* alloc_tty_struct() always uses kmalloc() -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/kmod.h>
/* Semaphore to protect creating and releasing a tty. This is shared with
vt.c for deeply disgusting hack reasons */
DEFINE_MUTEX(tty_mutex);
+EXPORT_SYMBOL(tty_mutex);
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
static int tty_fasync(int fd, struct file * filp, int on);
static void release_mem(struct tty_struct *tty, int idx);
+/**
+ * alloc_tty_struct - allocate a tty object
+ *
+ * Return a new empty tty structure. The data fields have not
+ * been initialized in any way but has been zeroed
+ *
+ * Locking: none
+ */
static struct tty_struct *alloc_tty_struct(void)
{
- struct tty_struct *tty;
-
- tty = kmalloc(sizeof(struct tty_struct), GFP_KERNEL);
- if (tty)
- memset(tty, 0, sizeof(struct tty_struct));
- return tty;
+ return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
}
static void tty_buffer_free_all(struct tty_struct *);
+/**
+ * free_tty_struct - free a disused tty
+ * @tty: tty struct to free
+ *
+ * Free the write buffers, tty queue and tty memory itself.
+ *
+ * Locking: none. Must be called after tty is definitely unused
+ */
+
static inline void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
#define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
+/**
+ * tty_name - return tty naming
+ * @tty: tty structure
+ * @buf: buffer for output
+ *
+ * Convert a tty structure into a name. The name reflects the kernel
+ * naming policy and if udev is in use may not reflect user space
+ *
+ * Locking: none
+ */
+
char *tty_name(struct tty_struct *tty, char *buf)
{
if (!tty) /* Hmm. NULL pointer. That's fun. */
* Tty buffer allocation management
*/
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
static void tty_buffer_free_all(struct tty_struct *tty)
{
struct tty_buffer *thead;
kfree(thead);
}
tty->buf.tail = NULL;
+ tty->buf.memory_used = 0;
}
+/**
+ * tty_buffer_init - prepare a tty buffer structure
+ * @tty: tty to initialise
+ *
+ * Set up the initial state of the buffer management for a tty device.
+ * Must be called before the other tty buffer functions are used.
+ *
+ * Locking: none
+ */
+
static void tty_buffer_init(struct tty_struct *tty)
{
spin_lock_init(&tty->buf.lock);
tty->buf.head = NULL;
tty->buf.tail = NULL;
tty->buf.free = NULL;
+ tty->buf.memory_used = 0;
}
-static struct tty_buffer *tty_buffer_alloc(size_t size)
+/**
+ * tty_buffer_alloc - allocate a tty buffer
+ * @tty: tty device
+ * @size: desired size (characters)
+ *
+ * Allocate a new tty buffer to hold the desired number of characters.
+ * Return NULL if out of memory or the allocation would exceed the
+ * per device queue
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
{
- struct tty_buffer *p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ struct tty_buffer *p;
+
+ if (tty->buf.memory_used + size > 65536)
+ return NULL;
+ p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if(p == NULL)
return NULL;
p->used = 0;
p->size = size;
p->next = NULL;
- p->active = 0;
p->commit = 0;
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
-/* printk("Flip create %p\n", p); */
+ tty->buf.memory_used += size;
return p;
}
-/* Must be called with the tty_read lock held. This needs to acquire strategy
- code to decide if we should kfree or relink a given expired buffer */
+/**
+ * tty_buffer_free - free a tty buffer
+ * @tty: tty owning the buffer
+ * @b: the buffer to free
+ *
+ * Free a tty buffer, or add it to the free list according to our
+ * internal strategy
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
{
/* Dumb strategy for now - should keep some stats */
-/* printk("Flip dispose %p\n", b); */
+ tty->buf.memory_used -= b->size;
+ WARN_ON(tty->buf.memory_used < 0);
+
if(b->size >= 512)
kfree(b);
else {
}
}
+/**
+ * tty_buffer_find - find a free tty buffer
+ * @tty: tty owning the buffer
+ * @size: characters wanted
+ *
+ * Locate an existing suitable tty buffer or if we are lacking one then
+ * allocate a new one. We round our buffers off in 256 character chunks
+ * to get better allocation behaviour.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
{
struct tty_buffer **tbh = &tty->buf.free;
t->used = 0;
t->commit = 0;
t->read = 0;
- /* DEBUG ONLY */
-/* memset(t->data, '*', size); */
-/* printk("Flip recycle %p\n", t); */
+ tty->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~ 0xFF;
- return tty_buffer_alloc(size);
+ return tty_buffer_alloc(tty, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
+/**
+ * tty_buffer_request_room - grow tty buffer if needed
+ * @tty: tty structure
+ * @size: size desired
+ *
+ * Make at least size bytes of linear space available for the tty
+ * buffer. If we fail return the size we managed to find.
+ *
+ * Locking: Takes tty->buf.lock
+ */
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
struct tty_buffer *b, *n;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if ((b = tty->buf.tail) != NULL) {
+ if ((b = tty->buf.tail) != NULL)
left = b->size - b->used;
- b->active = 1;
- } else
+ else
left = 0;
if (left < size) {
if ((n = tty_buffer_find(tty, size)) != NULL) {
if (b != NULL) {
b->next = n;
- b->active = 0;
b->commit = b->used;
} else
tty->buf.head = n;
tty->buf.tail = n;
- n->active = 1;
} else
size = left;
}
spin_unlock_irqrestore(&tty->buf.lock, flags);
return size;
}
-
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
-int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size)
+/**
+ * tty_insert_flip_string - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. All the characters
+ * passed are marked as without error. Returns the number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
+ size_t size)
{
int copied = 0;
do {
tb->used += space;
copied += space;
chars += space;
-/* printk("Flip insert %d.\n", space); */
- }
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- while (unlikely(size > copied));
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
return copied;
}
-
EXPORT_SYMBOL(tty_insert_flip_string);
-int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size)
+/**
+ * tty_insert_flip_string_flags - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @flags: flag bytes
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. For each character
+ * the flags array indicates the status of the character. Returns the
+ * number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string_flags(struct tty_struct *tty,
+ const unsigned char *chars, const char *flags, size_t size)
{
int copied = 0;
do {
copied += space;
chars += space;
flags += space;
- }
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- while (unlikely(size > copied));
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
return copied;
}
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+/**
+ * tty_schedule_flip - push characters to ldisc
+ * @tty: tty to push from
+ *
+ * Takes any pending buffers and transfers their ownership to the
+ * ldisc side of the queue. It then schedules those characters for
+ * processing by the line discipline.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+void tty_schedule_flip(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->commit = tty->buf.tail->used;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ schedule_delayed_work(&tty->buf.work, 1);
+}
+EXPORT_SYMBOL(tty_schedule_flip);
-/*
+/**
+ * tty_prepare_flip_string - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @size: desired size
+ *
* Prepare a block of space in the buffer for data. Returns the length
* available and buffer pointer to the space which is now allocated and
* accounted for as ready for normal characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
-/*
+/**
+ * tty_prepare_flip_string_flags - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @flags: return pointer for status flag write area
+ * @size: desired size
+ *
* Prepare a block of space in the buffer for data. Returns the length
* available and buffer pointer to the space which is now allocated and
* accounted for as ready for characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
-/*
+/**
+ * tty_set_termios_ldisc - set ldisc field
+ * @tty: tty structure
+ * @num: line discipline number
+ *
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
* any harm.
+ *
+ * Locking: takes termios_sem
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
- down(&tty->termios_sem);
+ mutex_lock(&tty->termios_mutex);
tty->termios->c_line = num;
- up(&tty->termios_sem);
+ mutex_unlock(&tty->termios_mutex);
}
/*
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */
+/**
+ * tty_register_ldisc - install a line discipline
+ * @disc: ldisc number
+ * @new_ldisc: pointer to the ldisc object
+ *
+ * Installs a new line discipline into the kernel. The discipline
+ * is set up as unreferenced and then made available to the kernel
+ * from this point onwards.
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
{
unsigned long flags;
}
EXPORT_SYMBOL(tty_register_ldisc);
+/**
+ * tty_unregister_ldisc - unload a line discipline
+ * @disc: ldisc number
+ * @new_ldisc: pointer to the ldisc object
+ *
+ * Remove a line discipline from the kernel providing it is not
+ * currently in use.
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
int tty_unregister_ldisc(int disc)
{
unsigned long flags;
}
EXPORT_SYMBOL(tty_unregister_ldisc);
+/**
+ * tty_ldisc_get - take a reference to an ldisc
+ * @disc: ldisc number
+ *
+ * Takes a reference to a line discipline. Deals with refcounts and
+ * module locking counts. Returns NULL if the discipline is not available.
+ * Returns a pointer to the discipline and bumps the ref count if it is
+ * available
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
struct tty_ldisc *tty_ldisc_get(int disc)
{
unsigned long flags;
EXPORT_SYMBOL_GPL(tty_ldisc_get);
+/**
+ * tty_ldisc_put - drop ldisc reference
+ * @disc: ldisc number
+ *
+ * Drop a reference to a line discipline. Manage refcounts and
+ * module usage counts
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
void tty_ldisc_put(int disc)
{
struct tty_ldisc *ld;
EXPORT_SYMBOL_GPL(tty_ldisc_put);
+/**
+ * tty_ldisc_assign - set ldisc on a tty
+ * @tty: tty to assign
+ * @ld: line discipline
+ *
+ * Install an instance of a line discipline into a tty structure. The
+ * ldisc must have a reference count above zero to ensure it remains/
+ * The tty instance refcount starts at zero.
+ *
+ * Locking:
+ * Caller must hold references
+ */
+
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
tty->ldisc = *ld;
* the tty ldisc. Return 0 on failure or 1 on success. This is
* used to implement both the waiting and non waiting versions
* of tty_ldisc_ref
+ *
+ * Locking: takes tty_ldisc_lock
*/
static int tty_ldisc_try(struct tty_struct *tty)
* must also be careful not to hold other locks that will deadlock
* against a discipline change, such as an existing ldisc reference
* (which we check for)
+ *
+ * Locking: call functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
+ *
+ * Locking: called functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
+ *
+ * Locking: takes tty_ldisc_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
*
* Set the discipline of a tty line. Must be called from a process
* context.
+ *
+ * Locking: takes tty_ldisc_lock.
+ * called functions take termios_sem
*/
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
}
clear_bit(TTY_LDISC, &tty->flags);
- clear_bit(TTY_DONT_FLIP, &tty->flags);
- if (o_tty) {
+ if (o_tty)
clear_bit(TTY_LDISC, &o_tty->flags);
- clear_bit(TTY_DONT_FLIP, &o_tty->flags);
- }
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
/*
return retval;
}
-/*
- * This routine returns a tty driver structure, given a device number
+/**
+ * get_tty_driver - find device of a tty
+ * @dev_t: device identifier
+ * @index: returns the index of the tty
+ *
+ * This routine returns a tty driver structure, given a device number
+ * and also passes back the index number.
+ *
+ * Locking: caller must hold tty_mutex
*/
+
static struct tty_driver *get_tty_driver(dev_t device, int *index)
{
struct tty_driver *p;
return NULL;
}
-/*
- * If we try to write to, or set the state of, a terminal and we're
- * not in the foreground, send a SIGTTOU. If the signal is blocked or
- * ignored, go ahead and perform the operation. (POSIX 7.2)
+/**
+ * tty_check_change - check for POSIX terminal changes
+ * @tty: tty to check
+ *
+ * If we try to write to, or set the state of, a terminal and we're
+ * not in the foreground, send a SIGTTOU. If the signal is blocked or
+ * ignored, go ahead and perform the operation. (POSIX 7.2)
+ *
+ * Locking: none
*/
+
int tty_check_change(struct tty_struct * tty)
{
if (current->signal->tty != tty)
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
-static struct file_operations tty_fops = {
+static const struct file_operations tty_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = tty_write,
};
#ifdef CONFIG_UNIX98_PTYS
-static struct file_operations ptmx_fops = {
+static const struct file_operations ptmx_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = tty_write,
};
#endif
-static struct file_operations console_fops = {
+static const struct file_operations console_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = redirected_tty_write,
.fasync = tty_fasync,
};
-static struct file_operations hung_up_tty_fops = {
+static const struct file_operations hung_up_tty_fops = {
.llseek = no_llseek,
.read = hung_up_tty_read,
.write = hung_up_tty_write,
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
-/*
- * This can be called by the "eventd" kernel thread. That is process synchronous,
- * but doesn't hold any locks, so we need to make sure we have the appropriate
- * locks for what we're doing..
+/**
+ * do_tty_hangup - actual handler for hangup events
+ * @work: tty device
+ *
+ * This can be called by the "eventd" kernel thread. That is process
+ * synchronous but doesn't hold any locks, so we need to make sure we
+ * have the appropriate locks for what we're doing.
+ *
+ * The hangup event clears any pending redirections onto the hung up
+ * device. It ensures future writes will error and it does the needed
+ * line discipline hangup and signal delivery. The tty object itself
+ * remains intact.
+ *
+ * Locking:
+ * BKL
+ * redirect lock for undoing redirection
+ * file list lock for manipulating list of ttys
+ * tty_ldisc_lock from called functions
+ * termios_sem resetting termios data
+ * tasklist_lock to walk task list for hangup event
+ *
*/
-static void do_tty_hangup(void *data)
+static void do_tty_hangup(struct work_struct *work)
{
- struct tty_struct *tty = (struct tty_struct *) data;
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, hangup_work);
struct file * cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
{
- down(&tty->termios_sem);
+ mutex_lock(&tty->termios_mutex);
*tty->termios = tty->driver->init_termios;
- up(&tty->termios_sem);
+ mutex_unlock(&tty->termios_mutex);
}
/* Defer ldisc switch */
fput(f);
}
+/**
+ * tty_hangup - trigger a hangup event
+ * @tty: tty to hangup
+ *
+ * A carrier loss (virtual or otherwise) has occurred on this like
+ * schedule a hangup sequence to run after this event.
+ */
+
void tty_hangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
EXPORT_SYMBOL(tty_hangup);
+/**
+ * tty_vhangup - process vhangup
+ * @tty: tty to hangup
+ *
+ * The user has asked via system call for the terminal to be hung up.
+ * We do this synchronously so that when the syscall returns the process
+ * is complete. That guarantee is neccessary for security reasons.
+ */
+
void tty_vhangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
- do_tty_hangup((void *) tty);
+ do_tty_hangup(&tty->hangup_work);
}
EXPORT_SYMBOL(tty_vhangup);
+/**
+ * tty_hung_up_p - was tty hung up
+ * @filp: file pointer of tty
+ *
+ * Return true if the tty has been subject to a vhangup or a carrier
+ * loss
+ */
+
int tty_hung_up_p(struct file * filp)
{
return (filp->f_op == &hung_up_tty_fops);
EXPORT_SYMBOL(tty_hung_up_p);
-/*
- * This function is typically called only by the session leader, when
- * it wants to disassociate itself from its controlling tty.
+/**
+ * disassociate_ctty - disconnect controlling tty
+ * @on_exit: true if exiting so need to "hang up" the session
*
- * It performs the following functions:
+ * This function is typically called only by the session leader, when
+ * it wants to disassociate itself from its controlling tty.
+ *
+ * It performs the following functions:
* (1) Sends a SIGHUP and SIGCONT to the foreground process group
* (2) Clears the tty from being controlling the session
* (3) Clears the controlling tty for all processes in the
* session group.
*
- * The argument on_exit is set to 1 if called when a process is
- * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ * The argument on_exit is set to 1 if called when a process is
+ * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ *
+ * Locking: tty_mutex is taken to protect current->signal->tty
+ * BKL is taken for hysterical raisins
+ * Tasklist lock is taken (under tty_mutex) to walk process
+ * lists for the session.
*/
+
void disassociate_ctty(int on_exit)
{
struct tty_struct *tty;
unlock_kernel();
}
+
+/**
+ * stop_tty - propogate flow control
+ * @tty: tty to stop
+ *
+ * Perform flow control to the driver. For PTY/TTY pairs we
+ * must also propogate the TIOCKPKT status. May be called
+ * on an already stopped device and will not re-call the driver
+ * method.
+ *
+ * This functionality is used by both the line disciplines for
+ * halting incoming flow and by the driver. It may therefore be
+ * called from any context, may be under the tty atomic_write_lock
+ * but not always.
+ *
+ * Locking:
+ * Broken. Relies on BKL which is unsafe here.
+ */
+
void stop_tty(struct tty_struct *tty)
{
if (tty->stopped)
EXPORT_SYMBOL(stop_tty);
+/**
+ * start_tty - propogate flow control
+ * @tty: tty to start
+ *
+ * Start a tty that has been stopped if at all possible. Perform
+ * any neccessary wakeups and propogate the TIOCPKT status. If this
+ * is the tty was previous stopped and is being started then the
+ * driver start method is invoked and the line discipline woken.
+ *
+ * Locking:
+ * Broken. Relies on BKL which is unsafe here.
+ */
+
void start_tty(struct tty_struct *tty)
{
if (!tty->stopped || tty->flow_stopped)
EXPORT_SYMBOL(start_tty);
+/**
+ * tty_read - read method for tty device files
+ * @file: pointer to tty file
+ * @buf: user buffer
+ * @count: size of user buffer
+ * @ppos: unused
+ *
+ * Perform the read system call function on this terminal device. Checks
+ * for hung up devices before calling the line discipline method.
+ *
+ * Locking:
+ * Locks the line discipline internally while needed
+ * For historical reasons the line discipline read method is
+ * invoked under the BKL. This will go away in time so do not rely on it
+ * in new code. Multiple read calls may be outstanding in parallel.
+ */
+
static ssize_t tty_read(struct file * file, char __user * buf, size_t count,
loff_t *ppos)
{
ssize_t ret = 0, written = 0;
unsigned int chunk;
+ /* FIXME: O_NDELAY ... */
if (mutex_lock_interruptible(&tty->atomic_write_lock)) {
return -ERESTARTSYS;
}
* layer has problems with bigger chunks. It will
* claim to be able to handle more characters than
* it actually does.
+ *
+ * FIXME: This can probably go away now except that 64K chunks
+ * are too likely to fail unless switched to vmalloc...
*/
chunk = 2048;
if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
}
+/**
+ * tty_write - write method for tty device file
+ * @file: tty file pointer
+ * @buf: user data to write
+ * @count: bytes to write
+ * @ppos: unused
+ *
+ * Write data to a tty device via the line discipline.
+ *
+ * Locking:
+ * Locks the line discipline as required
+ * Writes to the tty driver are serialized by the atomic_write_lock
+ * and are then processed in chunks to the device. The line discipline
+ * write method will not be involked in parallel for each device
+ * The line discipline write method is called under the big
+ * kernel lock for historical reasons. New code should not rely on this.
+ */
+
static ssize_t tty_write(struct file * file, const char __user * buf, size_t count,
loff_t *ppos)
{
static char ptychar[] = "pqrstuvwxyzabcde";
-static inline void pty_line_name(struct tty_driver *driver, int index, char *p)
+/**
+ * pty_line_name - generate name for a pty
+ * @driver: the tty driver in use
+ * @index: the minor number
+ * @p: output buffer of at least 6 bytes
+ *
+ * Generate a name from a driver reference and write it to the output
+ * buffer.
+ *
+ * Locking: None
+ */
+static void pty_line_name(struct tty_driver *driver, int index, char *p)
{
int i = index + driver->name_base;
/* ->name is initialized to "ttyp", but "tty" is expected */
ptychar[i >> 4 & 0xf], i & 0xf);
}
-static inline void tty_line_name(struct tty_driver *driver, int index, char *p)
+/**
+ * pty_line_name - generate name for a tty
+ * @driver: the tty driver in use
+ * @index: the minor number
+ * @p: output buffer of at least 7 bytes
+ *
+ * Generate a name from a driver reference and write it to the output
+ * buffer.
+ *
+ * Locking: None
+ */
+static void tty_line_name(struct tty_driver *driver, int index, char *p)
{
sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
-/*
+/**
+ * init_dev - initialise a tty device
+ * @driver: tty driver we are opening a device on
+ * @idx: device index
+ * @tty: returned tty structure
+ *
+ * Prepare a tty device. This may not be a "new" clean device but
+ * could also be an active device. The pty drivers require special
+ * handling because of this.
+ *
+ * Locking:
+ * The function is called under the tty_mutex, which
+ * protects us from the tty struct or driver itself going away.
+ *
+ * On exit the tty device has the line discipline attached and
+ * a reference count of 1. If a pair was created for pty/tty use
+ * and the other was a pty master then it too has a reference count of 1.
+ *
* WSH 06/09/97: Rewritten to remove races and properly clean up after a
* failed open. The new code protects the open with a mutex, so it's
* really quite straightforward. The mutex locking can probably be
* relaxed for the (most common) case of reopening a tty.
*/
+
static int init_dev(struct tty_driver *driver, int idx,
struct tty_struct **ret_tty)
{
struct tty_struct *tty, *o_tty;
struct termios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
- int retval=0;
+ int retval = 0;
/* check whether we're reopening an existing tty */
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
/* call the tty release_mem routine to clean out this slot */
release_mem_out:
- printk(KERN_INFO "init_dev: ldisc open failed, "
- "clearing slot %d\n", idx);
+ if (printk_ratelimit())
+ printk(KERN_INFO "init_dev: ldisc open failed, "
+ "clearing slot %d\n", idx);
release_mem(tty, idx);
goto end_init;
}
-/*
- * Releases memory associated with a tty structure, and clears out the
- * driver table slots.
+/**
+ * release_mem - release tty structure memory
+ *
+ * Releases memory associated with a tty structure, and clears out the
+ * driver table slots. This function is called when a device is no longer
+ * in use. It also gets called when setup of a device fails.
+ *
+ * Locking:
+ * tty_mutex - sometimes only
+ * takes the file list lock internally when working on the list
+ * of ttys that the driver keeps.
+ * FIXME: should we require tty_mutex is held here ??
*/
+
static void release_mem(struct tty_struct *tty, int idx)
{
struct tty_struct *o_tty;
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
- int devpts_master, devpts;
+ int devpts;
int idx;
char buf[64];
unsigned long flags;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
- devpts_master = pty_master && devpts;
o_tty = tty->link;
#ifdef TTY_PARANOIA_CHECK
* race with the set_ldisc code path.
*/
clear_bit(TTY_LDISC, &tty->flags);
- clear_bit(TTY_DONT_FLIP, &tty->flags);
cancel_delayed_work(&tty->buf.work);
/*
}
-/*
- * tty_open and tty_release keep up the tty count that contains the
- * number of opens done on a tty. We cannot use the inode-count, as
- * different inodes might point to the same tty.
+/**
+ * tty_open - open a tty device
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * tty_open and tty_release keep up the tty count that contains the
+ * number of opens done on a tty. We cannot use the inode-count, as
+ * different inodes might point to the same tty.
+ *
+ * Open-counting is needed for pty masters, as well as for keeping
+ * track of serial lines: DTR is dropped when the last close happens.
+ * (This is not done solely through tty->count, now. - Ted 1/27/92)
*
- * Open-counting is needed for pty masters, as well as for keeping
- * track of serial lines: DTR is dropped when the last close happens.
- * (This is not done solely through tty->count, now. - Ted 1/27/92)
+ * The termios state of a pty is reset on first open so that
+ * settings don't persist across reuse.
*
- * The termios state of a pty is reset on first open so that
- * settings don't persist across reuse.
+ * Locking: tty_mutex protects current->signal->tty, get_tty_driver and
+ * init_dev work. tty->count should protect the rest.
+ * task_lock is held to update task details for sessions
*/
+
static int tty_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
}
#ifdef CONFIG_UNIX98_PTYS
+/**
+ * ptmx_open - open a unix 98 pty master
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * Allocate a unix98 pty master device from the ptmx driver.
+ *
+ * Locking: tty_mutex protects theinit_dev work. tty->count should
+ protect the rest.
+ * allocated_ptys_lock handles the list of free pty numbers
+ */
+
static int ptmx_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
return 0;
out1:
release_dev(filp);
+ return retval;
out:
down(&allocated_ptys_lock);
idr_remove(&allocated_ptys, index);
}
#endif
+/**
+ * tty_release - vfs callback for close
+ * @inode: inode of tty
+ * @filp: file pointer for handle to tty
+ *
+ * Called the last time each file handle is closed that references
+ * this tty. There may however be several such references.
+ *
+ * Locking:
+ * Takes bkl. See release_dev
+ */
+
static int tty_release(struct inode * inode, struct file * filp)
{
lock_kernel();
return 0;
}
-/* No kernel lock held - fine */
+/**
+ * tty_poll - check tty status
+ * @filp: file being polled
+ * @wait: poll wait structures to update
+ *
+ * Call the line discipline polling method to obtain the poll
+ * status of the device.
+ *
+ * Locking: locks called line discipline but ldisc poll method
+ * may be re-entered freely by other callers.
+ */
+
static unsigned int tty_poll(struct file * filp, poll_table * wait)
{
struct tty_struct * tty;
return 0;
}
+/**
+ * tiocsti - fake input character
+ * @tty: tty to fake input into
+ * @p: pointer to character
+ *
+ * Fake input to a tty device. Does the neccessary locking and
+ * input management.
+ *
+ * FIXME: does not honour flow control ??
+ *
+ * Locking:
+ * Called functions take tty_ldisc_lock
+ * current->signal->tty check is safe without locks
+ *
+ * FIXME: may race normal receive processing
+ */
+
static int tiocsti(struct tty_struct *tty, char __user *p)
{
char ch, mbz = 0;
return 0;
}
+/**
+ * tiocgwinsz - implement window query ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the kernel idea of the window size into the user buffer.
+ *
+ * Locking: tty->termios_sem is taken to ensure the winsize data
+ * is consistent.
+ */
+
static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg)
{
- if (copy_to_user(arg, &tty->winsize, sizeof(*arg)))
- return -EFAULT;
- return 0;
+ int err;
+
+ mutex_lock(&tty->termios_mutex);
+ err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
+ mutex_unlock(&tty->termios_mutex);
+
+ return err ? -EFAULT: 0;
}
+/**
+ * tiocswinsz - implement window size set ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the user idea of the window size to the kernel. Traditionally
+ * this is just advisory information but for the Linux console it
+ * actually has driver level meaning and triggers a VC resize.
+ *
+ * Locking:
+ * Called function use the console_sem is used to ensure we do
+ * not try and resize the console twice at once.
+ * The tty->termios_sem is used to ensure we don't double
+ * resize and get confused. Lock order - tty->termios.sem before
+ * console sem
+ */
+
static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize __user * arg)
{
if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
return -EFAULT;
+
+ mutex_lock(&tty->termios_mutex);
if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
- return 0;
+ goto done;
+
#ifdef CONFIG_VT
if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
- int rc;
-
- acquire_console_sem();
- rc = vc_resize(tty->driver_data, tmp_ws.ws_col, tmp_ws.ws_row);
- release_console_sem();
- if (rc)
- return -ENXIO;
+ if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
+ tmp_ws.ws_row)) {
+ mutex_unlock(&tty->termios_mutex);
+ return -ENXIO;
+ }
}
#endif
if (tty->pgrp > 0)
kill_pg(real_tty->pgrp, SIGWINCH, 1);
tty->winsize = tmp_ws;
real_tty->winsize = tmp_ws;
+done:
+ mutex_unlock(&tty->termios_mutex);
return 0;
}
+/**
+ * tioccons - allow admin to move logical console
+ * @file: the file to become console
+ *
+ * Allow the adminstrator to move the redirected console device
+ *
+ * Locking: uses redirect_lock to guard the redirect information
+ */
+
static int tioccons(struct file *file)
{
if (!capable(CAP_SYS_ADMIN))
return 0;
}
+/**
+ * fionbio - non blocking ioctl
+ * @file: file to set blocking value
+ * @p: user parameter
+ *
+ * Historical tty interfaces had a blocking control ioctl before
+ * the generic functionality existed. This piece of history is preserved
+ * in the expected tty API of posix OS's.
+ *
+ * Locking: none, the open fle handle ensures it won't go away.
+ */
static int fionbio(struct file *file, int __user *p)
{
return 0;
}
+/**
+ * tiocsctty - set controlling tty
+ * @tty: tty structure
+ * @arg: user argument
+ *
+ * This ioctl is used to manage job control. It permits a session
+ * leader to set this tty as the controlling tty for the session.
+ *
+ * Locking:
+ * Takes tasklist lock internally to walk sessions
+ * Takes task_lock() when updating signal->tty
+ * Takes tty_mutex() to protect tty instance
+ *
+ */
+
static int tiocsctty(struct tty_struct *tty, int arg)
{
- task_t *p;
+ struct task_struct *p;
if (current->signal->leader &&
(current->signal->session == tty->session))
} else
return -EPERM;
}
+ mutex_lock(&tty_mutex);
task_lock(current);
current->signal->tty = tty;
task_unlock(current);
+ mutex_unlock(&tty_mutex);
current->signal->tty_old_pgrp = 0;
tty->session = current->signal->session;
tty->pgrp = process_group(current);
return 0;
}
+/**
+ * tiocgpgrp - get process group
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @p: returned pid
+ *
+ * Obtain the process group of the tty. If there is no process group
+ * return an error.
+ *
+ * Locking: none. Reference to ->signal->tty is safe.
+ */
+
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
return put_user(real_tty->pgrp, p);
}
+/**
+ * tiocspgrp - attempt to set process group
+ * @tty: tty passed by user
+ * @real_tty: tty side device matching tty passed by user
+ * @p: pid pointer
+ *
+ * Set the process group of the tty to the session passed. Only
+ * permitted where the tty session is our session.
+ *
+ * Locking: None
+ */
+
static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
pid_t pgrp;
return 0;
}
+/**
+ * tiocgsid - get session id
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @p: pointer to returned session id
+ *
+ * Obtain the session id of the tty. If there is no session
+ * return an error.
+ *
+ * Locking: none. Reference to ->signal->tty is safe.
+ */
+
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
return put_user(real_tty->session, p);
}
+/**
+ * tiocsetd - set line discipline
+ * @tty: tty device
+ * @p: pointer to user data
+ *
+ * Set the line discipline according to user request.
+ *
+ * Locking: see tty_set_ldisc, this function is just a helper
+ */
+
static int tiocsetd(struct tty_struct *tty, int __user *p)
{
int ldisc;
return tty_set_ldisc(tty, ldisc);
}
+/**
+ * send_break - performed time break
+ * @tty: device to break on
+ * @duration: timeout in mS
+ *
+ * Perform a timed break on hardware that lacks its own driver level
+ * timed break functionality.
+ *
+ * Locking:
+ * atomic_write_lock serializes
+ *
+ */
+
static int send_break(struct tty_struct *tty, unsigned int duration)
{
+ if (mutex_lock_interruptible(&tty->atomic_write_lock))
+ return -EINTR;
tty->driver->break_ctl(tty, -1);
if (!signal_pending(current)) {
msleep_interruptible(duration);
}
tty->driver->break_ctl(tty, 0);
+ mutex_unlock(&tty->atomic_write_lock);
if (signal_pending(current))
return -EINTR;
return 0;
}
-static int
-tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
+/**
+ * tiocmget - get modem status
+ * @tty: tty device
+ * @file: user file pointer
+ * @p: pointer to result
+ *
+ * Obtain the modem status bits from the tty driver if the feature
+ * is supported. Return -EINVAL if it is not available.
+ *
+ * Locking: none (up to the driver)
+ */
+
+static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
{
int retval = -EINVAL;
return retval;
}
-static int
-tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+/**
+ * tiocmset - set modem status
+ * @tty: tty device
+ * @file: user file pointer
+ * @cmd: command - clear bits, set bits or set all
+ * @p: pointer to desired bits
+ *
+ * Set the modem status bits from the tty driver if the feature
+ * is supported. Return -EINVAL if it is not available.
+ *
+ * Locking: none (up to the driver)
+ */
+
+static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
unsigned __user *p)
{
int retval = -EINVAL;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
+ /* CHECKME: is this safe as one end closes ? */
+
real_tty = tty;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNOTTY:
+ /* FIXME: taks lock or tty_mutex ? */
if (current->signal->tty != tty)
return -ENOTTY;
if (current->signal->leader)
tty->driver->break_ctl(tty, 0);
return 0;
case TCSBRK: /* SVID version: non-zero arg --> no break */
- /*
- * XXX is the above comment correct, or the
- * code below correct? Is this ioctl used at
- * all by anyone?
+ /* non-zero arg means wait for all output data
+ * to be sent (performed above) but don't send break.
+ * This is used by the tcdrain() termios function.
*/
if (!arg)
return send_break(tty, 250);
* Nasty bug: do_SAK is being called in interrupt context. This can
* deadlock. We punt it up to process context. AKPM - 16Mar2001
*/
-static void __do_SAK(void *arg)
+static void __do_SAK(struct work_struct *work)
{
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, SAK_work);
#ifdef TTY_SOFT_SAK
tty_hangup(tty);
#else
- struct tty_struct *tty = arg;
struct task_struct *g, *p;
int session;
int i;
}
task_lock(p);
if (p->files) {
- rcu_read_lock();
+ /*
+ * We don't take a ref to the file, so we must
+ * hold ->file_lock instead.
+ */
+ spin_lock(&p->files->file_lock);
fdt = files_fdtable(p->files);
for (i=0; i < fdt->max_fds; i++) {
filp = fcheck_files(p->files, i);
printk(KERN_NOTICE "SAK: killed process %d"
" (%s): fd#%d opened to the tty\n",
p->pid, p->comm, i);
- send_sig(SIGKILL, p, 1);
+ force_sig(SIGKILL, p);
break;
}
}
- rcu_read_unlock();
+ spin_unlock(&p->files->file_lock);
}
task_unlock(p);
} while_each_thread(g, p);
{
if (!tty)
return;
- PREPARE_WORK(&tty->SAK_work, __do_SAK, tty);
+ PREPARE_WORK(&tty->SAK_work, __do_SAK);
schedule_work(&tty->SAK_work);
}
EXPORT_SYMBOL(do_SAK);
-/*
- * This routine is called out of the software interrupt to flush data
- * from the buffer chain to the line discipline.
+/**
+ * flush_to_ldisc
+ * @work: tty structure passed from work queue.
+ *
+ * This routine is called out of the software interrupt to flush data
+ * from the buffer chain to the line discipline.
+ *
+ * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
+ * while invoking the line discipline receive_buf method. The
+ * receive_buf method is single threaded for each tty instance.
*/
-static void flush_to_ldisc(void *private_)
+static void flush_to_ldisc(struct work_struct *work)
{
- struct tty_struct *tty = (struct tty_struct *) private_;
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, buf.work.work);
unsigned long flags;
struct tty_ldisc *disc;
- struct tty_buffer *tbuf;
- int count;
+ struct tty_buffer *tbuf, *head;
char *char_buf;
unsigned char *flag_buf;
if (disc == NULL) /* !TTY_LDISC */
return;
- if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
- /*
- * Do it after the next timer tick:
- */
- schedule_delayed_work(&tty->buf.work, 1);
- goto out;
- }
spin_lock_irqsave(&tty->buf.lock, flags);
- while((tbuf = tty->buf.head) != NULL) {
- while ((count = tbuf->commit - tbuf->read) != 0) {
- char_buf = tbuf->char_buf_ptr + tbuf->read;
- flag_buf = tbuf->flag_buf_ptr + tbuf->read;
- tbuf->read += count;
+ head = tty->buf.head;
+ if (head != NULL) {
+ tty->buf.head = NULL;
+ for (;;) {
+ int count = head->commit - head->read;
+ if (!count) {
+ if (head->next == NULL)
+ break;
+ tbuf = head;
+ head = head->next;
+ tty_buffer_free(tty, tbuf);
+ continue;
+ }
+ if (!tty->receive_room) {
+ schedule_delayed_work(&tty->buf.work, 1);
+ break;
+ }
+ if (count > tty->receive_room)
+ count = tty->receive_room;
+ char_buf = head->char_buf_ptr + head->read;
+ flag_buf = head->flag_buf_ptr + head->read;
+ head->read += count;
spin_unlock_irqrestore(&tty->buf.lock, flags);
disc->receive_buf(tty, char_buf, flag_buf, count);
spin_lock_irqsave(&tty->buf.lock, flags);
}
- if (tbuf->active)
- break;
- tty->buf.head = tbuf->next;
- if (tty->buf.head == NULL)
- tty->buf.tail = NULL;
- tty_buffer_free(tty, tbuf);
+ tty->buf.head = head;
}
spin_unlock_irqrestore(&tty->buf.lock, flags);
-out:
+
tty_ldisc_deref(disc);
}
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data.
+ *
+ * Locking: none
*/
int tty_termios_baud_rate(struct termios *termios)
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
+ *
+ * Locking: none
*/
int tty_get_baud_rate(struct tty_struct *tty)
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
+ *
+ * Locking: tty buffer lock. Driver locks in low latency mode.
*/
void tty_flip_buffer_push(struct tty_struct *tty)
{
unsigned long flags;
spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL) {
- tty->buf.tail->active = 0;
+ if (tty->buf.tail != NULL)
tty->buf.tail->commit = tty->buf.tail->used;
- }
spin_unlock_irqrestore(&tty->buf.lock, flags);
if (tty->low_latency)
- flush_to_ldisc((void *) tty);
+ flush_to_ldisc(&tty->buf.work.work);
else
schedule_delayed_work(&tty->buf.work, 1);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
-/*
- * This subroutine initializes a tty structure.
+/**
+ * initialize_tty_struct
+ * @tty: tty to initialize
+ *
+ * This subroutine initializes a tty structure that has been newly
+ * allocated.
+ *
+ * Locking: none - tty in question must not be exposed at this point
*/
+
static void initialize_tty_struct(struct tty_struct *tty)
{
memset(tty, 0, sizeof(struct tty_struct));
tty->overrun_time = jiffies;
tty->buf.head = tty->buf.tail = NULL;
tty_buffer_init(tty);
- INIT_WORK(&tty->buf.work, flush_to_ldisc, tty);
+ INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
init_MUTEX(&tty->buf.pty_sem);
- init_MUTEX(&tty->termios_sem);
+ mutex_init(&tty->termios_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
- INIT_WORK(&tty->hangup_work, do_tty_hangup, tty);
+ INIT_WORK(&tty->hangup_work, do_tty_hangup);
mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
spin_lock_init(&tty->read_lock);
INIT_LIST_HEAD(&tty->tty_files);
- INIT_WORK(&tty->SAK_work, NULL, NULL);
+ INIT_WORK(&tty->SAK_work, NULL);
}
/*
* The default put_char routine if the driver did not define one.
*/
+
static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
{
tty->driver->write(tty, &ch, 1);
static struct class *tty_class;
/**
- * tty_register_device - register a tty device
- * @driver: the tty driver that describes the tty device
- * @index: the index in the tty driver for this tty device
- * @device: a struct device that is associated with this tty device.
- * This field is optional, if there is no known struct device for this
- * tty device it can be set to NULL safely.
+ * tty_register_device - register a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
+ * @device: a struct device that is associated with this tty device.
+ * This field is optional, if there is no known struct device
+ * for this tty device it can be set to NULL safely.
+ *
+ * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error).
*
- * This call is required to be made to register an individual tty device if
- * the tty driver's flags have the TTY_DRIVER_NO_DEVFS bit set. If that
- * bit is not set, this function should not be called.
+ * This call is required to be made to register an individual tty device
+ * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
+ * that bit is not set, this function should not be called by a tty
+ * driver.
+ *
+ * Locking: ??
*/
-void tty_register_device(struct tty_driver *driver, unsigned index,
- struct device *device)
+
+struct class_device *tty_register_device(struct tty_driver *driver,
+ unsigned index, struct device *device)
{
char name[64];
dev_t dev = MKDEV(driver->major, driver->minor_start) + index;
if (index >= driver->num) {
printk(KERN_ERR "Attempt to register invalid tty line number "
" (%d).\n", index);
- return;
+ return ERR_PTR(-EINVAL);
}
- devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR,
- "%s%d", driver->devfs_name, index + driver->name_base);
-
if (driver->type == TTY_DRIVER_TYPE_PTY)
pty_line_name(driver, index, name);
else
tty_line_name(driver, index, name);
- class_device_create(tty_class, NULL, dev, device, "%s", name);
+
+ return class_device_create(tty_class, NULL, dev, device, "%s", name);
}
/**
- * tty_unregister_device - unregister a tty device
- * @driver: the tty driver that describes the tty device
- * @index: the index in the tty driver for this tty device
+ * tty_unregister_device - unregister a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
*
- * If a tty device is registered with a call to tty_register_device() then
- * this function must be made when the tty device is gone.
+ * If a tty device is registered with a call to tty_register_device() then
+ * this function must be called when the tty device is gone.
+ *
+ * Locking: ??
*/
+
void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
- devfs_remove("%s%d", driver->devfs_name, index + driver->name_base);
class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index);
}
kfree(driver);
}
-void tty_set_operations(struct tty_driver *driver, struct tty_operations *op)
+void tty_set_operations(struct tty_driver *driver,
+ const struct tty_operations *op)
{
driver->open = op->open;
driver->close = op->close;
driver->cdev.owner = driver->owner;
error = cdev_add(&driver->cdev, dev, driver->num);
if (error) {
- cdev_del(&driver->cdev);
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
driver->termios = driver->termios_locked = NULL;
list_add(&driver->tty_drivers, &tty_drivers);
- if ( !(driver->flags & TTY_DRIVER_NO_DEVFS) ) {
+ if ( !(driver->flags & TTY_DRIVER_DYNAMIC_DEV) ) {
for(i = 0; i < driver->num; i++)
tty_register_device(driver, i, NULL);
}
driver->termios_locked[i] = NULL;
kfree(tp);
}
- if (!(driver->flags & TTY_DRIVER_NO_DEVFS))
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
tty_unregister_device(driver, i);
}
p = driver->ttys;
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
- devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty");
class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
- devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console");
class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
#ifdef CONFIG_UNIX98_PTYS
if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
- devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx");
class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif
if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
- devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0");
class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
vty_init();
Code Review / linux-2.6.git / blobdiff