[ARM] 3228/1: SharpSL: Move PM code to arch/arm/common
[linux-2.6.git] / arch / arm / mach-pxa / spitz_pm.c
index 3ce7486..76a5c26 100644 (file)
@@ -21,6 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/hardware/scoop.h>
+#include <asm/hardware/sharpsl_pm.h>
 
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
@@ -33,19 +34,7 @@ static void spitz_charger_init(void)
 {
        pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
        pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-}
-
-static void spitz_charge_led(int val)
-{
-       if (val == SHARPSL_LED_ERROR) {
-               dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
-       } else if (val == SHARPSL_LED_ON) {
-               dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-       } else {
-               dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-       }
+       sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -92,7 +81,7 @@ static void spitz_discharge1(int on)
 
 static void spitz_presuspend(void)
 {
-       spitz_last_ac_status = STATUS_AC_IN();
+       spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
        /* GPIO Sleep Register */
        PGSR0 = 0x00144018;
@@ -138,7 +127,7 @@ static void spitz_postsuspend(void)
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
 {
        int is_resume = 0;
-       int acin = STATUS_AC_IN();
+       int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
        if (spitz_last_ac_status != acin) {
                if (acin) {
@@ -148,8 +137,8 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
                } else {
                        /* charge off */
                        dev_dbg(sharpsl_pm.dev, "AC Removed\n");
-                       CHARGE_LED_OFF();
-                       CHARGE_OFF();
+                       sharpsl_pm_led(SHARPSL_LED_OFF);
+                       sharpsl_pm.machinfo->charge(0);
                        sharpsl_pm.charge_mode = CHRG_OFF;
                }
                spitz_last_ac_status = acin;
@@ -175,25 +164,41 @@ static unsigned long spitz_charger_wakeup(void)
        return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
 }
 
-static int spitz_acin_status(void)
+unsigned long spitzpm_read_devdata(int type)
 {
-       return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+       switch(type) {
+       case SHARPSL_STATUS_ACIN:
+               return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+       case SHARPSL_STATUS_LOCK:
+               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+       case SHARPSL_STATUS_CHRGFULL:
+               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+       case SHARPSL_STATUS_FATAL:
+               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+       case SHARPSL_ACIN_VOLT:
+               return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
+       case SHARPSL_BATT_TEMP:
+               return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
+       case SHARPSL_BATT_VOLT:
+       default:
+               return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
+       }
 }
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
        .init             = spitz_charger_init,
+       .exit             = sharpsl_pm_pxa_remove,
        .gpio_batlock     = SPITZ_GPIO_BAT_COVER,
        .gpio_acin        = SPITZ_GPIO_AC_IN,
        .gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
        .gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
-       .status_acin      = spitz_acin_status,
        .discharge        = spitz_discharge,
        .discharge1       = spitz_discharge1,
        .charge           = spitz_charge,
-       .chargeled        = spitz_charge_led,
        .measure_temp     = spitz_measure_temp,
        .presuspend       = spitz_presuspend,
        .postsuspend      = spitz_postsuspend,
+       .read_devdata     = spitzpm_read_devdata,
        .charger_wakeup   = spitz_charger_wakeup,
        .should_wakeup    = spitz_should_wakeup,
        .bat_levels       = 40,