[SCSI] libsas: execute transport link resets with libata-eh via host workqueue
[linux-2.6.git] / drivers / Makefile
index 2735bde..c07be02 100644 (file)
@@ -5,21 +5,33 @@
 # Rewritten to use lists instead of if-statements.
 #
 
+# GPIO must come after pinctrl as gpios may need to mux pins etc
+obj-y                          += pinctrl/
 obj-y                          += gpio/
 obj-$(CONFIG_PCI)              += pci/
 obj-$(CONFIG_PARISC)           += parisc/
 obj-$(CONFIG_RAPIDIO)          += rapidio/
 obj-y                          += video/
+obj-y                          += idle/
 obj-$(CONFIG_ACPI)             += acpi/
+obj-$(CONFIG_SFI)              += sfi/
 # PnP must come after ACPI since it will eventually need to check if acpi
 # was used and do nothing if so
 obj-$(CONFIG_PNP)              += pnp/
 obj-$(CONFIG_ARM_AMBA)         += amba/
+# Many drivers will want to use DMA so this has to be made available
+# really early.
+obj-$(CONFIG_DMA_ENGINE)       += dma/
 
+obj-$(CONFIG_VIRTIO)           += virtio/
 obj-$(CONFIG_XEN)              += xen/
 
-# char/ comes before serial/ etc so that the VT console is the boot-time
+# regulators early, since some subsystems rely on them to initialize
+obj-$(CONFIG_REGULATOR)                += regulator/
+
+# tty/ comes before char/ so that the VT console is the boot-time
 # default.
+obj-y                          += tty/
 obj-y                          += char/
 
 # gpu/ comes after char for AGP vs DRM startup
@@ -31,23 +43,23 @@ obj-$(CONFIG_CONNECTOR)             += connector/
 obj-$(CONFIG_FB_I810)           += video/i810/
 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
-obj-y                          += serial/
 obj-$(CONFIG_PARPORT)          += parport/
-obj-y                          += base/ block/ misc/ mfd/ net/ media/
+obj-y                          += base/ block/ misc/ mfd/ nfc/
 obj-$(CONFIG_NUBUS)            += nubus/
-obj-$(CONFIG_ATM)              += atm/
 obj-y                          += macintosh/
 obj-$(CONFIG_IDE)              += ide/
 obj-$(CONFIG_SCSI)             += scsi/
 obj-$(CONFIG_ATA)              += ata/
+obj-$(CONFIG_TARGET_CORE)      += target/
+obj-$(CONFIG_MTD)              += mtd/
+obj-$(CONFIG_SPI)              += spi/
+obj-y                          += net/
+obj-$(CONFIG_ATM)              += atm/
 obj-$(CONFIG_FUSION)           += message/
-obj-$(CONFIG_FIREWIRE)         += firewire/
-obj-y                          += ieee1394/
+obj-y                          += firewire/
 obj-$(CONFIG_UIO)              += uio/
 obj-y                          += cdrom/
 obj-y                          += auxdisplay/
-obj-$(CONFIG_MTD)              += mtd/
-obj-$(CONFIG_SPI)              += spi/
 obj-$(CONFIG_PCCARD)           += pcmcia/
 obj-$(CONFIG_DIO)              += dio/
 obj-$(CONFIG_SBUS)             += sbus/
@@ -56,16 +68,19 @@ obj-$(CONFIG_MAC)           += macintosh/
 obj-$(CONFIG_ATA_OVER_ETH)     += block/aoe/
 obj-$(CONFIG_PARIDE)           += block/paride/
 obj-$(CONFIG_TC)               += tc/
+obj-$(CONFIG_UWB)              += uwb/
+obj-$(CONFIG_USB_OTG_UTILS)    += usb/
 obj-$(CONFIG_USB)              += usb/
-obj-$(CONFIG_USB_MUSB_HDRC)    += usb/musb/
 obj-$(CONFIG_PCI)              += usb/
-obj-$(CONFIG_USB_GADGET)       += usb/gadget/
+obj-$(CONFIG_USB_GADGET)       += usb/
 obj-$(CONFIG_SERIO)            += input/serio/
 obj-$(CONFIG_GAMEPORT)         += input/gameport/
 obj-$(CONFIG_INPUT)            += input/
 obj-$(CONFIG_I2O)              += message/
 obj-$(CONFIG_RTC_LIB)          += rtc/
-obj-y                          += i2c/
+obj-y                          += i2c/ media/
+obj-$(CONFIG_PPS)              += pps/
+obj-$(CONFIG_PTP_1588_CLOCK)   += ptp/
 obj-$(CONFIG_W1)               += w1/
 obj-$(CONFIG_POWER_SUPPLY)     += power/
 obj-$(CONFIG_HWMON)            += hwmon/
@@ -82,20 +97,38 @@ obj-$(CONFIG_EISA)          += eisa/
 obj-y                          += lguest/
 obj-$(CONFIG_CPU_FREQ)         += cpufreq/
 obj-$(CONFIG_CPU_IDLE)         += cpuidle/
-obj-$(CONFIG_MMC)              += mmc/
+obj-y                          += mmc/
 obj-$(CONFIG_MEMSTICK)         += memstick/
-obj-$(CONFIG_NEW_LEDS)         += leds/
+obj-y                          += leds/
 obj-$(CONFIG_INFINIBAND)       += infiniband/
 obj-$(CONFIG_SGI_SN)           += sn/
 obj-y                          += firmware/
 obj-$(CONFIG_CRYPTO)           += crypto/
 obj-$(CONFIG_SUPERH)           += sh/
-obj-$(CONFIG_GENERIC_TIME)     += clocksource/
-obj-$(CONFIG_DMA_ENGINE)       += dma/
+obj-$(CONFIG_ARCH_SHMOBILE)    += sh/
+ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
+obj-y                          += clocksource/
+endif
 obj-$(CONFIG_DCA)              += dca/
 obj-$(CONFIG_HID)              += hid/
 obj-$(CONFIG_PPC_PS3)          += ps3/
 obj-$(CONFIG_OF)               += of/
 obj-$(CONFIG_SSB)              += ssb/
-obj-$(CONFIG_VIRTIO)           += virtio/
-obj-$(CONFIG_REGULATOR)                += regulator/
+obj-$(CONFIG_BCMA)             += bcma/
+obj-$(CONFIG_VHOST_NET)                += vhost/
+obj-$(CONFIG_VLYNQ)            += vlynq/
+obj-$(CONFIG_STAGING)          += staging/
+obj-y                          += platform/
+obj-y                          += ieee802154/
+#common clk code
+obj-y                          += clk/
+
+obj-$(CONFIG_HWSPINLOCK)       += hwspinlock/
+obj-$(CONFIG_NFC)              += nfc/
+obj-$(CONFIG_IOMMU_SUPPORT)    += iommu/
+
+# Virtualization drivers
+obj-$(CONFIG_VIRT_DRIVERS)     += virt/
+obj-$(CONFIG_HYPERV)           += hv/
+
+obj-$(CONFIG_PM_DEVFREQ)       += devfreq/