = (data->type == f8000) ? 0 : 1;
 
-       result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start);
+       result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
+                      data->temp_start);
 
        return sprintf(buf, "%d\n", result);
 }
@@ -1627,9 +2052,12 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
                                            const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int nr = to_sensor_dev_attr_2(devattr)->index;
-       int temp_start = (data->type == f8000) ? 0 : 1;
-       long val = simple_strtol(buf, NULL, 10);
+       int err, nr = to_sensor_dev_attr_2(devattr)->index;
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
 
        switch (val) {
        case 1:
@@ -1644,7 +2072,7 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
        default:
                return -EINVAL;
        }
-       val += temp_start;
+       val += data->temp_start;
        mutex_lock(&data->update_lock);
        data->pwm_auto_point_mapping[nr] =
                f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
@@ -1674,10 +2102,20 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
                                         const char *buf, size_t count)
 {
        struct f71882fg_data *data = dev_get_drvdata(dev);
-       int pwm = to_sensor_dev_attr_2(devattr)->index;
+       int err, pwm = to_sensor_dev_attr_2(devattr)->index;
        int point = to_sensor_dev_attr_2(devattr)->nr;
-       long val = simple_strtol(buf, NULL, 10) / 1000;
-       val = SENSORS_LIMIT(val, 0, 255);
+       long val;
+
+       err = strict_strtol(buf, 10, &val);
+       if (err)
+               return err;
+
+       val /= 1000;
+
+       if (data->auto_point_temp_signed)
+               val = SENSORS_LIMIT(val, -128, 127);
+       else
+               val = SENSORS_LIMIT(val, 0, 127);
 
        mutex_lock(&data->update_lock);
        f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
@@ -1707,12 +2145,23 @@ static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
        return 0;
 }
 
+static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
+       struct sensor_device_attribute_2 *attr, int count)
+{
+       int i;
+
+       for (i = 0; i < count; i++)
+               device_remove_file(&pdev->dev, &attr[i].dev_attr);
+}
+
 static int __devinit f71882fg_probe(struct platform_device *pdev)
 {
        struct f71882fg_data *data;
        struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
-       int err, i, nr_fans = (sio_data->type == f71882fg) ? 4 : 3;
-       u8 start_reg;
+       int nr_fans = f71882fg_nr_fans[sio_data->type];
+       int nr_temps = f71882fg_nr_temps[sio_data->type];
+       int err, i;
+       u8 start_reg, reg;
 
        data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL);
        if (!data)
@@ -1720,6 +2169,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
        data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
        data->type = sio_data->type;
+       data->temp_start =
+           (data->type == f71858fg || data->type == f8000) ? 0 : 1;
        mutex_init(&data->update_lock);
        platform_set_drvdata(pdev, data);
 
@@ -1742,43 +2193,102 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
        if (start_reg & 0x01) {
                switch (data->type) {
-               case f71882fg:
-                       err = f71882fg_create_sysfs_files(pdev,
-                                       f71882fg_in_temp_attr,
-                                       ARRAY_SIZE(f71882fg_in_temp_attr));
-                       if (err)
-                               goto exit_unregister_sysfs;
-                       /* fall through! */
-               case f71862fg:
-                       err = f71882fg_create_sysfs_files(pdev,
-                                       f718x2fg_in_temp_attr,
-                                       ARRAY_SIZE(f718x2fg_in_temp_attr));
+               case f71858fg:
+                       data->temp_config =
+                               f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
+                       if (data->temp_config & 0x10)
+                               /* The f71858fg temperature alarms behave as
+                                  the f8000 alarms in this mode */
+                               err = f71882fg_create_sysfs_files(pdev,
+                                       f8000_temp_attr,
+                                       ARRAY_SIZE(f8000_temp_attr));
+                       else
+                               err = f71882fg_create_sysfs_files(pdev,
+                                       f71858fg_temp_attr,
+                                       ARRAY_SIZE(f71858fg_temp_attr));
                        break;
                case f8000:
                        err = f71882fg_create_sysfs_files(pdev,
-                                       f8000_in_temp_attr,
-                                       ARRAY_SIZE(f8000_in_temp_attr));
+                                       f8000_temp_attr,
+                                       ARRAY_SIZE(f8000_temp_attr));
                        break;
+               default:
+                       err = f71882fg_create_sysfs_files(pdev,
+                               &fxxxx_temp_attr[0][0],
+                               ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
                }
                if (err)
                        goto exit_unregister_sysfs;
+
+               if (f71882fg_temp_has_beep[data->type]) {
+                       err = f71882fg_create_sysfs_files(pdev,
+                                       &fxxxx_temp_beep_attr[0][0],
+                                       ARRAY_SIZE(fxxxx_temp_beep_attr[0])
+                                               * nr_temps);
+                       if (err)
+                               goto exit_unregister_sysfs;
+               }
+
+               for (i = 0; i < F71882FG_MAX_INS; i++) {
+                       if (f71882fg_has_in[data->type][i]) {
+                               err = device_create_file(&pdev->dev,
+                                               &fxxxx_in_attr[i].dev_attr);
+                               if (err)
+                                       goto exit_unregister_sysfs;
+                       }
+               }
+               if (f71882fg_has_in1_alarm[data->type]) {
+                       err = f71882fg_create_sysfs_files(pdev,
+                                       fxxxx_in1_alarm_attr,
+                                       ARRAY_SIZE(fxxxx_in1_alarm_attr));
+                       if (err)
+                               goto exit_unregister_sysfs;
+               }
        }
 
        if (start_reg & 0x02) {
+               switch (data->type) {
+               case f71808e:
+               case f71808a:
+               case f71869:
+               case f71869a:
+                       /* These always have signed auto point temps */
+                       data->auto_point_temp_signed = 1;
+                       /* Fall through to select correct fan/pwm reg bank! */
+               case f71889fg:
+               case f71889ed:
+               case f71889a:
+                       reg = f71882fg_read8(data, F71882FG_REG_FAN_FAULT_T);
+                       if (reg & F71882FG_FAN_NEG_TEMP_EN)
+                               data->auto_point_temp_signed = 1;
+                       /* Ensure banked pwm registers point to right bank */
+                       reg &= ~F71882FG_FAN_PROG_SEL;
+                       f71882fg_write8(data, F71882FG_REG_FAN_FAULT_T, reg);
+                       break;
+               default:
+                       break;
+               }
+
                data->pwm_enable =
                        f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
 
                /* Sanity check the pwm settings */
                switch (data->type) {
+               case f71858fg:
+                       err = 0;
+                       for (i = 0; i < nr_fans; i++)
+                               if (((data->pwm_enable >> (i * 2)) & 3) == 3)
+                                       err = 1;
+                       break;
                case f71862fg:
                        err = (data->pwm_enable & 0x15) != 0x15;
                        break;
-               case f71882fg:
-                       err = 0;
-                       break;
                case f8000:
                        err = data->pwm_enable & 0x20;
                        break;
+               default:
+                       err = 0;
+                       break;
                }
                if (err) {
                        dev_err(&pdev->dev,
@@ -1788,31 +2298,87 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
                        goto exit_unregister_sysfs;
                }
 
-               err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
-                                       ARRAY_SIZE(fxxxx_fan_attr));
+               err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+                               ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
                if (err)
                        goto exit_unregister_sysfs;
 
+               if (f71882fg_fan_has_beep[data->type]) {
+                       err = f71882fg_create_sysfs_files(pdev,
+                                       fxxxx_fan_beep_attr, nr_fans);
+                       if (err)
+                               goto exit_unregister_sysfs;
+               }
+
                switch (data->type) {
+               case f71808e:
+               case f71808a:
+               case f71869:
+               case f71869a:
+               case f71889fg:
+               case f71889ed:
+               case f71889a:
+                       for (i = 0; i < nr_fans; i++) {
+                               data->pwm_auto_point_mapping[i] =
+                                       f71882fg_read8(data,
+                                               F71882FG_REG_POINT_MAPPING(i));
+                               if ((data->pwm_auto_point_mapping[i] & 0x80) ||
+                                   (data->pwm_auto_point_mapping[i] & 3) == 0)
+                                       break;
+                       }
+                       if (i != nr_fans) {
+                               dev_warn(&pdev->dev,
+                                        "Auto pwm controlled by raw digital "
+                                        "data, disabling pwm auto_point "
+                                        "sysfs attributes\n");
+                               goto no_pwm_auto_point;
+                       }
+                       break;
+               default:
+                       break;
+               }
+
+               switch (data->type) {
+               case f71808a:
+                       err = f71882fg_create_sysfs_files(pdev,
+                               &fxxxx_auto_pwm_attr[0][0],
+                               ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+                       if (err)
+                               goto exit_unregister_sysfs;
+                       err = f71882fg_create_sysfs_files(pdev,
+                                       f71808a_fan3_attr,
+                                       ARRAY_SIZE(f71808a_fan3_attr));
+                       break;
                case f71862fg:
                        err = f71882fg_create_sysfs_files(pdev,
-                                       f71862fg_fan_attr,
-                                       ARRAY_SIZE(f71862fg_fan_attr));
+                                       f71862fg_auto_pwm_attr,
+                                       ARRAY_SIZE(f71862fg_auto_pwm_attr));
                        break;
-               case f71882fg:
+               case f71808e:
+               case f71869:
                        err = f71882fg_create_sysfs_files(pdev,
-                                       f71882fg_fan_attr,
-                                       ARRAY_SIZE(f71882fg_fan_attr));
+                                       f71869_auto_pwm_attr,
+                                       ARRAY_SIZE(f71869_auto_pwm_attr));
                        break;
                case f8000:
                        err = f71882fg_create_sysfs_files(pdev,
                                        f8000_fan_attr,
                                        ARRAY_SIZE(f8000_fan_attr));
+                       if (err)
+                               goto exit_unregister_sysfs;
+                       err = f71882fg_create_sysfs_files(pdev,
+                                       f8000_auto_pwm_attr,
+                                       ARRAY_SIZE(f8000_auto_pwm_attr));
                        break;
+               default:
+                       err = f71882fg_create_sysfs_files(pdev,
+                               &fxxxx_auto_pwm_attr[0][0],
+                               ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
                }
                if (err)
                        goto exit_unregister_sysfs;
 
+no_pwm_auto_point:
                for (i = 0; i < nr_fans; i++)
                        dev_info(&pdev->dev, "Fan: %d is in %s mode\n", i + 1,
                                 (data->pwm_enable & (1 << 2 * i)) ?
@@ -1838,34 +2404,103 @@ exit_free:
 
 static int f71882fg_remove(struct platform_device *pdev)
 {
-       int i;
        struct f71882fg_data *data = platform_get_drvdata(pdev);
+       int nr_fans = f71882fg_nr_fans[data->type];
+       int nr_temps = f71882fg_nr_temps[data->type];
+       int i;
+       u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
 
-       platform_set_drvdata(pdev, NULL);
        if (data->hwmon_dev)
                hwmon_device_unregister(data->hwmon_dev);
 
-       /* Note we are not looping over all attr arrays we have as the ones
-          below are supersets of the ones skipped. */
        device_remove_file(&pdev->dev, &dev_attr_name);
 
-       for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++)
-               device_remove_file(&pdev->dev,
-                                       &f718x2fg_in_temp_attr[i].dev_attr);
+       if (start_reg & 0x01) {
+               switch (data->type) {
+               case f71858fg:
+                       if (data->temp_config & 0x10)
+                               f71882fg_remove_sysfs_files(pdev,
+                                       f8000_temp_attr,
+                                       ARRAY_SIZE(f8000_temp_attr));
+                       else
+                               f71882fg_remove_sysfs_files(pdev,
+                                       f71858fg_temp_attr,
+                                       ARRAY_SIZE(f71858fg_temp_attr));
+                       break;
+               case f8000:
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f8000_temp_attr,
+                                       ARRAY_SIZE(f8000_temp_attr));
+                       break;
+               default:
+                       f71882fg_remove_sysfs_files(pdev,
+                               &fxxxx_temp_attr[0][0],
+                               ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
+               }
+               if (f71882fg_temp_has_beep[data->type]) {
+                       f71882fg_remove_sysfs_files(pdev,
+                              &fxxxx_temp_beep_attr[0][0],
+                              ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps);
+               }
 
-       for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
-               device_remove_file(&pdev->dev,
-                                       &f71882fg_in_temp_attr[i].dev_attr);
+               for (i = 0; i < F71882FG_MAX_INS; i++) {
+                       if (f71882fg_has_in[data->type][i]) {
+                               device_remove_file(&pdev->dev,
+                                               &fxxxx_in_attr[i].dev_attr);
+                       }
+               }
+               if (f71882fg_has_in1_alarm[data->type]) {
+                       f71882fg_remove_sysfs_files(pdev,
+                                       fxxxx_in1_alarm_attr,
+                                       ARRAY_SIZE(fxxxx_in1_alarm_attr));
+               }
+       }
 
-       for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
-               device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr);
+       if (start_reg & 0x02) {
+               f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+                               ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
 
-       for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
-               device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
+               if (f71882fg_fan_has_beep[data->type]) {
+                       f71882fg_remove_sysfs_files(pdev,
+                                       fxxxx_fan_beep_attr, nr_fans);
+               }
 
-       for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++)
-               device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr);
+               switch (data->type) {
+               case f71808a:
+                       f71882fg_remove_sysfs_files(pdev,
+                               &fxxxx_auto_pwm_attr[0][0],
+                               ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f71808a_fan3_attr,
+                                       ARRAY_SIZE(f71808a_fan3_attr));
+                       break;
+               case f71862fg:
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f71862fg_auto_pwm_attr,
+                                       ARRAY_SIZE(f71862fg_auto_pwm_attr));
+                       break;
+               case f71808e:
+               case f71869:
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f71869_auto_pwm_attr,
+                                       ARRAY_SIZE(f71869_auto_pwm_attr));
+                       break;
+               case f8000:
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f8000_fan_attr,
+                                       ARRAY_SIZE(f8000_fan_attr));
+                       f71882fg_remove_sysfs_files(pdev,
+                                       f8000_auto_pwm_attr,
+                                       ARRAY_SIZE(f8000_auto_pwm_attr));
+                       break;
+               default:
+                       f71882fg_remove_sysfs_files(pdev,
+                               &fxxxx_auto_pwm_attr[0][0],
+                               ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+               }
+       }
 
+       platform_set_drvdata(pdev, NULL);
        kfree(data);
 
        return 0;
@@ -1874,49 +2509,84 @@ static int f71882fg_remove(struct platform_device *pdev)
 static int __init f71882fg_find(int sioaddr, unsigned short *address,
        struct f71882fg_sio_data *sio_data)
 {
-       int err = -ENODEV;
        u16 devid;
-
-       superio_enter(sioaddr);
+       int err = superio_enter(sioaddr);
+       if (err)
+               return err;
 
        devid = superio_inw(sioaddr, SIO_REG_MANID);
        if (devid != SIO_FINTEK_ID) {
-               pr_debug(DRVNAME ": Not a Fintek device\n");
+               pr_debug("Not a Fintek device\n");
+               err = -ENODEV;
                goto exit;
        }
 
        devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
        switch (devid) {
+       case SIO_F71808E_ID:
+               sio_data->type = f71808e;
+               break;
+       case SIO_F71808A_ID:
+               sio_data->type = f71808a;
+               break;
+       case SIO_F71858_ID:
+               sio_data->type = f71858fg;
+               break;
        case SIO_F71862_ID:
                sio_data->type = f71862fg;
                break;
+       case SIO_F71869_ID:
+               sio_data->type = f71869;
+               break;
+       case SIO_F71869A_ID:
+               sio_data->type = f71869a;
+               break;
        case SIO_F71882_ID:
                sio_data->type = f71882fg;
                break;
+       case SIO_F71889_ID:
+               sio_data->type = f71889fg;
+               break;
+       case SIO_F71889E_ID:
+               sio_data->type = f71889ed;
+               break;
+       case SIO_F71889A_ID:
+               sio_data->type = f71889a;
+               break;
        case SIO_F8000_ID:
                sio_data->type = f8000;
                break;
+       case SIO_F81865_ID:
+               sio_data->type = f81865f;
+               break;
        default:
-               printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
+               pr_info("Unsupported Fintek device: %04x\n",
+                       (unsigned int)devid);
+               err = -ENODEV;
                goto exit;
        }
 
-       superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+       if (sio_data->type == f71858fg)
+               superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+       else
+               superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
        if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-               printk(KERN_WARNING DRVNAME ": Device not activated\n");
+               pr_warn("Device not activated\n");
+               err = -ENODEV;
                goto exit;
        }
 
        *address = superio_inw(sioaddr, SIO_REG_ADDR);
-       if (*address == 0)
-       {
-               printk(KERN_WARNING DRVNAME ": Base address not set\n");
+       if (*address == 0) {
+               pr_warn("Base address not set\n");
+               err = -ENODEV;
                goto exit;
        }
        *address &= ~(REGION_LENGTH - 1);       /* Ignore 3 LSB */
 
        err = 0;
-       printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
+       pr_info("Found %s chip at %#x, revision %d\n",
                f71882fg_names[sio_data->type], (unsigned int)*address,
                (int)superio_inb(sioaddr, SIO_REG_DEVREV));
 exit:
@@ -1945,20 +2615,20 @@ static int __init f71882fg_device_add(unsigned short address,
 
        err = platform_device_add_resources(f71882fg_pdev, &res, 1);
        if (err) {
-               printk(KERN_ERR DRVNAME ": Device resource addition failed\n");
+               pr_err("Device resource addition failed\n");
                goto exit_device_put;
        }
 
        err = platform_device_add_data(f71882fg_pdev, sio_data,
                                       sizeof(struct f71882fg_sio_data));
        if (err) {
-               printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+               pr_err("Platform data allocation failed\n");
                goto exit_device_put;
        }
 
        err = platform_device_add(f71882fg_pdev);
        if (err) {
-               printk(KERN_ERR DRVNAME ": Device addition failed\n");
+               pr_err("Device addition failed\n");
                goto exit_device_put;
        }
 
@@ -2005,7 +2675,7 @@ static void __exit f71882fg_exit(void)
 }
 
 MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");
-MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)");
+MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>");
 MODULE_LICENSE("GPL");
 
 module_init(f71882fg_init);