select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_IOREMAP_PROT
select HAVE_KPROBES
+ select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
select HAVE_KRETPROBES
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
string
- depends on X86_32
- option defconfig_list
- default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
- string
- depends on X86_64
- option defconfig_list
- default "arch/x86/configs/x86_64_defconfig"
+ default "arch/x86/configs/i386_defconfig" if X86_32
+ default "arch/x86/configs/x86_64_defconfig" if X86_64
config GENERIC_LOCKBREAK
def_bool y
config HAVE_SETUP_PER_CPU_AREA
- def_bool X86_64 || (X86_SMP && !X86_VOYAGER)
+ def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
config HAVE_CPUMASK_OF_CPU_MAP
def_bool X86_64_SMP
config X86_SMP
bool
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
+ select USE_GENERIC_SMP_HELPERS
default y
config X86_32_SMP
config X86_HT
bool
depends on SMP
- depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || X86_64
+ depends on (X86_32 && !X86_VOYAGER) || X86_64
default y
config X86_BIOS_REBOOT
bool
- depends on !X86_VISWS && !X86_VOYAGER
+ depends on !X86_VOYAGER
default y
config X86_TRAMPOLINE
If you don't know what to do here, say N.
+config X86_FIND_SMP_CONFIG
+ def_bool y
+ depends on X86_MPPARSE || X86_VOYAGER
+
+if ACPI
+config X86_MPPARSE
+ def_bool y
+ bool "Enable MPS table"
+ depends on X86_LOCAL_APIC
+ help
+ For old smp systems that do not have proper acpi support. Newer systems
+ (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
+endif
+
+if !ACPI
+config X86_MPPARSE
+ def_bool y
+ depends on X86_LOCAL_APIC
+endif
+
choice
prompt "Subarchitecture Type"
default X86_PC
config X86_VOYAGER
bool "Voyager (NCR)"
- depends on X86_32 && (SMP || BROKEN)
+ depends on X86_32 && (SMP || BROKEN) && !PCI
help
Voyager is an MCA-based 32-way capable SMP architecture proprietary
to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
If you do not specifically know you have a Voyager based machine,
say N here, otherwise the kernel you build will not be bootable.
+config X86_GENERICARCH
+ bool "Generic architecture"
+ depends on X86_32
+ help
+ This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+ subarchitectures. It is intended for a generic binary kernel.
+ if you select them all, kernel will probe it one by one. and will
+ fallback to default.
+
+if X86_GENERICARCH
+
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
- depends on SMP && X86_32
+ depends on SMP && X86_32 && PCI && X86_MPPARSE
select NUMA
help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
- multiquad box. This changes the way that processors are bootstrapped,
- and uses Clustered Logical APIC addressing mode instead of Flat Logical.
- You will need a new lynxer.elf file to flash your firmware with - send
- email to <Martin.Bligh@us.ibm.com>.
+ This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+ NUMA multiquad box. This changes the way that processors are
+ bootstrapped, and uses Clustered Logical APIC addressing mode instead
+ of Flat Logical. You will need a new lynxer.elf file to flash your
+ firmware with - send email to <Martin.Bligh@us.ibm.com>.
config X86_SUMMIT
bool "Summit/EXA (IBM x440)"
This option is needed for IBM systems that use the Summit/EXA chipset.
In particular, it is needed for the x440.
- If you don't have one of these computers, you should say N here.
- If you want to build a NUMA kernel, you must select ACPI.
+config X86_ES7000
+ bool "Support for Unisys ES7000 IA32 series"
+ depends on X86_32 && SMP
+ help
+ Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
+ supposed to run on an IA32-based Unisys ES7000 system.
config X86_BIGSMP
- bool "Support for other sub-arch SMP systems with more than 8 CPUs"
+ bool "Support for big SMP systems with more than 8 CPUs"
depends on X86_32 && SMP
help
This option is needed for the systems that have more than 8 CPUs
and if the system is not of any sub-arch type above.
- If you don't have such a system, you should say N here.
-
-config X86_VISWS
- bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32
- help
- The SGI Visual Workstation series is an IA32-based workstation
- based on SGI systems chips with some legacy PC hardware attached.
-
- Say Y here to create a kernel to run on the SGI 320 or 540.
-
- A kernel compiled for the Visual Workstation will not run on PCs
- and vice versa. See <file:Documentation/sgi-visws.txt> for details.
-
-config X86_GENERICARCH
- bool "Generic architecture (Summit, bigsmp, ES7000, default)"
- depends on X86_32
- help
- This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
- It is intended for a generic binary kernel.
- If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
-
-config X86_ES7000
- bool "Support for Unisys ES7000 IA32 series"
- depends on X86_32 && SMP
- help
- Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
- supposed to run on an IA32-based Unisys ES7000 system.
- Only choose this option if you have such a system, otherwise you
- should say N here.
+endif
config X86_RDC321X
bool "RDC R-321x SoC"
config X86_VSMP
bool "Support for ScaleMP vSMP"
select PARAVIRT
- depends on X86_64
+ depends on X86_64 && PCI
help
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
supposed to run on these EM64T-based machines. Only choose this option
endchoice
+config X86_VISWS
+ bool "SGI 320/540 (Visual Workstation)"
+ depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
+ help
+ The SGI Visual Workstation series is an IA32-based workstation
+ based on SGI systems chips with some legacy PC hardware attached.
+
+ Say Y here to create a kernel to run on the SGI 320 or 540.
+
+ A kernel compiled for the Visual Workstation will run on general
+ PCs as well. See <file:Documentation/sgi-visws.txt> for details.
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
bool "VMI Guest support"
select PARAVIRT
depends on X86_32
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !X86_VOYAGER
help
VMI provides a paravirtualized interface to the VMware ESX server
(it could be used by other hypervisors in theory too, but is not
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
- depends on !(X86_VISWS || X86_VOYAGER)
+ select PARAVIRT_CLOCK
+ depends on !X86_VOYAGER
help
Turning on this option will allow you to run a paravirtualized clock
when running over the KVM hypervisor. Instead of relying on a PIT
config KVM_GUEST
bool "KVM Guest support"
select PARAVIRT
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !X86_VOYAGER
help
This option enables various optimizations for running under the KVM
hypervisor.
config PARAVIRT
bool "Enable paravirtualization code"
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !X86_VOYAGER
help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
-endif
+config PARAVIRT_CLOCK
+ bool
+ default n
-config MEMTEST_BOOTPARAM
- bool "Memtest boot parameter"
- depends on X86_64
- default y
- help
- This option adds a kernel parameter 'memtest', which allows memtest
- to be disabled at boot. If this option is selected, memtest
- functionality can be disabled with memtest=0 on the kernel
- command line. The purpose of this option is to allow a single
- kernel image to be distributed with memtest built in, but not
- necessarily enabled.
+endif
- If you are unsure how to answer this question, answer Y.
+config PARAVIRT_DEBUG
+ bool "paravirt-ops debugging"
+ depends on PARAVIRT && DEBUG_KERNEL
+ help
+ Enable to debug paravirt_ops internals. Specifically, BUG if
+ a paravirt_op is missing when it is called.
-config MEMTEST_BOOTPARAM_VALUE
- int "Memtest boot parameter default value (0-4)"
- depends on MEMTEST_BOOTPARAM
- range 0 4
- default 0
+config MEMTEST
+ bool "Memtest"
help
- This option sets the default value for the kernel parameter
- 'memtest', which allows memtest to be disabled at boot. If this
- option is set to 0 (zero), the memtest kernel parameter will
- default to 0, disabling memtest at bootup. If this option is
- set to 4, the memtest kernel parameter will default to 4,
- enabling memtest at bootup, and use that as pattern number.
-
- If you are unsure how to answer this question, answer 0.
-
-config ACPI_SRAT
- def_bool y
- depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
- select ACPI_NUMA
-
-config HAVE_ARCH_PARSE_SRAT
- def_bool y
- depends on ACPI_SRAT
+ This option adds a kernel parameter 'memtest', which allows memtest
+ to be set.
+ memtest=0, mean disabled; -- default
+ memtest=1, mean do 1 test pattern;
+ ...
+ memtest=4, mean do 4 test patterns.
+ If you are unsure how to answer this question, answer N.
config X86_SUMMIT_NUMA
def_bool y
- depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on X86_32 && NUMA && X86_GENERICARCH
config X86_CYCLONE_TIMER
def_bool y
- depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
+ depends on X86_GENERICARCH
config ES7000_CLUSTERED_APIC
def_bool y
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
If unsure, say Y.
+config AMD_IOMMU
+ bool "AMD IOMMU support"
+ select SWIOTLB
+ depends on X86_64 && PCI && ACPI
+ help
+ With this option you can enable support for AMD IOMMU hardware in
+ your system. An IOMMU is a hardware component which provides
+ remapping of DMA memory accesses from devices. With an AMD IOMMU you
+ can isolate the the DMA memory of different devices and protect the
+ system from misbehaving device drivers or hardware.
+
+ You can find out if your system has an AMD IOMMU if you look into
+ your BIOS for an option to enable it or if you have an IVRS ACPI
+ table.
+
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
bool
3 GB of memory. If unsure, say Y.
config IOMMU_HELPER
- def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB)
+ def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+config MAXSMP
+ bool "Configure Maximum number of SMP Processors and NUMA Nodes"
+ depends on X86_64 && SMP
+ default n
+ help
+ Configure maximum number of CPUS and NUMA Nodes for this architecture.
+ If unsure, say N.
+
+if MAXSMP
+config NR_CPUS
+ int
+ default "4096"
+endif
+if !MAXSMP
config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
depends on SMP
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 255 and the
+ kernel will support. The maximum supported value is 4096 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+endif
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
- depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+ depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
config X86_LOCAL_APIC
def_bool y
- depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
+ depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
config X86_IO_APIC
def_bool y
- depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
+ depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
config X86_VISWS_APIC
def_bool y
config X86_MCE_P4THERMAL
bool "check for P4 thermal throttling interrupt."
- depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+ depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
help
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
- default y if (X86_NUMAQ || X86_SUMMIT)
+ default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
help
Enable NUMA (Non Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
+if MAXSMP
+
+config NODES_SHIFT
+ int
+ default "9"
+endif
+
+if !MAXSMP
config NODES_SHIFT
- int "Max num nodes shift(1-15)"
- range 1 15 if X86_64
+ int "Maximum NUMA Nodes (as a power of 2)"
+ range 1 9 if X86_64
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
+ help
+ Specify the maximum number of NUMA Nodes available on the target
+ system. Increases memory reserved to accomodate various tables.
+endif
config HAVE_ARCH_BOOTMEM_NODE
def_bool y
See <file:Documentation/mtrr.txt> for more information.
+config MTRR_SANITIZER
+ bool
+ prompt "MTRR cleanup support"
+ depends on MTRR
+ help
+ Convert MTRR layout from continuous to discrete, so X drivers can
+ add writeback entries.
+
+ Can be disabled with disable_mtrr_cleanup on the kernel command line.
+ The largest mtrr entry size for a continous block can be set with
+ mtrr_chunk_size.
+
+ If unsure, say N.
+
+config MTRR_SANITIZER_ENABLE_DEFAULT
+ int "MTRR cleanup enable value (0-1)"
+ range 0 1
+ default "0"
+ depends on MTRR_SANITIZER
+ help
+ Enable mtrr cleanup default value
+
+config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
+ int "MTRR cleanup spare reg num (0-7)"
+ range 0 7
+ default "1"
+ depends on MTRR_SANITIZER
+ help
+ mtrr cleanup spare entries default, it can be changed via
+ mtrr_spare_reg_nr=N on the kernel command line.
+
config X86_PAT
bool
prompt "x86 PAT support"
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
- depends on EXPERIMENTAL
depends on X86_64 || (X86_32 && HIGHMEM)
help
Generate crash dump after being started by kexec.
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
- depends on X86_32 && PM_SLEEP && !X86_VISWS
+ depends on X86_32 && PM_SLEEP
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
menu "Bus options (PCI etc.)"
config PCI
- bool "PCI support" if !X86_VISWS && !X86_VSMP
- depends on !X86_VOYAGER
+ bool "PCI support"
default y
select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
help
choice
prompt "PCI access mode"
- depends on X86_32 && PCI && !X86_VISWS
+ depends on X86_32 && PCI
default PCI_GOANY
---help---
On PCI systems, the BIOS can be used to detect the PCI devices and
config PCI_GODIRECT
bool "Direct"
-config PCI_GOANY
- bool "Any"
-
config PCI_GOOLPC
bool "OLPC"
depends on OLPC
+config PCI_GOANY
+ bool "Any"
+
endchoice
config PCI_BIOS
def_bool y
- depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+ depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
config PCI_DIRECT
def_bool y
- depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
config PCI_MMCONFIG
def_bool y
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
- bool
- depends on PCI && PCI_GOOLPC
- default y
+ def_bool y
+ depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
config PCI_DOMAINS
def_bool y
config ISA
bool "ISA support"
- depends on !(X86_VOYAGER || X86_VISWS)
+ depends on !X86_VOYAGER
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
source "drivers/eisa/Kconfig"
config MCA
- bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
+ bool "MCA support" if !X86_VOYAGER
default y if X86_VOYAGER
help
MicroChannel Architecture is found in some IBM PS/2 machines and
Code Review / linux-2.6.git / blobdiff