pata_sis: add mode_filter method for certain sis5513 chipsets
[linux-2.6.git] / drivers / ata / pata_pdc202xx_old.c
index ad691b9..c2ed586 100644 (file)
@@ -1,7 +1,8 @@
 /*
  * pata_pdc202xx_old.c         - Promise PDC202xx PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
- *                       Alan Cox <alan@redhat.com>
+ *                       Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *                       (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
  *
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.4.3"
 
-/**
- *     pdc2024x_pre_reset              -       probe begin
- *     @ap: ATA port
- *
- *     Set up cable type and use generic probe init
- */
-
-static int pdc2024x_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-
-static void pdc2024x_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-static int pdc2026x_pre_reset(struct ata_port *ap)
+static int pdc2026x_cable_detect(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u16 cis;
 
        pci_read_config_word(pdev, 0x50, &cis);
        if (cis & (1 << (10 + ap->port_no)))
-               ap->cbl = ATA_CBL_PATA80;
-       else
-               ap->cbl = ATA_CBL_PATA40;
+               return ATA_CBL_PATA40;
+       return ATA_CBL_PATA80;
+}
 
-       return ata_std_prereset(ap);
+static void pdc202xx_exec_command(struct ata_port *ap,
+                                 const struct ata_taskfile *tf)
+{
+       DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+       iowrite8(tf->command, ap->ioaddr.command_addr);
+       ndelay(400);
 }
 
-static void pdc2026x_error_handler(struct ata_port *ap)
+static bool pdc202xx_irq_check(struct ata_port *ap)
 {
-       ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+       struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
+       unsigned long master    = pci_resource_start(pdev, 4);
+       u8 sc1d                 = inb(master + 0x1d);
+
+       if (ap->port_no) {
+               /*
+                * bit 7: error, bit 6: interrupting,
+                * bit 5: FIFO full, bit 4: FIFO empty
+                */
+               return sc1d & 0x40;
+       } else  {
+               /*
+                * bit 3: error, bit 2: interrupting,
+                * bit 1: FIFO full, bit 0: FIFO empty
+                */
+               return sc1d & 0x04;
+       }
 }
 
 /**
@@ -76,7 +79,7 @@ static void pdc2026x_error_handler(struct ata_port *ap)
 static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+       int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
        static u16 pio_timing[5] = {
                0x0913, 0x050C , 0x0308, 0x0206, 0x0104
        };
@@ -85,7 +88,7 @@ static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *a
        pci_read_config_byte(pdev, port, &r_ap);
        pci_read_config_byte(pdev, port + 1, &r_bp);
        r_ap &= ~0x3F;  /* Preserve ERRDY_EN, SYNC_IN */
-       r_bp &= ~0x07;
+       r_bp &= ~0x1F;
        r_ap |= (pio_timing[pio] >> 8);
        r_bp |= (pio_timing[pio] & 0xFF);
 
@@ -123,7 +126,7 @@ static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+       int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
        static u8 udma_timing[6][2] = {
                { 0x60, 0x03 }, /* 33 Mhz Clock */
                { 0x40, 0x02 },
@@ -132,12 +135,17 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
                { 0x20, 0x01 },
                { 0x20, 0x01 }
        };
+       static u8 mdma_timing[3][2] = {
+               { 0xe0, 0x0f },
+               { 0x60, 0x04 },
+               { 0x60, 0x03 },
+       };
        u8 r_bp, r_cp;
 
        pci_read_config_byte(pdev, port + 1, &r_bp);
        pci_read_config_byte(pdev, port + 2, &r_cp);
 
-       r_bp &= ~0xF0;
+       r_bp &= ~0xE0;
        r_cp &= ~0x0F;
 
        if (adev->dma_mode >= XFER_UDMA_0) {
@@ -147,8 +155,8 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
        } else {
                int speed = adev->dma_mode - XFER_MW_DMA_0;
-               r_bp |= 0x60;
-               r_cp |= (5 - speed);
+               r_bp |= mdma_timing[speed][0];
+               r_cp |= mdma_timing[speed][1];
        }
        pci_write_config_byte(pdev, port + 1, r_bp);
        pci_write_config_byte(pdev, port + 2, r_cp);
@@ -161,6 +169,9 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *     In UDMA3 or higher we have to clock switch for the duration of the
  *     DMA transfer sequence.
+ *
+ *     Note: The host lock held by the libata layer protects
+ *     us from two channels both trying to set DMA bits at once
  */
 
 static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
@@ -170,36 +181,32 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
        struct ata_taskfile *tf = &qc->tf;
        int sel66 = ap->port_no ? 0x08: 0x02;
 
-       unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
-       unsigned long clock = master + 0x11;
-       unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
+       void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
+       void __iomem *clock = master + 0x11;
+       void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
 
        u32 len;
 
        /* Check we keep host level locking here */
-       if (adev->dma_mode >= XFER_UDMA_2)
-               outb(inb(clock) | sel66, clock);
+       if (adev->dma_mode > XFER_UDMA_2)
+               iowrite8(ioread8(clock) | sel66, clock);
        else
-               outb(inb(clock) & ~sel66, clock);
+               iowrite8(ioread8(clock) & ~sel66, clock);
 
        /* The DMA clocks may have been trashed by a reset. FIXME: make conditional
           and move to qc_issue ? */
        pdc202xx_set_dmamode(ap, qc->dev);
 
        /* Cases the state machine will not complete correctly without help */
-       if ((tf->flags & ATA_TFLAG_LBA48) ||  tf->protocol == ATA_PROT_ATAPI_DMA)
-       {
-               if (tf->flags & ATA_TFLAG_LBA48)
-                       len = qc->nsect * 512;
-               else
-                       len = qc->nbytes;
+       if ((tf->flags & ATA_TFLAG_LBA48) ||  tf->protocol == ATAPI_PROT_DMA) {
+               len = qc->nbytes / 2;
 
                if (tf->flags & ATA_TFLAG_WRITE)
                        len |= 0x06000000;
                else
                        len |= 0x05000000;
 
-               outl(len, atapi_reg);
+               iowrite32(len, atapi_reg);
        }
 
        /* Activate DMA */
@@ -212,6 +219,9 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
  *
  *     After a DMA completes we need to put the clock back to 33MHz for
  *     PIO timings.
+ *
+ *     Note: The host lock held by the libata layer protects
+ *     us from two channels both trying to set DMA bits at once
  */
 
 static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
@@ -222,26 +232,24 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 
        int sel66 = ap->port_no ? 0x08: 0x02;
        /* The clock bits are in the same register for both channels */
-       unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
-       unsigned long clock = master + 0x11;
-       unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
+       void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
+       void __iomem *clock = master + 0x11;
+       void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
 
        /* Cases the state machine will not complete correctly */
-       if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
-               outl(0, atapi_reg);
-               outb(inb(clock) & ~sel66, clock);
+       if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) {
+               iowrite32(0, atapi_reg);
+               iowrite8(ioread8(clock) & ~sel66, clock);
        }
-       /* Check we keep host level locking here */
        /* Flip back to 33Mhz for PIO */
-       if (adev->dma_mode >= XFER_UDMA_2)
-               outb(inb(clock) & ~sel66, clock);
-
+       if (adev->dma_mode > XFER_UDMA_2)
+               iowrite8(ioread8(clock) & ~sel66, clock);
        ata_bmdma_stop(qc);
+       pdc202xx_set_piomode(ap, adev);
 }
 
 /**
  *     pdc2026x_dev_config     -       device setup hook
- *     @ap: ATA port
  *     @adev: newly found device
  *
  *     Perform chip specific early setup. We need to lock the transfer
@@ -249,142 +257,110 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
  *     barf.
  */
 
-static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void pdc2026x_dev_config(struct ata_device *adev)
 {
        adev->max_sectors = 256;
 }
 
+static int pdc2026x_port_start(struct ata_port *ap)
+{
+       void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+       if (bmdma) {
+               /* Enable burst mode */
+               u8 burst = ioread8(bmdma + 0x1f);
+               iowrite8(burst | 0x01, bmdma + 0x1f);
+       }
+       return ata_bmdma_port_start(ap);
+}
+
+/**
+ *     pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
+ *     @qc: Metadata associated with taskfile to check
+ *
+ *     Just say no - not supported on older Promise.
+ *
+ *     LOCKING:
+ *     None (inherited from caller).
+ *
+ *     RETURNS: 0 when ATAPI DMA can be used
+ *              1 otherwise
+ */
+
+static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+       return 1;
+}
+
 static struct scsi_host_template pdc202xx_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
-       .resume                 = ata_scsi_device_resume,
-       .suspend                = ata_scsi_device_suspend,
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations pdc2024x_port_ops = {
-       .port_disable   = ata_port_disable,
-       .set_piomode    = pdc202xx_set_piomode,
-       .set_dmamode    = pdc202xx_set_dmamode,
-       .mode_filter    = ata_pci_default_filter,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = pdc2024x_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-       .data_xfer      = ata_pio_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-
-       .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
+       .inherits               = &ata_bmdma_port_ops,
+
+       .cable_detect           = ata_cable_40wire,
+       .set_piomode            = pdc202xx_set_piomode,
+       .set_dmamode            = pdc202xx_set_dmamode,
+
+       .sff_exec_command       = pdc202xx_exec_command,
+       .sff_irq_check          = pdc202xx_irq_check,
 };
 
 static struct ata_port_operations pdc2026x_port_ops = {
-       .port_disable   = ata_port_disable,
-       .set_piomode    = pdc202xx_set_piomode,
-       .set_dmamode    = pdc202xx_set_dmamode,
-       .mode_filter    = ata_pci_default_filter,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-       .dev_config     = pdc2026x_dev_config,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = pdc2026x_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = pdc2026x_bmdma_start,
-       .bmdma_stop     = pdc2026x_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-       .data_xfer      = ata_pio_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-
-       .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
+       .inherits               = &pdc2024x_port_ops,
+
+       .check_atapi_dma        = pdc2026x_check_atapi_dma,
+       .bmdma_start            = pdc2026x_bmdma_start,
+       .bmdma_stop             = pdc2026x_bmdma_stop,
+
+       .cable_detect           = pdc2026x_cable_detect,
+       .dev_config             = pdc2026x_dev_config,
+
+       .port_start             = pdc2026x_port_start,
+
+       .sff_exec_command       = pdc202xx_exec_command,
+       .sff_irq_check          = pdc202xx_irq_check,
 };
 
 static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       static struct ata_port_info info[3] = {
+       static const struct ata_port_info info[3] = {
                {
-                       .sht = &pdc202xx_sht,
-                       .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-                       .pio_mask = 0x1f,
-                       .mwdma_mask = 0x07,
+                       .flags = ATA_FLAG_SLAVE_POSS,
+                       .pio_mask = ATA_PIO4,
+                       .mwdma_mask = ATA_MWDMA2,
                        .udma_mask = ATA_UDMA2,
                        .port_ops = &pdc2024x_port_ops
                },
                {
-                       .sht = &pdc202xx_sht,
-                       .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-                       .pio_mask = 0x1f,
-                       .mwdma_mask = 0x07,
+                       .flags = ATA_FLAG_SLAVE_POSS,
+                       .pio_mask = ATA_PIO4,
+                       .mwdma_mask = ATA_MWDMA2,
                        .udma_mask = ATA_UDMA4,
                        .port_ops = &pdc2026x_port_ops
                },
                {
-                       .sht = &pdc202xx_sht,
-                       .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-                       .pio_mask = 0x1f,
-                       .mwdma_mask = 0x07,
+                       .flags = ATA_FLAG_SLAVE_POSS,
+                       .pio_mask = ATA_PIO4,
+                       .mwdma_mask = ATA_MWDMA2,
                        .udma_mask = ATA_UDMA5,
                        .port_ops = &pdc2026x_port_ops
                }
 
        };
-       static struct ata_port_info *port_info[2];
-
-       port_info[0] = port_info[1] = &info[id->driver_data];
+       const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
 
        if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
                struct pci_dev *bridge = dev->bus->self;
                /* Don't grab anything behind a Promise I2O RAID */
                if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
-                       if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+                       if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
                                return -ENODEV;
-                       if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+                       if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
                                return -ENODEV;
                }
        }
-       return ata_pci_init_one(dev, port_info, 2);
+       return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
 }
 
 static const struct pci_device_id pdc202xx[] = {
@@ -402,8 +378,10 @@ static struct pci_driver pdc202xx_pci_driver = {
        .id_table       = pdc202xx,
        .probe          = pdc202xx_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = ata_pci_device_resume,
+#endif
 };
 
 static int __init pdc202xx_init(void)