Merge branch 'next' into for-linus-3.0
[linux-2.6.git] / arch / arm / mach-ep93xx / core.c
index bf6bd71..dd87a82 100644 (file)
@@ -3,6 +3,7 @@
  * Core routines for Cirrus EP93xx chips.
  *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
  * Thanks go to Michael Burian and Ray Lehtiniemi for their key
  * role in the ep93xx linux community.
  * your option) any later version.
  */
 
-#include <linux/config.h>
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/time.h>
+#include <linux/dma-mapping.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
+#include <mach/ep93xx_spi.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
 
 #include <asm/hardware/vic.h>
 
@@ -94,42 +87,70 @@ void __init ep93xx_map_io(void)
  * to use this timer for something else.  We also use timer 4 for keeping
  * track of lost jiffies.
  */
-static unsigned int last_jiffy_time;
+#define EP93XX_TIMER_REG(x)            (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD             EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE            EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL          EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE   (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR            EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD             EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE            EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL          EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR            EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW                EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH       EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE        (1 << 8)
+#define EP93XX_TIMER3_LOAD             EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE            EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL          EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR            EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_TIMER123_CLOCK          508469
+#define EP93XX_TIMER4_CLOCK            983040
+
+#define TIMER1_RELOAD                  ((EP93XX_TIMER123_CLOCK / HZ) - 1)
+#define TIMER4_TICKS_PER_JIFFY         DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
-#define TIMER4_TICKS_PER_JIFFY         ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+static unsigned int last_jiffy_time;
 
-static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
-       write_seqlock(&xtime_lock);
-
+       /* Writing any value clears the timer interrupt */
        __raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+       /* Recover lost jiffies */
        while ((signed long)
                (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
                                                >= TIMER4_TICKS_PER_JIFFY) {
                last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
-               timer_tick(regs);
+               timer_tick();
        }
 
-       write_sequnlock(&xtime_lock);
-
        return IRQ_HANDLED;
 }
 
 static struct irqaction ep93xx_timer_irq = {
        .name           = "ep93xx timer",
-       .flags          = SA_INTERRUPT | SA_TIMER,
+       .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
        .handler        = ep93xx_timer_interrupt,
 };
 
 static void __init ep93xx_timer_init(void)
 {
+       u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+                   EP93XX_TIMER123_CONTROL_CLKSEL;
+
        /* Enable periodic HZ timer.  */
-       __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
-       __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
-       __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+       __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+       __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+       __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+                       EP93XX_TIMER1_CONTROL);
 
        /* Enable lost jiffy timer.  */
-       __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+       __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+                       EP93XX_TIMER4_VALUE_HIGH);
 
        setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
@@ -151,215 +172,74 @@ struct sys_timer ep93xx_timer = {
 
 
 /*************************************************************************
- * GPIO handling for EP93xx
+ * EP93xx IRQ handling
  *************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
-
-static void update_gpio_ab_int_params(int port)
-{
-       if (port == 0) {
-               __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
-               __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
-               __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
-               __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
-       } else if (port == 1) {
-               __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
-               __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
-               __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
-               __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
-       }
-}
-
-
-static unsigned char data_register_offset[8] = {
-       0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
-};
-
-static unsigned char data_direction_register_offset[8] = {
-       0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
-};
-
-void gpio_line_config(int line, int direction)
-{
-       unsigned int data_direction_register;
-       unsigned long flags;
-       unsigned char v;
-
-       data_direction_register =
-               EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
-
-       local_irq_save(flags);
-       if (direction == GPIO_OUT) {
-               if (line >= 0 && line < 16) {
-                       gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
-                       update_gpio_ab_int_params(line >> 3);
-               }
-
-               v = __raw_readb(data_direction_register);
-               v |= 1 << (line & 7);
-               __raw_writeb(v, data_direction_register);
-       } else if (direction == GPIO_IN) {
-               v = __raw_readb(data_direction_register);
-               v &= ~(1 << (line & 7));
-               __raw_writeb(v, data_direction_register);
-       }
-       local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
+extern void ep93xx_gpio_init_irq(void);
 
-int gpio_line_get(int line)
+void __init ep93xx_init_irq(void)
 {
-       unsigned int data_register;
-
-       data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+       vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+       vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
-       return !!(__raw_readb(data_register) & (1 << (line & 7)));
-}
-EXPORT_SYMBOL(gpio_line_get);
-
-void gpio_line_set(int line, int value)
-{
-       unsigned int data_register;
-       unsigned long flags;
-       unsigned char v;
-
-       data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
-
-       local_irq_save(flags);
-       if (value == EP93XX_GPIO_HIGH) {
-               v = __raw_readb(data_register);
-               v |= 1 << (line & 7);
-               __raw_writeb(v, data_register);
-       } else if (value == EP93XX_GPIO_LOW) {
-               v = __raw_readb(data_register);
-               v &= ~(1 << (line & 7));
-               __raw_writeb(v, data_register);
-       }
-       local_irq_restore(flags);
+       ep93xx_gpio_init_irq();
 }
-EXPORT_SYMBOL(gpio_line_set);
 
 
 /*************************************************************************
- * EP93xx IRQ handling
+ * EP93xx System Controller Software Locked register handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-               struct irqdesc *desc, struct pt_regs *regs)
-{
-       unsigned char status;
-       int i;
 
-       status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
-       for (i = 0; i < 8; i++) {
-               if (status & (1 << i)) {
-                       desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
-                       desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
-               }
-       }
-
-       status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
-       for (i = 0; i < 8; i++) {
-               if (status & (1 << i)) {
-                       desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
-                       desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
-               }
-       }
-}
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
 
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 {
-       int line = irq - IRQ_EP93XX_GPIO(0);
-       int port = line >> 3;
-
-       gpio_int_enable[port] &= ~(1 << (line & 7));
-       update_gpio_ab_int_params(port);
+       unsigned long flags;
 
-       if (line >> 3) {
-               __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
-       } else {
-               __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
-       }
-}
+       spin_lock_irqsave(&syscon_swlock, flags);
 
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
-{
-       int line = irq - IRQ_EP93XX_GPIO(0);
-       int port = line >> 3;
+       __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+       __raw_writel(val, reg);
 
-       gpio_int_enable[port] &= ~(1 << (line & 7));
-       update_gpio_ab_int_params(port);
+       spin_unlock_irqrestore(&syscon_swlock, flags);
 }
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
 
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 {
-       int line = irq - IRQ_EP93XX_GPIO(0);
-       int port = line >> 3;
-
-       gpio_int_enable[port] |= 1 << (line & 7);
-       update_gpio_ab_int_params(port);
-}
+       unsigned long flags;
+       unsigned int val;
 
+       spin_lock_irqsave(&syscon_swlock, flags);
 
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
-{
-       int port;
-       int line;
-
-       line = irq - IRQ_EP93XX_GPIO(0);
-       gpio_line_config(line, GPIO_IN);
-
-       port = line >> 3;
-       line &= 7;
-
-       if (type & IRQT_RISING) {
-               gpio_int_type1[port] |= 1 << line;
-               gpio_int_type2[port] |= 1 << line;
-       } else if (type & IRQT_FALLING) {
-               gpio_int_type1[port] |= 1 << line;
-               gpio_int_type2[port] &= ~(1 << line);
-       } else if (type & IRQT_HIGH) {
-               gpio_int_type1[port] &= ~(1 << line);
-               gpio_int_type2[port] |= 1 << line;
-       } else if (type & IRQT_LOW) {
-               gpio_int_type1[port] &= ~(1 << line);
-               gpio_int_type2[port] &= ~(1 << line);
-       }
-       update_gpio_ab_int_params(port);
+       val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+       val &= ~clear_bits;
+       val |= set_bits;
+       __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+       __raw_writel(val, EP93XX_SYSCON_DEVCFG);
 
-       return 0;
+       spin_unlock_irqrestore(&syscon_swlock, flags);
 }
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
 
-static struct irqchip ep93xx_gpio_ab_irq_chip = {
-       .ack            = ep93xx_gpio_ab_irq_mask_ack,
-       .mask           = ep93xx_gpio_ab_irq_mask,
-       .unmask         = ep93xx_gpio_ab_irq_unmask,
-       .set_type       = ep93xx_gpio_ab_irq_type,
-};
-
-
-void __init ep93xx_init_irq(void)
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See <mach/platform.h> for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
 {
-       int irq;
-
-       vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-       vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+       unsigned int v;
 
-       for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
-               set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
-               set_irq_handler(irq, do_level_IRQ);
-               set_irq_flags(irq, IRQF_VALID);
-       }
-       set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+       v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+       v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+       v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+       return v;
 }
 
-
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -371,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
        unsigned int mcr;
 
        mcr = 0;
-       if (!(mctrl & TIOCM_RTS))
+       if (mctrl & TIOCM_RTS)
                mcr |= 2;
-       if (!(mctrl & TIOCM_DTR))
+       if (mctrl & TIOCM_DTR)
                mcr |= 1;
 
        __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
@@ -385,7 +265,7 @@ static struct amba_pl010_data ep93xx_uart_data = {
 
 static struct amba_device uart1_device = {
        .dev            = {
-               .bus_id         = "apb:uart1",
+               .init_name      = "apb:uart1",
                .platform_data  = &ep93xx_uart_data,
        },
        .res            = {
@@ -399,7 +279,7 @@ static struct amba_device uart1_device = {
 
 static struct amba_device uart2_device = {
        .dev            = {
-               .bus_id         = "apb:uart2",
+               .init_name      = "apb:uart2",
                .platform_data  = &ep93xx_uart_data,
        },
        .res            = {
@@ -413,7 +293,7 @@ static struct amba_device uart2_device = {
 
 static struct amba_device uart3_device = {
        .dev            = {
-               .bus_id         = "apb:uart3",
+               .init_name      = "apb:uart3",
                .platform_data  = &ep93xx_uart_data,
        },
        .res            = {
@@ -426,28 +306,588 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+       {
+               .start          = EP93XX_RTC_PHYS_BASE,
+               .end            = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+               .flags          = IORESOURCE_MEM,
+       },
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+       .name           = "ep93xx-rtc",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(ep93xx_rtc_resource),
+       .resource       = ep93xx_rtc_resource,
 };
 
 
-void __init ep93xx_init_devices(void)
+static struct resource ep93xx_ohci_resources[] = {
+       [0] = {
+               .start  = EP93XX_USB_PHYS_BASE,
+               .end    = EP93XX_USB_PHYS_BASE + 0x0fff,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = IRQ_EP93XX_USB,
+               .end    = IRQ_EP93XX_USB,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+
+static struct platform_device ep93xx_ohci_device = {
+       .name           = "ep93xx-ohci",
+       .id             = -1,
+       .dev            = {
+               .dma_mask               = &ep93xx_ohci_device.dev.coherent_dma_mask,
+               .coherent_dma_mask      = DMA_BIT_MASK(32),
+       },
+       .num_resources  = ARRAY_SIZE(ep93xx_ohci_resources),
+       .resource       = ep93xx_ohci_resources,
+};
+
+
+/*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &ep93xx_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width:     bank width in octets
+ * @start:     resource start address
+ * @size:      resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+                                 resource_size_t start, resource_size_t size)
 {
-       unsigned int v;
+       ep93xx_flash_data.width         = width;
+
+       ep93xx_flash_resource.start     = start;
+       ep93xx_flash_resource.end       = start + size - 1;
+
+       platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
+static struct ep93xx_eth_data ep93xx_eth_data;
+
+static struct resource ep93xx_eth_resource[] = {
+       {
+               .start  = EP93XX_ETHERNET_PHYS_BASE,
+               .end    = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_EP93XX_ETHERNET,
+               .end    = IRQ_EP93XX_ETHERNET,
+               .flags  = IORESOURCE_IRQ,
+       }
+};
+
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_eth_device = {
+       .name           = "ep93xx-eth",
+       .id             = -1,
+       .dev            = {
+               .platform_data          = &ep93xx_eth_data,
+               .coherent_dma_mask      = DMA_BIT_MASK(32),
+               .dma_mask               = &ep93xx_eth_dma_mask,
+       },
+       .num_resources  = ARRAY_SIZE(ep93xx_eth_resource),
+       .resource       = ep93xx_eth_resource,
+};
+
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data:      platform specific ethernet configuration (__initdata)
+ * @copy_addr: flag indicating that the MAC address should be copied
+ *             from the IndAd registers (as programmed by the bootloader)
+ */
+void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
+{
+       if (copy_addr)
+               memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
+       ep93xx_eth_data = *data;
+       platform_device_register(&ep93xx_eth_device);
+}
+
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
+
+static struct platform_device ep93xx_i2c_device = {
+       .name           = "i2c-gpio",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &ep93xx_i2c_data,
+       },
+};
+
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @data:      platform specific i2c-gpio configuration (__initdata)
+ * @devices:   platform specific i2c bus device information (__initdata)
+ * @num:       the number of devices on the i2c bus
+ */
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+                               struct i2c_board_info *devices, int num)
+{
        /*
-        * Disallow access to MaverickCrunch initially.
+        * Set the EEPROM interface pin drive type control.
+        * Defines the driver type for the EECLK and EEDAT pins as either
+        * open drain, which will require an external pull-up, or a normal
+        * CMOS driver.
         */
-       v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-       v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-       __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-       __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+       if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+               pr_warning("sda != EEDAT, open drain has no effect\n");
+       if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+               pr_warning("scl != EECLK, open drain has no effect\n");
+
+       __raw_writel((data->sda_is_open_drain << 1) |
+                    (data->scl_is_open_drain << 0),
+                    EP93XX_GPIO_EEDRIVE);
+
+       ep93xx_i2c_data = *data;
+       i2c_register_board_info(0, devices, num);
+       platform_device_register(&ep93xx_i2c_device);
+}
+
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+
+static struct resource ep93xx_spi_resources[] = {
+       {
+               .start  = EP93XX_SPI_PHYS_BASE,
+               .end    = EP93XX_SPI_PHYS_BASE + 0x18 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+       {
+               .start  = IRQ_EP93XX_SSP,
+               .end    = IRQ_EP93XX_SSP,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_spi_device = {
+       .name           = "ep93xx-spi",
+       .id             = 0,
+       .dev            = {
+               .platform_data          = &ep93xx_spi_master_data,
+               .coherent_dma_mask      = DMA_BIT_MASK(32),
+               .dma_mask               = &ep93xx_spi_dma_mask,
+       },
+       .num_resources  = ARRAY_SIZE(ep93xx_spi_resources),
+       .resource       = ep93xx_spi_resources,
+};
+
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+                               struct spi_board_info *devices, int num)
+{
+       /*
+        * When SPI is used, we need to make sure that I2S is muxed off from
+        * SPI pins.
+        */
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+
+       ep93xx_spi_master_data = *info;
+       spi_register_board_info(devices, num);
+       platform_device_register(&ep93xx_spi_device);
+}
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+       {
+               .name   = "platform:grled",
+               .gpio   = EP93XX_GPIO_LINE_GRLED,
+       }, {
+               .name   = "platform:rdled",
+               .gpio   = EP93XX_GPIO_LINE_RDLED,
+       },
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+       .num_leds       = ARRAY_SIZE(ep93xx_led_pins),
+       .leds           = ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+       .name           = "leds-gpio",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &ep93xx_led_data,
+       },
+};
+
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+       {
+               .start  = EP93XX_PWM_PHYS_BASE,
+               .end    = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+       .name           = "ep93xx-pwm",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(ep93xx_pwm0_resource),
+       .resource       = ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+       {
+               .start  = EP93XX_PWM_PHYS_BASE + 0x20,
+               .end    = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+       .name           = "ep93xx-pwm",
+       .id             = 1,
+       .num_resources  = ARRAY_SIZE(ep93xx_pwm1_resource),
+       .resource       = ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+       if (pwm0)
+               platform_device_register(&ep93xx_pwm0_device);
+
+       /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+       if (pwm1)
+               platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+       int err;
+
+       if (pdev->id == 0) {
+               err = 0;
+       } else if (pdev->id == 1) {
+               err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+                                  dev_name(&pdev->dev));
+               if (err)
+                       return err;
+               err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+               if (err)
+                       goto fail;
+
+               /* PWM 1 output on EGPIO[14] */
+               ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+       } else {
+               err = -ENODEV;
+       }
+
+       return err;
+
+fail:
+       gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+       return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+       if (pdev->id == 1) {
+               gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+               gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+               /* EGPIO[14] used for GPIO */
+               ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+       }
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+       {
+               .start          = EP93XX_RASTER_PHYS_BASE,
+               .end            = EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
+               .flags          = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device ep93xx_fb_device = {
+       .name                   = "ep93xx-fb",
+       .id                     = -1,
+       .dev                    = {
+               .platform_data          = &ep93xxfb_data,
+               .coherent_dma_mask      = DMA_BIT_MASK(32),
+               .dma_mask               = &ep93xx_fb_device.dev.coherent_dma_mask,
+       },
+       .num_resources          = ARRAY_SIZE(ep93xx_fb_resource),
+       .resource               = ep93xx_fb_resource,
+};
+
+static struct platform_device ep93xx_bl_device = {
+       .name           = "ep93xx-bl",
+       .id             = -1,
+};
+
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data:      platform specific framebuffer configuration (__initdata)
+ */
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+       ep93xxfb_data = *data;
+       platform_device_register(&ep93xx_fb_device);
+       platform_device_register(&ep93xx_bl_device);
+}
+
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
+
+static struct resource ep93xx_keypad_resource[] = {
+       {
+               .start  = EP93XX_KEY_MATRIX_PHYS_BASE,
+               .end    = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_EP93XX_KEY,
+               .end    = IRQ_EP93XX_KEY,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device ep93xx_keypad_device = {
+       .name           = "ep93xx-keypad",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &ep93xx_keypad_data,
+       },
+       .num_resources  = ARRAY_SIZE(ep93xx_keypad_resource),
+       .resource       = ep93xx_keypad_resource,
+};
+
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data:      platform specific keypad configuration (__initdata)
+ */
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+       ep93xx_keypad_data = *data;
+       platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+       int err;
+       int i;
+
+       for (i = 0; i < 8; i++) {
+               err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+               if (err)
+                       goto fail_gpio_c;
+               err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+               if (err)
+                       goto fail_gpio_d;
+       }
+
+       /* Enable the keypad controller; GPIO ports C and D used for keypad */
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                                EP93XX_SYSCON_DEVCFG_GONK);
+
+       return 0;
+
+fail_gpio_d:
+       gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+       for ( ; i >= 0; --i) {
+               gpio_free(EP93XX_GPIO_LINE_C(i));
+               gpio_free(EP93XX_GPIO_LINE_D(i));
+       }
+       return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+       int i;
+
+       for (i = 0; i < 8; i++) {
+               gpio_free(EP93XX_GPIO_LINE_C(i));
+               gpio_free(EP93XX_GPIO_LINE_D(i));
+       }
+
+       /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+       ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                              EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+       {
+               .start  = EP93XX_I2S_PHYS_BASE,
+               .end    = EP93XX_I2S_PHYS_BASE + 0x100 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device ep93xx_i2s_device = {
+       .name           = "ep93xx-i2s",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(ep93xx_i2s_resource),
+       .resource       = ep93xx_i2s_resource,
+};
+
+static struct platform_device ep93xx_pcm_device = {
+       .name           = "ep93xx-pcm-audio",
+       .id             = -1,
+};
+
+void __init ep93xx_register_i2s(void)
+{
+       platform_device_register(&ep93xx_i2s_device);
+       platform_device_register(&ep93xx_pcm_device);
+}
+
+#define EP93XX_SYSCON_DEVCFG_I2S_MASK  (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
+                                        EP93XX_SYSCON_DEVCFG_I2SONAC97)
+
+#define EP93XX_I2SCLKDIV_MASK          (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
+                                        EP93XX_SYSCON_I2SCLKDIV_SPOL)
+
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+{
+       unsigned val;
+
+       /* Sanity check */
+       if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
+               return -EINVAL;
+       if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
+               return -EINVAL;
+
+       /* Must have only one of I2SONSSP/I2SONAC97 set */
+       if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
+           (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
+               return -EINVAL;
+
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+       ep93xx_devcfg_set_bits(i2s_pins);
+
+       /*
+        * This is potentially racy with the clock api for i2s_mclk, sclk and 
+        * lrclk. Since the i2s driver is the only user of those clocks we
+        * rely on it to prevent parallel use of this function and the 
+        * clock api for the i2s clocks.
+        */
+       val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+       val &= ~EP93XX_I2SCLKDIV_MASK;
+       val |= i2s_config;
+       ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
+
+       return 0;
+}
+EXPORT_SYMBOL(ep93xx_i2s_acquire);
+
+void ep93xx_i2s_release(void)
+{
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+}
+EXPORT_SYMBOL(ep93xx_i2s_release);
+
+/*************************************************************************
+ * EP93xx AC97 audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_ac97_resources[] = {
+       {
+               .start  = EP93XX_AAC_PHYS_BASE,
+               .end    = EP93XX_AAC_PHYS_BASE + 0xac - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+       {
+               .start  = IRQ_EP93XX_AACINTR,
+               .end    = IRQ_EP93XX_AACINTR,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device ep93xx_ac97_device = {
+       .name           = "ep93xx-ac97",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(ep93xx_ac97_resources),
+       .resource       = ep93xx_ac97_resources,
+};
+
+void __init ep93xx_register_ac97(void)
+{
+       /*
+        * Make sure that the AC97 pins are not used by I2S.
+        */
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
+
+       platform_device_register(&ep93xx_ac97_device);
+       platform_device_register(&ep93xx_pcm_device);
+}
+
+extern void ep93xx_gpio_init(void);
+
+void __init ep93xx_init_devices(void)
+{
+       /* Disallow access to MaverickCrunch initially */
+       ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
+
+       ep93xx_gpio_init();
 
        amba_device_register(&uart1_device, &iomem_resource);
        amba_device_register(&uart2_device, &iomem_resource);
        amba_device_register(&uart3_device, &iomem_resource);
 
        platform_device_register(&ep93xx_rtc_device);
+       platform_device_register(&ep93xx_ohci_device);
+       platform_device_register(&ep93xx_leds);
 }