/*
* arch/arm/mach-tegra/board-whistler.c
*
- * Copyright (c) 2010 - 2011, NVIDIA Corporation.
+ * Copyright (c) 2010-2012 NVIDIA Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/i2c.h>
-#include <linux/i2c/panjit_ts.h>
+#include <linux/synaptics_i2c_rmi.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/i2c-tegra.h>
#include <linux/gpio.h>
#include <linux/gpio_scrollwheel.h>
#include <linux/input.h>
-#include <linux/tegra_usb.h>
+#include <linux/platform_data/tegra_usb.h>
+#include <linux/mfd/max8907c.h>
#include <linux/memblock.h>
+#include <linux/tegra_uart.h>
+#include <linux/rfkill-gpio.h>
#include <mach/clk.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
#include <mach/iomap.h>
#include <mach/io.h>
+#include <mach/i2s.h>
+#include <mach/tegra_asoc_pdata.h>
+#include <sound/tlv320aic326x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "devices.h"
#include "gpio-names.h"
#include "fuse.h"
+#include "pm.h"
+#include "board-whistler-baseband.h"
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
- .mapbase = TEGRA_UARTA_BASE,
- .irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0,
- }
+#define SZ_3M (SZ_1M + SZ_2M)
+#define SZ_152M (SZ_128M + SZ_16M + SZ_8M)
+#define USB1_VBUS_GPIO TCA6416_GPIO_BASE
+
+static struct platform_device *whistler_uart_devices[] __initdata = {
+ &tegra_uarta_device,
+ &tegra_uartb_device,
+ &tegra_uartc_device,
};
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
+struct uart_clk_parent uart_parent_clk[] = {
+ [0] = {.name = "pll_p"},
+ [1] = {.name = "pll_m"},
+ [2] = {.name = "clk_m"},
};
-#ifdef CONFIG_BCM4329_RFKILL
+static struct tegra_uart_platform_data whistler_uart_pdata;
+
+static void __init uart_debug_init(void)
+{
+ unsigned long rate;
+ struct clk *debug_uart_clk;
+ struct clk *c;
+ int modem_id = tegra_get_modem_id();
+
+ if (modem_id == 0x1) {
+ /* UARTB is the debug port. */
+ pr_info("Selecting UARTB as the debug console\n");
+ whistler_uart_devices[1] = &debug_uartb_device;
+ debug_uart_port_base = ((struct plat_serial8250_port *)(
+ debug_uartb_device.dev.platform_data))->mapbase;
+ debug_uart_clk = clk_get_sys("serial8250.0", "uartb");
+
+ /* Clock enable for the debug channel */
+ if (!IS_ERR_OR_NULL(debug_uart_clk)) {
+ rate = ((struct plat_serial8250_port *)(
+ debug_uartb_device.dev.platform_data))->uartclk;
+ pr_info("The debug console clock name is %s\n",
+ debug_uart_clk->name);
+ c = tegra_get_clock_by_name("pll_p");
+ if (IS_ERR_OR_NULL(c))
+ pr_err("Not getting the parent clock pll_p\n");
+ else
+ clk_set_parent(debug_uart_clk, c);
+
+ clk_enable(debug_uart_clk);
+ clk_set_rate(debug_uart_clk, rate);
+ } else {
+ pr_err("Not getting the clock %s for debug console\n",
+ debug_uart_clk->name);
+ }
+ } else {
+ /* UARTA is the debug port. */
+ pr_info("Selecting UARTA as the debug console\n");
+ whistler_uart_devices[0] = &debug_uarta_device;
+ debug_uart_port_base = ((struct plat_serial8250_port *)(
+ debug_uarta_device.dev.platform_data))->mapbase;
+ debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
+
+ /* Clock enable for the debug channel */
+ if (!IS_ERR_OR_NULL(debug_uart_clk)) {
+ rate = ((struct plat_serial8250_port *)(
+ debug_uarta_device.dev.platform_data))->uartclk;
+ pr_info("The debug console clock name is %s\n",
+ debug_uart_clk->name);
+ c = tegra_get_clock_by_name("pll_p");
+ if (IS_ERR_OR_NULL(c))
+ pr_err("Not getting the parent clock pll_p\n");
+ else
+ clk_set_parent(debug_uart_clk, c);
+
+ clk_enable(debug_uart_clk);
+ clk_set_rate(debug_uart_clk, rate);
+ } else {
+ pr_err("Not getting the clock %s for debug console\n",
+ debug_uart_clk->name);
+ }
+ }
+}
+
+static void __init whistler_uart_init(void)
+{
+ int i;
+ struct clk *c;
+
+ for (i = 0; i < ARRAY_SIZE(uart_parent_clk); ++i) {
+ c = tegra_get_clock_by_name(uart_parent_clk[i].name);
+ if (IS_ERR_OR_NULL(c)) {
+ pr_err("Not able to get the clock for %s\n",
+ uart_parent_clk[i].name);
+ continue;
+ }
+ uart_parent_clk[i].parent_clk = c;
+ uart_parent_clk[i].fixed_clk_rate = clk_get_rate(c);
+ }
+ whistler_uart_pdata.parent_clk_list = uart_parent_clk;
+ whistler_uart_pdata.parent_clk_count = ARRAY_SIZE(uart_parent_clk);
-static struct resource whistler_bcm4329_rfkill_resources[] = {
+ tegra_uarta_device.dev.platform_data = &whistler_uart_pdata;
+ tegra_uartb_device.dev.platform_data = &whistler_uart_pdata;
+ tegra_uartc_device.dev.platform_data = &whistler_uart_pdata;
+
+ if (!is_tegra_debug_uartport_hs())
+ uart_debug_init();
+
+ platform_add_devices(whistler_uart_devices,
+ ARRAY_SIZE(whistler_uart_devices));
+}
+static struct rfkill_gpio_platform_data whistler_bt_rfkill_pdata[] = {
{
- .name = "bcm4329_nshutdown_gpio",
- .start = TEGRA_GPIO_PU0,
- .end = TEGRA_GPIO_PU0,
- .flags = IORESOURCE_IO,
+ .name = "bt_rfkill",
+ .shutdown_gpio = TEGRA_GPIO_PU0,
+ .reset_gpio = TEGRA_GPIO_INVALID,
+ .type = RFKILL_TYPE_BLUETOOTH,
},
};
-static struct platform_device whistler_bcm4329_rfkill_device = {
- .name = "bcm4329_rfkill",
- .id = -1,
- .num_resources = ARRAY_SIZE(whistler_bcm4329_rfkill_resources),
- .resource = whistler_bcm4329_rfkill_resources,
+static struct platform_device whistler_bt_rfkill_device = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = whistler_bt_rfkill_pdata,
+ },
};
-static noinline void __init whistler_bt_rfkill(void)
-{
- platform_device_register(&whistler_bcm4329_rfkill_device);
- return;
-}
-#else
-static inline void whistler_bt_rfkill(void) { }
-#endif
-
-static struct tegra_utmip_config utmi_phy_config[] = {
+static struct resource whistler_bluesleep_resources[] = {
[0] = {
- .hssync_start_delay = 0,
- .idle_wait_delay = 17,
- .elastic_limit = 16,
- .term_range_adj = 6,
- .xcvr_setup = 15,
- .xcvr_lsfslew = 2,
- .xcvr_lsrslew = 2,
- },
+ .name = "gpio_host_wake",
+ .start = TEGRA_GPIO_PU6,
+ .end = TEGRA_GPIO_PU6,
+ .flags = IORESOURCE_IO,
+ },
[1] = {
- .hssync_start_delay = 0,
- .idle_wait_delay = 17,
- .elastic_limit = 16,
- .term_range_adj = 6,
- .xcvr_setup = 8,
- .xcvr_lsfslew = 2,
- .xcvr_lsrslew = 2,
- },
+ .name = "gpio_ext_wake",
+ .start = TEGRA_GPIO_PU1,
+ .end = TEGRA_GPIO_PU1,
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ .name = "host_wake",
+ .start = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_PU6),
+ .end = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_PU6),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
};
-static struct tegra_ulpi_config ulpi_phy_config = {
- .reset_gpio = TEGRA_GPIO_PG2,
- .clk = "clk_dev2",
- .inf_type = TEGRA_USB_LINK_ULPI,
+static struct platform_device whistler_bluesleep_device = {
+ .name = "bluesleep",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(whistler_bluesleep_resources),
+ .resource = whistler_bluesleep_resources,
};
+static void __init whistler_setup_bluesleep(void)
+{
+ platform_device_register(&whistler_bluesleep_device);
+ return;
+}
+
static __initdata struct tegra_clk_init_table whistler_clk_init_table[] = {
/* name parent rate enabled */
- { "uarta", "pll_p", 216000000, true},
- { "uartc", "pll_m", 600000000, false},
{ "pwm", "clk_32k", 32768, false},
{ "kbc", "clk_32k", 32768, true},
{ "sdmmc2", "pll_p", 25000000, false},
+ { "i2s1", "pll_a_out0", 0, false},
+ { "i2s2", "pll_a_out0", 0, false},
+ { "spdif_out", "pll_a_out0", 0, false},
{ NULL, NULL, 0, 0},
};
.adapter_nr = 0,
.bus_count = 1,
.bus_clk_rate = { 400000, 0 },
+ .scl_gpio = {TEGRA_GPIO_PC4, 0},
+ .sda_gpio = {TEGRA_GPIO_PC5, 0},
+ .arb_recovery = arb_lost_recovery,
+ .slave_addr = 0xFC,
};
static const struct tegra_pingroup_config i2c2_ddc = {
static struct tegra_i2c_platform_data whistler_i2c2_platform_data = {
.adapter_nr = 1,
.bus_count = 2,
- .bus_clk_rate = { 400000, 100000 },
+ .bus_clk_rate = { 10000, 100000 },
.bus_mux = { &i2c2_ddc, &i2c2_gen2 },
.bus_mux_len = { 1, 1 },
+ .scl_gpio = {0, TEGRA_GPIO_PT5},
+ .sda_gpio = {0, TEGRA_GPIO_PT6},
+ .arb_recovery = arb_lost_recovery,
+ .slave_addr = 0xFC,
};
static struct tegra_i2c_platform_data whistler_i2c3_platform_data = {
.adapter_nr = 3,
.bus_count = 1,
.bus_clk_rate = { 400000, 0 },
+ .scl_gpio = {TEGRA_GPIO_PBB2, 0},
+ .sda_gpio = {TEGRA_GPIO_PBB3, 0},
+ .arb_recovery = arb_lost_recovery,
+ .slave_addr = 0xFC,
};
static struct tegra_i2c_platform_data whistler_dvc_platform_data = {
.bus_count = 1,
.bus_clk_rate = { 400000, 0 },
.is_dvc = true,
+ .scl_gpio = {TEGRA_GPIO_PZ6, 0},
+ .sda_gpio = {TEGRA_GPIO_PZ7, 0},
+ .arb_recovery = arb_lost_recovery,
+};
+
+static struct aic326x_pdata whistler_aic3262_pdata = {
+ /* debounce time */
+ .debounce_time_ms = 512,
+};
+
+static struct i2c_board_info __initdata wm8753_board_info[] = {
+ {
+ I2C_BOARD_INFO("wm8753", 0x1a),
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_HP_DET),
+ },
+ {
+ I2C_BOARD_INFO("aic3262-codec", 0x18),
+ .platform_data = &whistler_aic3262_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_HP_DET),
+ },
};
static void whistler_i2c_init(void)
platform_device_register(&tegra_i2c_device3);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device1);
+
+ i2c_register_board_info(4, wm8753_board_info,
+ ARRAY_SIZE(wm8753_board_info));
}
#define GPIO_SCROLL(_pinaction, _gpio, _desc) \
.id = -1,
};
+static struct tegra_asoc_platform_data whistler_audio_pdata = {
+ .gpio_spkr_en = -1,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+ .debounce_time_hp = 200,
+ .i2s_param[HIFI_CODEC] = {
+ .audio_port_id = 0,
+ .is_i2s_master = 1,
+ .i2s_mode = TEGRA_DAIFMT_I2S,
+ .sample_size = 16,
+ },
+ .i2s_param[BASEBAND] = {
+ .audio_port_id = 2,
+ .is_i2s_master = 1,
+ .i2s_mode = TEGRA_DAIFMT_DSP_A,
+ .sample_size = 16,
+ .rate = 8000,
+ .channels = 1,
+ },
+ .i2s_param[BT_SCO] = {
+ .sample_size = 16,
+ .audio_port_id = 3,
+ .is_i2s_master = 1,
+ .i2s_mode = TEGRA_DAIFMT_DSP_A,
+ },
+};
+
+static struct platform_device whistler_audio_aic326x_device = {
+ .name = "tegra-snd-aic326x",
+ .id = 0,
+ .dev = {
+ .platform_data = &whistler_audio_pdata,
+ },
+};
+
+static struct platform_device whistler_audio_wm8753_device = {
+ .name = "tegra-snd-wm8753",
+ .id = 0,
+ .dev = {
+ .platform_data = &whistler_audio_pdata,
+ },
+};
+
static struct platform_device *whistler_devices[] __initdata = {
- &debug_uart,
- &tegra_uartb_device,
- &tegra_uartc_device,
- &pmu_device,
+ &tegra_pmu_device,
&tegra_udc_device,
&tegra_gart_device,
+ &tegra_aes_device,
&tegra_wdt_device,
&tegra_avp_device,
&whistler_scroll_device,
&tegra_camera,
+ &tegra_i2s_device1,
+ &tegra_i2s_device2,
+ &tegra_spdif_device,
+ &tegra_das_device,
+ &spdif_dit_device,
+ &bluetooth_dit_device,
+ &baseband_dit_device,
+ &whistler_bt_rfkill_device,
+ &tegra_pcm_device,
+ &whistler_audio_aic326x_device,
+ &whistler_audio_wm8753_device,
};
-static int __init whistler_scroll_init(void)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(scroll_keys); i++)
- tegra_gpio_enable(scroll_keys[i].gpio);
-
- return 0;
-}
-
+static struct synaptics_i2c_rmi_platform_data synaptics_pdata = {
+ .flags = SYNAPTICS_FLIP_X | SYNAPTICS_FLIP_Y | SYNAPTICS_SWAP_XY,
+ .irqflags = IRQF_TRIGGER_LOW,
+};
-static struct tegra_ehci_platform_data tegra_ehci_pdata[] = {
- [0] = {
- .phy_config = &utmi_phy_config[0],
- .operating_mode = TEGRA_USB_HOST,
- .power_down_on_bus_suspend = 0,
- },
- [1] = {
- .phy_config = &ulpi_phy_config,
- .operating_mode = TEGRA_USB_HOST,
- .power_down_on_bus_suspend = 1,
- },
- [2] = {
- .phy_config = &utmi_phy_config[1],
- .operating_mode = TEGRA_USB_HOST,
- .power_down_on_bus_suspend = 0,
+static const struct i2c_board_info whistler_i2c_touch_info[] = {
+ {
+ I2C_BOARD_INFO("synaptics-rmi-ts", 0x20),
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_PC6),
+ .platform_data = &synaptics_pdata,
},
};
-static struct platform_device *tegra_usb_otg_host_register(void)
+static int __init whistler_touch_init(void)
{
- struct platform_device *pdev;
- void *platform_data;
- int val;
-
- pdev = platform_device_alloc(tegra_ehci1_device.name,
- tegra_ehci1_device.id);
- if (!pdev)
- return NULL;
-
- val = platform_device_add_resources(pdev, tegra_ehci1_device.resource,
- tegra_ehci1_device.num_resources);
- if (val)
- goto error;
-
- pdev->dev.dma_mask = tegra_ehci1_device.dev.dma_mask;
- pdev->dev.coherent_dma_mask = tegra_ehci1_device.dev.coherent_dma_mask;
-
- platform_data = kmalloc(sizeof(struct tegra_ehci_platform_data),
- GFP_KERNEL);
- if (!platform_data)
- goto error;
-
- memcpy(platform_data, &tegra_ehci_pdata[0],
- sizeof(struct tegra_ehci_platform_data));
- pdev->dev.platform_data = platform_data;
-
- val = platform_device_add(pdev);
- if (val)
- goto error_add;
-
- return pdev;
-
-error_add:
- kfree(platform_data);
-error:
- pr_err("%s: failed to add the host contoller device\n", __func__);
- platform_device_put(pdev);
- return NULL;
-}
+ i2c_register_board_info(0, whistler_i2c_touch_info, 1);
-static void tegra_usb_otg_host_unregister(struct platform_device *pdev)
-{
- kfree(pdev->dev.platform_data);
- platform_device_unregister(pdev);
+ return 0;
}
-static struct tegra_otg_platform_data tegra_otg_pdata = {
- .host_register = &tegra_usb_otg_host_register,
- .host_unregister = &tegra_usb_otg_host_unregister,
+static struct tegra_usb_platform_data tegra_udc_pdata = {
+ .port_otg = true,
+ .has_hostpc = false,
+ .builtin_host_disabled = true,
+ .phy_intf = TEGRA_USB_PHY_INTF_UTMI,
+ .op_mode = TEGRA_USB_OPMODE_DEVICE,
+ .u_data.dev = {
+ .vbus_pmu_irq = MAX8907C_INT_BASE + MAX8907C_IRQ_VCHG_DC_R,
+ .vbus_gpio = -1,
+ .charging_supported = false,
+ .remote_wakeup_supported = false,
+ },
+ .u_cfg.utmi = {
+ .hssync_start_delay = 0,
+ .elastic_limit = 16,
+ .idle_wait_delay = 17,
+ .term_range_adj = 6,
+ .xcvr_setup = 8,
+ .xcvr_lsfslew = 2,
+ .xcvr_lsrslew = 2,
+ .xcvr_setup_offset = 0,
+ .xcvr_use_fuses = 1,
+ },
};
-static int __init whistler_gps_init(void)
-{
- tegra_gpio_enable(TEGRA_GPIO_PU4);
- return 0;
-}
+static struct tegra_usb_platform_data tegra_ehci1_utmi_pdata = {
+ .port_otg = true,
+ .has_hostpc = false,
+ .builtin_host_disabled = true,
+ .phy_intf = TEGRA_USB_PHY_INTF_UTMI,
+ .op_mode = TEGRA_USB_OPMODE_HOST,
+ .u_data.host = {
+ .vbus_gpio = TEGRA_GPIO_PN6,
+ .vbus_reg = NULL,
+ .hot_plug = true,
+ .remote_wakeup_supported = false,
+ .power_off_on_suspend = true,
+ },
+ .u_cfg.utmi = {
+ .hssync_start_delay = 9,
+ .elastic_limit = 16,
+ .idle_wait_delay = 17,
+ .term_range_adj = 6,
+ .xcvr_setup = 8,
+ .xcvr_lsfslew = 2,
+ .xcvr_lsrslew = 2,
+ },
+};
+static struct tegra_usb_otg_data tegra_otg_pdata = {
+ .ehci_device = &tegra_ehci1_device,
+ .ehci_pdata = &tegra_ehci1_utmi_pdata,
+};
+
+#define SERIAL_NUMBER_LENGTH 20
static void whistler_usb_init(void)
{
tegra_otg_device.dev.platform_data = &tegra_otg_pdata;
platform_device_register(&tegra_otg_device);
- tegra_ehci3_device.dev.platform_data=&tegra_ehci_pdata[2];
- platform_device_register(&tegra_ehci3_device);
+ tegra_udc_device.dev.platform_data = &tegra_udc_pdata;
}
static void __init tegra_whistler_init(void)
{
- char serial[20];
-
- tegra_common_init();
+ int modem_id = tegra_get_modem_id();
tegra_clk_init_from_table(whistler_clk_init_table);
whistler_pinmux_init();
whistler_i2c_init();
+ whistler_uart_init();
platform_add_devices(whistler_devices, ARRAY_SIZE(whistler_devices));
-
+ tegra_ram_console_debug_init();
whistler_sdhci_init();
whistler_regulator_init();
whistler_panel_init();
whistler_sensors_init();
+ whistler_touch_init();
whistler_kbc_init();
- whistler_bt_rfkill();
- whistler_gps_init();
whistler_usb_init();
- whistler_scroll_init();
+ whistler_emc_init();
+ if (modem_id == 0x1)
+ whistler_baseband_init();
+ whistler_setup_bluesleep();
+ tegra_release_bootloader_fb();
}
int __init tegra_whistler_protected_aperture_init(void)
if (memblock_reserve(0x0, 4096) < 0)
pr_warn("Cannot reserve first 4K of memory for safety\n");
- tegra_reserve(SZ_128M, SZ_8M, SZ_16M);
+ tegra_reserve(SZ_152M, SZ_3M, SZ_1M);
+ tegra_ram_console_debug_reserve(SZ_1M);
}
MACHINE_START(WHISTLER, "whistler")
.boot_params = 0x00000100,
- .phys_io = IO_APB_PHYS,
- .io_pg_offst = ((IO_APB_VIRT) >> 18) & 0xfffc,
- .init_irq = tegra_init_irq,
- .init_machine = tegra_whistler_init,
.map_io = tegra_map_common_io,
.reserve = tegra_whistler_reserve,
+ .init_early = tegra_init_early,
+ .init_irq = tegra_init_irq,
.timer = &tegra_timer,
+ .init_machine = tegra_whistler_init,
MACHINE_END
Code Review / linux-2.6.git / blobdiff