#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
+#include <linux/smp.h>
#include <linux/stddef.h>
+#include <linux/module.h>
+#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
+#include <asm/watch.h>
+#include <asm/spram.h>
+#include <asm/uaccess.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
* The wait instruction stops the pipeline and reduces the power consumption of
* the CPU very much.
*/
-void (*cpu_wait)(void) = NULL;
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
static void r3081_wait(void)
{
static void r39xx_wait(void)
{
- unsigned long cfg = read_c0_conf();
- write_c0_conf(cfg | TX39_CONF_HALT);
+ local_irq_disable();
+ if (!need_resched())
+ write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+ local_irq_enable();
}
-static void r4k_wait(void)
+extern void r4k_wait(void);
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically. Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
{
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(" .set push \n"
+ " .set mips3 \n"
+ " wait \n"
+ " .set pop \n");
+ local_irq_enable();
+ __asm__(" .globl __pastwait \n"
+ "__pastwait: \n");
+ return;
}
-/* The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter. */
-int allow_au1k_wait;
+/*
+ * The RM7000 variant has to handle erratum 38. The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " sync \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " wait \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " .set pop \n");
+ local_irq_enable();
+}
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
static void au1k_wait(void)
{
- /* using the wait instruction makes CP0 counter unusable */
- __asm__(".set mips3\n\t"
- "cache 0x14, 0(%0)\n\t"
- "cache 0x14, 32(%0)\n\t"
- "sync\n\t"
- "nop\n\t"
- "wait\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- ".set mips0\n\t"
+ __asm__(" .set mips3 \n"
+ " cache 0x14, 0(%0) \n"
+ " cache 0x14, 32(%0) \n"
+ " sync \n"
+ " nop \n"
+ " wait \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " .set mips0 \n"
: : "r" (au1k_wait));
}
-static int __initdata nowait = 0;
+static int __initdata nowait;
-int __init wait_disable(char *s)
+static int __init wait_disable(char *s)
{
nowait = 1;
__setup("nowait", wait_disable);
-static inline void check_wait(void)
+static int __cpuinitdata mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+ cpu_data[0].options &= ~MIPS_CPU_FPU;
+ mips_fpu_disabled = 1;
+
+ return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
+int __cpuinitdata mips_dsp_disabled;
+
+static int __init dsp_disable(char *s)
+{
+ cpu_data[0].ases &= ~MIPS_ASE_DSP;
+ mips_dsp_disabled = 1;
+
+ return 1;
+}
+
+__setup("nodsp", dsp_disable);
+
+void __init check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- printk("Checking for 'wait' instruction... ");
if (nowait) {
- printk (" disabled.\n");
+ printk("Wait instruction disabled.\n");
return;
}
case CPU_R3081:
case CPU_R3081E:
cpu_wait = r3081_wait;
- printk(" available.\n");
break;
case CPU_TX3927:
cpu_wait = r39xx_wait;
- printk(" available.\n");
break;
case CPU_R4200:
/* case CPU_R4300: */
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
+ case CPU_R5500:
case CPU_NEVADA:
- case CPU_RM7000:
- case CPU_RM9000:
- case CPU_TX49XX:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
case CPU_5KC:
-/* case CPU_20KC:*/
- case CPU_24K:
case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BMIPS3300:
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ case CPU_BMIPS5000:
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ case CPU_JZRISC:
+ cpu_wait = r4k_wait;
+ break;
+
+ case CPU_RM7000:
+ cpu_wait = rm7k_wait_irqoff;
+ break;
+
+ case CPU_24K:
case CPU_34K:
+ case CPU_1004K:
+ cpu_wait = r4k_wait;
+ if (read_c0_config7() & MIPS_CONF7_WII)
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
case CPU_74K:
- case CPU_PR4450:
cpu_wait = r4k_wait;
- printk(" available.\n");
- break;
- case CPU_AU1000:
- case CPU_AU1100:
- case CPU_AU1500:
- case CPU_AU1550:
- case CPU_AU1200:
- if (allow_au1k_wait) {
- cpu_wait = au1k_wait;
- printk(" available.\n");
- } else
- printk(" unavailable.\n");
+ if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
+ case CPU_TX49XX:
+ cpu_wait = r4k_wait_irqoff;
+ break;
+ case CPU_ALCHEMY:
+ cpu_wait = au1k_wait;
+ break;
+ case CPU_20KC:
+ /*
+ * WAIT on Rev1.0 has E1, E2, E3 and E16.
+ * WAIT on Rev2.0 and Rev3.0 has E16.
+ * Rev3.1 WAIT is nop, why bother
+ */
+ if ((c->processor_id & 0xff) <= 0x64)
+ break;
+
+ /*
+ * Another rev is incremeting c0_count at a reduced clock
+ * rate while in WAIT mode. So we basically have the choice
+ * between using the cp0 timer as clocksource or avoiding
+ * the WAIT instruction. Until more details are known,
+ * disable the use of WAIT for 20Kc entirely.
+ cpu_wait = r4k_wait;
+ */
+ break;
+ case CPU_RM9000:
+ if ((c->processor_id & 0x00ff) >= 0x40)
+ cpu_wait = r4k_wait;
+ break;
+ default:
+ break;
+ }
+}
+
+static inline void check_errata(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ switch (c->cputype) {
+ case CPU_34K:
+ /*
+ * Erratum "RPS May Cause Incorrect Instruction Execution"
+ * This code only handles VPE0, any SMP/SMTC/RTOS code
+ * making use of VPE1 will be responsable for that VPE.
+ */
+ if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
+ write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
break;
default:
- printk(" unavailable.\n");
break;
}
}
void __init check_bugs32(void)
{
- check_wait();
+ check_errata();
}
/*
#endif
}
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+ if (cpu == 0)
+ __elf_platform = plat;
+}
+
/*
* Get the FPU Implementation/Revision.
*/
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
}
+static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
+{
+#ifdef __NEED_VMBITS_PROBE
+ write_c0_entryhi(0x3fffffffffffe000ULL);
+ back_to_back_c0_hazard();
+ c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
+#endif
+}
+
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
-static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
+static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & 0xff00) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
+ __cpu_name[cpu] = "R2000";
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
- if (cpu_has_confreg())
+ if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+ if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
- else
+ __cpu_name[cpu] = "R3081";
+ } else {
c->cputype = CPU_R3000A;
- else
+ __cpu_name[cpu] = "R3000A";
+ }
+ break;
+ } else {
c->cputype = CPU_R3000;
+ __cpu_name[cpu] = "R3000";
+ }
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
- else
+ __cpu_name[cpu] = "R4400PC";
+ } else {
c->cputype = CPU_R4000PC;
+ __cpu_name[cpu] = "R4000PC";
+ }
} else {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400SC;
- else
+ __cpu_name[cpu] = "R4400SC";
+ } else {
c->cputype = CPU_R4000SC;
+ __cpu_name[cpu] = "R4000SC";
+ }
}
c->isa_level = MIPS_CPU_ISA_III;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
+ __cpu_name[cpu] = "NEC VR4111";
break;
case PRID_REV_VR4121:
c->cputype = CPU_VR4121;
+ __cpu_name[cpu] = "NEC VR4121";
break;
case PRID_REV_VR4122:
- if ((c->processor_id & 0xf) < 0x3)
+ if ((c->processor_id & 0xf) < 0x3) {
c->cputype = CPU_VR4122;
- else
+ __cpu_name[cpu] = "NEC VR4122";
+ } else {
c->cputype = CPU_VR4181A;
+ __cpu_name[cpu] = "NEC VR4181A";
+ }
break;
case PRID_REV_VR4130:
- if ((c->processor_id & 0xf) < 0x4)
+ if ((c->processor_id & 0xf) < 0x4) {
c->cputype = CPU_VR4131;
- else
+ __cpu_name[cpu] = "NEC VR4131";
+ } else {
c->cputype = CPU_VR4133;
+ __cpu_name[cpu] = "NEC VR4133";
+ }
break;
default:
printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
c->cputype = CPU_VR41XX;
+ __cpu_name[cpu] = "NEC Vr41xx";
break;
}
c->isa_level = MIPS_CPU_ISA_III;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
+ __cpu_name[cpu] = "R4300";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
+ __cpu_name[cpu] = "R4600";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
* it's c0_prid id number with the TX3900.
*/
c->cputype = CPU_R4650;
+ __cpu_name[cpu] = "R4650";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
+ __cpu_name[cpu] = "TX3927";
c->tlbsize = 64;
} else {
switch (c->processor_id & 0xff) {
case PRID_REV_TX3912:
c->cputype = CPU_TX3912;
+ __cpu_name[cpu] = "TX3912";
c->tlbsize = 32;
break;
case PRID_REV_TX3922:
c->cputype = CPU_TX3922;
+ __cpu_name[cpu] = "TX3922";
c->tlbsize = 64;
break;
- default:
- c->cputype = CPU_UNKNOWN;
- break;
}
}
break;
case PRID_IMP_R4700:
c->cputype = CPU_R4700;
+ __cpu_name[cpu] = "R4700";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_TX49:
c->cputype = CPU_TX49XX;
+ __cpu_name[cpu] = "R49XX";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_LLSC;
if (!(c->processor_id & 0x08))
break;
case PRID_IMP_R5000:
c->cputype = CPU_R5000;
+ __cpu_name[cpu] = "R5000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R5432:
c->cputype = CPU_R5432;
+ __cpu_name[cpu] = "R5432";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_R5500:
c->cputype = CPU_R5500;
+ __cpu_name[cpu] = "R5500";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_NEVADA:
c->cputype = CPU_NEVADA;
+ __cpu_name[cpu] = "Nevada";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000:
c->cputype = CPU_R6000;
+ __cpu_name[cpu] = "R6000";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000A:
c->cputype = CPU_R6000A;
+ __cpu_name[cpu] = "R6000A";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM7000:
c->cputype = CPU_RM7000;
+ __cpu_name[cpu] = "RM7000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM9000:
c->cputype = CPU_RM9000;
+ __cpu_name[cpu] = "RM9000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R8000:
c->cputype = CPU_R8000;
+ __cpu_name[cpu] = "RM8000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
+ __cpu_name[cpu] = "R10000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
+ __cpu_name[cpu] = "R12000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R14000:
c->cputype = CPU_R14000;
+ __cpu_name[cpu] = "R14000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON2:
+ c->cputype = CPU_LOONGSON2;
+ __cpu_name[cpu] = "ICT Loongson-2";
+
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON2E:
+ set_elf_platform(cpu, "loongson2e");
+ break;
+ case PRID_REV_LOONGSON2F:
+ set_elf_platform(cpu, "loongson2f");
+ break;
+ }
+
+ c->isa_level = MIPS_CPU_ISA_III;
+ c->options = R4K_OPTS |
+ MIPS_CPU_FPU | MIPS_CPU_LLSC |
+ MIPS_CPU_32FPR;
+ c->tlbsize = 64;
+ break;
}
}
-static char unknown_isa[] __initdata = KERN_ERR \
+static char unknown_isa[] __cpuinitdata = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
case 0:
- switch ((config0 >> 10) & 7) {
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
c->isa_level = MIPS_CPU_ISA_M32R1;
break;
}
break;
case 2:
- switch ((config0 >> 10) & 7) {
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
c->isa_level = MIPS_CPU_ISA_M64R1;
break;
if (config3 & MIPS_CONF3_VEIC)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
- c->ases |= MIPS_ASE_MIPSMT;
+ c->ases |= MIPS_ASE_MIPSMT;
+ if (config3 & MIPS_CONF3_ULRI)
+ c->options |= MIPS_CPU_ULRI;
return config3 & MIPS_CONF_M;
}
-static inline void decode_configs(struct cpuinfo_mips *c)
+static inline unsigned int decode_config4(struct cpuinfo_mips *c)
{
+ unsigned int config4;
+
+ config4 = read_c0_config4();
+
+ if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
+ && cpu_has_tlb)
+ c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+
+ c->kscratch_mask = (config4 >> 16) & 0xff;
+
+ return config4 & MIPS_CONF_M;
+}
+
+static void __cpuinit decode_configs(struct cpuinfo_mips *c)
+{
+ int ok;
+
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- /* Read Config registers. */
- if (!decode_config0(c))
- return; /* actually worth a panic() */
- if (!decode_config1(c))
- return;
- if (!decode_config2(c))
- return;
- if (!decode_config3(c))
- return;
+ ok = decode_config0(c); /* Read Config registers. */
+ BUG_ON(!ok); /* Arch spec violation! */
+ if (ok)
+ ok = decode_config1(c);
+ if (ok)
+ ok = decode_config2(c);
+ if (ok)
+ ok = decode_config3(c);
+ if (ok)
+ ok = decode_config4(c);
+
+ mips_probe_watch_registers(c);
+
+ if (cpu_has_mips_r2)
+ c->core = read_c0_ebase() & 0x3ff;
}
-static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
+ __cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
- c->cputype = CPU_4KEC;
- break;
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KSC:
case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
+ __cpu_name[cpu] = "MIPS 4KSc";
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
+ __cpu_name[cpu] = "MIPS 5Kc";
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
+ __cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
case PRID_IMP_24KE:
c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24Kc";
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
+ __cpu_name[cpu] = "MIPS 25Kc";
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
+ __cpu_name[cpu] = "MIPS 34Kc";
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
+ __cpu_name[cpu] = "MIPS 74Kc";
+ break;
+ case PRID_IMP_1004K:
+ c->cputype = CPU_1004K;
+ __cpu_name[cpu] = "MIPS 1004Kc";
break;
}
+
+ spram_config();
}
-static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
+static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
+ c->cputype = CPU_ALCHEMY;
switch ((c->processor_id >> 24) & 0xff) {
case 0:
- c->cputype = CPU_AU1000;
+ __cpu_name[cpu] = "Au1000";
break;
case 1:
- c->cputype = CPU_AU1500;
+ __cpu_name[cpu] = "Au1500";
break;
case 2:
- c->cputype = CPU_AU1100;
+ __cpu_name[cpu] = "Au1100";
break;
case 3:
- c->cputype = CPU_AU1550;
+ __cpu_name[cpu] = "Au1550";
break;
case 4:
- c->cputype = CPU_AU1200;
+ __cpu_name[cpu] = "Au1200";
+ if ((c->processor_id & 0xff) == 2)
+ __cpu_name[cpu] = "Au1250";
+ break;
+ case 5:
+ __cpu_name[cpu] = "Au1210";
break;
default:
- panic("Unknown Au Core!");
+ __cpu_name[cpu] = "Au1xxx";
break;
}
break;
}
}
-static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
+static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
- /*
- * For historical reasons the SB1 comes with it's own variant of
- * cache code which eventually will be folded into c-r4k.c. Until
- * then we pretend it's got it's own cache architecture.
- */
- c->options &= ~MIPS_CPU_4K_CACHE;
- c->options |= MIPS_CPU_SB1_CACHE;
-
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
+ __cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & 0xff) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
+ __cpu_name[cpu] = "SiByte SB1A";
break;
}
}
-static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
+ __cpu_name[cpu] = "Sandcraft SR71000";
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
-static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_PR4450:
c->cputype = CPU_PR4450;
+ __cpu_name[cpu] = "Philips PR4450";
c->isa_level = MIPS_CPU_ISA_M32R1;
break;
+ }
+}
+
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BMIPS32_REV4:
+ case PRID_IMP_BMIPS32_REV8:
+ c->cputype = CPU_BMIPS32;
+ __cpu_name[cpu] = "Broadcom BMIPS32";
+ set_elf_platform(cpu, "bmips32");
+ break;
+ case PRID_IMP_BMIPS3300:
+ case PRID_IMP_BMIPS3300_ALT:
+ case PRID_IMP_BMIPS3300_BUG:
+ c->cputype = CPU_BMIPS3300;
+ __cpu_name[cpu] = "Broadcom BMIPS3300";
+ set_elf_platform(cpu, "bmips3300");
+ break;
+ case PRID_IMP_BMIPS43XX: {
+ int rev = c->processor_id & 0xff;
+
+ if (rev >= PRID_REV_BMIPS4380_LO &&
+ rev <= PRID_REV_BMIPS4380_HI) {
+ c->cputype = CPU_BMIPS4380;
+ __cpu_name[cpu] = "Broadcom BMIPS4380";
+ set_elf_platform(cpu, "bmips4380");
+ } else {
+ c->cputype = CPU_BMIPS4350;
+ __cpu_name[cpu] = "Broadcom BMIPS4350";
+ set_elf_platform(cpu, "bmips4350");
+ }
+ break;
+ }
+ case PRID_IMP_BMIPS5000:
+ c->cputype = CPU_BMIPS5000;
+ __cpu_name[cpu] = "Broadcom BMIPS5000";
+ set_elf_platform(cpu, "bmips5000");
+ c->options |= MIPS_CPU_ULRI;
+ break;
+ }
+}
+
+static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_CAVIUM_CN38XX:
+ case PRID_IMP_CAVIUM_CN31XX:
+ case PRID_IMP_CAVIUM_CN30XX:
+ c->cputype = CPU_CAVIUM_OCTEON;
+ __cpu_name[cpu] = "Cavium Octeon";
+ goto platform;
+ case PRID_IMP_CAVIUM_CN58XX:
+ case PRID_IMP_CAVIUM_CN56XX:
+ case PRID_IMP_CAVIUM_CN50XX:
+ case PRID_IMP_CAVIUM_CN52XX:
+ c->cputype = CPU_CAVIUM_OCTEON_PLUS;
+ __cpu_name[cpu] = "Cavium Octeon+";
+platform:
+ set_elf_platform(cpu, "octeon");
+ break;
+ case PRID_IMP_CAVIUM_CN63XX:
+ c->cputype = CPU_CAVIUM_OCTEON2;
+ __cpu_name[cpu] = "Cavium Octeon II";
+ set_elf_platform(cpu, "octeon2");
+ break;
default:
- panic("Unknown Philips Core!"); /* REVISIT: die? */
+ printk(KERN_INFO "Unknown Octeon chip!\n");
+ c->cputype = CPU_UNKNOWN;
break;
}
}
+static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ /* JZRISC does not implement the CP0 counter. */
+ c->options &= ~MIPS_CPU_COUNTER;
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_JZRISC:
+ c->cputype = CPU_JZRISC;
+ __cpu_name[cpu] = "Ingenic JZRISC";
+ break;
+ default:
+ panic("Unknown Ingenic Processor ID!");
+ break;
+ }
+}
-__init void cpu_probe(void)
+static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
+{
+ decode_configs(c);
+
+ c->options = (MIPS_CPU_TLB |
+ MIPS_CPU_4KEX |
+ MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC |
+ MIPS_CPU_WATCH |
+ MIPS_CPU_EJTAG |
+ MIPS_CPU_LLSC);
+
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLR732:
+ case PRID_IMP_NETLOGIC_XLR716:
+ case PRID_IMP_NETLOGIC_XLR532:
+ case PRID_IMP_NETLOGIC_XLR308:
+ case PRID_IMP_NETLOGIC_XLR532C:
+ case PRID_IMP_NETLOGIC_XLR516C:
+ case PRID_IMP_NETLOGIC_XLR508C:
+ case PRID_IMP_NETLOGIC_XLR308C:
+ c->cputype = CPU_XLR;
+ __cpu_name[cpu] = "Netlogic XLR";
+ break;
+
+ case PRID_IMP_NETLOGIC_XLS608:
+ case PRID_IMP_NETLOGIC_XLS408:
+ case PRID_IMP_NETLOGIC_XLS404:
+ case PRID_IMP_NETLOGIC_XLS208:
+ case PRID_IMP_NETLOGIC_XLS204:
+ case PRID_IMP_NETLOGIC_XLS108:
+ case PRID_IMP_NETLOGIC_XLS104:
+ case PRID_IMP_NETLOGIC_XLS616B:
+ case PRID_IMP_NETLOGIC_XLS608B:
+ case PRID_IMP_NETLOGIC_XLS416B:
+ case PRID_IMP_NETLOGIC_XLS412B:
+ case PRID_IMP_NETLOGIC_XLS408B:
+ case PRID_IMP_NETLOGIC_XLS404B:
+ c->cputype = CPU_XLR;
+ __cpu_name[cpu] = "Netlogic XLS";
+ break;
+
+ default:
+ printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n",
+ c->processor_id);
+ c->cputype = CPU_XLR;
+ break;
+ }
+
+ c->isa_level = MIPS_CPU_ISA_M64R1;
+ c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
+}
+
+#ifdef CONFIG_64BIT
+/* For use by uaccess.h */
+u64 __ua_limit;
+EXPORT_SYMBOL(__ua_limit);
+#endif
+
+const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
+
+__cpuinit void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
+ unsigned int cpu = smp_processor_id();
c->processor_id = PRID_IMP_UNKNOWN;
c->fpu_id = FPIR_IMP_NONE;
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
+ cpu_probe_legacy(c, cpu);
break;
case PRID_COMP_MIPS:
- cpu_probe_mips(c);
+ cpu_probe_mips(c, cpu);
break;
case PRID_COMP_ALCHEMY:
- cpu_probe_alchemy(c);
+ cpu_probe_alchemy(c, cpu);
break;
case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
+ cpu_probe_sibyte(c, cpu);
+ break;
+ case PRID_COMP_BROADCOM:
+ cpu_probe_broadcom(c, cpu);
break;
case PRID_COMP_SANDCRAFT:
- cpu_probe_sandcraft(c);
+ cpu_probe_sandcraft(c, cpu);
break;
- case PRID_COMP_PHILIPS:
- cpu_probe_philips(c);
+ case PRID_COMP_NXP:
+ cpu_probe_nxp(c, cpu);
+ break;
+ case PRID_COMP_CAVIUM:
+ cpu_probe_cavium(c, cpu);
+ break;
+ case PRID_COMP_INGENIC:
+ cpu_probe_ingenic(c, cpu);
+ break;
+ case PRID_COMP_NETLOGIC:
+ cpu_probe_netlogic(c, cpu);
break;
- default:
- c->cputype = CPU_UNKNOWN;
}
+
+ BUG_ON(!__cpu_name[cpu]);
+ BUG_ON(c->cputype == CPU_UNKNOWN);
+
+ /*
+ * Platform code can force the cpu type to optimize code
+ * generation. In that case be sure the cpu type is correctly
+ * manually setup otherwise it could trigger some nasty bugs.
+ */
+ BUG_ON(current_cpu_type() != c->cputype);
+
+ if (mips_fpu_disabled)
+ c->options &= ~MIPS_CPU_FPU;
+
+ if (mips_dsp_disabled)
+ c->ases &= ~MIPS_ASE_DSP;
+
if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
c->ases |= MIPS_ASE_MIPS3D;
}
}
+
+ if (cpu_has_mips_r2)
+ c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+ else
+ c->srsets = 1;
+
+ cpu_probe_vmbits(c);
+
+#ifdef CONFIG_64BIT
+ if (cpu == 0)
+ __ua_limit = ~((1ull << cpu_vmbits) - 1);
+#endif
}
-__init void cpu_report(void)
+__cpuinit void cpu_report(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- printk("CPU revision is: %08x\n", c->processor_id);
+ printk(KERN_INFO "CPU revision is: %08x (%s)\n",
+ c->processor_id, cpu_name_string());
if (c->options & MIPS_CPU_FPU)
- printk("FPU revision is: %08x\n", c->fpu_id);
+ printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
}
Code Review / linux-2.6.git / blobdiff